Transcript
CONSUMER LIMITED WARRANTY AGREEMENT Your product is covered by a limited warranty by VM Audio as established below: Mobile Electronics Limited Warranty Products purchased from an Authorized VM Audio Dealer are warrantied to be free of defects in material and workmanship for one (1) year from the date of original purchase under normal usage. Products that are identified as “refurbished” have a limited warranty of ninety (90) days from the date of original purchase. Dated proof of purchase (original receipt or invoice) will be required for all warranty claims. In the unlikely event that you experience a manufacturing defect or malfunction during the warranty period, VM Audio will repair the defective product or replace with the same or equivalent product if the same item is not available or discontinued. Replacement product may have superficial blemishes or scratches that do not affect the performance of the product. This warranty is only intended and valid for the original purchaser and cannot be extended to subsequent owners. Any applicable implied warranties are limited to the period of the expressed warranty starting from the original purchase date. No warranties, expressed or implied, will be accepted after the previously listed periods. Exclusions may apply; please check your local state laws. Instructions for Claiming Warranty Service If you should require warranty service, please return the product to the authorized VM Audio Dealer you originally purchased the item from for experienced and speedy warranty service. Contact VM Audio directly to find the authorized dealers nearest you. In case the defective merchandise needs to be returned to VM Audio, please contact us and a Return Merchandise Authorization (RMA) number will be assigned to you. It is important to pack all defective items in the original packaging to prevent damages from shipping, and be sure to write the RMA number clearly on the outside of the box for faster processing. Do not include non-defective items as it is not necessary and will increase your shipping costs. Include a copy of the original receipt or invoice with the purchase date, dealer’s name and customer’s name and invoice number clearly visible. Manufacturing date may be used if no proof of purchase is provided. The customer will pay to ship the defective product; COD will not be accepted. Please follow the above instructions carefully to prevent voiding your warranty. Your Warranty Service Does Not Cover the Following: -Products not purchased from an Authorized VM Audio Dealer -Damages from poor installation by not following the included instruction manual. -Damages due to excessive moisture, heat and other elements from improper care. -Evidence of tampering or repair by non-authorized personnel. -Products not issued an RMA number. -Damage during freight from poor packaging or handling. -Return shipping on non-defective items. Warranty Turnaround Time It is VM Audio’s goal to turnaround the merchandise in a timely fashion of one (1) week. Unexpected delays may occur due to repair parts or replacement shortage. International Warranty Please check with your Authorized International VM Audio Dealer or distributor for specific warranty policies and processes for your country. Customer Care Contact Info: Email:
[email protected] Phone: (855) 283-4699 Web Site: www.vmaudio.com
EXS652M ELUX MARINE FULL RANGE SPEAKERS
INTRODUCTION
INSTALLATION PROCEDURES
Congratulations on your purchase of an Elux Series product from VM Audio. You have seen that with years of acquired taste for quality, the Elux Series has the right design and performance to satisfy your utmost demand. With music so clear and rich and bass so low and loud, you will be immersed in a world of musical euphoria that anything else will seem like white noise. By following the installation instructions carefully, you will ensure yourself performance that will be enjoyed from each use for years to come. Reward yourself with the finer things in life.
+
INSIDE PACKAGE • • • • •
Coaxial Speaker System (2 pieces) Woofer Grilles (2 pieces - attached to speaker) Phillips-Head Stainless Steel Screws (4 pieces) Stainless Steel Washers (4 pieces) Mounting Template
FEATURES • • • • • • • • • • • • •
1. Determine the mounting location for the speaker and mark the cutout circle and screw holes using the template provided.
2. Carefully make the cutout circle using the appropriate tool for the panel material.
2-Way Coaxial Dynamic Driver Design Propulsion Drive Flux-Cycle Motor System Wide-Angle Sound Dispersion Diaphragm Image Enhancing Wave Array Grill Complete Marine Weather Protection Components Corrosion Free One-Piece ABS Full Frame Basket Element Protection Treated PP Injection Cone UV/Salt Water Repellent Suspension System NBR Treated Rubber Surround Treated Linear Nomex Damper High-Strength Kapton Former with KSV Voice Coil Direct 13mm High Frequency PEI Driver Balance-Dome Tweeter with Neodymium Magnet
4. Pull the speaker wires through the cutout circle and connect them to the terminals. The positive terminal is marked with a “+” and negative with “-”.
(B) (A) (D)
INSTALLATION CONSIDERATIONS • Always disconnect the main power source or battery system before any electrical installation is performed. • Before drilling and inserting any screws or making any type of cutouts; ensure there is enough clearance behind the speaker panel. Be aware of gas tanks, fuel or hydraulic lines and electrical wires that may be located behind the panel you will be working on, and make sure to not cut or drill through these obstacles. • If existing speaker wires are being replaced or new ones are being installed, run all wires first before mounting the speakers. • Avoid running wires through sharp corners and edges. Always use rubber grommets to prevent wires from exposing and causing an electrical short circuit. • Be certain that the speakers are mounted firmly and secure on the panel. If they are not firmly secured, the speakers can become a dangerous projectile in a collision and cause severe injury. • Although these speakers are designed to withstand the harsh marine environment, they are not waterproof and should not be submerged under water. • Failure to connect the speakers as shown will result in damage to the speakers which will not be covered under warranty.
3. Drill the screw holes with an electric drill using 1/8” bit.
(C) SPECIFICATIONS Woofer................................... 6.5 in. (165mm) Tweeter................................... 1/2 in. (13mm) Power (RMS)................................... 125 Watts Power (Peak)................................... 250 Watts Frequency Response................................... 60Hz - 20kHz
5. Mount the speaker into the cutout circle and secure the speaker using four screws, each one around every other slot on the speaker frame.
Sensitivity................................... 90 Nominal Impedance................................... 4 ohms (A) Trim Ring Diameter................................... 7.68 in. (195mm) (B) Trim Ring Height................................... 1.10 in. (28mm) (C) Mounting Diameter................................... 5.59 in. (142mm) (D) Mounting Depth................................... 2.52 in. (64mm)
