Conderoc - Equipment Journal

Transcript

MAY 29, 2017 ISSUE 7 NEXT ISSUE: JUNE 19, 2017 NEXT FOCUS: OIL & GAS/LOADERS MTI JOY LT210, only 1700 hours since new RENTALS OF EXCAVATORS WITH ATTACHMENTS Sales, Rentals & Rental Purchase Since 1976 JOHN DEERE 844K II (2012) 5144 Hours 7.25 CU. YD. Teflon Lined Bucket Scale Rear View Camera Used in Light Application Very Clean Loader 2 Available Price: $305,000 Each N POWERTRAITILL WARRANTY 19 MARCH 20 Call John or Mark at: 1-800-265-5747 705-566-8190 [email protected] www.bmcdowell.com See Our Ad on A21 MAXIMUM PRODUCTIVITY FOR THE PROFIT END OF YOUR MACHINERY 1-800-268-0182 [email protected] SEE OUR AD or ON PAGE A6 Rosaire in Timmins at: 1-705-268-3311 www.marcelequipment.com ÉQUIPEMENT CONDEROC EQUIPMENT THE SCREEN MACHINE Hydraulic Breakers / Compactors 1-877-640-2862 www.magnumattachments.com Tiltrotators • Hydraulic Breakers • Compactors • Multi-Quick Processors • Pulverizers • Static Pulverizers • Shears • Screening Buckets • Sorting Grapples North 647-235-0807• 450-745-0303 www.conderoc.com 1-800-489-4502 www.breakersdrillsamerica.com 1-866-TOPLIFT Since 1946 DEERE 750K XLT (14) EROPS, PAT, TOPCON READY, 955 HOURS. $235,000 855.865.7560 [email protected] (416) 236-5425 SEE PAGE B16 FOR MORE EQUIPMENT RENTALS • SALES • SERVICE LOADSTAR TRAILERS INC. Leading in Trailing G.E.T. TOUGH www.essltd.com SINCE 1946 Jim Walsh [email protected] 416-358-3192 See our ad on page A11 LOADSTAR TRAILERS INC. LOWBEDS - TAG-A-LONGS 905-885-0744 TRANSPORTERS - SPECIALIZED LARGE OR SMALL LOADSTAR PARON CAN OFFER THEM ALL Publications Mail Agreement: 40063867 A2 MAY 29, 2017 @EQUIPJOURNAL EQUIPMENT JOURNAL IS AN AUDITED PUBLICATION ADVERTISER INDEX MAY 29/2017 306-634-9911.................................................................. A7 Acklands and Grainger.................................................... A23 Alden Equipment Inc.................................................... A1,A5 Amaco Construction Equipment Inc................................. A22 AMI Attachments.............................................................. A1 Ammann .......................................................................... B2 BEC Equipment................................................................. B5 Bobcat Dealers............................................................... B13 BPT Components and Parts Inc....................................... A15 Brandt Tractor Ltd........................................................... A10 Brandt Value Parts............................................................ B9 Breakers/Drills North America Inc...................................... A1 Canadian Port & Heavy Equipment Sales........................... B4 Central Diesel Service....................................................... A4 Conderoc Inc.............................................................. A1,A19 Converterman Limited...................................................... B5 Cooper Equipment Rentals................................................ A1 Creighton Rock Drill Limited............................................ A11 Equipment Sales & Service Limited............................ A1,A17 Gear Equipment................................................................ B7 Hammerock.................................................................... A21 Hammond Air Conditioning.............................................. B12 Harding Equipment Inc.................................................... A20 High Reach Inc................................................................ A18 Hub Equipment ......................................................... A1,B16 Hydrolexc......................................................................... B9 Innotag Distributors........................................................ B12 Jade Equipment.............................................................. A16 JCB Inc........................................................................... A24 John Deere Dealers................................................. A12,A13 LBX Link-Belt Excavators................................................ A18 LePage Equipment.......................................................... A20 Loadstar Trailers........................................................ A1,A11 Lund Appraisals.............................................................. B13 Published every third Monday at 6-5160 Explorer Dr., Mississauga, (Toronto). Subscription $44. per annum or $72. for 2 years including applicable tax., Payable in advance. Single copy $3.95. Authorized as Publications Mail Agreement No. 40063867, by the Post Office Dept. Ottawa and for payment in cash. Advertising is accepted on the condition that in the event of typographical error, that portion of the advertising space occupied by the error together with reasonable allowance for signature will not be charged for, but the balance of the advertisement will be paid for at the applicable rate. In the event of a typographical error advertising goods or services may not be sold. Advertising is merely an offer to sell and may be withdrawn at any time. We reserve the right to reject or refuse any or all advertising. Equipment Journal permission is required to reproduce original ad layout, artwork and photos. H.S.T. # 10403 7957 RT M-K Power Products Corp............................................... A15 Mactek Technologies...................................................... A19 Magnum Attachments....................................................... A1 Manulift EMI..................................................................... A9 Marcel Equipment Limited........................................... A1,A6 McDowell B Equipment Ltd........................................ A1,A21 Moore JCB...................................................................... A22 Morgan’s Diesel Industrial Truck Parts...................... B10,B11 N. Johnson Limited......................................................... A17 Nortrax Canada Inc........................................................... A5 OBW Equipment................................................................ A1 Ontario Control Cables...................................................... B4 Pine Ridge Lisco Edwards................................................. A9 Powerscreen of Canada.................................................... A2 ReadyQuip........................................................................ B7 Reid Equipment Solutions................................................. B9 Roadtec............................................................................ A8 Screen Machine Industries Inc........................................ A19 Selix Equipment................................................................ A4 Shaw Bros.Quality Attachments...................................... A18 Strongco Corporation ..................................................... A14 Tarten Equipment Limited.......................................... A16,B6 The Gear Centre....................................................... A22,B12 Toplift Enterprises............................................................. A1 Toromont CAT.............................................................. A7,B1 Tramac............................................................................. B6 Tri-City Equipment.......................................................... A15 Valley Blades Limited...................................................... B14 W Green Technologies..................................................... B14 AUCTIONS BidSpotter Inc................................................................... A1 Corporate Assets............................................................ B13 Ritchie Bros.................................................................... B15 Sure-Bid ........................................................................ B14 CONTACT US Editor Nathan Medcalf [email protected] General Manager Mark Baker [email protected] Sales Manager Tara Rosen [email protected] Creative Director/Creative Services Ryan Chuhaniuk [email protected] National Account Manager Mona Fahmi [email protected] Circulation/Subscriptions Marisa Mahato [email protected] PACE PUBLISHING LIMITED EQUIPMENT JOURNAL 5160 Explorer Drive, #6 Mississauga, ON, L4W 4T7, Canada LOCAL: (905) 629-7500 EMAIL US: [email protected] TOLL-FREE: CDN/USA 1-800-667-8541 WEBSITE: www.equipmentjournal.com FAX: 1-800-210-5799 @EQUIPJOURNAL MAY 29, 2017 ISSUE DOWNLOAD OUR FREE APP TODAY! INSIDE THIS ISSUE 7 / MAY 29, 2017 A3 NEXT ISSUE: JUNE 19, 2017 NEXT FOCUS: OIL & GAS/LOADERS The Power of New Solutions A12 ENERGY DIVERSITY STAGE V VISION OPTIMIZATION CONNECTIVITY EQUIPMENT FOCUS ROADBUILDING [B3] EQUIPMENT FOCUS MINING [B8] FEATURED STORIES PAGE A4 New trucks announced at ExpoCam PAGE A11 Rotating telehandler beats scaffolding in bridge work PAGE A17 Ontario’s best skilled trades students compete PAGE A21 Ritchie Bros. auction dominated by Cat equipment PAGE B5 Choose between vibration & oscillaton with new roller PAGE B12 JoyCut program improves cutting in underground mining Welcome to Issue #7: Roadbuilding & Maintenance and Mining. I will be at the Canada North Resources Expo in Prince George, B.C., May 2627. The show is a showcase of the resources sectors’ leading companies and products; the event covers four acres of indoor and outdoor space with tons of big iron. In this issue, we are featuring mining. Mining is important to B.C. A recent report by PricewaterhouseCoopers states t hat t he mining industry, especially in B.C., has a lot to be optimistic about. According to the report, the stability of prices and a more optimistic industry outlook have led to increased investment in the sector. As well, the Federal and B.C. governments have renewed initiatives designed to boost mining. In March, the Federal Government extended the Mineral Exploration Tax Cred it (METC) t h roug h March 2018. The METC is a measure designed to encourage junior mining companies to raise new equity through flow-through shares to finance early stage grassroots exploration. The B.C. Government stated in this year’s provincial budget that it will extend its B.C. mining flow-through share tax credit through December 31, 2017. Mining companies are also in a stronger position financially. “Gross mining revenue from survey participants was reported as $8.7 billion compared to $7.7 billion in 2015 and $8.2 billion in 2014. The 2016 year-over-year increase was driven almost entirely by increased coking coal sales, amid higher coal prices,” states the report. Also, cash flow from operations was $2.6 billion in 2016, up from $1.7 billion in 2015. E mploy ment a lso i n- Nathan Medcalf // Editor [email protected] creased. Survey respondents reported 9,329 people employed in mining, which is up from 9,221 in 2015. We completed our social media thank-you campaign. A total of 8 people who followed/liked/subscribed to one of Equipment Journal’s social media platforms or signed up for our newsletter won either a gift card or a model replica of a machine. And, thank you to Advance Construction Equipment, Bobcat of Toronto, a nd Strongco Equipment for providing the model replicas. A4 MAY 29, 2017 @EQUIPJOURNAL Many Manufacturers Announce New Trucks at ExpoCam With more than 200,000 s q u a r e -f e e t o f e x h i b i t space, and nearly 300 exhibitors, ExpoCam is the place for those in the trucking industry to learn about emerging technologies, industry trends, best practises; research, compare, and connect with various vendors under one roof; and search jobs from 25 potential employers seeking drivers and other industry professionals. At the show, which took place April 20-22 at Place Bonaventure in Montreal, Kenworth, Navistar, Mack, and Volvo announced new Therese factory,” said Mike trucks. Parent, General Manager of Kenworth Montreal, which KENWORTH MEDIUM DUTY has sent a T370 dump to join TRUCKS BUILT WITH PRIDE a T680 76-inch sleeper, T880 dump, and W900L in KenIN CANADA W h i l e K e n w o r t h ’ s worth’s ExpoCam booth. medium and heav y dut y “We hold customer events at trucks will be on display the factory and showcase the inside the Place Bonaven- amount of care and quality ture, its medium duty line built into every Kenworth will also be travelling the medium duty conventional. streets of Montreal, a short A quality-designed and built drive from where they were truck is our competitive adproduced. vantage, and a factory tour “Kenworth medium duty reinforces that message.” trucks are locally built with a According to Chakib Toulot of pride at PACCAR’s Ste. bal-Seghir, PACCAR Ste. The Volvo VNR with Volvo’s I-Shift automated manual transmission allows for spec’ing of automated functions, such as Adaptive Loading, which senses when a truck is empty and lifts an axle to increase efficiency, and Adaptive Gearing, which locks out overdrive when the truck is fully loaded and makes it available on an empty return, reducing fuel consumption. Therese Plant Manager, at the factory since 1999, more than 167,000 medium and innovations and quality duty trucks have been built improvements continue to be made. “We never stop advancing our processes,” he said. “We have a dedicated workforce, augmented with the precision of robotics. A-4080 Belgreen Drive, Ottawa, ON K1G 3N2 Last year, we had more than 1,110 visitors and customers Office: 613-859-7403 | www.selix.ca visit our factory.” 1-888-990-0905 Contact: J.P. AUBE (514) 444-5687 NOW OFFERED WITH FULL RADIO REMOTE YOUR NEW CANADIAN DEALER! INTERNATIONAL TRUCK LAUNCHES RH SERIES I n t e r n a t i o n a l Tr u c k launched the International RH Series, its new Class 8 reg iona l hau l t rac tor powered by the new Internat iona l A 26 12 .4-l it re engine. The RH Series was designed to provide a visible difference in safet y and productivity for the driver. Drivers will benefit from the redesigned side windows and mirrors, which provide enhanced side visibility. The interior was conceived from a study of interaction points between the driver and truck, everything from what a driver sees to how he moves and reacts in virtually any situation. The R H Series was engineered to offer manoeuvrability that enables drivers to navigate through tight city streets or cramped loading docks. The RH Series provides an inside wheel cut of up to 50 degrees. The RH Series is powered by the new International A26 engine, a 12.4-litre engine designed to provide industry-leading uptime to the Class 8 market. Built from the proven MAN D26 engine crankcase, the A26 produces up to 338 kW (450 hp) and 1,750 ft-lb of torque. The RH Series w ill be offered in multiple configurations, including day cab, 56-inch low roof sleeper, 56inch hi-rise sleeper, day cab with roof fairing, and 56inch hi-rise sleeper with roof fairing. From a safety standpoint, the Bendix Wingman Advanced Collision Mitigation system comes standard in the RH Series. VOLVO VNR DEFINES THE SHAPE OF TRUCKS TO COME Volvo Trucks North America unveiled at the show the new Volvo VNR model, a Since 1983 Central Diesel Service has specialized in DEUTZ. In fact, we’re proud to say “Nobody knows Deutz products better,” and we can prove it! Central to Everything DEUTZ in Ontario Sudbury Ottawa NEW for Pole Line Contractors Niagara Windsor PARTS / ENGINES/ SERVICE Engines New and Refurbished CENTRAL DIESEL SERVICE Solid Service Since 1983 6604 Davand Dr., Mississauga, Ontario L5T 2M3 Email: [email protected] 905-564-9444 Fax: 905-564-9313 @EQUIPJOURNAL versatile regional haul tractor designed and developed for the modern professional truck driver and the rapidly evolving demands of goods delivery. The new Volvo VNR is ideal for urban areas, pickup and delivery, liquid tankers, dry bulk, flatbed, and other regional haul applications. With a 113-inch bumper-to-back-of-cab (BBC) length and improved sightlines over the hood, the new Volvo VNR was designed for increased manoeuvrability and versatility in tight spaces and urban traffic to complement its 50-degree wheel cut. Details like stamped steel bumpers that protect the lights and grille make it clear that the VNR is truly a work truck. “The VNR model is a work truck, but it’s a dynamic, premium work truck, and aerodynamics are greatly important within the regional haul segment,” said Wade Long, Director of Product Marketing for Volvo Trucks North America. “Regional routes often mean travelling at highway speeds, where aerodynamics becomes increasingly important. With the new VNR model, customers will see an overall fuel efficiency gain of up to 3.5% compared with our previous regional haul model.” The VNR is also tailored to a d r iver’s con nected MAY 29, 2017 l i fest yle, i ncor porat i ng an infotainment system equipped with Apple CarPlay, of fer i ng h ig h-end audio with WiFi, Bluetooth, navigation, apps and an exterior camera. Drivers will also benef it from a new i nst r u ment cluster a nd large, colour driver information display in the dash, which works with steering wheel-mounted controls to provide key operating parameters and access to trip information, performance data, and a wide-range of vehicle diagnostics. Volvo’s I-Shift automated manual transmission allows for spec’ing of automated functions, such as Adaptive Loading, which senses when a truck is empty and lifts an axle to increase efficiency, a nd Adapt ive G ea r i ng , which locks out overdrive when the truck is fully loaded and makes it available on an empty return, reducing fuel consumption. The new Volvo V NR is equipped with Volvo’s factory-installed telematics hardware, providing connect iv it y for pred ict ive diagnostics and monitoring of critical engine, transmission, and aftertreatment t rouble c ode s t h roug h Volvo’s Remote Diagnostics. A5 Call Today! 1-800-268-0182 45 Years of “On The Job” Experience. MACK TRUCKS SHOWCASES PINNACLE, GRANITE MODELS Mack Trucks spotlighted its versatile Mack Pinnacle and Granite models. Built to withstand heavy loads, steep grades, and long hauls, the Pinnacle model features Alden Equipment provides the very best Rental Equipment for your job. Continued - A7 ductive. o r P . t s a F perate! Easy To O 5 Minutes Later! [email protected] The Kenworth T370 Dump is built at PACCAR Ste. Therese Factory and was on display in the Kenworth booth at ExpoCam 2017. Reconditioning Manager Matt Cassie • [email protected] Cell: 519-239-7658 2013 John Deere 310Sk Loader Backhoe “Certified” 2014 John Deere 310SK Loader Backhoe $85,000 “Certified” $85,000 2011 John Deere 624K 4WD Loader 2014 John Deere 700K XLT 2014 John Deere 850K LGP 2015 John Deere 130GLC Dozer Dozer Excavator “Certified” $155,000 $235,000 “Certified” 30 Nortrax Canada Locations to Serve You. WE STAND READY. 2014 John Deere 650K XLT Dozer $195,000 “Certified” $165,000 2014 John Deere 210GLC Excavator $195,000 “Certified” $199,000 A6 MAY 29, 2017 @EQUIPJOURNAL SALES, RENTALS & RENTAL PURCHASE LONDON, ONTARIO, CANADA Call John or Mark at: 1-800-265-5747 or 519-686-1123 Email: [email protected] Rosaire in Timmins at: 705-268-3311 RENTAL PURCHASE AND FINANCE OPTIONS AVAILABLE ASK ABOUT OUR WARRANTY CONTACT MARK or JOHN: 1-800-265-5747 or 519-686-1123 $239,000 $210,000 CAT D6T LGP (2010) KOMATSU D65WX-17 (2014) $295,000 CAT D8T (2008) $305,000 EA. JOHN DEERE 844K II (2012) 4694 Hours, New U/C at 3597 Hours, Rebuilt Transmission, AC, Block Heater, Diff Steer, S Blade w/Tilt, 36” Pads, Drawbar, Accugrade Ready, 1 of 3 Available 4038 Hours - AC, 6-Way PAT Blade, 30” Pads, MS Ripper, Rear View Camera, Lock Up Torque Converter, Never in Rock 9400 Hours - Idle Hours: 2788, New Cat U/C at 8064 Hours, AC, 28” Pads, Diff Steer, Choice of Blade, Drawbar, CAT Dealer Inspected 5144 Hours, John Deere Warranty, 7.25 CY Teflon Lined Bucket, Scale, Michelin Tires, Rear Camera, Heated Seat, Well Maintained, 2 Units Available $345,000 $489,000 $165,000 $220,000 Unit Delivered New March 2015, 3157 Hours – 1228 Idle Hours, Cat Dealer Maintained, AC, 7.5 CY Bucket, 29.5R25 Tires, Ride Control, Rear View Camera, Cold Weather Arrangement 4155 Hours - Idle Hours: 2030, AC, NEW 20.5R25 Radial Tires, Quick Coupler, 3.75 CY GP Bkt w/BOE, Third Valve, Ride Control, 60” Cat Forks, CAT Dealer Inspected CAT 980K (2012) - FORESTRY SPEC 8203 Hours - Idle Hours: 3059 - Load Factor: 19%, AC, 3rd Valve, Rear View Camera, Choice of Bucket, 29.5x25 Michelin Tires, Cold Weather Arrangement $369,000 CAT 725C (2014) CAT 980M (2014) from $388,000 VOLVO A40G (2014) 3100 Hours – 2030 Idle Hours, CAT Dealer Maintained, AC, 26 Ton, 6x6, Diff Lock, Tailgate, Rear View Camera, Cat Dealer Inspected 5154 – 5908 Hours, 43 Ton, AC, Diff Lock, 29.5R25 Tires, Autolube, Rear View Camera, Power and Heated Mirrors, Box Heater, Tailgate, Choice of 2 $245,000 $165,000 EA. KOMATSU PC490LC-10 (2012) 5728 Hours, AC, 71” Bucket, 11’2” Stick, 35.5” Pads, Pattern Changer, Rear View Camera, Dual Work Mode, Excellent Work Ready Excavator CAT IT38H (2012) VOLVO A30D (2005) 10,453 Hours - 44% Idle Time, 31 Ton, 6x6, Engine Block Heater, AC, 23.5x25 Tires, Good Straight Trucks, Choice of 2 JOHN DEERE 750K LGP (2014) John Deere Powertrain Warranty – 3628 Hours, NEW Undercarriage, AC, 33.5” Pads, 6-Way PAT Blade, Wired for Grade Control $CALL CAT 773F (2009) 8868 Hours, 61 Ton, Traction Control, Payload Monitoring, AC, Engine Pre-Lube, 24.00R35 Tires, Backup Camera, Heated Box, Quick Evac, Extremely Well Maintained $126,000 JOHN DEERE 700J XLT (2009) 5690 Hours, Strong Undercarriage, AC, 22” Pads, Top Con Hardware, 6-Way PAT Blade, Drawbar $CALL CAT 816F II (2008) 7532 Hours, Ex-Municipal Unit, Block Heater, AC, Cat Plus Wheels, Striker Bars, Cat Blade, Will Be Reconditioned, Sold with Warranty $325,000 KOMATSU WA500-7 (2013) 5992 Hours, NEW Engine 860 Hours Ago Under Warranty, GP Bucket, Michelin Tires, Good Clean Loader VIEW our Complete Inventory at: www.marcelequipment.com @EQUIPJOURNAL MAY 29, 2017 Several New Trucks Announced at ExpoCam A7 FOR SALE Continued From - A5 Mack’s premium Rawhide Edition interior and exterior package with stainless steel and leather styling. All Pinnacle models at ExpoCam feature Mack’s newest GHG 2017 engines designed with high horsepower and torque for better fuel efficiency, power, and performance. Visitors to the Mack Trucks booth could see Jack Mack, a custom-built, one-of-a-kind mega-crew cab named after John “Jack” M. Mack, one of the founders of Mack Trucks. Mack also highlighted its extensive uptime solutions, including an update on its Mack Certified Uptime Centers and the fully integrated GuardDog Connect telematics platform. Standard on all Mack models with Mack engines, GuardDog Connect provides proactive monitoring of a truck and its powertrain for potential issues that could lead to unplanned downtime. Work i ng w it h Mack ’s OneCa l l upt i me agent s and Mack ASIST, GuardDog Con nect enables real-time diagnosis of issues, scheduling of repairs and confirmation that needed parts are in stock and ready to install—all while a truck is still on the road. 2007 Komatsu D85EX-15E, s/n 11294, 2009 Case SV212 Padfoot, s/n 3000 hours, straight blade, double tilt, rip- DDD003022, shell, A/C, 1692.5 hours, very per 3 shank, A/C, very clean, non smoker. clean, non smoking. Excellent condition. $320,000 CAD or Best Offer $85,000 CAD or Best Offer The Mack Pinnacle introduced at the show is built to withstand heavy loads, steep grades, and long hauls; it features Mack’s premium Rawhide Edition interior and exterior package. Buckets are off Cat 235D, Extreme 2009 Volvo Grader G970, s/n VCEOG910A00042875, 5 shank ripper w/3 shanks, Service Digging Buckets 42” & 72” 100% A/C, out of frame rebuilt eng. only 5 hrs. Frame rebuilt. $6,250 each hrs.: 6250 $135,000 CAD or Best Offer Esco Breaker Pin 4,000 lb class, 5” original pin, very little use. $15,000 CAD or Best Offer 2007 Komatsu PC300LC-7, s/n SNA88764 60 ft Pierce long reach and 12.5 ft. stick, aug. hyd., A/C 3630 hrs. $205,000 CAD or Best Offer The new International A26 reflects extensive driver input, delivers enhancements in uptime, visibility, and fuel economy. The lightweight class 8 regional haul tractor is well-suited for the beverage, bulk haul, and other regional haul applications. DISMANTLING 1997 Komatsu PC300-6 Excavator 1981 TS24 Scraper For More Infomation or Pictures, Call 306-634-9911 or Email [email protected] FOR MORE USED EQUIPMENT, VISIT used.toromontcat.com USED GENERATORS & PARTS WANTED USED GEN. SETS, INDUSTRIAL AND MARINE ENGINES Dependable Alternative Toromont Rebuilt and Used Generator Sets. If you don’t see what you want, call me and I’ll get it for you. A transformer can be used to reduce 600 to 480 volts. For pictures please visit: www.toromontpowersystems.com CAT XQ400 Sound Attenuated Gen Set 400 KW @ 208/480/600 Volt 0 hours since top end overhaul, TSSA approved fuel tank and trailer USED & RESTORED PARTS   Recent Arrivals Transmissions (all rebuilt and tested) • New surplus excavator seats c/w suspension various models. • Rebuilt 950G transmission .....$18,300 exchange • Rebuilt IT28G transmission p/n 2013318 .....................................................$13,500 exchange • Rebuilt IT28B transmission p/n 8P9853 .....................................................$15,800 exchange • IT18F transmission (1082075) .$10,500 exchange • IT28G transmission (1664467) $13,500 exchange • D6H transmission (8E2946) ........$15,500 outright • 988B Transmission p/n 3P9094 .$25,850 outright • Rebuilt 930H Ttansmission p/n 2902720 .....................................................$14,950 exchange • 924 transmission rebuilt. p/n 1807503 .....................................................$13,200 exchange • 980C rebuilt, p/n 6Y3197 heavy duty arrangement .............................$22,700 exchange • 330B Rebuilt Swing drive p/n 114 144 ..................................................$7500 exchange $145,000 • New Cat surplus 345 Swivel p/n 158 9119 ..................................................$3000 exchange • 950, 962 GP buckets, new take off’s ....................................................... $7200 and up • New CAT 420 pin on front buckets, c/w bolt on edge ................................................. $1250 ea • Numerous Fusion couplers, IT couplers all new take off’s....................................... $1800 ea CAT C9 2013 Tier 3 Gen Set 200 KW @ 600 Volt with 962 Hours TSSA approved fuel tank CALL FOR PRICING • 420IT front buckets, one like new, one used in very good shape. • 320 hyd quick coupler, 54’’ GP bucket, new Cat 60’’ ditching bucket. • Numerous Hydraulic cylinders rebuilt, Excavator and loader. Coming soon: CAT 2000 KW 600 volt skid mounted gen set CAT 300 KW 600 volt enclosed gen set Engines • Various 3412 core engines available. Call for Pricing Contact Pat McCart at Tel: 1 800-771-9145 or 705-436-7770, Cell: 416-522-8701 US PRICING SUBJECTED TO ACTUAL EXCHANGE RATES AT TIME OF SALE. ALL UNITS ARE SUBJECT TO PRIOR SALE. Email: [email protected] • 385 GP 78’’ 6.1 cu yd HB Linkage on consignment ...........................................$14,900 • Numerous new Cat surplus cutting edges and bucket teeth. Final Drives and Differentials • 740 Final Drives (2) reconditioned, p/n 3710565 ...........................................................................$24,500 ea • Complete 120 Grader tandem drive groups new .. ...........................................................................$8,800 ea • 324D Rebuilt final derives, new bearings/seals .................................................................................$10,500 If we don’t stock it we will find it for you. PLEASE CALL SHAWN, ANDY, OR JOE AT OUR BARRIE LOCATION Phone: 705-436-7770 or 1 800-771-9145 | Fax: 705-436-7820 CALL GREG AT OUR REMAN LOCATION, 416 667 5786. A8 MAY 29, 2017 @EQUIPJOURNAL A FULL LINE OF EQUIPMENT & PRODUCT SUPPORT SOLUTIONS FOR ALL YOUR ROAD BUILDING NEEDS. PAVERS | MTVS | COLD PLANERS | STABILIZERS BROOMS | COMPETITIVE PARTS | GUARDIAN roadtec.com 1.800.272.7100 423.265.0600 © 2017 ROADTEC.INC. ALL RIGHTS RESERVED Untitled-1.indd 1 5/17/17 8:55 AM @EQUIPJOURNAL MAY 29, 2017 A9 Case Dealership J.R. Brisson Gets Acquired Longus and Vivaco Groupe Coopératif announce the acquisition of the two J.R. Brisson dealerships located in Ontario, (Vars and Ottawa). This acquisition means the Longus group now operates six Case Construction dealerships, and becomes the most important dealership of the banner in Canada. It also means 15 locations for the Groupe Terapro. The goal is to maximize and consolidate services to contractors over a more vast territory while maintaining their founding values of customer proximity. J.R. Brisson will maintain its distinctive character by keeping its name. The history and the expertise behind will remain in place as the existing employees will continue to grow with the company. Employing more than 80 employees in 6 locations, Longus has operated in the domain of the construction and snow removal equipment for more than 60 years. The company is known for its expertise in the excavation and snow removal business with the Case Construction, New Holland, and Kobelco products lines. Since 2010, Longus has been part of the Groupe Terapro in partnership with Inotrac and Machinerie CH. Counting 285 employees, Terapro is a group of dealerships working in the equipment sector with its two divisions: agricultural machinery with the New Holland Agriculture dealerships and construction machinery with the Case Construction dealerships. The group operates 15 dealerships in all, 9 of which are in the agricultural sector under the Inotrac and Macherine CH banners, and six others in the construction sector under the Longus banner. Founded in 1903 at Casselman (Ontario), J.R. Brisson EXCLUSIVE ONTARIO DEALER www.pineridgeliscoedwards.com Equ ipment is a fa m i lyo w ne d b u s i ne s s . Fou r generations of Brisson’s have built this successful business in Western Quebec and East- ern Ontario. The team of 35 employees has developed strong expertise with a personalized approach. Introducing Mounted Breakers Oil-fired Design Provides High Impact Energy And Saves Diesel Fuel Economy Fixed Impact Energy Valve Adjusts Blow Rate With Hydraulic Flow To Provide Consistent Impact Energy Selectable Stroke Enables User To Adjust Blow Rate According To The Application Accumulator Protects Carrier And Maximizes Impact Energy And Blow Rate Designed For Easy Installation Of Auto-Lube System For Maintenance-Free Lubrication (Available As As Accessory On All Models Except LMB1308) Vibration Dampening Tie Rods Help Extend Tie Rod Life By Preventing Loosening User Selectable Auto Shut Off Prevents Blank Firing To Extend Breaker Life 1-866-488-0878 J.R. Brisson will maintain its distinctive character by keeping the name of the enterprise. LMB1308 LMB2015 LMB2620 LMB3025 LMB4035 LMB5545 LMB8055 MERLO IS THE MOST PRODUCTIVE • COMPACT • SAFEST • COMFORTABLE • FUEL EFFICIENT TELEHANDLER ON THE MARKET [email protected] • 1 877 641 8355 A10 MAY 29, 2017 @EQUIPJOURNAL brandtused.ca What are you looking for? Searching for used equipment just got a whole lot easier with advanced searches, currency conversion and monthly payment calculations. And every machine is backed by Brandt – the best-trained and committed after sales support team in the business. FLEXIBLE OPTIONS FINANCING CUSTOMIZED, FIND OUT MORE 1-855-711-4545 @EQUIPJOURNAL MAY 29, 2017 A11 Rotating Telehandler Beats Scaffolding in Bridge Work W hen Concord, Ontario-based Soncin Construction needed an equipment solution for some under bridge work, they turned to Manulift EMI, the exclusive importer of Merlo in Canada. By using a rotating telehandler, Soncin Construction could avoid the delays and costs of using scaffolding. The company purchased a Merlo Roto 40.26. The 40.26 has a maximum lift height of 26 metres (85 feet) and a maximum load capacity of 4,000 kg (8,800 pounds). On the Bayview and Lawrence bridge project, Soncin Construction is using the Merlo Roto 40.26 to gain access to the understructure of the bridge and remove the drainage boxes, to feed material up from the bottom and saved a significant amount of money by not installing scaffolding. The company also appreciates the versatility of their new telehandler; with it, they are able to use just one machine for multiple sections of the project. “It is so versatile; we are using it all the time for various lifting task,” says Dennis Soncin, owner, Soncin Construction. The versatility of Merlo Roto telehandlers can be f u r t her i nc rea sed w it h attachments and optional equipment, which can be intercha nged on t he fork carriage in only a few seconds. A connection box is mounted on the jib head for the selection of a variety of electrically controlled equ ipment. A sta nda rd double-acting hydraulic service with quick coup- lings is fitted on the boom for the powering of hydraulic attachments. T he Roto 40.26 is one of Merlo’s MCSS (Merlin Continuous Slew Safet y) telehandlers. When Roto MCSS teleha nd ler s a re operating on their stabilizers, the MCSS continuous stability control system constantly monitors the forces acting on the four stabilizer pads, then calculates the position of the overall centre of gravity of the machine Continued - A22 Sales • Rentals • Service BREAKERS & BOOMS Call to book your Free of Charge Boom Audit in Southern Ontario ON Mississauga • Washago • Timmins • Sudbury • Oshawa • Ottawa • Kingston QC Boisbriand • Rouyn NB Moncton NS Mt. Uniacke Soncin uses the Merlo Roto 40.26 to inspect a bridge in Ontario. LOADSTAR “Leading In Trailing” LOADSTAR TRAILERS INC. Call: 1-855-625-0941• WWW.CREIGHTONROCK.COM “Large or Small LOADSTAR-PARON Offers Them All” 6 Equal Interest Free Payments On New Trailer Purchase We Rent Trailers ... Call for Details! 75/65 QUAD ... OUR THANKS TO EAGLESON CONSTRUCTION, MILLBROOK, ON. -636725 34 TON ... OUR THANKS TO D’ORAZIO INFRASTRUCTURES, OAKVILLE, ON. -636727 905-885-0744 VISIT OUR UPDATED WEBSITE: www.loadstartrailers.com 60/60 ... OUR THANKS TO CRL CAMPBELL CONSTRUCTION & DRAINAGE LTD., WAINFLEET, ON -636728 E-MAIL: [email protected] 34 TON 2655 LAKESHORE ROAD, PORT HOPE, ON L1A 3V9 .... OUR THANKS TO CARDAN DEMOLITION, BOWMANVILLE, ON. -636729 LIKE US ON FACEBOOK MADE IN CANADA 75/65 TON ... OUR THANKS TO MFC CONSTRUCTION, BARRIE, ON. -636730 34 TON .... OUR THANKS TO WELSH CONSTRUCTION, SOUTHAMPTON, ON. “Premium Quality Engineered Products” -636731 A12 MAY 29, 2017 @EQUIPJOURNAL The Power of New Solutions The International Fluid Power Exposition (IFPE), held in conjunction with ConExpo-Con/Agg, showcases the latest innovations and expertise in the fluid power, power transmission, and motion control industries. It is at IFPE where the technologies that power heav y equipment are exhibited. For most machines, that means a diesel engine. Here are summaries of many of the engine announcements made by major OEMs (original equipment manufacturers) at the show (March 7-11 in Las Vegas, Nevada). CUMMINS POINTS TO THE FUTURE OF OFF-HIGHWAY DRIVELINES Cummins Inc. (picture on A3) announced trials of concept future drivelines for off-highway equipment. “Approaching our second century, we see alternative power as a complement to diesel. We call it energy diversity, providing a range of powertrain solutions for customers: clean diesel, renewables, natural gas, gasoline, hybrids, and electric power,” said Shelley Knust, Executive Director – Off-Highway Engineering. Cummins understands that OEM’s want more ef- ficient, clean, and capable powertrains, with an expectation to do more with less, and improved performance and transient response while reducing fuel consumption, tailpipe (including carbon dioxide) and noise emissions. P a r a l le l h y br id s , f or example, can deliver efficiency improvements for large forklift trucks. An 8to 16-ton truck using a 100 kW diesel plus a 10 kW to 25 kW motor generator is showing major fuel consumption improvements, up to 28%. Integrating the electric motor means that the driveline delivers better transient response while the engine runs at more optimum operating points. A plug-in hybrid is suitable for applications such as mobile cranes, using diesel for transport and plug-in for crane operation. That allows silent working with reduced tailpipe emissions on urban construction sites. Fuel consumption is reduced by up to 50% on the overall duty cycle. A full-electric driveline, being trialled in a delivery van, will offer a solution for a range of off-highway equipment, such as drills, underground mine trucks, and terminal tractors. Using a direct DC drive with 200 kW (267 hp) peak propulsion/regen, it has a 62 kWh NMC lithium ion battery Deutz on display at IFPE. Deutz’s new engines are the product of a collabpack with a four-hour charge orative partnership with Liebherr and are well-suited to excavators and time. wheel loaders, explains Deutz. DEUTZ’S EXPANDED ENGINE PORTFOLIO IS FUTURE DRIVEN Deutz presented its expanded engine portfolio with cubic capacities now ranging from 2.2 to 18.0 litres. In the spirit of the sloga n, “Fut u re Dr iven – engine technology for tomorrow,” Deutz unveiled its new four-cylinder TCD 5.0 and TCD 9.0 diesel engines and six-cylinder TCD 12.0, TCD 13.5, and TCD 18.0 en- gines (not at the show) to the American market. The Deutz TCD 5.0 will be introduced worldwide in 2019 to meet the next EU Stage V emissions standard. The engine will also comply with US Tier 4 Final. This compact, t u rbocha rged a nd cha rge-a i r-cooled, five-cubic-litre diesel engine generates 100-150 kW (135-200 hp) and 660 ft-lbs of torque. The engine produces more power from a small- er cubic capacity, enabling customers to replace larger displacement engines with more fuel-efficient and compact four-cylinder engines. The TCD 5.0 is a brand-new de s i g n w it h m i n i mu m pipework and fewer components for less complexity and maintenance. The new 9.0-cubic-litre is well-suited to excavators and wheel loaders, says Deutz. Together, with the TCD 12.0 and 13.5, these engines will follow a standardized family design with common cus- @EQUIPJOURNAL MAY 29, 2017 tomer interfaces and high component commonality. In the future, the Deutz TCD 18.0 will mark the upper end of the power scale. Its engine, designed much like a six-cylinder in-line engine, boasts up to 830 hp (620 kW) and 2,655 fl-lbs of torque. All four engines (TCD 9.0 to 18.0) are the product of a collaborative partnership with the Liebherr Group. Deut z pla n s to m a rket these Liebherr-manufactured engines under its own brand name and make them available in 2019 via the worldwide Deutz dealership and service network. FPT PRESENTS NEW POWERFUL ENGINE FOR DIVERSE APPLICATIONS FPT Industrial launched its new 20-litre engine—the FPT V20. The FPT V20 has been specifically developed to match all the require- ments coming from different application fields. Thus, it is suitable for both stationary and mobile applications, such as construction, power generation, military, agriculture, and tailways. The V20 is best-in-class for power-to-weight ratio (13% more than 12 cylinders competitors’ average), claims the company, delivering high performance while preserving vehicle stabilit y and reducing load on axles. The V20 is also the most compact engine of its category, minimizing impact on vehicle dimensions and load capacity. The V20 features top efficiency benefits: it permits up to 2% of savings on fuel compared to 12-cylinder engines averages thanks to lower friction and smaller displacement. Furthermore, the V20’s cross-banks exhaust system design releases optimal turbochargers flu- A13 John Deere’s Integrated Emissions Control system configuration will be available in two sizes for the 13.6-litre engine and is designed to be mounted either veritcally or horizontally. The FPT 12-cylinder V20 has been specifically developed to match all the power requirements coming from different applicaiton fields, and is therefore suitable for both mobile and stationary applications. id-dynamics for maximum efficiency. Developed to be as productive as possible, the V20 adopts a one side serviceability layout: oil, fuel, and blow by filters are placed on the front side allowing an easy access position from the vehicle hood; all filters are remote-mountable on request to fit multiple applications layouts. At the same time, the single cylinder heads are designed and made in high-resistance nodular cast iron to guarantee higher performance with 220 bar PCP and easier system is designed to offer maintenance operations. greater packaging and integration flexibility to both JOHN DEERE’S INTEGRATED internal John  Deere and EMISSIONS CONTROL SYSTEM OEM customer applications. “As we review the specifCONFIGURATION IMPROVES APPLICATION INTEGRATION ic application needs of John Deere Power Sys- our internal partners and tems debuted its newest OEM customers alike, we Integrated Emissions Con- continuously look for strattrol system configuration. egies that help improve Configured with an inline aftertreatment device, the Continued - A16 WITH A FULL LINE OF MODELS, THERE’S A JOHN DEERE EXCAVATOR FOR YOUR KIND OF WORK. Regardless of the jobsite, our excavators get the job done with muscle, control and peerless productivity. Efficient, cool-running engines and enhanced hydraulics make these the most-reliable and hardest-working John Deere excavators yet. Climb into one of these best-in-class cabs and unleash a mighty workhorse to tackle your toughest jobs. 0% APR FOR 48 MONTHS * GreenTractors.ca HutchinsonFarmSupply.com HuronTractor.com PremierEquipment.ca GreenTech.ca For more information, stop by your nearest Ontario John Deere dealer or visit online. *Offer valid at participating dealers. Offer valid from 01 March 2017 until 30 June 2017 and is subject to John Deere Financial approval. For commercial use only. Down payment may be required. Taxes, set-up, delivery, freight, insurance and preparation charges, documentation fees and additional dealer fees may apply. Minimum finance amount is required. Some restrictions apply, see dealer for complete details and other financing options. Limited time offer which may not be combined with other offers. A14 MAY 29, 2017 @EQUIPJOURNAL Volvo Used Equipment For more information contact: J.J Lyons [email protected] Mississauga Ontario 1.800.268.7004 1.905.565.3857 2011 Volvo A40F, body heat, AC, suspension seat 3,200 hours. $360,000 2011 Volvo A35F, 3900 hours, tailgate, heated box, warranty. $366,000 2012 Volvo EC300D L, 445 hours, 2 bkts, Q/C, heat, A/C, 28” Tracks, camera, aux. hyd. $227,000 2005 Volvo EC210C, 32” track pad, hyd. coupler, AC, Aux Hydr., 42” bucket. $55,900 2014 Volvo EC380E, 3800 hrs, 36” pads, coupler, thumb , 54” & 66” bkts. $210,000 2014 Volvo EC380EL, 3800 hours, hyd. coupler, 36” pads, 54” & 66” bkts. $255,000 2009 Volvo ECR305, hyd. coupler, auto lube, 36” dig bucket, aux hyd., 7500 hrs. $89,000 2005 Volvo L330E, boom susp., auto lube, 9.1 yard spade nose bucket. $69,000 2014 Volvo L70G, 1,665 hours, boom susp., Q/C, Michelin XHA, 3 yd bucket. $156,000 2012 Volvo L70G, 2180 hours, coupler, boom suspension 3.5 yd bucket. $135,000 2012 Volvo L50, 1900 hours, boom susp., 88” 2.1yd. bucket w/ BOCE, loaded. $105,900 2013 Volvo L70G, 3855 hours, coupler , 3rd fn hyd., boom susp., 3 yd bucket. $140,000 2012 Volvo L50D, 2 yard bucket, nice clean wheel loader. $34,900 2014 Volvo L90G, 775 hrs, 3rd fn hyd., single lever cntrl, boom susp, coupler, forks. $175,000 2013 Volvo SD115, smooth drum roller, 490 hours. $86,000 2013 Volvo L90G, 7300 hrs, 3.5 yd bkt, Q/C, 3rd Function hydraulics, auto lube $139,000 2013 Volvo L70G, coupler, bucket, forks, 3rd function hydraulics $142,500 2014 Volvo P7110, Omni screed, 18 ft auger, smooth tracks, flood lights. $525,000 ALBERTA Acheson 877.948.3515 Calgary 800.342.6523 Fort McMurray 855.799.4201 Grande Prairie 888.513.9919 Red Deer 866.950.3473 ATLANTIC Dartmouth 800.565.1916 Moncton 800.332.3338 Mount Pearl 888.542.2202 ONTARIO Grimsby 800.668.9575 Kitchener 800.265.2488 London (Lambeth) 800.265.4762 Mississauga 800.268.7004 Ottawa 800.822.3308 Sudbury (Lively) 800.267.9833 Thunder Bay 800.465.5080 QUÉBEC Baie-Comeau 866.996.3091 Boucherville 877.674.8380 Chicoutimi 800.323.1724 Laval 800.363.6789 St-Augustin 800.463.2662 Trois-Rivières 855.840.0828 Val-d’Or 800.561.4192 www.strongco.com @EQUIPJOURNAL MAY 29, 2017 A15 The Force Is Strong with Cooper Equipment Cooper Equipment hosted on May the 4th a successful open house at the company’s Kitchener, Ontario location. It appears as though the force was with the company, because 250 people attended the open house. The event included free food, promotions, and prizes. Prizes included a chainsaw, weeder, chordless blower, Darryl Cooper, Doug Dougherty, and Pete Rongits stand with two customers chordless grease gun, model at the company’s open house in Kitchener, Ontario. replicas, bar stools, and clothing. “We had a great turn out even though it rained the whole time,” says Zoltan Nyusa, Kitchener Branch Manager. “I would like to thank the guys for the extra time and effort that they put in to make this event happen, for cleaning the place, and for welcoming all the visitors.” With more than 20 locations in Ontario, Quebec, and Alberta, Cooper Equipment Rentals Ltd. is a Jedi in full-service construction equipment rental. The company specializes in the rental of compact, aerial, and heavy construction equipment while providing a wide range of supplies, as well as service and support. TRI-CITY EQUIPMENT Industry leader in on-site equipment and earthworks solutions. Your Heavy Equipment Rental Headquarters CHOICE OF BUCKETS VOLVO EC240CLR, 60 foot reach, tooth or smooth edge buckets available. CHOICE OF BUCKETS OR ATTACHMENTS 2013 CAT 336EL, aux. hyd., hammer avail. 2015 HITACHI ZX470, coupler, med.stick. HITACHI 245US LC, Q/C pattern changer. NOW OFFERING 8 TON CLASS 2017 KUBOTA KX080-4, fully equipped w/ 2014 CAT 318D WHEELED EXCAVATOR, hyd. thumbs, wrist-a-twist, choice of bkts. var. angle boom, aux. hyd. 72”wrist a twist. 2013-2014 CAT 930K, Q/C, 3rd valve, bucket, forks, fully equipped. 2014 CAT 950K, Q/C, sewer forks or bucket, 23.5 radials. 35 & 40 TON TRUCKS ALSO IN STOCK pped! ui Fully Eq 2015 VOLVO A30G’s tailgates and flotation tires. 2015 CAT D6T LGP, VPAT, ARO ready, with winch or ripper. Tri-City Equipment is a 100% privately owned Canadian corporation. 2015 VOLVO 25G’S, Tailgates and 23.5 tires. CONTACTS: Jeff Armishaw: (519) 240-2115 Main Phone: (519) 767-9628 Fax: (519) 837-1161 Don Tindall: (519) 827-4294 TOLL FREE: 1-800-646-2064 VISIT US: 91 Monarch Road, Guelph ON, N1K 1S4 EMAIL US: [email protected] www.tri-cityequipment.com A16 MAY 29, 2017 @EQUIPJOURNAL The Power of New Solutions Continued From - A13 application integration,” said John Piasecki, Director of Marketing, Sales and Customer Support for John Deere Power Systems. “Our ability to tailor the configuration of our Integrated Emissions Control system allows us to accommodate increasingly complex packaging requirements while meeting the expanding complexity in world emissions standards.” T he ne w Joh n  D e e r e Integrated Emissions Control system uses an inline aftertreatment device that contains a diesel particulate filter (DPF), diesel oxidation catalyst (DOC), and selective catalytic reduction (SCR) system, achieving Tier  4 Final and Stage V emission levels. John Deere initially plans to offer the system in two sizes for the new 13.6litre engine, and is designed to be mounted either horizontally or vertically.  Joh n  Deere desig ned its inline aftertreatment device with an enhanced diesel exhaust fluid (DEF) management system efficiency and performance. In addition, enhanced interface points ease application integration and reduce leak paths, connection points and heat loss, providing including a diesel particumore robust aftertreatment late filter (DPF) and Selective performance. Catalytic Reduction (SCR). This four-cylinder engine KUBOTA UNVEILED THE offers outputs only availCOMPANY’S MOST POWER- able prev iously w ith si x cylinders. It also features FUL ENGINE TO DATE Kubot a E ng i ne Cor p. the world’s top class fuel has entered a new level of efficiency and output perofferings for its end-users formance in the five-litre with the introduction of class, claims the company. the company’s first 200+ hp To achieve this high outmodel—the five-litre V5009, put combined with low fuel which is Kubota’s first model consu mpt ion, Kubota’s in its new 09 Series. Begin- team secured the air intake ning in 2020, and consistent amount through high-preswith impending EU Stage V sure supercharging, then emission regulations, the used combustion matching Kubota’s first 150+ kW (200 + hp) engine features the world’s top class fuel compact V5009 has an out- to create high in-cylinder efficiency and output performance in the five-litre class, claims the company. put of 157.3 kW (210.9 hp) pressure. They also designed and after treatment devices a ladder frame structure to Canada’s Grader People jadeequipment.com Dealer in Alberta & Ontario [email protected] Visit us at Booth 104 (Arena ) June 7-8th, Milverton, ON Check Out These Used Graders For Sale! 00. $12ab2le,T6axes Extra Applic illia, ON FOB Or In any season, peak perfomance is important for your machines. With the passing of winter ,many of our customers in the northern hemisphere, are grading roads, applying dust suppression, and construction season is kicking into high gear. In the southern hemisphere, customers are grading roads, preparing for winter, and finishing last minute construction projects. There is a constant need for machines to be running at peak performance, no matter where you are in this constantly changing cycle of seasons. Jade Equipment, your source for new, used, and rebuilt parts, is ready to meet your needs. Our parts team is ready to offer their expertise in parts solutions, to keep your machines running. Our fully stocked locations in Edmonton, Alberta and Orillia, Ontario offer same day shipping on most of your parts requirements for Champion and Volvo Motor Graders, Volvo Loaders and other lines of construction equipment. 2008 Volvo G930 - 8162 Hours Volvo D7 (155-195 HP) diesel engine, Volvo HTE1160 transmission, 14’ moldboard, float valves, 1400x24 tires (New Bridgestone VKT), Low Profile cab, Air conditioning, slope meter, additional lighting. Machine rebuilt, freshly painted and job ready. Attachments available. $128, 900. Applic able T axe FOB E dmon s Extra ton, A B Jade Equipment Company Ltd., is proud to be the authorized deal for the Easi-Pour product line in Alberta and Ontario. Easi-Pour has been the leader in production, speed, and quality in the curb and gutter paving industry since 1967. The Easi-Pour was designed and built with ease of operation and efficiency in mind. The Easi-our has been strategically designed to give you decades of dependable and safe service. From very nicely equipped base models to our extensive list of optional equipment you will find an Easi-our to fit your needs. Call your closest branch for details. 2008 John Deere 872D - 9095 Hours John Deere 6081H (205-235HP) diesel engine, direct drive powershift transmission, cab c/w air conditioning, 14’ moldboard, 17.5x25 tires, positive air shutoff, pro heat, three bank axillary hydraulics with float circuit. Ripper and push block available at extra cost. 10807 - 209 Street, Edmonton, AB T5S 1Z7 Toll Free: 1-800-663-0715 • Tel: 780-452-7021 • Fax: 780-453-1477 47 Forest Plain Road, Oro-Medonte, ON L3V 0R4 Toll Free: 1-866-404-5233 • Tel: 705-325-2777 • Fax: 705-325-9777 www.jadeequipment.com [email protected] The new MAN D32862 LE13x provides sufficient charging pressure and dynamics even at low revsfor heavy-duty construction machinery, such as wheel loaders, excavators, and mobile cranes. ensure engine durability, improved the water cooling channel, and added a side power take off option and three ports for accessories such as hydraulic pumps for ease of use. “ T he V 5 0 0 9 w i l l not require any major modifications to our customers’ current machines because it is compact enough for easy installation,” said Kevin Keyes, Vice President of Sales and Marketing for Kubota Engine America. “It should also significantly reduce running and operating costs, saving time, money, and energy for our end-users.” MAN ENGINES FEATURE THE LATEST ENGINE TECHNOLOGY With the twelve-cylinder D2862 LE13x and the two six-cylinder D3876 LE12x and D2676 LE13x engines, MAN Engines is offering three diesel engines based on the most up-to-date engine technology. The D2862 LE13x has a power output range from 588 to 816 kW (800 to 1,110 hp). Waste gate charging allows for a maximum torque of 2,730 to 3,590 ft-lbs at low speeds (at 1,300-1,400 rpm). The omission of exhaust gas recirculation results in lower heat dissipation from the engine, which means that a correspondingly smaller radiator can be used. Due to its additional modular exhaust gas aftertreatment system with variable set-up options for the individual components, the engine can be used in a wide range of applications in construction machinery, and it meets the Tier 4 final and EU Stage V emissions standards without exhaust gas recirculation, purely via selective catalytic reduction. Continued - A18 AUTHORIZED DISTRIBUTOR CONSTRUCTION EQUIPMENT RENTAL DOZERS - LOADERS - BACKHOES - ROLLERS CUSTOMER SERVICE TARTEN EQUIPMENT LIMITED 6199 Shawson Drive Mississauga, ON L5T 1E5 Phone: 905 670 1704 Fax: 905 670 4790 Toll Free: 1 888 670 1704 WWW.TARTEN.COM COMMITTED TO SERVICE EXCELLENCE SINCE 1976 @EQUIPJOURNAL MAY 29, 2017 A17 The Future of Skilled Trades & Technologies in Ontario The Skills Ontario Competition, May 1-3 at the Toronto Congress Centre, saw more than 2,300 elementary, secondary, and post-secondary students converge on the GTA to showcase and test their skills in 68 unique skilled trade and technology contests. The Skills Ontario Competition is the largest skilled trade and technology competition in Canada. A broad range of skills and careers were represented f rom across t he ma nufacturing, transportation, construction, service, and technology sectors, as students competed for medals, monetary awards, and job offers in select contest areas, offered by partnered organizations. Gold medalists in select contests are also eligible to represent Team Ontario at the Skills Canada National Competition, May 31 to June 4 in Winnipeg. Young Women’s Conferences and a First Nations, Métis, and Inuit Student Conference were hosted by Skills Ontario in conjunction with the Skills Ontario Competition. Competitors at the secondary and post-secondary levels were judged on their skills in completing their contest project, as well as their job interview skills and related soft skills. Elementary students from across the province participated in a range of workshops and challenges designed to introduce them to career opportunities and relevant skills in the skilled trades and technologies. This Volvo A35G truck, provided by Strongco Equipment, is just one of several heavy equipment at Skills Ontario. At the show, people were tested on their ability to diagnose service issues. Also on site were two Caterpillar dozers provided by Toromont and two John Deere 310 backhoes provided by Nortrax. A broad range of skills and careers were represented from across the manufacturing, transportation, construction, service, and technology sectors, as students competed for gold, silver, and bronze medals. Above, two contestants test their strength. GENUINE PARTS More than 2,300 students, spectators, and other guests from all over the province visited this year’s Skills Ontario Competition. KEEP YOU UP AND RUNNING, 24/7 • 650,000 sq/ft Main distribution centre offering 24/7/365 service • 9 Regional parts distribution centres, including Mississauga, Ont. • New and remanufactured parts available • Order parts electronically • 200,000 stocking parts The Team Carpentry Contest has the largest representation of competitors, with 52 school boards from across Ontario represented. FOR SALE 2005 CAT D6N Dozer. 6 Way Blade. AC. 13,300 hours ............ $69,000 2006 CAT 924G Wheel Loader. IT Quick Coupler. Auxiliary hydraulics. Ride Control. 20.5R25 tires. 6,700 hours .............................. $69,000 I am Komatsu 2011 FORD F550 Service Truck. 6.7 L Diesel. Automatic. 165,000 km. Power Windows. 11’ body ..... $37,500 ABE RIDDLE / DIRECTOR of PARTS OPERATIONS / RIPLEY, TN “When you need a part, any part, you need it now - and you need it right, I understand that. Our modern 650,000 sq/ft facility centrally located in the U.S.A. is open 24/7 and ships Same Day if needed. That’s why I’m proud to be a part of the Komatsu team. My Team! We will do whatever it takes to keep you up and running. And that’s why I AM KOMATSU” 1986 P & H Omega 40 Ton Rough Terrain Crane. 4x4. Auxiliary winch. 82’ 4 section boom. 45’ offset jib. 6,100 hours. 26.5R25 tires. Anti Two-Block ...................... $39,000 Unused 55’ Long Reach Boom Assemblies: for CAT 320; Volvo 210; Deere 200 ............. $19,800. Also available 60’ Long Reach Boom Assembly for CAT 330. N. Johnson Ltd. Office: 709-686-5558 Cell: 709-632-1183 www.njohnsonequipment.com Toronto : 800.268.0679 Ottawa : 800.463.7011 www.essltd.com London : 800.959.5516 @ess1946 Sudbury : 800.334.5154 @essltdcanada A18 MAY 29, 2017 @EQUIPJOURNAL The Power of New Solutions HIGH REACH INC 45 Shepherd Road, Oakville, Ontario L6K 2G6 www.highreachinc.com Broderson IC-80 • 4 wheel Drive • 4 Wheel Steer • Cummins Diesel • Rated Capacity Limiter • Block & Ball RENTALSSALESSERVICE In Stock Now Available for Immediate Delivery Continued From - A16 The compact and light design of the MAN D3876 engine makes it an extremely flexible unit, claims the manufacturer. The MAN D3876 LE12x covers power output levels of 415, 450, and 485 kW (565, 612, and 660 hp). The variable turbine geometr y (V TG) ensures a broad torque and power output plateau from 1,050 to 1,450 rpm, with a maximum torque from 1,990 to 2,110 ft-lbs. This provides sufficient charging pressure and dynamics even at low revs (greater efficiency) for heav y-duty construction machinery such as wheel loaders, excavators, and mobile cranes. MTU engines were on display at the MTU booth at IFPE and in machines on display at other booths at the show, such as this JCB excavator. The MAN D2676 LE13x features a power output range from 294-404 kW (400-550 hp) at 1,950 rpm. It generates a maximum torque of 1,385 to 1,770 ft-lbs from a QUALITY ATTACHMENTS www.shawbros.ca [email protected] Tel: (905) 844-4164 Barrie, ON 1-877-625-9677 ROLLS-ROYCE PRESENTS MTU ENGINES FOR ALL TIERS/STAGES  Fax: (905) 844-2135 “Live as if you were to die tomorrow. Learn as if you were to live forever.” ~Mahatma Gandhi Your Authorized Dealer for: Best Quality Attachments At The Lowest Possible Price! Atlantic Powertrain & Equipment Inc. Contact Your Alberta, B.C., Ontario, Quebec and Newfoundland Link-Belt Excavator Dealer Today! The Inland Group Penticton, BC 250-492-3939 Burnaby, BC 604-291-6021 Cranbrook, BC 250-426-6205 Prince George, BC 250-562-8171 Quesnel, BC 250-992-7256 Fort St. John, BC 250-785-6105 Terrace, BC 250-635-5122 Kamloops, BC 250-374-4406 Kelowna, BC 250-769-2933 Williams Lake, BC 250-392-7101 Vernon, BC 250-545-4424 Langley, BC 604-607-8555 www.inland-group.com Itec 2000 Equipment & Hydraulics Rosslyn, ON Thunder Bay, ON 888-574-8530 www.itec2000.com 12.4-litre displacement. It complies with EU Stage IV and EPA Tier 4 final emissions standards without the addition of a diesel oxidation catalyst or diesel particle f ilter. Fur t hermore, t he compact engine dimensions offer engineers flexibility in developing the perfect design for the driveline of the vehicle. Additional space is generated via the use of an SCR injection system, which does not require compressed air. McDowell B Equipment Ltd. Sudbury, ON 705-566-8190 416-770-7706 www.bmcdowell.com Mount Pearl, NL 709-747-2002 www.atlanticpowertrain.com Micanic St-Aug-D-Desm, QC 418-878-2241 www.micanic.com Conaker Equipment Ltd. Calgary, AB 888-840-9897 www.conaker.com Stratton Equipment Sales and Service Rolls-Royce presented a full range of MTU diesel engines designed for construction, industrial, and agricultural applications; Equipment Sales & Service Limited Edmonton, AB 780-440-4010 www.essltd.com Top Lift Enterprises Inc. Box 35 Stratton, ON P3B 4J8 807-483-7777 Stoney Creek, ON 905-662-4137 Bolton, ON 905-857-5200 St-Laurent, QC 514-335-2953 Sherbrooke, QC 819-612-5438 www.strattonequipment.com www.toplift.com @EQUIPJOURNAL MAY 29, 2017 their booth featured engines of varied emissions levels to serve customers around the world, whether they need Tier 2 or EU Stage V or anything in between. The MTU brand is part of Rolls-Royce Power Systems. Andrew Suda, Sr. Manager, Industrial Sales, said: “MTU engines are known for their exceptional service life, reliability and fuel efficiency. They have been engineered for a wide range of emissions regulations and are built to thrive in the extreme conditions and highly diverse applications that we serve. With our extensive service network and our heritage w it h Det roit Diesel and Mercedes-Benz, we have the complete package that OEMs and end-users want.” The MTU booth featured a range of engines spanning the 75–3,000 kW (100-4,000 hp) power range. These engines are specially developed for off-highway applications in the construc- tion, industrial, mining and agricultural sectors. MTU also showcaswed its EU Stage V SCR aftertreatment solution for the MTU Series 1000, 1100, 1300, and 1500 engines, MTU’s reman offerings, and its heritage brand product—the Detroit Diesel 2-Cycle. The MTU ValueCare section of the booth features information on MTU’s sales and service locator app as well as MTU’s consumables and genuine parts. EXPANDED PERKINS RANGE DELIVERS NEW OPPORTUNITIES FOR CONSTRUCTION OEMS Perkins announced at the show that the company has expanded its industrial engine range with the launch of four new product platforms. The 9-to-18-lit re range enables construction equipment manufacturers to benef it from Perk ins’ proven performance and engine durability up to 597 kW (800 hp). A19 The addition of a 9-litre 1700 Series, a 13-litre 2200 Series, a 15-litre 2500 Series, and an 18-litre 2800 Series, more than doubles the power range previously of- Continued - A20 Serving Northern & Southern Ontario with 24/7 Service. Contact us today to discuss your heavy truck & equipment repair needs. HAMILTON 28 Rowanwood Street, Hamilton, ON Canada, L8L 7H3 905-545-5417 HUNTSVILLE 6 East Airport Road, Huntsville, ON Canada, P1H 1X7 705-789-5711 email: [email protected] mactekhydraulics.com Authorized Caterpillar hose and coupling distributor Perkins Engines doubles its power range offering—extending it to 8.2-597 kW (11-800 hp) with the introduction of four new engines. Authorized exclusive dealer for ONTARIO: 647-235-0807 450-745-0303 [email protected] CRUSHING SCREENING MINING QUARRYING PAVING RECYCLING EQUIPMENT www.conderoc.com ® AMERICAN-MADE INNOVATION SINCE 1966 THIS IS HOW WE CRUSH EVERY JOB ... EVERY DAY! TM Screen Machine products are better — by design, by manufacture and by performance: • 50+ years in business • American-Made in Columbus, Ohio, USA • Assembled with US-made Grade 80 steel — the strongest and most durable available! • Patented innovation available nowhere else For your crushing and screening needs, choose the best — Screen Machine — and CRUSH EVERY JOB! 740-927-3464 [email protected] Learn more at www.screenmachine.com ScreenMachine0617.indd 1 5/16/2017 4:17:19 PM A20 MAY 29, 2017 @EQUIPJOURNAL The Power of New Solutions Continued From - A19 fered by Perkins, extending it to 8.2-597 kW (11-800 hp). Andy Zuckerman, Americas Sales and Distribution Director, said: “Our four new eng i ne plat for ms are specifically designed to meet ou r customers’ strategic and commercial requirements. We’ve developed a modular engine architecture which delivers the right performance, while enabling customers to develop single machine designs adaptable to multiple emissions standards. We know what it takes to work alongside our customers as they continue to create differentiated and competitive machines, and we are confident this new 9-18 litre engine range, which offers f lexibility for installation and servicing options, will provide them with the right platform for their business growth.” FINANCING AVAILABLE D! REDUCE With power output ranging from 235-285 kW (320-388 hp), the new EU Penta’s Stage V concept features a common-rail injection system and uncooled exhaust pressure governor , as well as an EPG and inlet throttle. VOLVO PENTA REVEALS ITS STAGE V CONCEPT—OPTIMIZED FOR TOMORROW 2014 DEERE 244J LOADER, 1134 hours, quick attach, good rubber, Horst hydraulic angle entendable blade and JD84 broom available. $79,900 IN CORNWALL, ON 2009 DEERE 304J LOADER, 3180 hours, quick attach, good rubber, Horst hydraulic angle entendable blade and JD84 broom available. $54,900 IN CORNWALL, ON 2008 VOLVO L220F LOADER, great 1993 CAT IT28G LOADER, high history, current clean oil samples, houred but nice and straight, 3 yard 7.5 yard bucket, new radial L3 tires, bucket, 30% rubber, forks available. nice and straight well maintained. $109,000 IN HALIFAX, NS $28,000 IN CORNWALL, ON 2010 JCB 3CX LOADER BACKHOE, only 1831 hours, front hyd.quick attach, front auxiliaries, mechanical thumb, ride, a/c, clean, forks and 8’ angle blade available. $59,000 IN HALIFAX, NS 2012 DEERE 180G EXCAVATOR, roughly 4500 hours, hydraulic thumb, pin grabber Q/A, 65% U/C, 24” pads, 10’ stick, good condition. $109,000 IN HALIFAX, NS 2010 DEERE 350D LC EXCAVATOR, 8200 hours, 28” pads, 12’ stick, 70% U/C, wedge Q/A, 60” tooth bucket. $65,000 IN HALIFAX, NS 2007 KOMATSU D37EX-21 DOZER, 6-way, like new U/C including pads, new paint, nice & straight, 6800 hours, runs A1. $41,500 IN HALIFAX, NS Volvo Penta revealed its Stage V concept. The Stage V line-up includes all five engines (D5, D8, D11, D13, and D16) offering the same power range from 105 to 565 kW (143-770 hp) as Volvo Penta’s existing offer for industrial, off-road applications. A D11 engine and its perfectly matched exhaust aftertreatment system (EATS) were on display to demonstrate the company’s Stage V platform. The new Stage V range ensures installation commonality between different emission levels. The engine program will be consistent, from Stage II to Stage V. For Stage V, t he eng ine has been equipped with a fixed geomet r y t u rbo, wh ich cont r ibutes to reduced HARDING EQUIPMENT INC. Kevin: 902-222-1045 or email: [email protected] www.lepltd.com Toll Free: 866-205-1002 complexity, improved fuel consumption and increased efficiency. A common-rail injection system reduces noise levels and delivers reduced fuel consumption. Volvo Penta has selected to use uncooled exhaust gas recirculation (EGR), which delivers highly effective heat management for the engine. An electrical exhaust pressure governor (EPG) and inlet throttle enable the system to function without the need to inject fuel into the exhaust stream to raise the temperature. With this approach, the exhaust gas has an optimal temperature when it passes through the EATS. Low heat rejection from the complete system means that less cooling is required. This powerful combination leads to increased efficiency and uptime for the operator. 450-437-8848 [email protected] FAX: 450-430-5352 1983 PAYSTAR 5000, 4x4, Cummins 270, auto trans, front harness - clean. $19,500. 1983 WESTERN STAR, 6x6, Cummins 270 HP, 18-46 axles, good condition! $57,000. 1987 FORD F-700, 4x4, GM Diesel, long frame, good condition. $15,500. 1988 JETAIR II, Cummins, high-velocity air duct, very clean. $55,000. 1978 SMI 5250, GM - GM, low hours, $39,500. fresh paint. 2003 BOMAG 180AD Cummins, 5,800 hours, 66” drum. P.O.A. 2006 BOMAG 184AD-AM, 66” drum, low hours, Cummins super!! P.O.A. 2000 TEREX CR551 ASPHALT PAVER, Cummins, 10-20 ft screed. P.O.A. 2007 DYNAPAC CC432V ROLLER, 66” drum, Cummins, 4200 hrs. P.O.A. 2008 DYNAPAC CC122, 48” drum, low hours, water system, clean. P.O.A. 1993 SMI MODEL 7250A, GM - GM 460 HP, 2200 hrs, 3000 T.P.H, super clean. $139,000. SMI 7200 ribbon blower, rebuilt 1997 G.M. V-12. P.O.A. 2003 VOHL DV-4000 LOADERMOUNT BLOWER, c/w JD 275 hp motor telescopic chute. $57,500. 1996 SMI 8400, 4000 tons per hour, G.M - G.M, 710 hp. $149,000 1990 SMI 5250A c/w 2 GM diesels, front & rear, 2000 T.P.H., very clean, low hrs. $75,000. @EQUIPJOURNAL A21 MAY 29, 2017 Large Caterpillar Dispersals at Ritchie Bros.’ April Auction in Edmonton Ritchie Bros.’ April auction in Edmonton, Alberta is always a big event, as thousands of people from across Canada and around t he w orld c omp et e for equipment consigned by top companies in Alberta. This year’s auction—the company’s largest Canadian auct ion of t he year—attracted 13,800 people from 60+ countries, as 8,650+ items were sold over four d a y s (A pr i l 2 5 –2 8) f or CA$184+ million. As well, many of the largest purchases were groups of Caterpillar machines. »» 2 2014 Caterpillar 336EL hydrau lic excavators sold for a combi ned CA$760,000 AUCTION HIGHLIGHTS Equipment in the auct ion was sold for 1,190+ owners—a new site record. Highlights included 235+ excavators, 230+ compactors, 145+ bulldozers, 85+ loaders, 70+ articulated dump trucks, 55+ motor graders, 40+ agricultural tractors, 140+ dump trucks, 135+ f latbed trucks, 90+ boom trucks, 50+ winch tractors, 180+ aerial work platforms, 250+ truck tractors, 935+ CATERPILLAR HIGHLIGHTS trailers, 315+ pickup trucks, and a large selection of con»» 9 Caterpillar 740B 6x6 sumer items and real estate. articulated dump trucks Approximately 66% of the sold for a combi ned bidders in the auction regisCA$2.245 million tered to participate online and purchased CA$105+ million of the equipment. Canadian buyers purchased 86% of the equipment, includ i ng 50% boug ht by Albertans. International buyers purchased 14%, from such countries as Finland, New Zealand, and Japan. “As act iv it y levels are picking up in the Alberta market, and spring work projects get underway, we witnessed huge crowds and positive pricing across all equipment categories this week at our four-day Edmonton auction,” said Brian Glenn, Senior Vice President, Ritchie Bros. “Western Canadian buyers outpaced all others, demonstrating brewing confidence in the oil and gas sector.” HAMMERDEPOT.COM ® PLEASE VISIT OUR WEBSITE FOR SPECIAL DEALS Hammerock Equipment Inc. We are you Hammer Superstore Proudly serving customers for over 50 years. CALL US TOLL FREE 1-877-426-6373 ROCKRAM & DYNATEC HAMMERS AND COMPACTOR PARTS Hablamos Español 1-360-635-0345 1-877- HAMMER3 TOOLS AND PARTS FOR... Allied, Atlas Copco, Rammer, Caterpillar, Tramac, BTI, Teledyne, Soosan, Toku, Stanley, Okada, NPK, Kent, Indeco, Case, Kubota, Hukie, Stelco, Kobex, Magnum, MSB, Hanwoo, Demac, Scorpion, John Deere, Terex, Cobalt, Bobcat and many many more... NEW, USED & REBUILT HYDRAULIC HAMMER PARTS HAMMERS HYDRAULIC HAMMER TOOLS HYDRAULIC COMPACTORS RUBBER CUSHION MOUNTS »» 7 Caterpillar D8T crawler tractors sold for a combined CA$2.095 million »» 5 Caterpillar 627G motor scrapers sold for a combined CA$1.815 million »» 7 Caterpillar 14M VHP Plus motor graders sold for a combined CA$1.685 This 2006 Caterpillar 627G MSC sold for CA$410,000 at the Ritchie Bros. million April auction in Edmonton, Alberta. VISIT US AT THE BIG EVENT CANADIAN MINING EXPO May 31-June 1st, Booth #R3-07 (Arena 1) RENT ME RENT OR BUY NEW & UNUSED BUY ME 416.770.7706 or 705.566.8190 www.bmcdowell.com [email protected] B145-163 2014 MOROOKA MST 2200VD, Cat 7.1 diesel eng. 225 hp, encl. cab w/heat & A/C, hyd. trans., max. payload: 24,255 lbs, 30” rubber tracks. B145-156 2014 CAT 725C, Cat C9.3 Acert diesel eng. 320 hp, 6 wheel dr., 26 ton payload, 19.4 cu.yd. heaped body cap., A/C, box liner, 23.5R25 Bridgestone tires. B140-91 2015 FORD F550 SERVICE TRUCK, 6.7 ltr. powerstroke V8 diesel eng., 4 wheel dr., 6 spd auto trans., 19,500 lb GVWR, power wndws+locks+mirrors, heat, A/C. B160-136 2013 CAT 336DL, 21’4” boom, 12’10” stick, 32” pads, pin grabber, 54” bucket. B145-134 2014 LINK-BELT 240X2, 19’2” boom, 11’6” arm, Isuzu diesel eng. 177 hp, 31.5” shoes, A/C, Esco 48” 1.87 cu.yd. HDP bkt c/w ultra lock teeth, AM/FM. B160-172 2017 LINK-BELT 80SB SPIN ACE, Isuzu Tier III eng.54 hp, operating weight: 18,900 lbs., 8.59 metric tons, 17’7” boom, 6’11” arm, front dozer blade. RENT OR BUY RENT OR BUY RENT OR BUY B110-141 2011 KAWASAKI 65TMV-2, Cat IT Q/C hook up, 2.75 cu.yd. bkt, 48” pallet forks, encl. cab w/heat & A/C, ride cntrl. B110-156 2012 KAWASAKI 80ZV, Cummins eng. 198 HP, Cat Fusion Q/C, 4 cu.yd. bkt & forks avail., encl. cab w/heat & A/C. B110-142 2011 CAT 950H, 3.75 cu.yd. bkt w/bolt on cutting edge, 23.5x25 tires, encl. cab w/heat & A/C, ride control. RENT OR BUY 2 Shops & 14 Bays - Service You Can Count On! • Highly Recommended Repair Shop with Long Time Employees. • Knowledgeable, Trained, Parts Professionals. RENT OR BUY 1 of 6 B200-348 2014 New/Unsued WANCO Standard Diesel Light Tower. OEM PARTS & SERVICE RENT OR BUY RENT OR BUY B200-346 B60-04 2016 AMMANN AP240, Cummins 2015 AMMANN ASC130PD, 84” GETMAN ANFO TRUCK, 20’ power, ballast weight 24 tonnes, padfoot or smooth, Cummins pow- reach man basket, Deutz er, 13 ton roller, cab w/heat & A/C. ROPS, cab w/heat & A/C. F6L912W eng., 12V sys. RENT OR BUY $9,500 $17,500 B184-0007 RENT OR BUY B250-32 1998 INGERSOLL RAND P375W- BOBCAT MT55 JD, 375 cfm @ 100 psi,12V elect. starting system. Compaction Compact Equipment RENT OR BUY RENT OR BUY B130-78 B100-657 2008 CAT D8T, Cat C15 engine, 16’5” wide, dual cyl. tilt, winch, encl. cab w/ heat & A/C, rear screen, powershift trans., 26” track shoes, diff.steering. Trailers/Floats Hammers B130-80 2013 CAT D6N LGP, 13’4” power angle tilt blade, 33” extreme service pads, low ground pressure, Paccar model PA55 winch, encl. cab w/heat & A/C. Wheel Loaders RENT OR BUY B130-66 2010 CAT D8T, Semi U blade-DAT avail., multi shank ripper, 24” pads, Accugrade ready, 100% new undercarriage, Breco ESS pads & HD links, A/C. Air Compressors A22 MAY 29, 2017 @EQUIPJOURNAL 5804 Datsun Rd, Mississauga,ON L4W 1H2 289-247-1057 AQUATECH Combination Jet/ Vac Systems VISIT US AT AORS JUNE 7-8TH MILVERTON, ON BOOTH 332 & 333 OUTSIDE Perfect solution for roadside work over guardrails! ANTRAQUIP Cutter Attachments BAGELA Portable Asphalt Recyclers BLAXTAIR Pedestrian Detection System BROCE Self-Propelled Brooms CIMLINE Pavement Maintenance Group DURA PATCHER Spray Patcher E.D. ETNYRE Asphalt Distributors & Chipspreaders e Availab!l Now FALCON Road Maintenance Equipment GRADALL Telescopic Boom Excavators JOHNSTON Street Sweepers Sale $89,500 (CDN) or Rent $7,500/month 2014 Tiger Wildkat Side Shift Boom Mower, cab joystick controls, choice of 75”flail head with grass knives or 60”rotary head with grass knives. Factory mounted on 2014 John Deere 5100E tractor. KPI - JCI - AMS Crushing, Screening, Washing & Conveying KUEPER Plow Blades O’BRIEN Hydrojetters GLOBAL SWEEPING Mechanical Street Sweepers UPCOMING EVENTS 2017 THE BIG EVENT CANADIAN MINING EXPO May 31 - June 1, 2017 McIntyre Community Centre Timmins, ON https://canadianminingexpo.com SAWTECH LOGEXPO June 23-25, 2017 Tradex - Trade and Exhibition Centre Renfrew, ON www.sawtechlogexpo.com 2017 ASSOCIATION OF ONTARIO ROAD SUPERVISORS MUNICIPAL PUBLIC WORKS TRADE SHOW June 7-8, 2017 Perth East Recreation Complex Milverton, ON http://aors.on.ca/events/aors-trade-show/? PUBLIC WORKS EXPO August 27-30, 2017 Orange County Convention Center Orlando, FL http://www3.apwa.net/pwx ATLANTIC TRUCK SHOW June 9-10, 2017 Moncton Coliseum Moncton, NB www.atlantictruckshow.com SOUTHERN FOREST PRODUCTS ASSOCIATION FOREST PRODUCTS MACHINERY & EQUIPMENT EXPOSITION 2017 June 14-16, 2017 Georgia World Congress Center Atlanta, GA www.sfpaexpo.com SWIFT 2017 September 18-21, 2017 Halifax, NS swiftconference.org CONSTRUCT 2017 September 13-16, 2017 Providence , RI www.constructshow.com/Attendee/Home LANDSCAPE ONTARIO SNOWPOSIUM  September 28, 2017 Milton, ON www.snowposium.ca POWER PAVERS Slipform Pavers Visit EquipmentJournal.com for daily news, events & updates POWER CURBERS Slipform Curb/ Barrier Machines PROMAC Hydraulic Brush Cutters & Attachments New! e Availab!l Now Sale $169,500 (CDN) or Rent $10,000/month RUBBLEMASTER Portable Compact Crushing AEBI SCHMIDT Rear Discharge Spreaders Rotating Telehandlers Beat Scaffolding in Bridge Work Continued From - A11 2014 Tiger Bengal Brute Boom Mower, 50”flail head with medium brush/grass knives. Electro-hydraulic cab joystick controls and valve kit. Factory installed and mounted on new John Deere 6105M Tractor TECWEIGH Belt / Scales TIGER BOOM/ROTARY/ FLAIL MOWERS and the load. According to the manufacturer: “If stability is less than that required for safe operation, any furt her aggravating movements are immediately blocked. This allows the operator to place the stabilizers as he requires, and the load diagram will be automatically and dynamically adjusted to suit the stabilizer position.” The system checks machine sta- www.amacocei.com Moore Strength, Moore Productivity, Moore Comfort JS160 JS145 » Max Operating Weight: 31,676 lbs » Max Dig Depth: 19’9” » Gross Engine Power: 109 hp » Max Operating Weight: 40,664 lbs » Max Dig Depth: 20’7” » Gross Engine Power: 125 hp WE ARE YOUR AUTHORIZED JCB DEALER FOR: Backhoe Loaders Skid Steer Loaders Compact Track Loaders Wheel Loaders Hydraulic Excavators » » » » » Mini Excavators Telescopic Loadalls Rough Terrain Forklifts Compaction Equipment Light Equipment VISIT US: MOOREJCB.COM TORONTO E H AV FINC OAKDALE RD. . WESTON RD » » » » » 370 OAKDALE RD., TORONTO, ON M3N 1W5 1-800-561-3212 416-747-1212 Nick D’onfrio 416-417-1539 [email protected] *NEW LOCATION MONTREAL ROUTE TRANSC 1-800-363-4958 514-333-1212 Chris Schnur 416-605-8777 [email protected] 40 ANADIENNE 4955 CHEMIN ST FRANÇOIS, ST. LAURENT, QC H4S 1P3 13 IS CO AN M IN E CH ST FR RU E SA IN T Denis Fortin 514-444-4280 [email protected] SALES, PARTS & SERVICE AM OU R bilit y automatically and continuously, so that the operator can focus on the work. The telehandler’s hightech access plat for m equipped with a telescopic boom and incorporating its own extension and slewing functions is referred to by the manufacturer as “Space System”; this feature makes it possible to reach less accessible places. The Space System can be configured to provide personnel ac- cess over 9 metres (29.5 feet) below street level. “Usi ng t he Roto w it h the Space system saved us time and money without compromising safety,” says Soncin. Another benefit to MCSS telehandlers is the Merlin (Merlo Local Interactive Network) system; the system provides a new way to electronically manage all the operating parameters of the machine. The main operating conditions and all information necessary to the operator are continuously displayed in real time. The Merlin system a lso manages all safety functions, is a tool for advanced and remote diagnostics, and can serve as an anti-theft system and immobilizer. The Merlin system features real-time display of the centre of gravity position of the machine and load, and how it moves during machine operation. The system also monitors the distance between the load and ground, distance between load and machine centreline, and the weight of the load being handled. The operator can predefine the working area of the machine by pre-setting the limits for turret rotation, boom lift angle, and extension. A digital multifunctional radio control allows the operator to remotely control the machine, and the radio control is bi-directional, meaning it can both send and receive commands to and from the machine. @EQUIPJOURNAL MAY 29, 2017 T:10.375” A23 S:9.375” ENTIRE FACTORY. Forward-thinking solutions that can make a big impact on your business. INDUSTRIAL SIZED SOLUTIONS Visit acklandsgrainger.com S:14.25” IT STABILIZED AN T:15.25” THIS DIDN’T JUST SECURE A LOOSE FOOTING, A24 MAY 29, 2017 @EQUIPJOURNAL MUNICIPAL WORKHORSE 3CX Compact 3CX Super Saddle up to your dream backhoe today. Visit JCBNA.com to learn more. With industry leading lift capacity on both the front and back end, we aren’t horsing around when we say the JCB 4CX is the most productive municipal backhoe loader on the market. This equal-sized tire machine provides excellent flotation and traction, delivers over 10,000lbs loader lift capacity and easily loads a tri-axle truck. The 3-steering modes (crab, 2-wheel and 4-wheel) result in the most versatile backhoe loader on the market. Available with seat mounted pilot controls and a suite of automation features, the 4CX provides the ultimate in operator comfort. Better yet, it’s just one of the many models available in the family of the world’s best selling backhoe loaders. YOUR FAMILY OF LOCAL JCB DEALERS ONTARIO Advance JCB Harriston: 519-510-5878 Waterloo: 519-742-5878 Church’s Equipment Barrie: 705-458-0870 John’s Equipment Sales & Service Wajax Hamilton: 905-383-3654 London: 519-685-1172 Mississauga: 905-624-5611 Ottawa: 613-739-2990 Timmins: 705-267-7000 Thunder Bay: 807-577-1111 Sudbury: 705-692-3656 Windsor: 519-944-8118 Frankford: 613-398-6522 NOVA SCOTIA Miller Technology Wajax QUEBEC NEWFOUNDLAND BRITISH COLUMBIA Moore JCB Harvey JCB Wajax Montreal: 514-333-1212 ALBERTA Langley: 604-513-2216 Prince George: 250-562-7321 Sparwood: 250-425-9900 Kamloops: 250-374-5055 Nanaimo: 250-755-2005 Cervus Equipment SASKATCHEWAN Calgary: 403-243-2011 Edmonton: 780-448-4522 Ft. McMurray: 780-714-9200 Red Deer: 403-346-9011 Wajax St. Johns: 709-738-8925 Corner Brook: 709-634-4336 Wajax Chambly: 1-877-GO-WAJAX Laval: 1-877-GO-WAJAX Quebec City: 1-877-GO-WAJAX St. Felicien: 1-877-GO-WAJAX Saskatoon: 306-934-2858 North Bay: 705-476-4343 Dartmouth: 902-468-7352 Moore JCB MANITOBA Wajax Wajax Moncton: 506-857-8870 Toronto: 416-747-1212 Winnipeg: 204-255-2214 /JCBNA @ @JCBNA NEW BRUNSWICK JCBNA 4273 @EQUIPJOURNAL MAY 29, 2017 USED EQUIPMENT 2012 D5K2LGP DOZER $211,000 WITH SALT U/C,LGP,CAB, 126.7” BLD,26” MS. PRICE $77,000 $267,000 WITH XL,CAB 104” BLADE, MS, SALT. PRICE $87,000 PRICE $43,000 PRICE PRICE 2005 CAT IT28GII LOADER 2015 CAT 323FL EXCAVATOR WITH AUX. HYDRAULICS, 48” BUCKET, LOW HOURS. $57,000 2002 CAT 924G WHEEL LOADER WITH MA5 VERSALINK LTD SLIP FRONT R/C MICHELINS 2.2 CYD BKT. PRICE 2003 CAT CB534D ROLLER PRICE $245,000 2011 CAT 725 ARTICULATED TRUCK WITH HEAT,CLD START,LINER,AL. $128,000 WITH CANOPY,VERSA-VIBE,COCOA MATS,HITCH. WITH CAB, A/C, AWD STD SHIFT LINES MP T3. $266,000 2010 CAT 730 ARTICULATED TRUCK $255,000 WITH CAB,AIR,EC2,AIR RIDE,L-SLIP,3V,QC,BKT. $55,000 2011 CAT D6TLGP DOZER WITH BLADE,LGP,36”ES,RIPPER. PRICE PRICE 2014 CAT 420FIT BACKHOE LOADER $278,000 WITH BOX HEAT, LINER. WITH CAB/AIR, COMBO HYD,BKT. $105,000 2011 CAT D6NLGP DOZER PRICE 2007 CAT 420EIT BACKHOE used.toromontcat.com WITH 33”ES,LGP,RIPPER HYD. PRICE 2012 CAT D3K2XL DOZER FOR MORE USED EQUIPMENT, VISIT PRICE PRICE PRICE $117,000 B1 2011 CAT CS56 COMPACTOR ROLLER WITH EROPS,AIR,SMOOTH DRUM. PRICE 2011 CAT 336EL EXCAVATOR WITH 21’4”BM,12’10”STK,34”TGB,QC,TC,HP,AL. Contact your local Toromont Cat sales representative for details. $239,000 2010 CAT 328DLCR EXCAVATOR WITH CAB/AC,20’3”BM,10’6”STK,QC,TC W/HP. 1 800-268-1965 B2 MAY 29, 2017 @EQUIPJOURNAL MEET THE AMMANN FAMILY OF PRODUCTS MAXIMIZING YOUR INVESTMENT What do the smallest Ammann plate compactor, the largest asphalt plant and every product in-between have in common ? • Innovation that boosts productivity and efficiency, ultimately improving your bottom line • Parts and components that ensure long life to maximize your investment • The commitment of a family business that has thrived in the construction industry for nearly 150 years by keeping promises today – and knowing what customers will need tomorrow For additional product information and services please visit : www.ammann - group.com GMP-1187-00-EN | © Ammann Group Website link on equipmentjournal.com for $500/ yr. or $300/yr. (plus applicable taxes) with your paid advertisement in Equipment Journal. Phone: 1.800.667.8541 email: [email protected] Aggregate Manufacturers Attachments & Parts Ontario Ontario Crushers, Screeners, Material Handling 1-855-448-3722 Auctioneers Crane Sales & Rentals Equipment Rentals Generators Service & Repairs Heavy Equipment Dealers ÉQUIPEMENT CONDEROC EQUIPMENT Since 1946 Heavy Equipment Manufacturers ® @EQUIPJOURNAL EQUIPMENT // FOCUS MAY 29, 2017 B3 ROADBUILDING Hamm introduces DV+ Tandem Rollers to North America Hamm set a new trend for compaction in North America with the introduction of its new DV+ series tandem rollers. For the launch at ConExpo-Con/Agg last March, Hamm presented a DV+ 70i model weighing 7.7 tons. Other models are set to follow in 2018. These pivot-steered DV+ series tandem and combi rollers are economical to use, easy to operate, and designed for maximum productivity, claims the company. An intelligent drive control plus pivot steering with four steering modes and large turning angles form the basis for the highest possible compaction quality. The design is well thought out, enabling an excellent view of the drums and the work environment, an important point when it comes to getting the smoothest mats and satisfying the strictest quality and safety requirements. LONG WORK INTERVALS = HIGH PRODUCTIVITY Refuelling breaks interrupt the compaction process. To avoid them, Hamm has equipped the DV+ series tandem rollers with large water and fuel tanks. Filling is extremely user-friendly because the water can be replenished centrally from the ground very quickly via a pressurized supply of at least 14.7 psi as a standard feature. Because the tanks are linked together via communicating pipework, they are filled simultaneously. Connection to a hydrant is also an option. Alternatively, water can be gravity-fed from above in the traditional way via one of the four filling spouts on the top. Replenishment of diesel and hydraulic fluid is also conveniently arranged: both can be carried out from ground level. THE EASY DRIVE OPERATING CONCEPT Despite the extensive machine functions, operation of the DV+ is intuitive and quickly learned. The key to this is the Easy Drive operating concept, developed by Hamm in collaboration with universities and experts in ergonomics, as well as roller drivers from different countries. At the heart of the operating concept is an ergonomically optimized operator platform with many inventive details. For example, the seat allows the driver to adopt a relaxed sitting position, facing in the direction of travel in all situations, as it can be turned mechanically by 90 degrees in either direction, and shifted to the left or right as standard. As an option, the seat can also be electrically shifted and rotated by up to 350 degrees. The height, suspension, and depth of the seat, as well as the position of the armrests, also are individually adjustable, as is the steering column angle. Thanks to the wide range of adjustment options, drivers will quickly find a healthy sitting position in the DV+, whatever their physique. Another key feature of Easy Drive is its operating structure. A steering wheel is used for steering. All other important functions are operated via a joystick and the multifunction armrest. Here, the driver is able to see all the keys on the joystick. All other operating elements are arranged around the joystick in such a way that the most frequently used ones are placed closest to it. At the same time, the operation is designed to be entirely language-neutral. Hamm uses colour coding to achieve unambiguous assignment of the functions and a clear overview. Easy Drive provides numerous benefits in and around the operator platform as well, such as a wide access way to the platform or spacious cab, foldable armrests (on request), or an easy exit with tiltable steering column. In this way, getting on and off becomes even easier and safer. Documents and personal items can be securely stored in the many compartments around the seat, and two 12 V sockets provide power for a cell phone or ice chest. Last but not least, in the optional cab, excellent sound insulation reduces noise levels from the already quiet engines. ALL-ROUND VISIBILITY FROM THE PLATFORM AND PANORAMIC CAB The Hamm DV+ is available as a tandem roller with double vibration drums or with oscillation and vibration drums, and also as a combi roller. be used even in the most strictly regulated markets, such as California. The new automatic engine stop system can also be incorporated as an optional extra; it switches the engine off during extended periods of inactivity, saving fuel. PRECISE STEERING AND SMART DRIVE CONTROL Hamm offers two versions of the DV+ for North America: with ROPS roof or with fully glazed ROPS panoramic cab. In both cases, drivers of the DV+ can enjoy a good view of the drum edges at all times. This has been made possible through the innovative design of the platform or cab and of the water tanks. A special feature is the glass viewing pane in the floor that allows an unobstructed view of the drums from above. On the models with ROPS cab, standard split doors ensure ample fresh air: the upper half can be rotated by 180 degrees, the lower by 85 degrees. When the door is closed, air is led through the window vents to the interior, and in winter, ventilation slots ensure speedy de-icing. With the DV+, surfaces can be quickly compacted to a high standard because all components in these rollers are perfectly matched to one another. An important factor is the always evenly distributed weight of the DV+. This is due to the positioning of the engine in the center of the machine and the two-part water tank distributing the weight evenly in all operational states. The standard split drums fitted as standard feature vibration, and represent a further plus factor for quality. They ensure perfectly compacted asphalt layers, even in tight curves. There is also a very large turning angle, and the enormous track offset of the pivot steering allows the DV+ to be steered with great sensitivity in four different steering modes. FUTURE-PROOF ENGINE TECHNOLOGY THREE MODELS WITH MANY OPTIONS AVAILABLE All DV+ series models are equipped with state-of-the-art engines. This enables the DV+ 70i with its 75 hp (56 kW) engine to satisfy the requirements of Tier 4 / Stage IIIB emissions requirements. The power pack filters the soot particles with a highly effective diesel particulate filter as part of the exhaust gas purification. This means that the rollers are equipped with future-proof technology that can The first roller in this series to be launched in North America will be the DV+ 70i with an operating weight of 7.7 tons. It will be available in three versions: as a double vibration roller (VV), as an oscillation roller (VO = vibration drum at front, oscillation drum at rear), and as a combi roller (VT) with vibratory drum front and pneumatic tires at rear. All vibration drums are split. B4 MAY 29, 2017 @EQUIPJOURNAL Volvo PT125C—Where Rubber Meets the Road The new PT125C pneumatic tire roller from Volvo Construction Equipment is a versatile and durable machine that ensures quality compaction and reliable uptime. Vo l v o C o n s t r u c t i o n Equipment’s PT125C ninewheeled pneumatic tire roller is an adaptable machine that delivers uniform smoothness and long-lasting performance. Designed for roadway construction and resurfacing applications, the machine employs a kneading action for the compaction of hot and warm mix asphalt. The PT125C is also appropriate for chip seal applications, thanks to its heavy-duty 14-ply tires, which press the aggregate into the binder without fracturing. “The PT125C would be a great fit for any job using stiffer mixes, or as a complement to compactors on any asphalt paving job where high density and smooth finish are key factors,” said Mark Eckert, Global Product Manager at Volvo Construction Equipment. PRESSURE MAKES PERFECT The maximum operating weight of the machine can be adjusted from 4,450 kg (9,830 pounds) to 11,340 kg (25,000 pounds) by ballasting with different materials. This, plus the central tire inflation system enables the operator to meet the pressure desired on a particular job. By adjusting the air in the tires, the operator can secure high contact pressure at a moment’s notice. The rubber tires are built to carry the heaviest loads for increased performance without compromising component life. The four front tires are staggered in position to provide overlap with the five rear tires, resulting in full width coverage. Front and rear tires oscillate independently and conform to the work surface to deliver uniform density and sealing, even on irregular surfaces. By maintaining consistent contact with the material, rutting is minimized and f laws are eliminated, en- Designed for roadway construction and resurfacing applications, the Volvo PT125C employs a kneading action suring a superior mat finish. for the compaction of hot and warm mix asphalt. SMOOTH OPERATION The PT125C is equipped w ith a range of features that help to accommodate for variable site conditions. The ISO certified two-speed hydrostatic transmission ensures smooth directional changes between forward Same Day Nationwide Shipping Service No Surcharge PUSH PULL PUSH-PULL, BRAKE, CLUTCH, PTO, VALVE and ACCELERATOR CABLES DIV. OF RING DIV. OF RING RADIATOR RADIATOR PRODUCTS PRODUCTS (1989) (1989) LIMITED LIMITED Ontario Control Cables 8C C ., B , O L6T 4P8 ARSON RT RAMPTON N (905) 458-9576 Fax: (905) 458-6461 E-Mail: [email protected] Same Day Service And Shipping If Ordered By 12 Noon! We Accept: * MasterCard® and reverse, enabling operators to achieve fast cycles without scuffing the material surface. Rolling speeds of up to 19 km/h (12 mph) are achievable in each direction, increasing productivity and reducing cycle times. Whatever the application or condition, the ROPS or FOPS canopy protects the operator and provides good v isibilit y all around the machine, enhancing both operator and jobsite safety. For improved ease of use, all controls are ergonomically positioned within easy reach. The canopy can also fold down for easier, safer transport. POWER UP, COSTS DOWN UPTIME Powered by t he Tier 4 Final D3.3 Volvo engine, the PT125C provides high-performance compaction to finish the job on time and within budget. The 55.7-kW (74.3-hp) engine offers lower fuel consumption, reduced noise level and reliability for the best performance. The automatic idle feature reduces the engine speed when controls are inactive for more than five seconds. To b o o s t pr o duc t i v it y, passive regeneration automatically cleans the filters, without operator input or negatively impacting performance. The tire-wetting system on the PT125C prov ides uniform coverage to prevent material pick-up, while the triple filtration system minimizes the risk of failure caused by water tank contamination, explains Volvo. The hinged door provides complete access to the engine compartment and all major service components, while removable panels provide entry to less frequently serviced items. With ground-level access and unobst r ucted daily checkpoints, servicing is made simple. TOP NOTCH SERVICE Authorized Dealer For: In-house rebuilding, remanufacturing and testing capabilities of all types of powertrains & drivetrains. 905-696-8328 www.cphes.ca EXCLUSIVE DEALER FOR 1250 Mid-Way Blvd. Mississauga, ON L5T 2B8 CALL YOUR LOCAL SALES REP: Brian Renaud General Manager (519) 504-7939 [email protected] Chris Anderssen Central Ontario (416) 435-0855 [email protected] Alain Marenger Eastern Ontario (613) 293-0303 [email protected] Mark Stufko North East Ontario (613) 433-7969 [email protected] A DIVISION OF ELECTRIC FORK LIFTS @EQUIPJOURNAL MAY 29, 2017 B5 New SW654ND Features Sakai’s Unique Dual Drum Vibe/Oscillation Launched at ConExpo-Con/Agg, the Sakai SW654ND features a side clearance of 67 mm (2.5 inches) with curb clearance of 705 mm (28 inches). The new Sakai SW654ND offers today’s paving cont rac tors a n osc i l lator y tandem drum roller in a 1.48-metre (58-inch) drum width for speedier, more profitable compaction. The design upgrade offers improved operating efficiency as well as ease-of-maintenance. Applications include both thin and thick asphalt lift compaction, as well as compaction of coarse graded asphalt mixes and aggregate base and sub-base layers. The SW654 tandem roller’s fuel efficiency is based on a 3.3-litre Kubota, EPA Tier 4 emissions compliant engine coupled with Sakai’s new ECO Compaction Mode (ECM). ECM reduces fuel consumption up to 37% claims the company. The SW654ND roller features Sakai’s unique “ND” con f ig u rat ion. N D-series asphalt rollers have independent dual drum v ibrat ion or oscillat ion capability from twin eccentric shafts. Amplitude and frequency for the ND version of the SW654ND are 0.52 mm at 2,940 vibrations per minute. “While vibration is still used on the overwhelming majority of compaction jobs to achieve density,” Steele said, “we are seeing more and more jobs spec’d as ‘no-v ibe’, meaning t hat you cannot engage your vibration,” said Josh Steele, Market ing Manager for Sakai. Sakai’s unique ND configuration, he said, increases versatility by giving paving contractors a choice between up-and-dow n v ibrator y action and the gentler forward-and-back action of an oscillating roller on both drums. And the selection can be made with a flip of a switch on the operator’s console for seamless transitions from the vibratory to no-vibe sections of a job on the fly. While oscillation mode is effective in both thin and thick layer applications, it is especially beneficial when a mat is being built up with thin layers or in jobs, for instance, paving over sensitive structures, such as bridges, in which vertical impact is undesirable. “Changing the direction of force from vertical to horizontal allows the drum, in effect, to massage the mat to density,” Steele said. Some other manufacturers feature dual-drum rollers pairing one vibratory drum with one oscillation drum on a rig. Steele said these mixeddrum rollers do not achieve the compaction quality of Sakai ND-series machines with dual-drum vibration and oscillation system, since two oscillating drums share the compaction work on a Sakai ND-series roller. “The result is gentler, smoother mat compaction to greater theoretical maximum density compared to single oscillating drum systems,” Steele said. “We even know of at least one cont ractor whose standard operating procedure required operators to use only static compaction for first passes. Otherwise, the use of their roller’s oscillation on the first pass caused material displacement. Our SW654ND, like all our Sakai ND-rollers, allows contractors to use oscillation on all passes without increased risk of displacement.” REMANUFACTURED TORQUE CONVERTERS • • • • • Backhoes Dozers Loaders Articulated Trucks Forklifts SUPER FAST 24 HR TURNAROUND TIME Name: Company: Type of Business: Address: City: Province: Telephone: Email Address*: Postal Code: Fax: *By entering my email address, I hereby agree to receive email correspondence from Equipment Journal (Pace Publishing Limited). I understand I can withdraw my consent at any time. Please rush our subscription today! We enclose payment for: SAVE THOUSANDS OVER!!! ALL MAKES John Deere • CAT • Clark 246 Brockport Dr #21 Toronto, ON M9W 6W2 416-674-7000 | 800-265-8923  1 Year $44.00 (Includes applicable taxes)  2 Years $72.00 (Includes applicable taxes) CHEQUE ENCLOSED  U.S. 1 Year $80.00 U.S. *H.S.T. #104003 7957 RT Foreign Rates Upon Request Account #:___________________________________ Expiry Date:__________________________________ Today’s Date:_________________________________ Signature:____________________________________ Mail order to: 5160 Explorer Drive, #6, Mississauga, ON L4W 4T7 Or FAX to 1-800-210-5799 or email [email protected] EJSUB2017 B6 MAY 29, 2017 @EQUIPJOURNAL Mauldin Introduces Advanced Oil Distributor Controls The evolution of technology in the oil distributor market continues to advance. Mauldin Paving Products launched the latest version of their Precision Spray Oil Distributor at ConExpo which showcases innovative cab controls, claims the company. By utilizing a seven-inch LED display, the operator can now easily read important information for operating and maintaining the machine. While spraying, the display illustrates a speedometer-like digital gauge with a green arc for operating at the dis- tributor’s optimal speed given the nozzle size, application rate, and bar width selected. Optimal speed ranges are automatically calculated to assist the operator in maintaining proper spray patterns. Travelling over or under the optimal speed range will cause the dial to move into warning zones. A maintenance screen within the display illustrates a full diagnostics panel providing status indicators of all inputs and outputs helping to reduce troubleshooting time. As an option, HD video feeds can be accessed quickly within the display to view backup cameras or to view the spray bar in action. Other features include: »» 400 gallons per minute heated asphalt pump »» Dual, thermostat-controlled diesel burners »» Easily accessible manhole from curbside ladder »» 8- to 16-foot (2.44-to 4.88metre) telescoping spray bar Mauldin’s Vice President Engineering, David Calder, introduces Mauldin’s new cab controls. LOOKING BACK ROAD MAINTENANCE SERVING THE CONSTRUCTION, DEMOLITION & MINING INDUSTRIES FOR OVER 50 YEARS Featuring a complete range of demolition attachments. From dedicated Steel Shears, Concrete Pulverizers, Multi-Processors, Scrap & Demolition Grapples, Screening/Mixing Buckets, Grinders & More! FOR DEMOLITION, EXCAVATION, MINING, CONSTRUCTION AND QUARRIES, TRAMAC HAS AN ATTACHMENT FOR THAT Ontario Office: 613-542-1500 28 Steve Fonyo Dr., Kingston, ON K7M 8N9 Montreal Office: 888-663-8122 3421 Industriel Boulevard, Laval, Que. H7L 4S3 Quebec City Office: 418-877-5557 1711 rte de L’aeroport #4, L’ancienne Lorette Q.C., Que. G2G 2P4 P ic t u r e d he r e, ne a rly a centur y ago, is road maintenance underway in Southern Ontario. Although the planning and building of local and county roads had begun in the mid-1800’s to encourage settlement in rural areas, the upgrading to include hard surfacing took place much later. Referred to as ‘Major Colonization Roads’ this network of 600 k m (nearly 1,000 miles) had been built in a 25-year period beginning in 1854. Several of these early roads, with improvements over many years, eventually became numbered Ontario highways, some as early as 1920. During this same time period a roofing contractor, Samuel Barrett, located in Chicago went about how the tar that was being used for roofing could be modified AUTHORIZED DISTRIBUTOR for gravel road application. By 1903 he had developed Tarvia. Barrett Industries soon set up shop across the US as the demand for his product grew. Eventually Barrett would supply not only the Tarvia product but also the equipment to apply it. By 1980, Barrett Industries became part of the worldwide Colas Inc. To see more than 50 restored pieces of v intage construction equipment in action, be sure to attend HCEA Canada’s 2017 annual events: The June 10-11 event ‘Wheels & Tracks in Motion’ and the October 14 ‘Last Blast’ event both held at the Simcoe Count y Museum near Barrie, Ontario. HCEA Canada is a Proud Community Heritage Partner of the Simcoe County Museum. ALL MAKES ALL MODELS POWERTRAIN SPECIALISTS Canada: Shaun Brown Cell: 613-532-4823 Office: 613-542-1500 Email: [email protected] YOUR HYDRAULIC ATTACHMENT EXPERTS TRANSMISSIONS - AXLES - STEERING PARTS - EXCHANGE - REBUILDS TARTEN EQUIPMENT LIMITED 6199 Shawson Drive Mississauga, ON L5T 1E5 Phone: 905 670 1704 Fax: 905 670 4790 Toll Free: 1 888 670 1704 WWW.TARTEN.COM COMMITTED TO SERVICE EXCELLENCE SINCE 1976 @EQUIPJOURNAL MAY 29, 2017 B7 Increase Job Opportunities with Versatile Paver The Power Curber 7700 is a multipurpose slipform machine that is designed for a wide variety of both off-set applications and paving up to 6 metres (20 feet) wide. Like the other machines from Power Curbers, it is as easy to operate as it is versatile, claims the company. Introduced at ConExpo, it is ideal for the contractor who does different types of work, including road paving or off-set applications like barrier and variable barrier, bridge parapet, ditches, and more. The machine’s flexibility means it can handle custom designs for all applications, such as tunnel work. In paving mode, the 7700 features hydraulic sides, edge overbuild, and crowning capabilities. Optional features include a tamper bar, auger or plow, and finishers. The 7700 features a fully hyd rau l ic telescopi ng frame that makes it simple to switch from paving to off-set mode, as well as the Simple Steer Track Positioning System, which aligns all four crawlers for switching modes. It is also stringless capable, so contractors can use it with 3D/GPS machine The Power Curber 7700 is ideal for the contractor who does different types of work, including road paving or controls. off-set applications like barrier and variable barrier, bridge parapet, ditches, and more. Dry Vac Rentals In paving mode, the Power Curber 7700 features hydraulic sides, edge overbuild, and crowning capabilities. Low-Profile MTV Designed for Better Visibility, Safety Thank you to North Rock Group for the picture. Equipped with Hydro-Detection System & Gas Detection Systems • Dump on Site • Up to 4x Productivity • No Water Required • Serving the GTA The New Environmental Solution with Superior High Suction Performance www.gearequip.com 416-644-3076 2219 Line 9, Bradford, ON L3Z 2A5 The MTV-1100e features a frame fabricated, welded, and assembled by Roadtec using American steel. It has a capacity of 500 tons per hour. The Roadtec MTV-1100e offers a low, machine-height profile, which is designed to keep the operator closer to the ground. The lower 3-metre (9.9-foot) machine height with a deck height of 1.88 metres (6.2 feet) is designed to provide the machine operator with a clearer view of the surroundings and the ability to more easily talk with ground crew. A dual staircase with handrails f lanks the machine allowing workers to cross the paving train without risk of being on the ground between machines. The material transfer design of the 24 ton Roadtec MTV-1100e uses triple pitch augers in the dump hopper for mild re-blending before the material moves toward the paver.  Roadtec achieves the most segregation correction possible by placing the focus in the dump hopper where the machine has the largest segment of mix to pull from. The machine design features anti-segregation technology to keep t he material in t he best condition throughout the transfer process. Sized for mass discharge from standard haul trucks, the front hopper is designed to allow trucks to unload fast. A v ibrating bottom plate in the hopper is designed to prevent material build-up. Heavy-duty, swivelling support casters under the hopper are designed to provide smooth movement. The dump hopper is controlled from the main operator platform. Hydraulically operated clean-out doors are located at each conveyor. Maintenance items such as grease points, fluid-fills, the main electrical box and DEF tank can be reached from the ground and do not require personnel to open the hood or crawl under the machine on the ground for regular checks. ������������������������������������������������������������������–������������������� ������������ P.O. Box 2140 • 3088 Riverside Drive • Timmins ON • P4N 7X8 Te�: 70��268�7600 • Fax: 70��268�7691 • E: [email protected] B8 MAY 29, 2017 EQUIPMENT // FOCUS @EQUIPJOURNAL MINING Canadian-Designed. Australian-Demo’d. Worldwide Appeal. MacLean Engineering has introduced its latest addition to the MacLean utility vehicle fleet—the LR3 Boom Lift. The company promoted the machine at the recent Canadian Institute of Mining, Metallurgy and Petroleum (CIM) Expo, April 30 - May 3 in Montreal and had also introduced it to the North American market at the 2017 Prospectors & Developers Association of Canada (PDAC) conference this past March in Toronto. The genesis of the unit was in the Australian market, where high-back mines were looking for a certified elevated work platform for installing fans, instead of using a wheel loader with specifically designed buckets/baskets to allow for people to stand inside them. “That solution didn’t get them the height and weight capacities that they wanted,” says Dan Stern, Product Manager at MacLean Engineering. “So, mines would build muck piles—hills of rock—in order to reach the heights they want, which poses greater risk. You can get those height and weight capacities with a telehandler, but no telehandler is a certified manlift, and they aren’t designed for the rough terrains of underground mining.” The mines want to reach 8 metres (26 feet) (head height when working on the machine), with the power to lift 4,500 kg (10,000 pounds). The new LR3 Boom Lift meets those capabilities, is a certified manlift, and is built rugged for rough working environments. The machine features an 8-foot-by-12-foot (2.44-metreby-4.27-metre) basket, which is interchangeable (general purpose basket, fan basket) using a quick coupler. The basket can slew +/- 30 degrees and the boom can swing +/-15 degrees. The boom lift arm offers a full range of motion, and is even able to reach the ground. The machine comes equipped with an RDS (remote drive system) that allows the operator to drive and reposition the machine while at height. MacLean Engineering also showed at CIM (and PDAC in Toronto in March), the company’s contribution to the latest era of battery electric vehicles (BEVs) in underground mining. With all-electric projects in Ontario like Goldcorp’s Borden project already under construction and Glencore’s Onaping Depth and Nickel Rim Deep projects in the project planning pipeline, the future is now and MacLean is deeply engaged in helping to move the needle on battery propulsion innovation in underground mining. The MacLean EV Series product line features a long cycle life, high density, high performing, data rich battery system, along with on-board charging and voltage adaptability for a seamless integration with mines’ existing power grids (575 V or 1,000 V). No additional charge station infrastructure is required. @EQUIPJOURNAL B9 MAY 29, 2017 Terex Trucks Outperform Competitors in Siberian Coal Mine A fleet of 10 Terex Trucks TR100 rigid haulers are outperforming the competition at an opencast operation in the heart of Russia’s mining industry—the Kuzbass. Located in south western Siberia, Kemerovo Oblast (also k now n as Kuzbass after the Kuznetsk Basin) is one of Russia’s most important industrial regions. Well-known for its long and cold winters, where temperatures can plummet to -35oC (-31oF), the province is home to some of the world’s largest deposits of coal. Selected for use by leading mining contractor Sovrenmennye Gornye Technologii (SGT), the trucks are working around the clock in an opencast environment. The machines, which each have the capacity to bear a load of 100 tons, were delivered to SGT through Terex Trucks’ official distributor in the Russian Federation, Ferronordic Machines. With an ambition to become a major supplier to the Russian mining industry, Ferronordic first started communications with SGT when the company issued a tender to enlarge its fleet w ith rigid haulers. Submitting a bid on behalf of the Scotland-based manufacturer, Ferronordic put forward a compelling argument for the Terex Trucks’ TR100’s abilities, as well as a competitive service offering. Covering a vast area of approximately 10,000 square miles, the Kuzbass coalfield was discovered in 1721, but the first mines were established in 1907. Reaching a depth of 1,800 metres (5,905 feet), the seams of the basin conta i n a nt h racite a nd steam coals. Responsible for more than 30% of Russia’s coal production, the Kuzbass has an estimated 300 billion metric tons of reserves and is the main fuel and energy base for eastern Russia. Well suited to the adverse weather conditions of the Kuzbass, the TR100 provides the perfect balance of power, effective gearing, and optimum weight d ist r ibut ion to remove overburden efficiently. The rigid dump trucks’ hydraulic disc brakes deliver better operator cont rol, wh i le the transmission retarder decreases brake wear, reducing ow nership costs and increasing machine availability. Furthermore, the air suspension bears t he load t h roug h v a r iable-rate nitrogen-over-oil type struts, which ensure a smoother ride, reduces operator fatigue, and helps boost production. The handover involved sharing k nowledge w ith operators to guarantee that SGT receives the full benefits of the machines. Since commissioning the trucks, SGT has recorded an increase in production, and noted that the Terex Trucks machines are easy to operate and outperform other brands. Terex Trucks TR100 rigid haulers at the heart of mining in Russia. 3412 Thomas St., Innisfil, Ontario JUST IN... 3-KOMATSU PC800LC-8 .......... POA REID 416-417-4997 TELEHANDLERS/MANLIFTS E Q U I P M E N T S O L U T I O N S LT D COMPACTOR Shop: 705-431-8627 Fax: 705-431-8048 2004 CAT TH340B....................................$47,000. 2004 INGERSOLL RAND UR642C .............$47,000. 2005 JCB 508C ........................................$49,000. 2006 MERLO 36.7 ....................................$55,000. 2007 MERLO 36.7 ....................................$59,000. 1998 GENIE Z60-34 .................................$19,000. [email protected] EXCAVATORS TRUCKS Call Doug Reid today! 2004 CHAMPION 8410 Superpac, padfoot 2015 JD 470G Excavator, 1000 hrs, Q/C, greaser, ..............................................................$57,000. bucket options. Factory Warranty ......... $495,000 CAT 320BLC ................................ $42,000. ATTACHMENTS CAT 215C ...............................................$30,000. HAMMERS 972 – GP.................$4,000. 1994 KOMATSU PC650LC-5, new u/c, rebuilt from 1,000 to 10,000 ft./lbs. PC400 – 48” ...........$6,000. engine, excellent condition .....................$90,000. ............................ Call JD792 – 30”, like new 3-KOMATSU PC400LC-8 .............................. CALL SHEARS – LaBounty ................................$6,000. UP40, 50, MSD70, UP90, 235 – A/B/C booms $9,000. KOMATSU PC400LC-7 ...................................POA MSD100R, MSD220 ..... Call 235 – A/B/C/ sticks .$8,000. KOMATSU PC400LC-6 ...................................POA VOLVO A35 ..................................................POA 2013 JD 250 Rock Truck, tailgate RENTAL ONLY 2011 JD 750J LP Dozer, GPS ready ..............POA (3 dozers above all have cabs and 6 ways) CAT 988B RAD, reconditioned c/w tanks. $3,000. CAT D8K.................................................$55,000. SPECIAL - STAINLESS STEEL & BUILD UP ROD DEERE 450G ..................................................POA for buckets, etc. Brand new - in the box 1,000 lb KOMATSU D37E (2004) .................................POA for ......................................................... 1/2 Price Just off service, wind & water tight, excellent condition. 20’ from .................................. $1,900 to $2,500. 40’ from .................................. $2,900 to $3,500. GRAPPLES – New PC400/ EX400/235 HD ......$16,000. BUCKETS 225 – 42”... .............$4,000. 235 – 42”, 48”, 66”, 72” from ........................$5,000. 245 – 72” HD........$10,000. FORKLIFTS 6,000 lb. CLARK .........................$10,000. 15,000 lb. CLARK, ..............................$10,000. CS7.5S6, 6000 hrs, 10kg cap. .......$100,000 US KESMAC 5000 lb. Hitchhiker ...........$29,000. FORESTRY 235 – A/B cabs w/controls ...............................$6,000. DEERE 648G skidder......................$30,000. 235 – front shovel complete CRAWLERS HYUNDAI R130, w/hyd. forestry head .. $35,000. ..............................$25,000. TJ 380, grapple & line skidder, blade .. $19,000. 2014 JD 700K LGP Dozer, 2300 hrs ....$149,000. 769B – box & hoist cylinder. ..............................$10,000. 2014 JD 700K XLT Dozer, GPS ready ............POA USED 20’ & 40’ CONTAINERS 977L – EROPS ........$5,000. 2014 JD 700K XLT Dozer, with Topcon ..........POA MISCELLANEOUS LOADERS PORTABLE CRUSHING PLANT CAT 416B TLB, 4x4, E-stick, cab w/heat $23,000. CAT 931 ............................................... $12,000. CAT 953 .................................................. $26,000. CAT 966G (2000)............................................ POA DEERE 644E ................................................... POA • McCloskey stacker w/diesel power • 100 Maktrak cone w/diesel power • Chieftain Powerscreen w/diesel power • Tri-axle jaw w/feed hopper & w/diesel power COMPLETE PACKAGE DEAL: $450,000 WANTED TO BUY KOMATSU D61 Dozer with 6 way WRECKING FOR PARTS • CAT D8H 46A• KOMATSU PC1000 • VOLVO A25 • 1996 VOLVO A35C • S24B TEREX SCRAPER s/n 27709, front diff. complete, 2 ride cyl., 2 lift cyl., 2 apron cyl.,1 dejector cyl., (3)37.5x33 tires. Value Parts is your number one choice in North America for quality new, used and rebuilt industrial equipment parts. We specialize in John Deere and Hitachi, but also have access to parts inventories for Caterpillar, Timberjack, Bomag, Ditch Witch and many more makes. The first two of the 10 rigid TR100s were assembled in just three weeks. A skilled team of engineers from both Terex Trucks and Ferronordic worked against the elements to put the haulers together. CURRENTLY WRECKING DISMANTLED JOHN DEERE 450LC 350D LC 330C LC 330LC 240D LC 270D LC 270LC 230LC 200C LC 200LC E Q U I P M E N T S E R V I C E S LT D . NEED PARTS and SERVICE for HYDRAULIC BREAKERS BTI (TELEDYNE) S COPCO ALLIED ATLA LAR CHICAGO PNEUMATIC IL CATERP O INDEC NPK ESCO 770CH 772BH 770BH 750C-II HITACHI EX200LC-5 EX270LC-5 EX330LC-5 ZX450LC-3 KENT(FURAKAWA) OKADA ROCK RAM EURORAM 2054 892E 690E 744J 744H 724J 644G 544H 544G TC44H TC54H 344J 848G 748G-III 748G-II 748G 648G 310SG 310SE 310D 772CH STANLEY ER RAMM TRAMAC AND OTHERS. We can Help... www.hydrolexc.com 416-458-2334 Fax: 905-729-4213 Deere 750C Bulldozer s/n TO750CX814595+. Cab, Final Drives, Engine, and Cylinders are all in good condition. Has multi-shank ripper (only one shank), Carco 50BPS winch and PAT 6-way dozer blade. For more information call toll free 1-877-685-4886 E-mail: [email protected] Inventory: brandt.ca eBay Store: valueparts.ca B10 MAY 29, 2017 @EQUIPJOURNAL DIESEL TRUCK PARTS INC. 1999 MACK ELITE CL713, E7-460, T2180 trans., 18 spd, Hiab 145 crane-clean, cab & hood good, 20k lbs front, 46k lbs rear, s/n XW007874, stk #229-14  CAT 416 BACKHOE, 2006 JCB 212 BACKHOE, s/n 60975304, 2006 JCB 212 BACKHOE, s/n E0947378, stk# JCB 212S BACKHOE, s/n 4ZM-5731, stk# 207-12, for parts. stk# 212-03, needs engine or for parts. 212-03, needs engine or for parts. s/n SLP212AS3E0938628, stk# 169-12, for parts. 1986/1988 JCB 1400B BACKHOE JOHN DEERE 310SJ BACKHOE, 2000 JOHN DEERE 410E BACKHOE, 2008 MANULIFT MERLO, Stk# 193-13 s/n T0310SJ171767, stk# 199-18, for parts. s/n T0410EX873597, stk# 189-03, for parts. stk# 226-02, s/n B8576079, for parts. 1987 GROVE 8440G CRANE, 40 ton, TM5300, boom dmg, Cummins power, s/n DR1SS27005DL, stk# 213-07, for parts. 1985 JOHN DEERE 750 DOZER 2003 CASE 1650 DOZER, CAT D7 DOZER, s/n 750D318355T, stk# 205-15 s/n HHA260111, stk# 201-03, for parts. s/n79204085, stk# 204-03 NEW NEW ALLIS CHALMERS HD4 1988 FIAT ALLIS FD7 MITSUBISHI BD2F DOZER, 1976 TEREX 82-20B DOZER, ALLIS CHALMERS GRADER, 1986 CHAMPION 740 GRADER, WABCO 660B GRADER, s/n SLPJS103YE0702792, stk #205-15, runs. s/n 69745 stk# 226-17, for parts.. stk# 221-02, runs. s/n 740-127-218-17239-86, stk# 215-08, runs. stk #167-07, snow wing, for parts. DYNAPAC LP 850P COMPACTOR, 1994 GOMACO GT3600 CURB & GUTTER MACHINE, s/n MC19019, stk# 200-20 for parts. 1998 CAT GENERATOR, stk# 223-15, s/n 98A-02737-S 2008 MARATHON GENERATOR, NEW HOLLAND FX38 FORAGE HARVESTER, no crank shaft, s/n WA5643980308, stk# 219-15. s/n 245230002, stk# 215-08, for parts. 2002 CASE 580 LOADER, CASE TRACK LOADER, CAT 941B CRAWLER LOADER, CLARK 1700B LOADER for parts 1976 FIAT-ALLIS 645B LOADER, s/n 011X9XL0, stk# 201-12, for parts. s/n 1020084, stk# 175-15, for parts. s/n 80H5774, stk# 206-08, for parts. stk# 218-04 s/n 16L04806, stk# 219-04, for parts. 2006 HYUNDAI HL770XD-7 LOADER, JOHN DEERE 350 CRAWLER LOADER, JOHN DEERE 544E LOADER, 1986 JOHN DEERE 644D LOADER, 1998 JOHN DEERE 744H LOADER, s/n ON0110302, stk# 205-02. for parts. stk# 221-13, for parts. stk# 165-05, for parts. s/n DW7441666040, stk# 211-04, for parts. 2002 JOHN DEERE 744H LOADER, 2005 JOHN DEERE 755C CRAWLER LOADER, 2003 KOMATSU WA380-5L LOADER, KOMATSU WA-75 LOADER, TEREX 72-51 LOADER, s/n JD744HX580607, stk# 219-18, for parts. Series II, s/n LU755CX007255. stk # 194-05. s/n A52038, stk# 207-18, for parts. s/n 21499, stk# 218-03, for parts. s/n 9260898, stk# 218-04, for parts. TEREX 72-51B LOADER, TEREX 7231 LOADER, VOLVO L150E LOADER, 2008 ASV POSI-TRACK RC-100 SKID STEER, s/n 9260848, stk# 218-04, for parts. stk# 218-04, quick attachment, runs. s/n L150EV9166, stk# 195-09, for parts. s/n RSD03398, stk# 219-04. 1988 JOHN DEERE 7720 COMBINE, s/n 48500188, stk# 195-10, runs. s/n H07720X630650, stk# 228-07, for parts. @EQUIPJOURNAL B11 MAY 29, 2017 1248 MCADOO’S LANE, R.R. #1 GLENBURNIE (KINGSTON), ON, CANADA K0H 1S0 BUSINESS HRS. Mon. to Fri. 8 a.m. to 5 p.m. Closed Saturday & Sunday Call James 1-800-267-0633 (613) 546-0431 Fax: (613) 546-4206 www.morgansdiesel.com • [email protected] We ship parts anywhere F.O.B Kingston, ON We also buy salvaged equipment. WE ACCEPT CASH & BANK DRAFT NON CASH PURCHASE SUBJECT TO 3% INCREASE Check out our NEW website - easy to search for parts CAN AMERICAN Soil-King STONE SPREADER TEREX 3066C ROCK TRUCK, AMERICAN HOIST FORK LIFT 1624, MITSUBISHI FORK LIFT, stk# 203-19 stk# 219-19, for parts. s/n 31035N, stk# 207-13, for parts. s/n 868811, stk # 193-16 for parts. SELLICK FORK LIFT, 2007 CASE CX225SR EXCAVATOR, s/n 336001502, stk# 195-02, for parts. s/n DAC857387, stk# 204-12, for parts. CASE 220B EXCAVATOR, CAT 235B EXCAVATOR, s/n 220059674529, stk# 193-20, for parts. s/n 9PC00448, stk #123-08, for parts. CAT 330BL EXCAVATOR, 2012 DOOSAN DX 225LC EXCAVATOR, s/n 060R0393, stk #209-20, for parts. s/n B0006801, stk# 221-12, for parts. HITACHI EX300LC EXCAVATOR, electronic load sensing sys., burnt, s/n 1SL7493, stk# 222-04, parts. 1993 KOMATSU PC220LC, s/n 380137. Our forty acre site is accessible via the 401 Highway at Kingston, Ontario, just north of the CanadaUS Border. We are located mid way between Montreal and Toronto and we are serviced by all major North American freight companies. NEW 2000 CASE 9050B EXCAVATOR, 1997 CASE EXCAVATOR, stk# 199-11, for parts. s/n# JEE0040320, for parts. 2006 CAT 314 CCR FELLER BUNCHER, 2002 CAT 320CL EXCAVATOR, s/n KJA00198, stk# 194-12, for parts. s/n ANB01237, stk# 165-11, for parts. HITACHI UX60 EXCAVATOR, 1999 HITACHI EX200LC EXCAVATOR 1996 HITACHI EX270LC EXCAVATOR, stk#222-12, for parts. s/n 14C798, stk# 205-03 s/n 158-7515, stk# 161-21, for parts. 1994 HITACHI EX400LC-3 EXCAVATOR, stk# 223-13, s/n 166-5183, for parts. HYUNDAI EXCAVATOR, 2001 HYUNDAI 180LC EXCAVATOR, 2001 JCB JS160 NL EXCAVATOR, stk# 203-16, for parts. s/n El01FI10442, stk# 228-15, for parts. s/n E0702792, stk# 214-15, for parts. 1998 JOHN DEERE 653E FELLER BUNCHER, 2001 JOHN DEERE FELLER BUNCHER, 2005 JOHN DEERE 50D MINI-EXCAVATOR, 2008 JOHN DEERE 200D LC EXCAVATOR, s/n T0653EX843343, stk# 181-21, for parts. s/n10310028X, stk# 229-13 s/n 244178, stock# 206-13, for parts. stk #193-08, for parts. 1998 JOHN DEERE 690 ELC EXCAVATOR, 1998 JOHN DEERE 790 ELC EXCAVATOR, 1985 JOHN DEERE 792 EXCAVATOR, JOHN DEERE 892 ELC EXCAVATOR, 2008 KOBELCO ED195 EXCAVATOR, s/n EL543215, stk# 221-14, for parts. s/n EX015659, stk# 221-11, for parts. s/n CKO792-L000814, stk# 193-15, for parts. s/n FF892EX012040, stk#227-22, for parts. s/n YL04U0322, stk# 205-01, for parts. 2000 KOBELCO SK 210 LC EXCAVATOR, KOMATSU PC200LC-5 EXCAVATOR, 1993 KOMATSU PC220LC, s/n 7DF00927, 2006 LIEBHERR 904 EXCAVATOR, 1995 LIEBHERR 912 LITRONIC EXCAVATOR, s/n Y007U0352, stk# 161-04, for parts. s/n 48079, for parts. for parts s/n WLHZ0441K2K027586, stk# 198-16, for parts. s/n X346-0665, stk# 219-18, for parts. 2 LINK-BELT 225 SPIN ACE, 2003 NEW HOLLAND EC215 EXCAVATOR, 2010 VOLVO EC160CL, 2,400 hours, stk #231-09. VOLVO EC210CL EXCAVATOR, 2004 VOLVO EW170 EXCAVATOR, s/n ECAJ37193 & ECAJ50477, stk#229-20 & 21 s/n 721645, stk#221-14, for parts. s/n VCEC160CH00120768 s/n 00110257, stk# 201-04, for parts. s/n EW170C03543, stk# 167-05. 1990 CAT EL200B, s/n 7DF00927, for parts B12 MAY 29, 2017 @EQUIPJOURNAL Hitachi Mines for Gold in Southwestern Quebec In the Abitibi region of northwestern Quebec, a Hitachi EX5600-6 is helping one of the largest operating gold mines in Canada achieve its production goals. In operation since June 2016, the machine is the mine’s first Hitachi excavator, and is proving to be a pivotal asset in its daily operations. “The open pit is right above underground mines, so there are many cavities we need to work around,” said Éric Lecomte, Mine Operations Director of Canadian Malartic Mine.“As a result, we operate machines remotely in those areas; it’s really a matter of health and safety. We had a smaller, diesel shovel that was operated remotely, but we wanted to improve production, so we decided to add the Hitachi machine to enhance productivity.” Though the EX5600-6 has only been in production for a short time, Lecomte and his team have been pleased with its performance so far. “The first time our oper- ators used the machine, they were very impressed with the power of the EX5600, especially compared to the older machine we had been using up until then,” said Lecomte. “We have achieved some good performance and reliability has been great. We are impressed and very satisfied.” Prior to making the decision to purchas e the EX5600-6, Lecomte and his team visited other open pit mines to see the machine in operation. “We spoke to the maintenance guys and operation guys and heard some good things,” he said. “Overall, we had some good references from our colleagues in the mining industry.” The Canadian Malartic operation was built by Osisko Mining Corp., which was jointly acquired in June 2014 by Agnico Eagle Mines Limited and Yamana Gold Corporation. Canadian Malartic Mine is serviced by Wajax Equip- Prior to making the decision to purchase the EX5600-6, Lecomte and his ment, Timmins, Ontario. team visited other open pit mines to see the machine in operation. Application-Specific Data & Advanced Analytics Improve Cutting in Underground Mines Joy Globa l is helpi ng mines cut cutting costs and improve cutting performance and efficiency through the company’s JoyCut program. “Global mining companies are challenged more and more today to be viable in ever more tough market conditions; they are putting more emphasis on the costs of their operations,” says Dirk van Dyk, Global Product Director, Joy Global. “This is a global t rend t hat is ev ident in most underground mining operations—not just coal, but also most other commodities, such as potash, gypsum, and salt.” Joy Cut is a n integ rated cutting system that is d e s i g ne d f or m i n i n g ’s toughest cutting challenges. Developed by Joy Global, JoyCut is designed to improve the performance of the underground mining system by improving the cutting executed by machines that use a drum for cutting, such as a continuous miner (CM) or shearer. “The cutting system is an important sub-system of the mechanized mining system [such as the CM or shearer], and it is integrated to the extent that it can impact your productivity and efficiency of the overall underground mechanized mining system,” says van Dyk. The JoyCut program has four parts: environment, application, advanced design, and JoySmart. During the first part—environment—the company examines the following factors: safety, cost, particle size, specific energy, pick life, reliability, and frictional ignition. Then Joy Global performs an on-site analysis (application), so that the company can understand the challenges, and develop an accurate problem statement. Advanced design refers to the work performed at the company’s in-house lab and the engineered solutions created there. JoySmart is when the application-specific data and advanced analy tics comes into play. Essentially, Joy Global b e n c h m a r k s a m i n e ’s current design by taking specif ic measurements, such as specif ic energ y, sump and shear rates, power consumption, etc., and then they input their solution and then remeasure. Aaron Lafferre, Global P r o d u c t M a n a g e r, Jo y Global, shares an example of how the JoyCut program benef ited one polyha lite mine. “Their problem statement was they were struggling to economically mine polyhalite; they were tearing up their drums, tearing up the machine, had a high pick consumption, and low productivity. They were grinding [instead of cutting] material, meaning small particle sizes, lots of fines and dust, and lots of waste.” Then, the company conducted four tests. “With the LCTR test, we can look at what the pick life should be, what is the best attack angle, and at parallel cuts to understand how the cracks propagate between that and the core to see what the proper pick spacing should be. We take a sample from the mine, and use different picks, pick spacing, cutting angles, and cutting widths, and measure the specific energy.” Specific energy is a direct measure of the penetration of a cutting system. Better penetration means better product sizes; larger pieces means less surface, which means less fines and dust. Joy Global identified that the polyhalite mine needed to lower the specific energy in order to improve performance. Then, Joy Global cond uc t e d J&W t e s t i n g , a Loadmaster α100 • Scale for wheeled, telescopic and tractor type loaders • 7” colour touch screen • Suitable for use with up to 10 different attachments • Optional backup camera Since 1987 1-800-363-8727 www.innotag.com cool operators can do it all day long. [email protected] proprietar y test used to measure the cuttability and wear properties of the cut material. “Schmidt Hammer testing of polyhalite compressive strength allows us to go on site and take measurements of the product in situ, draw that back, and compare it to what we are seeing in the lab, so we tie it closer to the application,” says Lafferre. And lastly, on-site application inspection. “One of t he t hings we measured is tons per pick,” says Lafferre. “In our solutions, we offered a pick that is sharper and smaller in carbide diameter, which seems cou nter i nt u it ive when you are trying to increase pick life, however, this gave better penetration. The pick shape and highgrade carbide led to 109% decrease in pick use. And, our overall solutions led to a 20% increase in productivity in sump and shear rates.” Also, the new design led to a 9% decrease in sump power and a 5% decrease in shear power, which translates into a lower specific energy. So, changing the pick not only increased pick life, but got better penetration and product size while lowering the specific energy and getting less dust and fines. T he Jo y C u t pr o g r a m can be used on Joy Global branded machines as well as competitive machines, and the program has already been put to use in mines in Canada, US, South Africa, and Australia. Why let heat, dust and poor air conditions ruin a perfectly good production schedule? With factory-style aftermarket AC from Arctic Wolf™, you can count on a full day’s work no matter what the day is like outside. If your equipment has an engine and a cab on it, we can put cool, clean air into it ... no sweat. Call today 1-800 2 MR COOL or visit www.hammondac.com @EQUIPJOURNAL MAY 29, 2017 B13 Artisan Launches the 153 in Canada In the heart of the Sudbury basin, Artisan hosted an invitation-only event for the unveiling of its cutting edge zero emissions 153 threemetric-ton loader before its all-important ramp test at Vale Tuesday (which the 153 passed successfully on all criteria) before the delivery to Kirkland Lake Gold. Leaders throughout the m i n i ng i ndust r y representing a dozen mining companies joined Artisan to discuss not only the 153, but also what conversion to battery powered vehicles means to the underground mining industry. “We all know the impact that this technology is having on the industry and we need to get smart about it quickly. Artisan is known as the leader, and we are here to see their new machine and to ask questions about the implementation of battery technology at our mine site” said Dick DeStefano, Director of SAMSSA. In addit ion to mining executives and government representatives (including Sudbury Mayor Brian Bigger), the latest buyer of two 153’s was also present. “We at KL Gold are proud of our leadership in the transformation to battery power and our long standing strategic partnership with Artisan” said John Labine, Kirkland Lake Gold’s Procurement Manager. “153 testing is showing strong results and we are anxious to get our units into full time production use to prove their value over diesel in our Macassa operation.” The event was held in Sudbury at Science North. A fitting location for a discussion about innovation. “Sudbury is well-known for leading-edge technology, innovation, and creativity throughout the world,” said Artisan’s Mike Mayhew. “We are proud of our new machine and honoured to introduce it to so many respected and experienced mining professionals.” In addition to Mike Mayhew, Mike Kasaba (Artisan’s CEO) and Brian Huff (CTO) were in attendance and talked about the company’s vision and its approach to the market. “My goal this evening is to listen” said Mike Kasaba. “The collect- ive experience in this room tonight is overwhelming and priceless. We can learn so much about how to improve mining operations from this amazing group of people. I can’t wait to incorporate many of their ideas into our current and future products.” Artisan has designed the 153 around its cutting-edge electric powertrain, battery, and advanced operator control system. The 153, with its streamlined modernized design, is smaller in all di- mensions than a comparable diesel loader, but has 300% of the power. It loads quicker, hauls up steep grades faster, and is more precise and responsive to operator commands, claims the company. 416-801-6014 www.LundAppraisals.ca [email protected] CPPAG Accredited - USPAP Compliant 2016/17 “...power is always there when you need it.” Bobcat of Toronto Carlos Burgos, owner of Carval Contracting Inc., takes a minute out of building a customers dream backyard to take a picture with Bobcat Sales Specialist Gino Cervo from Bobcat of Toronto. Artisan Vehicle Systems launches the 153 at Sudbury’s Science North, home of the Nickel Capital of the World. PUBLIC AUCTION NATIONAL VACUUM & Carval Contracting Inc. has been serving the GTA & surrounding areas since 1999. They are a one stop shop design and build company from start to finish. From building custom homes/ renovations, from excavating to retailing walls, interlock, and installing pools. Carval Contracting Inc. team of trained professionals provide top quality work and service in building your dream home and/or dream backyard. Carval Contracting takes great pride in their work and that shows with their growing list of referrals and repeat customers. Also, staying within budget and on time for their customers is extremely important to them. Carlos Burgos said the #1 reason why he chose to purchase Bobcat® machines was the service Bobcat of Toronto provided. When he first started looking, he walked into another brand dealership, they didn’t give them the time of day because he was young. From the minute he walked into Bobcat of Toronto dealership, they were all very welcoming to him and Gino Cervo, Bobcat Sales Specialist, continues to provide Carlos with top notch service. “Gino Cervo explained what machines would work best for my business so bought a Bobcat MT85 mini loader, T650 compact track loader and a E85 compact excavator. I am so glad I did purchase these machines. They are compact, have great response and power is always there when you need it. My employees find them easy to operate and everything is straight forward on the dash. As for the cost of machines, it’s money well spent. Actually, I am just in the middle of purchasing a bigger machine from Gino,” stated Carlos. “I would highly recommend Gino Cervo, Bobcat of Toronto and Bobcat machines and attachments to anyone.” Thanks Carlos. 0% APR for up to 48 months* OR In lieu of financing rebates up to $5,200* CAD on a new Bobcat compact excavator from participating dealers in Canada. *Offer ends June 30, 2017. Some restrictions apply. With approved credit. See participating dealers for details and other offers on other Bobcat machines. ONSITE & ONLINE Tuesday, June 20 • 1:00 P.M. EDT Montreal, Quebec, Canada Your local authorized Bobcat dealers INSPECTION: Monday, June 19 from 9AM to 5PM and morning of auction. LATE MODEL INDUSTRIAL VACUUM SERVICES COMPANY FEATURING: STERLING (2007) LT7500, industrial vacuum truck; INTERNATIONAL (2005) 7600, industrial vacuum truck with SUPER VAC 2660 CFM system; STERLING (2003) LT7501, industrial vacuum truck with SUPER VAC 3500 CFM system; GMC (2000) C6500, industrial vacuum truck; MITSUBISHI (2007) FE145, 12’ flatbed truck; EATON (2010) sheathing trailer; UNITED EXPRESS LINE (2009) 16’ enclosed dual axle trailer; FORD (2005) E450 SUPER DUTY, service cube van; FORD (2003) F550 XL SUPER DUTY, truck with enclosed box; FORD (2006) F150 XL, 4x4 pickup truck; FORD (2004) E450 SUPER DUTY, service cube van; (2) MANAC & FRUEHAUF 53’ enclosed trailers; MFG UNKOWN 2 axle gooseneck flatbed trailer; TCM 5000 LB capacity outdoor forklift, ARTISANALE (2008) solar powered sign trailer, support equipment & MUCH MORE! BARRIE Bobcat of Barrie 1-888-637-RENT 705-726-2228 BRANTFORD Bobcat of Brantford 519-752-7900 bobcatofbrantford.com CASSELMAN Casselman Farm Equip Ltd. 613-764-2033 1-877-244-5593 CORNWALL Bobcat of Cornwall 613-932-2034 1-877-840-4182 COURTICE Bobcat of Durham East Ltd. 905-404-9990 FRANKFORD John’s Equipment 613-398-6522 Fax: 613-398-0072 HAMILTON Bobcat of Hamilton 905-643-3177 Fax: 905-643-1798 KITCHENER Bobcat of the TriCities Ltd. 1-866-214-3939 bobcatoflondon.ca OTTAWA Bobcat of Ottawa 613-745-5775 Fax: 613-745-3341 PARRY SOUND Bobcat of Parry Sound Ltd. 705-342-1717 STRATTON Stratton Equipment 807-483-5505 Fax: 807-483-5881 SUDBURY McDowell B Equipment Ltd. 705-566-8190 Fax: 705-566-6401 TORONTO Bobcat of Toronto 416-679-4172 1-866-207-8406 bobcatbarrie.com bobcatofdurhameast.com LONDON Bobcat of London 519-455-4900 THIS IS A PARTIAL LISTING ONLY! VISIT OUR WEBSITE FOR MORE! www.corpassets.com • 416.962.9600 • [email protected] bmcdowell.com bobcat.casselmanfarmequip.com bobcatofcornwall.com bobcat.johnsequipmentsales.com bobcatofhamilton.com bobcatofottawa.com bobcattoronto.com bobcatofparrysound.com bobcatoftc.com strattonequipment.com B14 MAY 29, 2017 @EQUIPJOURNAL ON THE MOVE TEREX UTILITIES APPOINTS CLINT WEBER AS NEW VICE PRESIDENT AND GENERAL MANAGER Terex Utilities is pleased to announce the appointment of C l i nt Weber to Vice President and General Manager. In this role, C l i nt w i l l h ave over a l l responsibility for leading the worldwide Terex Utilities business. Weber joined Terex in 2006, and most recently held the position of Vice President/General Manager of the Aerial Work Platforms (AWP) business in Greater China. While there, Weber was instrumental in driving acceptance and market g row t h for Aer ia l Work Platforms while increasing production volumes a nd bu si nes s per for mance. Prior to that, he held a variety of leadership roles within the AWP business based in Redmond, Washington. “We a re ver y plea sed to welcome Clint to t he Utilities team,” said Steve Filipov, President, Terex Cranes. “Terex Utilities is an important part of Terex and Clint will continue to lead the business focusing on listening, responding, and delivering innovative solutions with speed to our customers.” Clint will be based from the Terex Utilities facilities in Watertown, South Dakota. KOBELCO USA EXPANDS DEDICATION TO SPECIALIZED MACHINERY MARKETS Kobelco Const r uct ion Machinery USA continues to add to its staff of experts with the addition of David D on ner a l , Sp e c i a l i z e d Machinery Sales Manager. Donneral joins the Kobelco USA team in the company’s drive to expand its commitment to the demolition, scrap and forestry markets. In h is new role, Donneral will be responsible for understanding the demand for specialty-built excavators in North America and identifying opportunities for Kobelco machinery to fulfill market needs. Donneral will research the need for specialized machinery and gain insight from customers and attachment manufacturers to develop machine enhancements. SINCE 1962 FLEXIBLE PLOW BLADE SYSTEMS All common types and configurations of systems are in stock NOW. ECO NEW HIRES, APPOINTMENTS & OTHER STAFF CHANGES He w ill also continue to expand Kobelco’s distribution locations through dealer recruitment, implement proper training for Kobelco dealers on specialized machiner y, and market specialty models at tradeshows. “The scrap, demolition, and forestry markets are growing parts of our business,” says Randy Hall, Vice President of Operations at Kobelco USA. “Kobelco is a reputable manufacturer of specialty excavators in other world markets and adding David to the USA team allows us to expand our dedication in Nort h America. David displays motivation, passion for the indust r y, a nd ex tensive experience, all of which are vital characteristics in enhancing Kobelco USA’s spec ia l i z ed mach i ner y offerings to meet market needs.” LONGUS APPOINTS NEW J.R. BRISSON PARTS AND SERVICE MANAGER The President and General Manager of the Longus Group is pleased to a nnounce the appointment of Paul Germain as Parts and Service Manager for the six Longus Group locations. Germain’s mandate is to harmonize the parts and ser v ice depa r t ment s of the four Longus locations (Laval, Lévis, Sherbrooke and Varennes) as well as the two J.R. Brisson locations (Ottawa and Vars, Ontario) to ensure a better efficiency. Germain has a solid background in parts and service management. He has spent the past nine years serving as New Holland Parts and Service Sales Manager for Eastern Canada. INDEPENDENT EQUIPMENT DEALERS ASSOCIATION NAMES NEW PRESIDENT AND FOUR TO BOARD OF DIRECTORS The Independent Equipment Dealers Association (IEDA) welcomes incoming  President Kev in Fox w it h Dew it t Equ ipment Co., i n Ba r r ie, Onta r io, and new Board Members Luke Brenner with Heavy Equipment Co. in Austin, Texas, Kenneth Tysinger with May Heavy Equipment in Lexington, North Carolina; and Chris Lohman with South Mountain Tractor in Tempe, Arizona, as well as Treasurer, Kristin Waldie, BBA with CapStone Accounting in Minesing, Ontario.  IEDA’s new P resident and board members were announced during the Association’s Annual Meeting and Vendor Ex po in Orlando, Florida, this past February. Members of the IEDA Board of Directors serve a maximum of two consecutive years and are responsible for establishing industry best practices and qualit y used equipment standards. Outgoing Board Members include Dav id Williams NOF ECO LEX RETIREMENT AUCTION SALE NOF SATURDAY, June 17h 10:00 a.m. Preview 9:00 a.m. For Bud Mervyn Construction Ltd Of Owen Sound LEX- M (West of Rockford to Conc Rd 3 – Turn South 2.5 km Fire #217422) Watch For Signs Consisting Of Trucks, Trailers, Excavating Equipment Instruments-Tools-Shop-Misc Visit our web site for details TERMS: Cash or Known Cheque Or Personal/Company Cheque Accompanied by An Irrevocable Letter of Guarantee from Bank Contact Auctioneers For Payment Details Verbal Announcements Take Precedence Over Written Ads 1-800-461-1824 VALLEYBLADES.COM Ontario- Waterloo, Barrie, Ottawa Alberta - Edmonton Auctioneer: Jerry Ruth, C.P.P.A Assoc Auctioneer: Durk DeVries Phone 519-935-3156 or 270-9778 www.sure-bid.ca [email protected] from International Construction Equipment (ICE), Lakewood Ranch, Florida; Tanna Trout from Trout Machiner y, Inc., Casper, Wyoming; Rick Trout from Trout Mac h i ner y, I nc ., Casper, Wyom i ng ; Bu r t Cunningham from Global Tractor Company, Colleyville, Texas; and Maurice Matson with Matson Machiner y Company, Scott D e p o t , We s t V i r g i n i a . During the Annual Meeting, all four retiring Board Members were presented with the IEDA Leadership Award, which is given to outgoing Board Members annually for their contribution to the organization. BERGKAMP ANNOUNCES JIMMY KENDRICK AS DIRECTOR OF CONTRACTOR SALES Bergkamp Inc., based in Salina, Kansas, announces the promotion of Jimmy Kend r ick to Di rector of Contractor Sales. Kendrick initially joined Bergkamp as North American Territory Manager in Februar y 2016. Over the previous decade, his career experience had been spent in management-level positions with asphalt and construction contracting companies. In his new role, Kendrick will be responsible for overseeing field sales, inside sales efforts, and customer service with Bergkamp’s contractor customers. Kend r ick holds Bachelor’s and Master’s degrees in business administration, general management, and construction management. He is an avid believer in industry association participation. For example, Kend r ic k presented on micro surfacing and slurry applications at the January 2017 ISSA (International Slurr y Surfacing Association) Workshop, and was recently elected Board Secretary of WRAPP (Western Reg iona l Associat ion of Pavement Preser vat ion, for merl y k now n a s t he California Chip Seal Association). “Jimmy has proven himself in his ability to draw from his own contracting background in recognizing our customers’ needs,” says Bill Cooper, Executive Vice President/COO for Bergkamp. “His experience in management and customer relations, along with his enthusiasm for industr y association participation, make him an excellent fit for us.” @EQUIPJOURNAL MAY 29, 2017 Unreserved public equipment auctions 63 0+ 17 5+ WH EE LL OA DE RS MO TO RG RA DE RS 71 5+ HY DR AU LIC EX CA VA TO RS Fast, flexible financing available – up to 100%, $0 down Volvo G720B | Brandon 2012 Hyundai HL780-9 | Brandon 2012 Caterpillar D6T XW | Edmonton 2 – 2013 Hitachi ZX210LC-5B | Edmonton 2013 Komatsu WA500-7 | Edmonton 2008 Case 865 | Truro 2014 Case CX160C | Truro John Deere 544H | Truro 4 of 5 – Caterpillar 631G | Grande Prairie Caterpillar D8T | Grande Prairie MO TO RS CR AP ER S 75 + CR AW LE RT RA CT OR S 38 0+ 2012 John Deere 250G LC | Brandon Komatsu PC600LC-8 | Edmonton 49,100+ items in 125+ auctions including Brandon, MB Thunder Bay, ON Edmonton, AB Truro, NS Saskatoon, SK Grande Prairie, AB Jun 1 Jun 7 Jun 13–14 Jun 21 Jun 26 Jun 28–29 Bid in person or online ▸ No minimum bids or reserve prices ▸ Test and inspect on-site ▸ Open to the public, free registration Financing & leasing available Up to 100% financing, with no money down. More items added daily Call about selling: 1.800.211.3983 See full auction & equipment listings at rbauction.com Auction Company License #303043, Auction Company License #309645, MV Dealer No. 4585592 OAC. Terms & conditions apply. See rbauction.com/financing. B15 B16 MAY 29, 2017 @EQUIPJOURNAL Not Ready to Buy? No Worries... Rent to Buy Never Made More Sense! CAT D6N LGP (12) EROPS, CARCO 50 WINCH, SWEEPS, 3816 HRS. DEERE 750K XLT (14) EROPS, PAT, TOPCON READY, 955 HOURS. $235,000 DEERE 700K LGP (13) VPAT, CARCO WINCH, 30" PADS, 2261 HOURS. $165,000 CAT 314DLCR (11) TIER 3 EPA, BLADE, AUX. HYD., Q/C, 3,279 HOURS, GOOD CONDITION. $140,000 CAT D6TLGP (12) VPAT, RIPPER, 50% U/C, 6,294 HOURS. CAT 321DLCR (08) LONG/STICK, Q/C, 2 BKTS, AUX. HYD. $110,000 SULLAIR 1600H (99) CAT POWER, 7635 HOURS. LINK BELT 250X3LF (13) 60" REACH. CASE 550HLT (05) ROPS, 2,338 HOURS, PAT, GOOD U/C. $35,000 $29,500 $250,000 FOR RENT ONLY CAT D7E (10) EROPS, 7SU, CAT RIPPER, 4991 HOURS. $275,000 VOLVO A40F (12) TAILGATE, HEATED BOX, 4414/5259 HOURS, 2 AVAILABLE. FOR RENT OR SALE CAT 336EL (11) LONG STICK, Q/C, 6,232 HOURS, AUX. HYD, SALE PENDING. $179,000 FIRM CELEBRATING OUR 71st YEAR CAT CS66B (16) 130 HOURS, EROPS, A/C, C/W PADFOOT DRUM KIT. $185,000 Since 1946 Evan Tzaras [email protected] 416-236-5425 | After Hours: (416) 720-6280 (416) 930-6757 Daryl MacLennan [email protected] hubequipment.com