Transcript
Step 1
CONTENTS
PREP THE BACKPLATE
INTEL
INTEL LGA 1155/1156
x4
LGA 2011
If using LGA 2011, skip to step 3. Screws K attach directly into the CPU socket studs. (No backplate needed)
INTEL LGA 1366
J
ADHERE BACKPLATE TO REAR OF MOTHERBOARD
Line up inserts with holes on back of motherboard.
Step 3 INTEL
PREP METAL RETENTION KIT Use J for LGA 1155, 1156, & 1366
Snap top and bottom plastic inserts together on either side of ring.
D
B
x2
K
x4
F x4
H
E x4
G x4
I
Snap threaded metal inserts into place.
L
F
Step 5 INTEL
MOUNT RADIATOR & FAN TO CHASSIS
Step 6 INTEL
a. ATTACH PUMP TO MOTHERBOARD b. TIGHTEN SCREWS IN AN “X” PATTERN
Use K for LGA2011 TOP VIEW
Step 7 INTEL
CONNECT FAN TO PUMP FAN OUTPUT CABLE
Step 8 INTEL
CONNECT PUMP POWER CABLE
2
G
I
x4
a. ATTACH RETENTION RING B TO PUMP b. SNAP RETAINING CLIP L TO THE RETENTION RING, LOCKING RING TO PUMP
J or K
H
E
Step 4 INTEL
B
A
C
A
Step 2 INTEL
4
L
TOP VIEW
3 Use OUTER configuration for LGA 1366 & LGA 2011
Use INNER configuration for LGA 1155, & LGA 1156
1
Plug pump power cable into CPU fan header on motherboard.
Step 1
PREP THE BACKPLATE
AMD
Note: Remove stock AMD retention bracket first.
C
This page is intentionally left blank for customer product identification and branding.
Step 2 AMD
ADHERE BACKPLATE TO REAR OF MOTHERBOARD
Line up inserts with holes on back of motherboard.
Step 3 AMD
PREP METAL RETENTION KIT
a. ATTACH RETENTION RING D TO PUMP b. SNAP RETAINING CLIP L TO THE RETENTION RING, LOCKING RING TO PUMP
Step 5 AMD
MOUNT RADIATOR & FAN TO CHASSIS
Step 6 AMD
a. ATTACH PUMP TO MOTHERBOARD b. TIGHTEN SCREWS IN AN “X” PATTERN
Step 7 AMD
CONNECT FAN TO PUMP FAN OUTPUT CABLE
Step 8 AMD
CONNECT PUMP POWER CABLE
2
D J G
E
4
H L
I
F Snap threaded metal inserts into place.
Step 4 AMD
Snap top and bottom plastic inserts together on either side of ring.
TOP VIEW
3 Use OUTER configuration for AM2, AM2+, AM3, & AM3+
1
Plug pump power cable into CPU fan header on motherboard.
