Transcript
1 Verify Kit Contents Verify that your kit contains one of each of these components: S2 X5 X18
X24
J1
X27
X16
Quick Start Guide
Quick Start Guide
X29
Digi JumpStart Kit®
S4
Windows Embedded CE 6.0 ConnectCore™ Wi-9M 2443
X7
S7
Digi JumpStart Kit®
Quick Start Guide (this guide)
Windows Embedded CE 6.0 ConnectCore™ Wi-9M 2443
S6 X6 S3
S5 X33
X23
Digi JumpStart CD
Development Board 802.11 a/b/g Antenna
90033928_C
802.11 b/g Antenna
2 Install Software Certification Card
Serial Null Modem Cable
Ethernet Cable
S hift
Microsoft
Alternative Power Supply Plugs Power Supply
a
Windows Embedded CE 6.0 180-Day Evaluation Kit
Insert the Digi JumpStart CD. If autorun is enabled, the “Welcome” web page will appear. If not, open the file “welcome.html” on the Digi JumpStart CD. Follow the instructions on the “Welcome” page to install Digi Embedded Windows CE software.
3 Connect Hardware to Development Board a
Connect Serial Port A
b
Connect Ethernet and/or antennas
Connect to VGA Monitor
c 802.11 a/b/g antenna
VGA Port [X18] Power Connector [X24]
S2
d
X18
X24
X29
S4
X27
or
Secondary [X29]
J1
a
Connect to PC Serial COM Port
b
X5
ON
802.11 b/g antenna
X7
Connect to Network
b
S7
Ethernet Port [X7]
Serial Port A [X27]
c
Connect VGA cable from VGA monitor (not included in kit) to VGA port
X16
S6 X6 S3
d
Add the appropriate plug and connect the power supply. Do not switch power on.
802.11 a/b/g antenna
b
S5 X33
X23
802.11 b/g antenna
or
Primary [X23]
Development Board
4 What’s Next? a
Software instructions are on the Welcome page of the CD-ROM. When the software installation is complete, follow the instructions in Building Your First Application. This guide introduces you to quickly creating and running an application in the target platform. Building Your First Application is accessible from the Start menu group.
b
After going through Building Your First Application, you are encouraged to read the ‘Digi JumpStart for Windows Embedded CE 6.0 User’s Guide,’ accessible from the Visual Studio menu Help > Help Contents, which explains in detail all the elements of the development process such as kernel configuration, debugging, file transfer, firmware update, etc.
© Digi International, Inc., 2011 Digi, Digi International, ConnectCore, Digi JumpStart Kit, and the Digi logo are trademarks or registered trademarks of Digi International, Inc., in the United States and other countries worldwide. All other trademarks are the property of their respective owners.
