Transcript
INTELLAPATCH®
36-Port Multi-Rate, Multi-Protocol 36 Ports of 1G & 10G Ethernet or SONET Connectivity
INTELLAPATCH 36-port blade
HIGH-DENSITY 36-PORT BLADE This 36 port INTELLAPATCH blade provides 36 ports of fiber optic network connectivity. The single-chassis maximum port count with this blade is 144 when installed in the the four-blade chassis. This blade supports low latency point-to-point (full duplex or simplex), multicast (1 to N), and loop topologies.
BLADE FUNCTIONALITY Backplane Ports
Control
IBL Ports (SGMII/10GBASE-R)
12V Power
10G Port
IBL Ports (SGMII/10GBASE-R)
10G Port
Control CPU
Hot Swap Circuit
Signal Conditioning
1
3
5
7
9
11
13
15
17
19
21
23
Power
25
27
29
31
33
35
23
24
34
36
Multi-Rate 10 Gbps Status
INTELLAPATCH® Blade ACI-3010-E36-7
Power 2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
(36) SFP+ Ports
Front Connectors The 36-port INTELLAPATCH fiber optic blade offers both 1G/10G Ethernet and the OC-192 SONET protocol in the first firmware release. This blade also offers 36 10G inter-blade link (IBL) ports to the switch backplane. Please see page 2 for a complete chassis and blade compatibility list.
D
A T
A
S
H
E
E
T
INTELLAPATCH® — 36-Port Multi-Rate, Multi-Protocol BLADE SPECIFICATIONS Description
• 36-Port Multi-Protocol Blade − Multi-Rate Optical Fiber
Protocols
• Ethernet 1Gbps, Ethernet 10Gbps, OC-192; Fast Ethernet*, FDDI*, OC-3*, OC-12*, 1G FC*, 1GE*, 2G FC*, OC-48*, 4G FC*, 8G FC*, CPRI*, 10G FC*, CPRI*
Physical Interfaces
• 36 SFP/SFP+
Backplane Interfaces
• 36 10GBASE-R SGMII
Media Conversion
• Yes
Rate Conversion
• No
Dimensions
• 14.45" W × 8.00" D × 1.50" H (36.7 cm W × 20.3 cm D × 3.8 cm H)
Power
• 110 Watts (all ports linked at 10 Gbps)
Thermal Load
• 375.0 BTU/hr
Weight
• 3.0 lbs (1.36 kg) with no transceivers installed
Panel Status
• Power, Status and 2 LED per port for Link and signal status
Temperature Ranges
• Operating Temperature: 32° to 113° F (0° to 45° C) • Storage Temperature: -40° to 158° F (-40° to 70° C) • Humidity: 10% to 85% (noncondensing)
Services and Manageability
• CLI
• LDAP
• RADIUS
• SSHv2
• Web interface
• SNMP: v1, v2, v3
• TACACS+
• HTTP/HTTPS
* Future. Only OC-192 and 10Gbps Ethernet supported in initial firmware release.
BLADE COMPATIBILITY INTELLAPATCH® Series 3000 Chassis Compatibility
• 2RU Extended Capacity 72 Port Switch Chassis – ACI-3072-XE • 4RU Extended Capacity 144 Port Switch Chassis – ACI-3144-XE
ORDERING INFORMATION Model #
• ACI-3010-E36-7 — INTELLAPATCH Multi Rate Blade – 36 Port Optical Multi Rate Blade SFPs must be purchased separately. • ACI-3010-E36-7S-01 — INTELLAPATCH Multi Rate Blade – 36 Port Optical Multi Rate Blade Includes 36 Dual Rate OC-192/STM-64, 10GE Single Mode SFP+ transceivers (ACI-0202-195-R), or 10GE Multimode SFP+ transceivers (ACI-0201-196-R)
Warranty Period
• 1 Year Warranty included with all purchases • Advanced Maintenance and Support options available
APCON, Inc. ▪ apcon.com ▪ +1 503–682–4050 ▪ 800–624–6808 © 2014 APCON, Inc. All Rights Reserved. INTELLAPATCH® is a Registered Trademark of APCON, Inc. @APCON ▪ company/APCON ▪ APCON is an Equal Opportunity Employer – MFDV 14032-R7-1214
