Preview only show first 10 pages with watermark. For full document please download

Compression Drivers / Ferrite Cdx1-1447

   EMBED

Share

Transcript

Compression Drivers / Ferrite General Specifications CDX1-1447 Power rating 35Wrms 1 Continuous power rating 70W 2 Nominal impedance 8Ω Frequency range Sensitivity 1500-20,000Hz 106dB 3 Recommended min. crossover (12dB/oct) Voice coil diameter 2200Hz 35mm/1.4in Voice coil material Copper clad aluminium Magnet type Ferrite Diaphragm material Polyimide Surround material Polyimide Mounting Information 1" exit, ferrite magnet compression driver with 1.4-inch diameter copper Width 90mm/3.54in clad aluminium voice coil Depth 46.5mm/1.83in 35Wrms (AES standard) power handling and 106dB sensitivity Weight One piece polyimide diaphragm and surround Fitting 1kg/2.2lb Flange (4 x M6 holes on 76mm Finite Element Analysis (FEA) techniques used to optimise both magnetic /3in PCD) and acoustic design Throat exit 25mm/1in Suitable for 2-way and 3-way systems Packed Dimensions & Weight 8 Ω Frequency Response Single pack size W x D x H 110mm x 98mm x 81mm / 4.3in x 3.9in x 3.2in Single pack weight Multi pack size W x D x H 1.5kg/3.3lb 495mm x 495mm x 90mm / 19.5in x 19.5in x 3.5in Multi pack weight 17kg/37.4lb 1. Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. 2. Continuous Power Handling is defined as 3dB greater than the AES rating. 3. Measured on axis at 1W, 1m, using typical horn, in 2 anechoic environment. Celestion, Claydon Business Park, Great Blakenham, Ipswich, IP6 0NL United Kingdom