Transcript
CONGRATULATIONS
PRECAUTIONS
on the purchase of your EGO-360 Grace Speaker! Please read your manual carefully to familarise yourself with your EGO-360 Grace prior to setup & initial operation.
1. Care should be taken to avoid placing your EGO-360 Grace in the following locations: (a) Near heat sources or direct sunlight (b) Wet or humid locations 2. EGO-360 Grace is not waterproof. Do not allow water to enter your EGO-360 Grace
How to charge your EGO-360 Grace speaker
WARNING
1 . Insert the 3.5mm audio cable (6) into the 3.5mm port on the side of your EGO-360 Grace 2. Plug the Type A USB connector into an external USB power source (i.e. phone charger, PC/Laptop, car charger). 3. The LED indicator light (2) will glow red when charging and the red light will go off when EGO-360 Grace is fully charged. Charge Time =2-3 hours Playback Time = 4-6hours (playback time may vary as to volume level used)
GETTING TO KNOW
4
your EGO-360 Grace Speaker 1. All Aluminium ‘Uni-Body’ Design 2. LED Indicator Light 3. 3.5mm Port for Audio & Charging 4. Power Button 5. Audio Cable 6. Charge Cable
5
1
1. Never use with a damaged or defective power supply cord. 2. Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects into your EGO-360 Grace speaker. 3. Do not expose your EGO-360 Grace speaker to extremely high or low temperatures. Please visit our website for a full instruction manual,accessories, FAQ’s, support & more: Manufactured in China www.ego-360.com
PLAYING MUSIC How to use Cable Connection 1. Connect your EGO-360 Grace to the external sound source with the 3.5mm audio cable(5). 2. Turn EGO-360 Grace on by pressing the button on the base(4) and the LED light(2) will flash blue 3. Now control your sound with your external source. 4. To turn EGO-360 Grace off, please hold the power button(4) and it will beep and then the LED will flash red to indicate that the power is now off.
EGO-360 GRACE
EGO-360 Grace Speaker with Bluetooth
2. Please go to Bluetooth settings on your device and connect to EGO-Grace and enter 0000 if a pass code is requested. 3. When EGO-360 Grace has paired, the LED light will flash blue. 4. Now control your sound from your external source and the blue LED light will illuminate continuously . 5. To turn EGO-360 Grace off, please hold the power button and “Grace” will beep, the LED light will flash red to indicate that the power is now off.
How to use Bluetooth
2
3
6
EGO-360 Grace needs to be in Pairing Mode when connecting for the First Time only. 1. Hold the button(4) for approximately 5 seconds, the blue LED light (2) will start flashing and it will flash blue and red and tell you that EGO- Grace is pairing,
4 Super-mini Size yet Powerful Sound
Visit ego-360.com for support, store locations & more
Visit ego-360.com for support, store locations & more
