Congratulations On Your Purchase Steamvac

Transcript

® Widepath The Easy TM to Use Cleaner Deep Congratulations SteamVac TM on your purchase Widepath brushes that deep bare floor!! cleaners clean carpets have 6 rotating and scrub LS MODEL SteamVac by www, hoover, TM applying co Widepath hot m tap Deep water Cleaner and cleaning cleans carpet solution. fibers Fill in Retain and This HOOVER deep cleaner designed for deep cleaning is carpet, For your personal records, please enter the COMPLETE model and serial numbers in the spaces provided and retain this information. deep cleaner s Review this deep Hoover of date of purchase for warranty service may of product. Index Important safeguards .......... Assembly ................... Carton contents .............. How to use .................. Agitator speed selector ....... Automatic "shut-off". ......... 2 4-5 3 6-8 7 7 Deep cleaner description ...... 6 Emptying the recovery tank .... 8 Filling the clean solution tank. 7-8 How to clean After cleaning ............... 9 Before you begin ............ 9 Carpet cleaning ............. 10 Cleaning bare floors ...... 10-11 Clean Surge TMFeature ........ 10 Picking up spills ............ 10 Using the tools ............. 11 Attaching tools ............ 11 Cleaning carpeted stairs ..... 12 Cleaning upholstery ....... 13 Scrub module .............. 11 Maintenance Headlight replacement If you have a problem Lubrication ................ Service ................... ....... ........ Storage ................... Warranty .................... Safeguards! using an electrical appliance, always follow precaution, including the following: 13 14 14 15 14 15 (_)1993,1999,2001 The Hoover Company www.hoover.com ALL INSTRUCTIONS BEFORE WARNING: USING basic APPLI- To reduce the risk of fire, shock, or injury: electric • • Use indoors only. Use only on surfaces not immerse product. • • Connect to a properly grounded Do not clean over floor electrical • Do not • • • • Use extra care when cleaning on stairs. Do not place deep cleaner on stairs. Use deep cleaner only for its intended use as described in the instructions. Use only attachments recommended byThe Hoover Company; others may cause hazards. The use of an extension cord is not recommended. If an extension cord is • absolutely necessary, grounding type plug Unplug deep cleaner • • • Unplug before connecting the powered hand tool. Always disconnect cord from electrical outlet before servicing the deep cleaner. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. • • Never handle plug or appliance with wet hands. Do not pull or carry by cord, use cord as a handle, close door on cord or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces. • Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer. • Close supervision is necessary when any appliance is used by or near children. Do not allow deep cleaner to be used as a toy or to run unattended any time. Do not point tools toward people or pets. • • • use without moistened tanks by the cleaning outlet only. outlets. process or small See "Grounding spills. Do Instructions". in place. use at least a 16 gauge 3-wire cord and a 3-pole receptacle that accepts when not in use. Turn off all controls which has a 3-prong the machine plug. before unplugging. Use only commercially available floor cleaners intended for machine application. Do not use any type of wax with deep cleaner. To assist In reducing drying time, be certain the area is well ventilated using detergents and other cleaners with this machine. Keep detergents and other cleaners out of children's reach. Do not use to pick up flammable or combustible liquids such use in areas where they may be present. • Do not pick up chlorine bleach, drain cleaner, gasoline or any other toxic material with this appliance. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes. • • Avoid picking the machine. • Keep hair, up hard, loose clothing, sharp objects fingers, feet with and the deep all parts as gasoline cleaner.They may of body from away or damage • openings and moving parts. Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow. To help prevent matting and resoiling, avoid contact with carpets until they • dry. Keep children and pets away from carpets until they are completely Store in a dry place. Do not expose machine to freezing temperatures. Save these instructions! at when • • • 2 cleaner Important number It is suggested that you attach your sales receipt to this owner s manual. your before is model READ Verification be required manual operating When and has serial ENGLISH -_ pp. 1-15 ESPANOL-_ pag. 16-25 FRAN(_AIS -_ p. 26-34 Manual rugs, carpeted stairs and upholstery. The model and serial numbers are located on the data label on the back of the handle. Your t Owner dry. are Grounding Instructions A 0© © DANGER- C Improper This appliance should must tance risk or provides for of a cord plugged is to appliance into an properly (A). (C) The plug appropriate with all is properly will not (B) appliance in ordinances. Carton fit to whether the circuit looks the outlet, a is that Do with by volt sketch service grounded. provided installed and as and like equipment- has the a the not if you outlet is modity a the proper electrician. on a a nominal grounding plug only (B) lug, or ground outlet grounded the 120 Canada, is not is a the properly of a a E C F temporary Canadian Codei G D K A Unpack deep parts shown. cleaner Remove from the carton and identify and dispose of the packing. A. B. Deep cleaner Upper handle Upper handle scrub module* C. D. I=1 F. Bolts (2) Nuts (3 - one extra included) Carpet/Upholstery Detergent Bare Floor Cleaner* G. H. PreCleaner Bare floor with with powered powered Spray* attachment* hand hand tool tool the I. J. K. OR and Hose holder Crevice tool* Nozzle cleanout-tool* Contained L Hose (some have 2 bottles) in carton with hose: M. Stair/upholstery nozzle N. Tool holder and screw (taped *Included with some models on rack under be NOTE: contents I a perma- Whenever it must the ear, the properly coveri screwi not rigid from to as box by is a qualified connected such to should colored used, use used grounded by extending metal permitted Electrical (A). be be receptacle outlet installed (E) outlet by may 2-pole adapter green (G) adapter place in like must nent a be The the a temporary until can electrician. This plug illustrated used outlet to grounded The adapter = i[ it plug if a properly be qual= (D) adapter this availablei in with person have use the result appliance qualified for (E) the Check or temporary connect can shock. doubt be grounded codes in plug and must and local are of conductor electric electrician the equip- outlet installed accordance an of ified resis- reduce having conductor plug least connection grounding risk of This shock. ment-grounding grounding path current with Ifit grounded. breakdown, a electrical electric equipped that be malfunction grounding A nozzle) held in In adapter Theassembled drawing cleaner (hS model will look like this handle Assemble shown). IIII A1 A2 I Attach upper Remove from clean deep handle solution tank (upper tank) Gleaner. With hose back of down (A1) hook deep onto and Gleaner, lower holes on front cord push handle. hook (A2) upper Push bolts of handle. If bolts to handle into will not go through hole easily handle is not pushed completely down. Attach Position hose hose holder tabs of bolts are nuts handle. matching back Place holder handle. on (B) rack onto with Make sure handle openings holes by on for tightening front in recessed Hold each each of the areas nut bolt with a while depress Clean upper handle. on model. You will hear a "snap"when ger rod is in place. the driver. The been two nuts extra nut provided are is needed not for required your When handle sections are completely together, squeeze trigger (C) and screw (from aligned. Only of Phillips securely handle) back on in place this but Surge TM Button* (D) on the trig- has _some convenience. models E Replace by clean solution positioning tank place. handle tank bottom to snap first. top of (upper Press tank tank) Attach into Remove holder. Insert 4 tool holder on back tool and projections of cleaner. taped on holder screw into from slots Slide rack down at and tighten (E) driver. on into with place. a Insert Phillips screw screw- Ill II |1 A2 Press cord handle. into Pull around cord cord crevice models on and back Storing of wrap Store holder (some base as shown of nozzle cleaner at and snap in into holder it into front holder section of as of bare models clip by first Powered attachment into holder and remove snap shown. outward. reposition the hand tool place (I), bag pull it How to reattach tool cover tool, reverse this proce- The tool cover is designed away remove it at the To the sides reposition age area Push scrub and module* pull module holes to snap grasp if it it forward. module, into (J), fit on tabs back it securely To in of the with LS only model some models, holes into storage is pushed reattach, which allows with a open align too hinges it to break- snap on on sides of tool free far. of cover stor- module. position. *included feature storage area. with under end fully hand powered plastic dure. To The ing powered and hose hose lower into hold- er clip. floor only) wrapping (F). Snap (G). Ensure that the hose end is pushed down completely into holder (G). positioning I down To Continue (_x tools arrow. m To on end (some stair/upholstery at in Insert only). Position hose hose (H) into tool hose hook cord (A2). hooks Slide clip tight bag before tool door. hand for using tool tool protection. the is shipped Remove tool by first in the open- a Deep Cleaner The Description hS 2_ 8 will look clean 3. 4. Clean Hose Surge 5. Hose holder: wrap around and The top right or easy cord for hose top the of wrap for hook can left for storage. be solution solution. raise tank handle to removal; forward the tank: lock on both sides hood cleaning to for edges of carpet. either floor or tool usage 22. ON/OFF pedal 23. Handle release on pedal to operating pedal: lower step handle (floor) to position; 24. Stair/upholstery nozzle 25. Crevice tool* 26. Bare floor attachment* holds *Included handle: unlock lower to brush bristles: shows rotated and release. cleaning set 20. Nozzle 21. Cleaning mode indicator: cord quick to hood close hooks 14. Recovery selector 19. Edge hose storage. 13. Clean for drawing. speed on HI, LO, or OFF. 17. Hood 18. Headlight: on both sides of Scrub module* Powered hand tool Carrying handle Clean solution tank handle Clean solution tank cap/ measuring cup 23 the slide button* TM holder (6) to solution. Hose hook Cord hooks: 4 like 16. Brush speed selector: release 8. 9. 10. 11. 12. :5 , 16 press Solution around \. trigger: Hand grip 6. 7. _6 cleaner 2. hook 4_ deep shown. 1. 1 6 assembled model with some models This deep cleaner is intended for household use. tank handle tank into position. 15. Recovery 20 tank: holds dirty solution. Operate deep cleaner only at voltage specified on data plate Plug deep cleaner into a properly grounded outlet. on back of cleaner. II ON/OFF pedal Handle Step on. on Step Gleaner pedal on (A) pedal to Cleaning (_ release turn again pedal deep to turn cleaner To Indicator room to deep rugs Step on pedal operating into a single convenient will (B) position. position operation. to lower Handle but handle does "floats" show FLOOR (C) operating off. To mode indicator a green when position and bare window handle for is in cleaning next position the wheels carpet floors. to not to lock allow Indicator to will show TOOL (D) upright position upholstery, Deep the window handle for tool is use in on next the stairs, etc. automatically cleaner suction from handle a green when is upright diverts FLOOR to TOOL when raised position. from the operating transport move to your put deep handle tilt and deep push cleaner in upright cleaner forward, from and back room locked on to The deep placing cleaner may a hand solution tank also under the handle as be lifted upper by Automatic shut off Brush speed selector clean When shown. the the recovery automatic off the deep to that The dirty the top of deep suction is full will shut agitator will HI (suction float disk recovery cleaner tank will and the noticeably 'SteamVac' no will lid longer pick motor sound higher rise (E). up will in pitch. - for continuing has three settings. normal cleaning of carpet and LO - for bare floors OFF - for floors gentle Gleaning of carpets cleaning when (Such as when page Slide is picking and not up bare desired. liquid spills. 10.) selector ting carpets brushing and button before to the desired set- cleaning. use. Check need cleaner floors See When this happens turn deep cleaner off and empty recovery tank before deep brush bare yellow the solution become tank) reduced). time the (lower mechanisrn cleaner be noticeably At tank shutoff Your clean to be solution tank Do not use without retainer lodged, Service also; it may refilled. float and float in place. If broken or distake to an Authorized Hoover Center or Dealer for repair. Ii P_[o] _.-.........---_ 5 OUNCES/ _._0 mI A t j- g Carry The tanks Clean solution (upper The clean a sink. tank Rotate and lift tank up to cap remove cap. the surface How tank that to to is to be the cleaner cleaner locked tank, handle onto Using For heavy traffic areas: Pre-treat with HOOVER Spray. PreCleaner* Gap, chart and pull to serve as a rneasure detergent following below. the cap to fill line (5 ounces) Carpet/Upholstery with HOOVER Detergent. For bare floors: Fill cap to fill line (5 ounces) Bare Floor Cleaner* with HOOVER position. press down on Do tank not forward. *Available included at with additional your cost model. if not use Bare Floor Cleaner on carpet or any type of wax with your 'SteamVac'Widepath deep cleaner. upholstery. handle down cup. For carpet, carpeted stairs and upholstery: Fill If you do not have access to the PreCleaner Spray, double the amount of HOOVER Detergent (use 2 capfuls or 10 ounces per I gallon tank). from in (A) upside cap measuring Glean- dispersed fill deep remove holds be cleaned. Disconnect deep electrical outlet. upright, Turn the solution solution To to tank) ing Place tank counterclockwise DO not use Continued ,,I) 7 NOTE: They with Use only are your HOOVER specially 'SteamVac' for deep CAUTION: Detergents Anionic and Nonionic V_II detergents. formulated use cleaner. contain Surfactants. Avoid contact with eyes and skin. In case of contact with eyes, flush with cold water for 15 minutes. In case of contact with skin, wash with water. Irritation persists, call a physician. For Medical Information (U.S.) call 1-800-752-7869. c If Pour detergent into tank. Fill tank to fill line (B) (1 gallon) with hot tap water. To assure proper HOOVER cleaning performance, If rubber ring dislodged, side (C) on cap reposition against has ledge (U) uneven as shown. only use detergent. P-Ill It Recovery (lower tank tank) The recovery tion that tank is up the matic shut-off will tank must the How holds picked When and recovery to the dirty from tank the be To Position press bottom on tank of tank handle into to unit snap and tank into place. solu- carpet. is full, engage the (see auto- page 7) emptied. empty Turn deep cleaner off and from electrical outlet. Replace cap. Rotate cap clockwise until it locks In place. Cap must be locked In place for proper performance and to prevent leaking. become it with prevent possible leaking, solution tank down on handle ward; set tank remove (Fig.2-8) clean tank disconnect and aside by pressing pulling (do ROt for- set tank on furniture). Step on and lower handle release handle (Fig. 2-2) pedal until it rests on the floor. i For full suction, it is important that the recovery tank lid is properly secured before cleaning. UNLOCK LOCK Raise tank place it into handle into (straight deep er and handle up) Gleaner. carry to to carrying unlock Lift it to tank a sink To position tank from base from deep Glean- or drain. of remove pletely tank toward lid, back lower of tank handle com- and lift off lid. Empty the tank and reposition the lid. base to of completely place Raise Raise handle handle and solution tank. position Fig. of deep reposition to to Move cleaner. forward (see position carrying deep lock tank 2-15). cleaner upper to clean upright under "Fill clean 2--14. Wet solution. Before cleaning you a. Vacuum thoroughly a for best cleaner results. a vacuum tool attachments. into - For carpet, vacuum with reach and an tool DO not cleaner 'Widepath' deep upholstery fabric minutes "wet" is to clean) or "S/W" "W" DO not marked "S" ("solvent/dry" If your upholstery does not professional be are too wax water according up a. help carpet prevent carpet, from or and blot matting keep surface until it is necessary pet, place towels traffic and children dry. resoiling and pets the away completely to walk on damp color white cloths on the areas. If furniture carpet foil is under slides or dry, be replaced place legs plastic of wood before or furniture finishes so will the aluminurrl metal not stain the white at least spots ten but spot. the it is over-wet dure the desired, the carpet of cleaner as follows. Note: When brushes seem to be rotating slowly, disconnect deep cleaner from electical outlet and check and clean this screen. cleaner Squeeze off screen place. to area rugs/carpet wood surface or back so frame, lift and push handle and frame pull rests on it out. back floor. Wipe floor material (e.g. befor_ cleaning. plastic) to place cost a non- waterproof underneath at additional damage area rugs/car- them with your if not included See pages model. 10-13 for instructions on various tasks. pick spot be rinsed. Ill for cleaning, surface's be or appear- careful not to upholstery. follow cleaning with clean solution no the only same using detergent hot in the proce,J tap upper tank. d. C. Ernpty and let cap and tanks, air rinse dry. Rinse recovery with clear to Remove reduce any cleaner's let air er. up flushed to the position. dried. shading debris two leR after This by becomes cups water as out located will the nozzle other Repeat screen dry. lodged in to remove of clear water on non-carpeted floor. Do not pour water onto a wood floor. Pick filter tank. brushes. clean one from recovery tank and thoroughly completely lint water solution lid upright vacuum has or the tank cleaner If desired, Pour located spray. underneath bare alu- sur- dry. is water If lint screen water or rnetal a house- may nozzle, do not attempt nozzle cover. filter possible or to wood floors pet, either move cleaning until with carpet To rinse, for To from use plastic wood Allow time for carpet or upholstery to dry completely between cleaning and deep Tilt from _Available areas. cleaner necessary improve after help lint to removal, type. if necessary. is not rinsing carpet bottom towels your Repeat scrub brush it may ance deep and carefully desired, traffic Use 'Widepath' b. If Return on protect foil frorn the spray and minutes. PreOleaner scrub f. Remove staining, minum stains with before carpet f.To prevent inside carpet. e. first ten paper is visible, onto rinsing. must wait elapsed and all varies g.To avoid wetting and possible by area; removes removal tirrle material, faces draperies. colorfastness with change hold If dry. If car- it is or To precarpet. solution Stain of spill, carpet heavy traffic PreCleaner*- hidden with cloth. up to and for a will cleaning carpets. type traffic foil staining spots and HOOVER® it on minutes or all furniture This legs. skirts PreOleaner Rinsing upholstery col- aluminum from furniture 'SteamVac' instructions cleaning Allow all high For place under is removed; After or If sur- check cleaned). finishes e. Pretreat areas with Wait - Mix detergent to the color, upholstery If you do not have access to the PreCleaner Spray, double the amount of HOOVER Detergent (use 2 capfuls or 10 oz. per 1 gallon} in the clean solution tank. removal or cloth. if only move, paper PreOleaner and be to wood If no assis- tance. c.Test for colorfastness one necessary to heavy spraying clean clean seek clean). than color or rub Wa]it cleaning entire floor, move out of area to be cleaned not Test (for or a code, (may Pin "solvent/dry" fabric only}. "wet" a towel carpet PreCleaner. No vent if the with more gently cloth. Do not saturate to the ors, areas use as a dry only rnarked for paper 2-8 with area, darnpened check white has hidden the _lnd with face or Gleaner with d.When furniture b. For upholstery, check cleaning code - Use your HOOVER 'SteamVac' have ten Figs. cloth agi- cleaning a crevice folds. use upholstery with Use tufts with Vacuum cleaner the 'SteamVac'deep vacuum cleaner. (for surface tank", absorbent In a small, the bleed HOOVER tator begin solution a white of with necessary nozzle. your deep until debris cleanis a Some models have a nozzle clean-out tool for peted removing floor is debris not available. or if a To non-caruse the tool: Disconnect cal outlet. Slide as tool deep into nozzle cleaner and from electri- remove debris shown. into Continued -I) 9 To clean wipe the off warm outside dirt water of with a and mild the cloth Keep machine, dampened detergent. use solvent or petroleum ucts to clean the machine. DO based nozzle in ward not 8. For prod- and 5-7. heavily Fill you begin cleaning" on page clean solution HOOVER with Detergent Figs. (upper to instructions 3. Dry hands erly grounded and avoid be plug over the end or emptied into prop- a on of the path to and filled. 5. Squeeze electrical damp farthest where from tanks (equals Continue on handle handle (second and slowly over area to cleaner operating pedal and position; push cleaner For stroke). wet noted or button TM Avoid saturating below. Always turn 7. deep best carpet, strokes end with with slowly you strokes. until little pull solution deep without (dry cleaner do over dry squeezing trig- stroke). Overlap vent the sound becomes is by 1 inch to help pre- is using dry in in mor_ strokes lid.) when the motor pitched suction shut-off", finished aid passing higher a loss cleaning" with tank tank to end visible recovery "Automatic When strokes (Continue recovery dry and carpet, water Empty and above. results of through there wet Gleaning dry forward alternate described drying toward trigger Gleaner to as and Release deep sprayed toward (dry back stroke). push just trigger cleaner lower ON. best strokes cleaning deep wet squeeze deep Then back release release one to pull you ger Step noted carpet Surge section). as faster stroke). will to slowly and forward slowly carpet, room sink out- trigger solution 6. floor walking door cord outlet. Do not clean lets. at Clean following It is start soiled the one area. strokes. for 2. Move speed selector to LO for gentle cleaning or HI for normal cleaning. the steps as 2-14. 2-8to 4. To for- repeat Note: To avoid saturating not use more than 4 wet tank) Carpet/Upholstery according both carpet, particularly carpet, 9. tank for areas, saturating use (see 1. floor strokes. below. spots, instructions on soiled Avoid 9. For Read "Before flat reverse and (see 2-6) Fig. cleaning, follow instructions on "After pages 9. streaking. When picking up spills on bare floors, Your deep cleaner may also be used to pick up small liquid spills (1 gallon or less, never to exceed 1/4 inch in depth) on carpet, upholstery, or Clean Surge Button TM (some models) Surge' dispense button extra particularly can solution soiled be when areas of used to cleaning carpet For best by placing nozzle just above up any 2. If the use, press squeezing 'Clean solution solution ue to Surge' spray, squeeze How to button solution trigger. attach ery floor tanks the on spill top the place nozzle the spills carpet. either or floor turned OFF in nozzle very no pletely suction slowly over by the spreading the effective all following the bare floor r_moving can they of the flammable or combustible the the it. com- can instructions surface spill). nozzle solution spots, manufa_cturer or for cleaning rernove the stair/upholstery be treat- provided carpet, being Do not use the deep cleaner nozzle of by stery, the front ed prevent left, mor_ Although imme- and of rernains, brushes pull up stair/upholstery initially Repeat with with suction spray only. and upholGleaned. to pick up liquids or chemicals. When suction. finished, instructions normal follow on pages "After cleaning" 9. contin- bare cleaner possible solution bare Set deep prevent tank is spots. while and help floor (some models) Disconnect cal outlet. clean For trigger. release attachment To button residue spill pick the upholstery with spill To results, diately spill, or will generally stair/ The 'Clean (this If a spot bare floors. 1. use only the floor nozzle with the bare floor attachment (some models) in place and speed selector in the OFF position (Fig. from leaking, remove (Fig. 2-8) tank 2-15) electri- before and recov- positioning attachment. aside (do not set tank on furni- ture). 1. With cleaner floor. 10 handle back in so upright that handle position, rests tilt on 2. the With foam netting) in attachment strip on Make sure points in arrow the (A) (located as shown, position front on direction of under nozzle end as of 3. Push rotating (B). ends attachment shown. the place attachment against attachment downward snap into nozzle until while both place. (Note: Some force may be required to rotate and snap attachment into place.) is 4. Return deep Lower tion. cleaner handle to and upright 6. To pick posi- replace recovery ger tank. 5. area Raise handle reposition To to clean upright position solution clean up and where 7. floor solution Empty Do not use the deep cleaner on hardwood floors. 8. 1. Disconnect cal outlet Bare Floor t_lr/k Clearler instructions Figs. 2-8 Do not use any type deep cleaner. 2. Move position with on handle cleaner loss When in over been and reverse when the / motor pitched and suction (see "Automatic to the Lo or HI or OFF if cleaning, instructions deep and follow on cleaner remove it in from from water. screen pedal operating *available ed at with Do not or foam move press cost if not includ- model model help nozzle provide some to C. Scrub scrub includes following and to the spots may module pad* has a built-in scrubbing need for For some be scrub stairs models, removed be (in the used as scuff to reach b_:]se place to of of scrub marks, stubborn dried areas on the brush spills, hard sur- faces. action carpeted hard to tool Can such in with detachable attaches hand areas rotating has scrubbing areas, can the t001 extra carpet brushes cleaned. combination and hand for upholstery. forward be some tools. A. Powered turn trigger. cleaner area to action additional your brushes deep over B. Stair/upholstery brush from module). Your _lnd position; solution, backward D electri- attachment clear c "After 9-10. pages powered ON. release \ removal. release to IIii dis- higher finished Rinse small Slowly forward tank remove plastic attachment. plug deep cleaner grounded outlet. and handle lower To just Fig.2-6) cleaning" of the deep 5. trig- cleaner is not desired. 3. Dry hands into a properly 4. Step a nozzle. of wax with your speed selector for scrubbing scrubbing to 2-14. to is shut-oft", HOOVER * according for both recovery there solution has becomes Read "Before you begin cleaning" instructions on page 9. clean release deep strokes. tank. sound Fill solution, move Use persed. and dirty slowly on D. Crevice and along the and for converting the trigger t0ol* edges on _some can of be carpet, used to carpeted clean stairs upholstery. models module. I How to attach Disconnect cal outlet, 1. Place deep handle remove tools cleaner in hose from upright from seconds). begin electri- position Then tools attach and With and Follow the for appropriate the instructions on pages cleaning 12-13 tool the task. the hose in the scrub module _ same 1. Open the tool door and remove the Connect tool connector until to hose by the tab (C) sliding it hand 2. the Grasp and securely. Using on powered your thumb, latch the (D) forward push to remove tool and up using 3. lift Pull and as shown. Before the be tool necessary system ("prime clean solution these steps: 1. Attach tool cleaner 2. Put against to the will to hose remove air pump") flow to and from so the tool test it from the Note: It scrub module may be the base module it onto to of the base. instructions 2. Hold scrub tool cleaner cleaned solution. and press deep base. necessary to so solution rotate it will the align 3. Release tool. Pick squeegee tank Cleaner for Figs. 2-8 above with on HOOVER to area to be to dispense scrub solution as 2-14. to trigger and dirty scrub to use _ according trigger up the before using If no surface continue module (E). from (F) slightly the brush is visible, below. Floor _included the area with with as shown. with some models Follow tool. turn Bare sides scrub snap properly It may tool. it onto locks scrub solution, on a hidden area desired surface. 1. Fill clean manner: 2. the a little change described rack. to Using cleaning. Attaching All squeeze the deep ON. the tool your on a hard hand to surface block off or the suc- tion. 3. Wait a few seconds (can take up to 1 5 Continued -I_ 11 After using To clean scrub scrub Wash it in water Rinse and let Pad must to pad, pull it off with detergent. air be taohing After tool mild 1. module. ing" dry. 2. completely module dry and before storing reat- on with pads may also Ask for HOOVER chased. be part on page tool with a tool steps Rinse deep deep cleaner, Replacement using Follow a 3. b for "After clean- 9. and hose small amount cleaner ON the and by of filling and pickup the water from removing module, tool the in brush openings tabs in Push Place into handle press for sev- trigger. cleaner from electri- 5. Drain solution by tube pointing pressing (located end inside of hose c, d, in sink trigger. with steps cleaning" on page and e, for 9. as of module with (O). position. Read "Before you begin cleaning" instructions on page 9. 1. up scrub manner back area module cleaner hose module. on storage not deep .6. Proceed no. remove same Do deep of outlet. and pur- turning end Disconnect "After To store scub Align seconds. by holding hose) 40308001. module eral cal tool. hose and 4. sink Turn water. Drain ON in upright A position. Agitator brushes will not rotate while handle is in upright position. 2. Fill clean Carpet/U to instructions 3. Attach at upper of to length placed clean tom tank stairs Figs. end may according 2-8 of the top of 7. that of the machine stairs stairway clean 2-14. to hose. require half to HOOVER with Detergent for tool 4. Hose be solution pholstery and lower the bot- half. (A) the while wet the tool above to at Pre-spray ing carpeted or carpet pressing the stair (B) about and push trigger by one hold- 9. inch it forward (equals Lift Pull Do not place deep from falling, use cleaning on stairs. stroke). cleaner on stairs. toward people 8. Position press pull wet Do not point tools or pets. 5. Dry hands a properly 6. Turn refer remove and deep to cleaner "Before air plug grounded from using the deep cleaner into outlet. ON. tool" system. the tool against the riser it into carpet pile. Press tool slowly over the stroke). Release trigger and the carpet at end pressing trigger It to slightly is trigger section best carpet (dry stroke). wet above. to riser. without aid in 10. Overlap of stroke. prevent and End faster dry with strokes by 1/2 strokes more drying and of dry carpet. inch to help streaking. To avoid saturating carpet, do not use more than 4 wet strokes over any one area. Always end with dry strokes. additional the using cleaning carpet the there is a When "ARer in tank when the motor higher pitched and suction (see "Automatic cleaning, instructions using before 2-6). finished cleaning" wait dry again. loss Fig. necessary, completely recovery becomes shut-off", is is tool 1 1. Empty sound 12 it against over (second until to position alternate described strokes If If necessary, and slowly one as To prevent machine extra caution when tool, tool tool" follow on instructions "After 9 page on and page 12. Read "Before you begin instructions on page 9. Be sure to check the your upholstery. only on upholstery cleaning" cleaning code A on your deep cleaner marked "W"or Use "W/S'. 1. Place handle Agitator in upright brushes will handle is in upright 2. Fill clean t_]r/k Attach HOOVER with Detergent to instructions for Figs. tool to while position. solution Carpet/Upholstery 3. position. not rotate end according 2a-8 to 2-14. of hose. Press the zle over 7. Overlap toward refer to remove 6. air Gently deep the press trigger 8. To press tool to the to clean fabric. in inch to without remove more corners inch the for noz- 9.Vacuum up without pressing 10. For heavily necessary the help to creases, lift fabric and the some The models) the original If the with the tool 11. using there areas, it may be is the Empty tool recovery to each pass. is a When loss "After in finished again. when the motor higher pitched and suction (see "Automatic cleaning, follow instructions using wait dry 2-6). Fig. Gleaning" necessary, completely tank becomes shut-off", trigger. soiled strokes is upholstery sound solution cleaning overlap cleaning the before very task. the the crisscrossing pattern; addition_fl until crevice is repeat Make Make no more than 2 passes with the solution over any one area to prevent over-wetting and damage to fabric. pressing moisture. trigger. in this or from solution (included useful onto 1/2 strokes one-half tool" tool the into system. the pull process. by additional tool section slowly streaking. Make ON. If necessary, using from cleaner outlet. cleaner "Before or the 4. Dry hands and plug a properly grounded 5. Turn deep people and fabric. strokes prevent Do not point tools pets. trigger the tool" on "ARer page instructions 9 on and page 12. Headlight replacement What The to deep base buy cleaner uses bulb, HOOVER type 7 a volt, wedge part no. 27313106. Where Bulbs rized to may be Hoover Service Hoover Company www. from dealers Factory Centers, deep or online clean Set The through at remove is equipped for Pull Turn cleaner off and with dry hands, disconnect deep cleaner from electrical outlet. 3. Push Excessive force 1. Reposition lens Using a screw Phillips as shown Turn cleaner screwdriver, and lift remove off locked old bulb new straight bulb into out straight of socket. into socket until place. is not required. and secure with screw. lens. easy with cleaning. brushes cleaner possible solution tanks 2. brushes brushes prevent to replace the cleaner Disconnect outlet. To Hoover h oover.corrl removable To autho- (Depot), Removable Your How buy purchased tank from leaking, and electrical remove recovery tank. aside. Press handle. facing handle up. release pedal over to so Grasp lower bottom is inner brush assembly latches (B). portion of out brush slightly (A) to and pull reveal 13 B Press both block out. under running (B) latches The and brushes pull can To brush be replace Press brushes brush firmly to snap into place. cleaned Align water. posts (C) assembly on with both ends slots (U) in the square of brush cleaner hous- ing. Make sure that aligns with the brushes square slightly hole until post post (E) (F). Turn fits also easily into hole. Storage Before storing: • Empty solution thoroughly • deep trigger • deep cleaner's deep Gleaner Empty on recovery thoroughly times with tank clean not use Allow brushes and underside of deep cleaner to air dry thoroughly before storing deep cleaner on a carpeted or wood surface. with a full motor life lubricant add is contain of the could lubricant equipped with sufficient motor. cause to motor check the list can cause addition damage. bearings. Make sure • Pump using needs tool) • See "Before lid is firmly in place to be "primed"(when using tool" p.ll section, below. Possible Possible solution • Not firmly plugged • Plug • No voltage in wall plug • Check fuse or" breaker • Blown fuse/tripped • Replace fuse/reset unit in for • of DO not breaker breaker cause tank full/automatic off engaged • Remove • Blockage • Remove • Recovery • and empty recovery in tool tool Make tank on end of hose and tank sure Possible clear blockage lid not on lid is on securely cause Possible solution • Solution • Make tank sure not firmly tank is securely in place looked in position • Solution • Refill surface • Dirty filter • Clean • Speed Move • solution Recovery shut cause solution screen screen as on bottom of unit in Fig. 3-2 shown in firmly correctly 14 • lid not on is bearings lubrication The the it usually when cause Possible which the Possible Possible Lubrication The using Possible rinse water. Do not store deep cleaner solution tank in place. by easily the floors.) and occurs, quite tank to in (Do wood problem solved Recovery correctly for- remaining system. minor be found cleaner several solution and Squeeze deep back any If a tank ON. push and expel rinse water. solution cleaner and ward and Glean empty Replace turn tank with • tank tank empty according being cleaned to instructions for selector speed on OFF selector to Low or Hi Service To HOOVER HOOVER parts, obtain and approved genuine the Vacuum Yellow • checking the Centers provided (Domestic of Your HOOVER(R) appliance OR Factory with in Service this 1-800-944-9200 automated for referral service outlet of an locations checking cost (U.S. only) the Service Company section on-line The of at send Company to North Canton for result in in only where If further assistance Hoover Response is Company Center, needed, contact North Canton, Ohio In Canada, contact Hoover Ontario plete identity model information model the number or number your ordering appears Gleaner when by the com- or in Military in else- a limited one the of does used service by presenting the following vice Always is including cost not year parts apply if the a commercial or application. Warranty Canada, LTR 4A8, Phone: 1-800-263-6376. Burlington, This appliance purchased covers is rental S. by warranty appliance 44720 Phone: 330-499-9499. U. covered only. This Consumer a which con- States Appliances are warranty The the no place period. possessions, from Exchange. service, delay. to operating United and or of at parts warranted the for date provides, and when in territories from correct the applies Canada year labor in during original workmanship warranty all appliance warranty its cleaner This purchased The Hoover your full warranted accordance against and one you, in Manual material of to this www.hoover.com will period is use, Owner's in dition Hoover this the purchase. authorized OR- Do not household defects a " normal with Gleaner OR" calling Use) under - Household" list Warranty Center Pages Cleaners Year the nearest Hoover Factory Service or Authorized Hoover Warranty Service Dealer (Depot) by: • checking One Full service locate can the only outlets. Proof before obtained to authorized required be appliance one warranty of purchase service is of ser- will be rendered. requesting (The parts. on the bottom 1. Hoover 2. Hoover Factory Service Centers. of cleaner.) Authorized Service Warranty Dealers (Depots). For an automated referral of authorized service outlets in the U.S.A., phone 1-800-944-9200 OR visit The Hoover Company on-line at www.hoover.com This warranty delivery, mail does or your Center to for transportation this legal rights, rights which be warranty If further you are ranty or outlets, Consumer Hoover North write Company, Canton, Phone Ohio way. specific have other to state. needed, or concerning availability Response one you state is questions the Factory service, also from assistance there Hoover a paid may of or up if you gives vary pick however, warranty will While cover calls; appliance Service vice not house this warranty phone warser- the Center, 101 East 44720, if The Maple St., 1-330-499-9499. In Canada, contact Hoover Burlington, Ontario LTR 4A8, Canada, 1-800-263-6376. 15