Contents

Transcript

CONTENTS Dear Customer, Thank you for purchasing the JVC S-VHS video cassette recorder. Before use, please read the safety information and precautions to ensure safe use of your new VCR. Buttons,ConnectorsandIndicators................................................4 Connections andPlug&PlaySetting ................................................5 CAUTIONS InitialSettings..............................................................................6 Language Setting .................................................................... 6 Clock Setting .......................................................................... 6 Tuner Setting .......................................................................... 7 Cable Box and/or DBS Receiver Control Setting ..................... 7 CAUTION: Playback ...................................................................................... 9 Basic Playback Playback ....................................................................... Features ................................................................... 9 9 TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning an equilateral Recording ............_......................................................................11 Basic Re_ording Recording ................................................................... Features ............................................................... 11 1[ VCR Plus+ _'Setting VCR Plus+ _ Timer ................................................ 12 .............................................. 12 Programing Express Timer Programing 24HR Quick Programing .................................................... ...................................................... The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating arid maintenance (servicing) instructions in the literature accompanying the appliance. 13 13 OtherFunctions ..........................................................................14 Timer display .......................................................... 14 Checking warning tape position ......................................................... 14 Changing display information ............................................... WARNING: 14 14 TO PREVENT FIRE OR SHOCK HAZARD, THIS UNIT TO RAIN OR MOISTURE. Satellite Auto Recording ....................................................... Child lock ............................................................................ 16 16 CAUTION: Multi-Brand 17 This video Function settings Changing .................................................................. Remote Remote Control Control ................................................ Code ........................................... Audio with Another Dubbing Insert Editing VCR ...................................................... .................................................................... and AV Dubbing ............................................. cassette recorder 60Hz only. To prevent electric shocks other power source. 17 Editing .._.................................................................................... 18 Editing symbol, within to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. TimerRecording ..........................................................................12 Changing flash with arrowhead triangle, is intended should NOT be used with and fire hazards, 18 CAUTION: 19 TO PREVENF ELECTRIC SHOCK, MATCH PlUG TO WIDE SLOT, FULLY INSERT, 19 DO DO WIDE EXPOSE AC 12OVa,, NOT use any BLADE OF ATTENTION: Specifications ..............................................................................20 POUR EVITER IES CHOCS El ECTRIQUES, INIRODUIRE LAME LA PLUS LARGE DE IA FICHE DANS LA BORNE Troubleshooting .......................................................................... 21 CORRESPONDANfE FOND. DE LA PRISE ET POUSSER LA JUSQU'AU FORSERVICING (Onlyin U.S.A.).................................................. 22 Note to CATV system installer: This renlinder is provided to call the CRTV system installeffs attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practicah WARRANTY (Onlyin U.S.A.).......................................................23 --1 -- IMPORTANT PRODUCT SAFETY INSTRUCTIONS NOTE: Change or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant toPart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accord/ance with the instructions, may cause harmful interference to radio conlmunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, whi(h can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna. increase the separation between the equipment and receiver. Conne(t the equipment into an outlet on a circuit from that to which the receiver is (onnected. Consult help. the dealer or an experienced ATTENTION: Follow and obey all warnings and] instructions marked on your produ(t and its operating instructions. For your safety, please read all the safety and operating instructions before you operate this produ(t and keep this booklet for future reference. INSTALLATION 1. Grounding or Polarization (A) Your product may be equipped with a polarized alternating( urrent line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. (B) Your product may be equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type pl us. 2. Power Sources different radio TV re( hnician Declaration of Conformity Model Number: HR-S5902/5g 12U ffade Name: JVC Responsible Party: IVC Amerk as Corp. Address: 1 700 Valley Road Wayne, Telephone Number: 973-31 7-5000 Electrical energy can perform many useful functions. But inlproper use can result in potential electrical shock or fire hazards. [his product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following bask rules for its installation, use and servicing. for N.J. 07470 [his devi(e complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (I) This device nlay not cause harmful interference, and (2) this devi(e must a_(ept any interference received, inc[uding interference that may cause undesired operation. Failure to heed the following precautions may result in damage to the VCR, Remote or video cassette. 1. DO NOT place the VCR . . . ...in an environment prone to extreme temperatures or humidity. ...in direct sunlight. ...in a dusty environment. ...in an environment where strong magnetic fields are generated. ...on a surface that is unstable or subje(t to vibration. 2. DO NOT block the VCR's ventilation openings. 3. DO NOT place heavy objects on the VCR or on the Remote. 4. DO NOT place anything which might spill on the top of the VCR or on the Remote. 5. AVOID violent shocks to the VCR during transport. VCR Plus+, C _and PiusCode are registered trademarks Development Corporation. The VCR Plus+ system is manufactured under license Gemstar Development Corporation. of Gemstar from For Customer Use: Enter below the Model No. and Serial No. which are located on the rear of cabinet. Retain this information for future reference. Model Serial • Cassettes Power supply cords should be routed so that they are not likely to be walked on or pinched] by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the produ(t. 5. Ventilation Slots and openings in the (abinet are provided for ventilation.To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. • Do not block the openings by placing the product on a bed, sofa, rug or other similar surface. • Do not place the product in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 6. Wall or Ceiling Mounting The product should be mounted to a wall recommended by the manufacturer. No. ANTENNA No. marked Operate your product only from the type of power source indicate(] on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. If your produ(t is intended to operate from battery power, or other sour(es, refer to the operating instructions. 3. Overloading Do not overload wall outlets, extension cords, or integral (onvenience receptacles as this can result in a risk of fire or electric shock. 4. Power Cord Protection INSTALLATION or (eiling only as INSTRUCTIONS 1. Outdoor Antenna Grounding If an outside antenna or cable system is (onne(ted to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up stati( charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, "S-VHS" and "VHS" can be used with provides information with regard to proper grounding of the mast and supporting stru(ture, grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding ele(trode. this video cassette recorder. However, S-VHS recordings are possible only with cassettes marked "S-VHS". By using S-VHS ET it is possible to record and play back with S-VHS picture quality on VHS cassettes with this VCR. • As an ENERGY STAR' Partner, JVC has determined that this product or product model meets the ENERGY STAR' guidelines for energy effi( iency. --2-- SERVICING 2. Lightning For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning an(:] power-line surges. EXAMPLE OF ANTENNA GROUNDING AS PER 3. Power Lines NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with be fatah them GROUNDCLAMP DISCHARGEUNIT (NECSECilON _ANTENNA 810-20) = _ ELECTRICSERVICE CONDUCTORS (NECSEC[ ION 8 0-2I ) GROUNDING "_,,,, GROUNDCAMPS POWER SERVICE GROUNDINGELECTRODESYSTEM /NECAR 250 PANI H) NEC - NATIONAL ELECTRICAL CODE might USE 1. Accessories ]b avoid personal injury: • Do not place this product on an unstable cart, stand, tripod, bracket, or table. It may fall, causing serious injury to a child or adult, and serious damage to the product. • Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or solE] with the product. • Use a mounting accessory recommended by the manufacturer and follow the manufacturer's instructions for any mounting of the product. • Do not try to roll a cart with small casters across thresholds or deep-pile carpets. 2. Product and Cart Combination PORTABLECART WARNING A produ_ t and cart combination should be moved with care. Qukk stops, excessive force, and uneven surfaces may Eause the product and cart combination to overturn. 3, Water and Moisture Do not use this product near water for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swinlming pool and the like. (Symbolprovidedby RETAC) D 4. Object and Liquid Entry Never push objects of any kind into this product through as they may touch dangerous voltage points or short-out could result in a fire or electric shock. Never spill liquid kind on the product. 5. Attachments 1. Servicing If your product is not operating correctly or exhibits a marked change in performance and you are unable to restore normal operation by following the detailed procedure in its operating instructions, do not attempt to service it yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 2, Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. (. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e. If the product has been dropped or damaged in anyway. f. When the product exhibits a distinct change in performance-this indicates a need for service. 3. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or which have the same characteristics as the original part. Unauthorized shock or other hazards. substitutions may result in fire, electric 4. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in safe operating condition. Howto usetheRemote Be_re use, insert two AA size batteries into the Remote with the polarity (L_ an(] (_) matched correctly as indicated on the battery compartment or on the lid. The Remote can operate most of your VCR's functions, as well as basic functions of TV sets, cable boxes and DBS receivers. • Point the Renlote toward component. • The maximum operating the remote distance sensor on the target of the Remote is about 8 m. NOTE: If the Remote does not work properly, remove its batteries, a few secon(L_, repLrce the batteries and then try a_qain. openings parts that of any wait for Videoheadscleaning Do not use attachments not recommended by the manufacturer of this product as they may cause hazards. 6. Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 7, Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. The heads get dirty in the following cases: • in an environment prone to extreme temperature • in a dusty environment • flaw, dirt or mold on vide() tapes • continuous usage for a long time or humidity. Use a dry cleaning cassette -- TCL-2 -- when: • Rough, poor picture appears while a tape is played back. • The picture is unclear or no picture appears. • "USE CI.EANING CASSETTE" appears on the screen (only "SUPERIMPOSE" set to "ON" (Z_" pg. 15)). with ATTENTION: To mobile phone users: Using a mobile phone in the vicinity of the VCR may cause picture vibration on the TV screen or change the screen to a blue back display. On placing the VCR: Some TVs generate strong magnetic fields. • Make sure to place theVCR at least 20 cm (7 or 8 inch) away from a TV. • DO NOT place the VCR close to a TV as it may cause noise, picture disturbance or malfunctions (power off, etc.) to occur. --3-- Remote SET IXndicators [A/B] POWERc)/t FrontPanel 24HR QUICK PROGRAM INSERT Cassette loading slot REC LINK TV/VCR A.MONITOR REVIEW - DISPLAY [(l/_,_ ] DAiLY(M-F) Number Advanced JOG dial ke WEEKLY AUX POWER C2/I CANCEL [C.RESET] " TIMER DATE+iCH+/SKIP SEARCH SP/EP S-VIDEO input cl)nnector VIDEO/AU DIe C( )nl3ect( )lS input STOP/EJECT FF PAUSE Display panel Timer mode indicator OK [ENTER/OSD] MEN[ VCR mode Hay indicatol SHUTTLE AV [TV CH+/-] indicator Retold SHUTTLE [TV VOL+/-] I Channel and auxiliary PLUS input/Ch:)ck time RearPanel The glow-in-the-dark buttons shown in white on the illustration above are helpful when using the Remote in darkened rooms. CABLE BOX ANT. IN AC powei cord S-VIDEO IN S-VIDEO On-screendisplay OUT If you press OSD (OK) on the Remote when "SUPERIMPOSE" is set to "ON" (L_" pg. 15), you can see the to move the highlight bar to "D.S.T.", then press _V repeatedly until the desired setting is selected. AUTO: Select if you want to adjust your VCR's clock automatically by the inconling signal from the host (hannel. (Auto Daylight Saving Time enables automatic adjustment of the VCR's clock at the start and end of Daylight Saving Time.) Be sure to sele(t the correct time zone manually in step Lq. ON: Adjustment will be made by the built-in clo. to vA_, VEHO FUNCTION SET TUNER SET G_IH | V:_IE.']q Press OK or _> to move the highlight bar to "TIME ZONE", then press _V repeatedly until "AUTO" or the desired time zone is selected. Each time you press the button, the time zone ( hanges as follows: "-"AUTO _-_ ATLANTIC _-_ EASTERN _-_ CENTRAL MOUNTAIN _ PACIFIC ","*ALASKA _ HAWAII IOIT[AL SET This VCR offers you the language view menus and some messages choice -- in to CLOCKSET GUIDECHAHOELSET CABLEBOXSET DBORECEIVER SET English, Spanish or French. Press _V to move the highlight bar (arrow) to "LANGUAGE', then press OK or _> repeatedly until the desired language is selected. Press MENU to return to normal screen. will [] Selecttimezone to "INFF[AL [] Selectlanguage Language selection failure o(( urs. (or AV (back to the beginning) [] Complete Semiauto ClockSet Press MENU to return to normal screen. Turn off the VCR. "Aut" will appear on the display panel while the clock is being set. [he ( urrent clo(k time will appear automatically when the ( Icx-k setting is complete. be reset to "ENGLISH" after a power Selections "AUTO" ClockSetting and D.S.T. mode will failure be reset to o(curs. Settingclockmanually Perform clock setting only if the clunk has not been set (orrectly by the Plug&Play setting or if you use a cable box. Turn on the VCR and TV, and select the VCR ( hannel mode). of host channel after a power - ManualClockSet First follow steps [] to [] following steps. (or AV in "Preparations" above, then go to the [] Sel lime, dateand year Preparations [] Access MainMenuscreen, thenInitial Setscreen Press MENU on the Remote. Press _V nlove the highlight bar (arrow) SET", then press OK or _>. to Press ,/_,V until the desired time appears, then press OK or _>. Set the date an(:] year in the same way. • Holding ,/_,V changes the time in 30minute intervals, or changes the date in 15-day intervals. VAIN VEHU FUNCTION SET TUNER SET _IH|V:_IE3q to "INITIAl. HOST CH D.S.T. TIME ZONE m LAHOUAGE EHGLIOH GUIDE CHAHOEL SET CAOLEOOXSET OBO RECEIVER SET OFF: : AUTO : AUTO :AUTO YEAH (CATV) | l CLOCK SET Press OK or _> to move the highlight bar to "D.S.T.", then press _V to select the desired setting. ON: Adjustment will be made by the built-in clock itself. IHITIAL SET P*. // HATE ICLOCKSET [] SelectD.S.T.mode [] Access ClockSetscreen Press _V to move the highlight bar (arrow) to "CLOCK SEI ", then press OK or • ME _ TIME DATE 1:00AM z_12/24 YEAR OOWEOt Select when Daylight Saving Time does not apply to you. [] Startclock Settingclocksemiautomatically - SemiautoClockSet Press MENU You (an change the host channel/D.S.T. (Daylight SavingTime)/ time zone setting manually. First follow steps [] to [] in "Preparations" above, then go to the following steps. and normal screen appears. To make corrections any time during the process Press OK or _ repeatedly until the item you want to ( hange blinks, then press _. NOTE: The time set previously will be erased when "AUTO CLOCK'; "HOST CH'; "D.S/f: " or "fTME ZONE" setting is changed. Manual O( setting of the (lock will be lost after a power failure ( urs. [] SetAutoClockto ON Press OK or _> on the Remote repeatedly to move the highlight bar to "AUTO CLOCK", then press _V so that "ON" is selected. TIME DATE CLOCK SET '. HOST CH D.S.T. TIVE ZONE YEAR _AUT_ : AUTO : AUTO ] 03 (CATO) / | [] Selecthostchannel You can either select "ALYI-(_)" or enter Press OK or _> to move the highlight press ,/_,V repeatedly number is selected. until • Some do not transmit PBS channels "AUTO" a PBS channel bar to "HOST or the desired clock setting number. CH', then PBS channel data. CONTINUED --6-- ON NEXTPAGE CableBoxand/or DBSReceiverControl TunerSetting Turn on the VCR and TV, and select the VCR ( hannel mode). Setting (or AV The following procedure is required if you receive your TV channels through a cable box (descrambler) and/or if you receive satellite channels through DBS (Direct Broadcast Satellite) receiver. The Controller allows the VCR to automatically switch the cable box or DBS receiver's channel during timer recording. Settingchannelsautomatically - Auto ChannelSet Perform correctly Auto Channel Set only if d/annels by the Plug&Play setting. [] Access MainMenuscreen,thenTuner Setscreen Press MENU on the Remote. move the highlight NOTES: have not been set • The Controller is not supplieEI with this unit. It can be requested by mailing in tile completed lVC (able Mouse Certificate that is included with tile accessory package. • Fbr tile cable box, tile Controller is effective for VCR Plus+ or MA,. MENU FU=T,O. SET Fxpress timer programing. • For tile DBS receiver, the (bntroller is effective only for Fxpress timer progmming, • When connecting your cable box or DBS receiver, refer to its instruction manual. Press '/_x,V to bar (arrow) to "TUN ER SET", then press OK or _>. [] PerformAutoChannel Set TUNER SET Press ,/_XV to move the highlight bar (arrow) to "AUTO CHANNEl SET", then NANU Turn on the VCR and TV, and select mode). CATV _ET press OK or _>. The VCR selects the correct band (TV or CATV) automatically during Auto Channel Set. • When Auto Channel "SCAN COMPLETED" If both a cable box and a DBS receiver are used, position the Controller so its signal reaches the remote sensors on both the cable box and DBS receiven AUTO CHANNEL SET screen. • If the scan was unsuccessful, "SCAN [] AttachController SCANNING... COMPLETED-NO SIGNAl.-" appears on screen. Check the connections and start again. Press MENU (or AV Situate Controller [] Set is complete, appears on the VCR channel Fix securely Controller. using the adhesive strip attached on the back of the Cable box or DBS ieceiver to return to normal screen. Settingchannelsmanually - ManualChannel Set You can add the channels not want manually. you want or delete the channels you do [] Access MainMenuscreen,thenTuner MA_N MENU Setscreen FU.CT,O. set Press MENU on the Remote. Press ,_V move the highlight bar (arrow) SET", then press OI4, or P*. to Contio[Jer Your VCR INITIALSET Press _V to move the highlight (arrow) to "MANUAL CHANNEL then press OK or P>. bar SET", TUNER SET BAND AUTO CHANNEL SET CATV RF out Transmitter [] Addor SKIp'" desiredchannels _ANOALC.ANNEESET [] Audio/video output I I To AUDIO/VIDEO IN Press the Number keys on the Remote to input a channel number you want to add. Press OK or P>to set to"ADD". Repeat [] to [] to add other channels. Press MENU to return to normal screen. To skip channels [] Press '/_x,V or the Number keys to select want to skip. [] Press OK or P>to set to "SKIP". [] Controlle[ I To A NT. I N _, To add channels [] locations) [] Connect cableboxand/or DBSreceiverto VCR [] Access ManualChannel Setscreen [] {suggested to "TUNER Repeat [] to normal After a power "CATV'. and [] to skip other channels. screen. failure occurs, band selection a channel number Press MENU will you • If your cable box or DBS receiver does not have audio/video output connectors, connect the RF output terminal on the unit to the AN]. IN terminal on the rear of your VCR. • If your cable box or DBS receiver has audio/video output connectors, connect an audio/video cable between the AUDIO/ VIDEO IN connectors on the rear of the VCR and the audio/ to return be reset to video output connectors on the unit. • If both a cable box and a DBS receiver are used, it is recommended that you connect the DBS receiver to your VCR% AUDIO/VIDEO IN connectors and the cable box to your VCR's ANT. IN connector. CONTINUED --7-- ON NEXTPAGE [] Connect Controller to VCR Connect the Controller to the CABLE BOX [] Controller connector on the rear paneh following [] Turnoncablebox or DBSreceiver Select a channel other than channel 9 on your channels 100, 205 on your DBS receiver. cable Press MENU on the Remote. Press _7 to move the highlight (arrow) to "INITIAL SET", then press OK or P_. bar [] Access CableBoxSetscreen or DBS Receiver Set screen IRmA_BE_ G_GGK GET LANGUAGE ENGLISH Press/,_,_7 to move the highlight bar (arrow) to "CABLE BOX SEI" or "10BS RECEIVER SET", then press OK or _>. GUIDE CHANREL SET DesRECEIVER GET Your selection depends on how the unit is (onnected to your VCR. • If the unit is connected to your VCR's CABLEGOXSET "1_1_ ,, ANT. IN terminal on the rear panel, Press _V until the channel number representing the cable box's output (CH2 CH9) or DBS receiver's output (CH3 or CH4) appears on the screen. • If the unit is comEected to your VCR's AUDIO/VIDEO IN connectors on the front panel, press _V until "ON F-1 (FRONI)" appears on the screen. • If the unit is comEected to your VCR's AUDIO/VIDEO IN connectors on the rear panel, press _7 until "ON L-I (REAR)" appears on the screen. • If you do not use any unit, press _V until "OFF" appears on the screen. [] Access BrandSetscreen Press OK or l>. • If the Clock Set screen appears, perform "Manual Clock Set". If you press MENU after the clock has been set, the Brand Set screen CABLE 80X 8RARD SET list, then press OK or l>. box, or [] Access MainMenuscreen,thenInitialSetscreenonVCR [] Selectoutputchannel Enterbrandcodeandperformtest Press the appropriate Number keys on the Remote to enter the brand code from the appears. CABLE BOX BRAND CODE ARCHER CABLETENNA CABLEVIEW CITIZEN CURTIS DIAMOND GC BRAND GEMINI GENERAL INSTRUMENTS HAMLIN JASCO IERROLD NOVAVISION OAK PANASONIC PULSER RCA REGAL REMBRANDT SAMSUNG SCIENTIFIC ATLANTA SIGMA SL MARX SPRUCER STARGATE TELFVIEW TOCOM UNIKA UNIVERSAL VIDEOWAY ZENITH 1,5,17 1,17 15,16.17,2L25 15,16,17,2L25 Z8 1,17 15,16,17,2L25 15 L4,6,11,1Z15,28 10, l& 23 15 1,4,6,11,1Z15,28 Z8 7,20 13, 14 15,16.17,21,25 13, 14 10, l& 23 1,16,17 5, 16,24 Z8 7,20 5, 16, 17, 24, 25 13, 14 5, 15, 16, 17, 21, 24, 25 5, 16,24 b4,16 L17 16, 17, 25 3, 9, 22 3, 9, 22 DBS RECEIVER BRAND cODE DBS RECEIVEr BRAND CODE JVC(DISH Net\yolk) E(-HOSTAR (DISH Network) 51 51 SONY (DSS) RCA(DSS) 41 40 For cable box • If the cable box's channel changes to 9, setting is (omplete. Press OK. CAGLE GOXGRAND SET 1 IO YONR CABLE BOX • If the cable box's channel does not CHANGET_NELOG? change to 9; BO [] Press ,/_,_7 to move the highlight bar (arrow) to "NO", then press OK or L>. [] Repeat step [] until the cable box's channel changes to 9 by entering another code. [] If the channel does not change after going through all the code numbers listed for your model of cable box, then try all the other numbers. For DBS receiver DBS RECEIVER GNAND SET • If the DBS receiver's the channel setting listed below for your brand, is complete. Press OK or [>. JVC -'_ 100 SONY "+ 205 ECHOSTAR -'_ 205 RCA • If the DBS receiver's channel change as shown [] [] --8-- chamEel changes to 51 GIUVGNR_GSUEGEIVER CHANGET_NEL2GG? BO "+205 does not above; Press ,/_V to move press OK or [". Repeat step []. the highlight bar (arrow) to "NO", then I •l"VOH+ "_0 _ BasicPlayback Reverse Turn on mode). [] the VCR and TV, and select the VCR channel :eveise Loada cassette Make _ sure the window "TVCH _ Forwal d (or AV Reverse _earc_ " I sePsI side )la_,' I Reverse sl)w S[°\v i:)t[ 'l :in m_ Norma _n , I psI s°PsI Ill F°iwarc_ )la_' I ,' _earch , I s0ps I is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. • Do not apply too much pressure when inserting. • The VCR turns on, and the (ounter on the on-s( reen display is reset, automatically. • If the cassette's record safety tab has been removed, playback begins automatk ally. Press REW (41-,91) or FF (1_1_). Press STOP/EJECT (ll t_---). • You can also eject the cassette [] Startplayback Press OR Turn the JOG dial Or right. when to the left the VCR is turned off. PLAY (1_). • The S-VHS indicator lights up when you play hack a tape recorded in S-VHS mode or in S-VHS ET mode (L<_"pg. I 1 ). Press POWER _/L Playback Features PressstOP (m)on the OR PressSTOP/EJECT(II !A/on Press or Remote. Turn on the VCR and TV, and select mode). (or AV the VCR. PAUSE (11)_ • Press PLAY I_) to resume normal playback, Push the JOG Adjusting trackingcondition - Tracking Adjustment diah • Push the JOG dial again resume norma! playback. to Automatic tracking adjustment Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optinlum picture quality during playback. Manual tracking adjustment If automatic tracking cannot eliminate noises well during playback, follow the procedures below. NOTE: During screen. the VCR channel still picture, vertical vibration may appear on the 7V Press CH+/on the Remote to _et a clearer picture. Press PAUSE (ll) to pause, then press 14141 or I_l_[ or PAUSE (I I)) iepeated!y, • Press pLAY (l_) to resume normal playbackl OR Push the JOG dial to pause, then turn the JOG dial to the left Or iight. O Push the JOG d!al again to resume normal playback. On the Remote [] Press SP/EP during [] Press CH +/- playback to eliminate to activate the noises. manual tracking. Press it briefly for a fine adjustment, or press and hold for a coarse adjustment. • Press SP/EP again to rea(tivate automatic tracking. Press REW (4141) or FF OR Turn the JOG dial qu!ck!y to (1_1_). the !eft or righ L • Press PLAY (1_)to resume non'hal playback. • If you press and hoId REW (41-,91) or FE (1_1_) for more than 2 seconds, simply releasing !t cancels the p!cture search, and normal playback resumes. Press 14141 or I_1_1 repeatedly• OR [um the JOG Or right. Selectingmonitorsound - AudioMonitor While playing back a tape on whi(h stere() sound or SAP sound is recorded, press A.MONITOR on the Remote. Each time you press the button, sound changes. HI-FI: Normally select this. Hi-Fi sound is played hack. dial to the left HI-FI L: Sound on HI-FI R: Sound on NORM: Sound on NORM HI-FI: Both • Press PLAY (P")to resume normal playback. • Each time you press 141_1 or 1•41_1or each time JOG dial passes a dick position, the playback speed changes.To decrease the speed during picture search, press the opposite direction button repeatedly or turn the diai in the opposite direction. • During stil! picture, press and hold I_!l_l to start fopward (or !4!41 to start reverse) slow motion playback. When you release the button, still picture resumes. During still picture, holding PAUSE (11) for more than 2 seconds also starts forward slow motion playback. During slow Press CH+/- If you motion, some on the Remote press PAUSE (!l) again, mixed and played the left Hi-Fi channel is played back. the right Hi-Fi channel is played hack. the normal track is played hack. sounds on the Hi-Fi track and normal track are back. NOTE: 7he above indication appears when "SUPFRIMPOSF" "ON" (z_:" p_. 1 _), though the monitor sound changes is set to in sequence, stil ! picture noise may appear on the T V screen. to eliminate the noise. CONTINUED --9-- ON NEXT PAGE Automaticoperationsafter rewinding - Next FunctionMemory Locatingbeginningof timer recordings - Instant Review The Next Fun< tion Memory "tells" tile VCR what to do after rewinding is complete. Ensure that the VCR is in stop mode. • For Automatic Playback Start Press REW ('_l_l), then press PLAY (11_) within 2 se< onds. • For Automatic Power Off After ensuring that the VCR is turned off and that the timer mode is disengaged, press REVIEW. • The VCR turns on, and rewinds to the index code indi< ating the beginning of the last timer-re¢ orded program, then begins playback automatically. • You can a(cess a program of 2 to 9 index codes away from the current position on the tape. If, for example, you have 5 programs recorded and you want to watch the third one, press REVIEW three times. Press REW ('_l_l), then press POWER _/I within 2 seconds. • For Automatic Timer Standby Press REW ('_14), then press TIMER within 2 se< onds. NOTE: It is not possible to select the Automatic f_mer .Standby the cassette_ record safety tab is removed. function if Locatingbeginningof recordings IndexSearch [] While the tape is not running, press SHUTTLE on the Remote to start search. [] ]b access a recording of ea) on the display panel starts blinking slowly. ib stop playback, press STOP (I) on the Remote or STOP/ElECT (I/m) on the VCR. Index _odes are placed on the tape at the beginning re< ording when re< ording on this VCR. Review Skipping unwantedportions - SkipSearch Playingbacktaperepeatedly(100 times) - RepeatPlay - • The Instant turned on. 3 --10-- I Recording Features Turn on the VCR and TV, and select the VCR channel [t may be unlawful to record or play back copyrighted without the consent of the copyright owner. material Accidental erasure prevention To prevent accidental recording on a recorded cassette, remove its record Specifyingrecordinglength - InstantTimerRecording(ITR) safety tab. To record on it later, cover the hole with adhesive tape. During recording, press REC (0) on the VCR repeatedly until the recording length you want appears on the display panel. The Record safety tab record indicator (_) on the display panel starts blinking. • Each time you press the button, recording length increases 30-minute intervals (up to 6 hours). • The VCR shuts off after recording is finished. BasicRecording Turn on the VCR an(] TV, an(] select the VCR channel ]or AV • To cancel an ITR, press STOP (11) on the Remote (ll/m-) on the VCR. nlode). [] safety tab is intact. If not, cover inserting the cassette. • The VCR turns on, and the counter reset, automatically. on the on-screen display During re_ording... • [f you connect the TV and the VCR only is panel, to view the tape speed will appear on the TV screen. NOTE: You can select pause r'node, • If you are using the AV connection (_ 7 ° pg. 5) to view pictures from the VCR, change the TV's input mode from AV to IV. Then, select the channel you want to watch, on the TV. SecondAudioRecording Settapespeed Press SP/EP. The selected using the RF connection (_ 7" pg. 5) to view pictures from the VCR, press TV/ VCR on the Remote so that VCR mode indicator goes off from the display paneh ([he TV broadcast being recorded disappears.) Selectrecording channel VCR mode indicator lights on the display program to be recorded. [] or STOP/ElECT Watchingoneprogramwhilerecordinganother the hole with Press CH+/or the Number keys on the Remote. Or push the JOG dial, then turn it to the left or right. • If you connect the TV and the VCR only using the RF connection (_-7_ pg. 5), press TV/VCR on the Remote so that the [] in Loada cassette Make sure the record adhesive tape before [] !or AV mode). tape speed in the stop mode or during re_ ording S-VHS(SuperVHS), S-VHSETor VHS Recording Startrecording On the VCR, press REC (0). (0), press PLAY (1_). This VCR's built-in MTS decoder enables reception of Multichannel TV Sound broadcast. To record a SAP program receive(], set "2ND AUDIO RECORD" to "ON" (_7 ° pg. 15). Or on the Remote, while holding REC Mode ]his VCR can record in S-VHS {Super VHS), • To record in S-VHS: NOTE: If "VIDPO (_d3BRATION" is set to "ON" (_ 7_ pg. 15) (default setting), the VCR takes about 7 second5 to assess the quality of the tape in use, then recording begins with the picture level optimized, S-VHS ET or VHS. Set "S-VHS MODE" to "ON" (_8 _ pg. 16). Then, insert a cassette marked "S-VHS". The S-VHS indicator lights up on the display panel. The S-VHS recording mode is selected. • To record in S-VHS ET on a VHS cassette: Set "S-VHS ET" to "ON" (_ 7: pg. 1 5). [hen, insert a _assette marked "VHS". The S-VHS indicator lights up on the display Press PAUSE (11). • Press PLAY (11_) to resume recording. • You can select channel in the recording Press STOP ill) Remote. on the OR panel. • To record in VHS: Insert a cassette marked pause mode. Press STOP/EJECT the VCR. (11 t_.) Insert a cassette marked "S-VHS". [he S-VHS indicator lights up on the display panel. Then, set "S-VHS MODE" to "OFF" ]_7 _ pg. 16). The S-VHS indicator goes off. on The VHS recording mode is selected. NOTE: NOTE: If the tape reaches it5 end during recording, the re_ ording stops and "0" and "[:>" on the display panel blink. Press STOP/EJECT (11 /Am) on the VCR to eject the cassette or press REW (_91) on the Remote "VHS". Set "S-VHS ET" to "OFF" (z:7_ pg. 15). • To record in VHS oil an S-VHS cassette: to rewind the tape. --11 When playing back a tape that has been re_ orded in S-VHS or S- VHS EI, the S- VHS indicator light_ up on the display panel regardless of the "S-VHS EI" (_7 pg. 1_) or "S-VHS MODE" (ZT: pg. 16) setting. -- VCRPlus+ ®TimerPrograming I TimerRecording ]he PlusCode programing numbers are the numbers next to the program in most TV listing. Load a cassette with the record safety tab intact. The VCR turns on, and the Up to 8 timer recording programs can be made using VCR Plus+ timer programing, Express timer programing or 24HR Quick Programing method as far as a year in advance. Remember, the clock must be set before you can program the timer. Turn on the VCR and TV, and select nlode). the VCR channel counter [] (or AV ,,t@ is reset, automatically. Press PROG. on the Remote to access the PlusCode PLUSCODE No. screen. NO. NOTES: • If all the 8 prograEns have already been set, "PROGRAM FULL" appears on the TV screen. • After timer recording is completed, the VCR turns off a u toma tic ally. • You +an program the timer recording while a regular recording is in progress; the menu screens will not be re( orded. • To timer-record cable or satellite (hannels, perform "(i_ble Box and/or DBS Receiver Control Setting" (_ _" pg. 7) and be sure to kee I) the cable box or DBS receiver turned on. • Ever) ifa power failure o_urs, the VCR keeps your timer programs. Howeve); the ok)ok time, channel settings, and other menu settings are lost. As a result, when the power is supplied again to this VCR after the power failure, this VCR start__ the Plug&Play setting automatically to restore the ck)( k time and ( hannel setting. If the clock time and channel setting are restored correctly, each timer program you have made will start at it5 start time unless it5 end time has elapsed. • If the tape reaches it5 end during timer recording, the recording stops and "Q" "0 " and "L>" on the dispby panel blink. Press TIMER to disengage time), then press STOP/EJECT (11/Am) on the VCR to eject the cassette or press POWER cp/[ then press REW (_1..I12 on the Remote to rewind the tape. [] the setting 1O:0OPM CH SP 12 GUIDECHANNDLGDT cable box, then press OK. • ]b set the tape speed, press SP/ER • ]b change the stop time, press STOP+/-. • ]b timer-record daily (MondapFriday) or weekly serials, press DALLY (M-F) (Number key "8") or WEEKLY (Number key "9"). Pressing the button again makes the "DAllY" or "WEEKLY" display disappear. • If you made a mistake, press CANCEL to access the PI usCode No. screen again. • If an incorrect PlusCode number or the one for a broadcast already finished has been inputted, "ERROR" is displayed for about 5 seconds, then the PlusCode No. screen reappears. station's steps to [] Press OK or PROG.. • If "PROGRAM AccessMainMenuscreen,then Initial Set screen [] bar NOT see "Program COMPLETED overlap PROGRAM warning OVERLAP" display" Press TIMER. The VCR turns off automatically displayed on the display panel. (_" and "(_)" pg. 14). is Access GuideChannelSetscreen Press _V CHANNEL [] + • If the Guide Channel Set screen appears after pressing OK, press the Number keys, CH+/or _V to input the number of the channel on which the broadcast for the PlusCode number is received on the VCR or appears, [] screen. 8:O0PM Most TV listings have a section, usually a chart, indicating the guide channel numbers assigned to each station. To ensure that VCR Plus+ timer recording operates correctly, it is necessary to set the VCR Plus+ "Guide Channel Set" for each station. Press MENU on the Remote. Press _V to move the highlight (arrow) to "INEEIAL SET", then press OK or _>. on the Program NO. DATE 12/24/03 WED The VCR Plus+ programing system assigns a VCR Plus+ guide channel to the TV channels and the cable channels. These guide channel numbers are also called the VCR Plus+ channel codes. [] is accurate PLUSCODE ChangingVCRPlus+®Setting If you have moved to a different area or if a broadcasting channel number has been changed, perform the following set the correct guide channel number. Press the appropriate Number keys to input the PlusCode number, then press OK or b>. Check to make sure to move the highlight bar (arrow) SET", then press OK or P*. Inputguidechannel number Press ,/_,V or the Number to "GUIDE GU,DDDGANND[GD, keys to select the VCR Plus+ guide channel number as shown in the TV listing, then press OK or _>. [] Inputreceiving channel number GUIDE CHANNEL SET Press _V or the Number keys to select the number of the channel on which the guide channel's broadcasts are received, then press OK or _>. • Repeat steps 1_1and L_lfor each instance. [] Returnto normalscreen Press MENU on the Remote. CONTINUED 12 ON NEXT PAGE ExpressTimerPrograming NOTES: Load a cassette with the re_ord safety tab intact. on, and the counter is reset, automatically. [] Press PROG. [] Press START+/Progra nl on the Remote to a((ess The VCR turns the PlusCode once to access No. screen. PROGRAM1 s_ reerl. START Press START+/-, STOP+/-, DATE+/- or _ DATE CH+/repeatedly to enter the start time, stop time, (]ate or channel. • Press and hold START+/or STOP+/to increase the time in 30-minute intervals. STOP [] CH _ _ • Fbr 24HR Quick Programing function, the program overlap warning display does not appear even if some programs overlap each other, lk'_J TousetheVCRwhileit is in timer recordingstandby • To set the tape speed, press SP/EP. • To timer-re( or(/daily (Monday-Friday) or weekly serials, press DAILY (M-F) (Number key "8") or WEEKLY (Number key "9"). Pressing the button again makes the "DAllY" or "WEEKLY" display disappear. • If you are using a DBS receiver an(] PROGRAM 1 "DBS RECEIVER SET" is set to "ON', START STOP the band indi( ation appears under _ DATE [] CH the " starts blinking [] PROGRAMon on the display [] 12/24 12/25 12/25 STOP DATE R START CH Returnto normalscreen CHECK repeatedly until no Program screen is Reengage timerrecording standbymode Press TIMER. The V(_:R turns off automatically and "Q" is displayed on the display panel. • When "AUTO TIMER" is set to "ON" (_-_ pg. 15), the timer recording standby mode automatically resumes when you turn off the VCR. theVCR. panel. Turn the JOG dial to the left or right to set the start time. 10:00 12 10:45 40 1:00 125 To cancel a program, press CANCEL when the Program screen you do not want is shown. To change a program, press the appropriate button: START+/-, STOP+/-, DATE+/-, CH+/-, DAILY (M-E) (Number key "8"), WEEKLY (Number key "9"), and/or SP/EP when the Program screen on which you want to make changes is shown. 24HR QuickPrograming [] S:O0P 1O:0OA 11:3OP [] Cancel or change programsetting (L_ ° pg. 14). and "(_)" 1 2 CHECK. Press PROG. CHECK again. Each time you press PROG. CHECK, the next program's Program screen appears. OVERLAP" display" Press TIMER. The VCR turns off automatically displayed on the display panel. (Z_:" pg. 15), you do not [] Access Programscreen through Press OK or PROG.. • If "PROGRAM POWER d_/L is set to "ON" [] Access ProgramCheckscreen Press PROG. BOX If the channel number entered reEtuires that the band be set and "7=DBS" is displayed on the s( reen, press DBS (Number key "7") to select "DBS". [] Disengage timer Press TIMER, then press • When "AUTO TIMER" have to press TIMER. Receiver Control Setting" (L_ ° pg. 7).) TV: lo timer-record a regular TV broadcast received on the VCR. CATV: Ib timer-record a cable TV broadcast DBS: • If "IW" appears on the display panel, repeat the above st_ps again. • When a menu sDreen is shown, you cannot use 24HR Quick Programing function. Press MENU to return to nom}al screen, and try again. • You can use 24HR Quick PrograD'ning fdnction also when the VCR is turned off. -e_ Start time • One click stop of the JOG dial changes the time in 5-minute intervals. [] [] Push the lOG dial. "(_" starts blinking on the display panel. Turn the JOG dial to the left or right to set the stop time. • To set the tape speed, press SP/EP. The current setting for the tape speed appears on the display panel for about 5 seconds. Press SP/EP again to change the setting while tape speed is displayed. Push the lOG Stop tim_ _ _, Channel number dial. Turn the JOG dial to the left or right to select the channel, then press 24HR QUICK PROGRAM. The VCR turns off automatically and "(_)" is displayed on the display panel. CONTINUED --13-- ON NEXT PAGE Programoverlapwarningdisplay If "PROGRAM NOT COMPLETED PROGRAM [ OtherFunctions OVERLAP" appears, you have another program overlapping the program have just made. The Program Check screen appears and ( onflicting programs will start blinking. you Timerwarningdisplay A warning appears on the TV screen to tell -WARNINGTIMER RECORDING you thatthe timer-recording is to startin TOSTARTGOON (CANCEL) 5 nfinutes if you are not in the timer re_ ording standby mode at that time. Press TIMER to put the VCR into timer re_ ording standby mode. IZ_ clear the display, press CANCEL on the Remote. PROGRAM NOTOOMPLETOD PROGRAM OVERLAP Checking tape position Example: Program 1 (you have just made) and Program 4 overlap each other [] Selectprogramtomodify PR OTAOT Gr0P CROAT0. 1 O:OOP 10:00 12 10/24 _ Press _V, o 10:S0A10:45 40 10/20" overlapping then press OK or _. programs. " • If you do not mind this overlap, press PR OG. to f i n i s h th e ti m er prog ra m setting. The program starting earlier or program with the lower program number will To cancel a program, press CANCEL the Program screen you do not want OROGOAM4 when is START O:00PM OAT0 _ 12/24/03 WED shown. STOP CH 10:OOPM 10 +-=-+--= +-_r-- E l:oo REMA[H _ 1:23:45 COUNT or "E" (End) Changing displayinformation Ea. .... appears. The position of ,,11,,in relation to "B" (Beginning) shows you where you are on the tape. • Set "SUPERIMPOSE" to "ON" (ZT_ pg. 1 5). be re< orded. [] Cancel or change programselling When you change the VCR operation mode from the stop mode to fast forward or rewind mode, or when you perform an Index Search (_-_ pg. I 0) or Instant Review (_-_ pg. I 0), the tape position indicator SP/EP when the . [] SelectFunction Press ,/_V to move the highlight want to set. FUNCTION PICTURE GOHTROL VIDEO GAUBRATIOH AUTO TIMER SUPERIMPOSE bar (arrow) PREVIOUS PAGE AUTO ON OFF ON to the function you PREVIOUSPAGEPREVIOUS PAGE 2ND AUDIO RECORD BLUE AUD OBASK MOH TOR bS.VHG MODE NExTAV COMPU-UNRpAGE OFF _ROAR HON -F ON I_ OH t_g_C AUXINPUT VIDEO T [] Changesetting Press OKor _>. The default MENU to return to normal After a power failure its default setting. setting is bold in the table below. screen. occurs, Function Settings CONTINUED --14-- will be reset ON Press to NEXTPAGE • S-VHSET-- ON/OFF • When this function is set to "ON", you _an record on VHS cassettes with S-VHS picture quality. Tapes recorded using this function can be played back on most S-VHS VCRs or VHS VCRs equipped with the S-VHS ET function or VHS VCR equipped with the SQPB (S-VHS QUASI PLAYBACK) function. When When this function is set to "ON", on the display panel. the S-VHS indicator lights SUPERIMPOSE-- ON/OFF this function (on-screen display) is set to "ON", appears w/rious VCR status information on the screen. NOTE: When you use this VCR a_ the playba( k VCR for editing a tape, be sure to set this function to "OFF';" otherwise, the VCR status information (on-s( reen dispby) will be recorded on the edited up tape. NOTES: • Before recording, set "VIDEO (?_LIBRATION" to "ON'. (_° See below) • You cannot activate the S-VHS ET function while re(ording • AUTOSP-,-EPTIMER-- ON/OFF When this function is set to "ON', the VCR automatically switches to EP mode to allow complete recording if there is not enough tape to record the entire program while timer-recording in SP mode. (_-_" pg. 77), time_recording (___ pg. 72) or Inst, mt lTmer Re( ording (_ _ log. 7 72or &e "VIDFO (>,LIBRATION" function (_-_" See below) is in progress. • lhe S-VHS EI function does not work with S-VHS cassettes. • Po kee I) the highest quality over a long period of time, is recommended. • Use of high grade re_ording andplayback pictures S- VHS recording on S- VHS cassettes tapes is recommended for S-VHS Recording a 120-minute tape Approximately I ET recordings. On some tapes, picture quality will not improve even if the S-VHS EI function is used. Check the recording quality before you start itr_portant re( ordings. • For Example, a program of 140 minutes 110 minutes SP mode in length Approximately J onto 30 minutes FP mode J NOTES: • If you have programed the VCR to timer-re(ord 2 or more programs, do not use this function, but change the tape speed manually during timer programing. • lhere may be some noise and sound disturbance where the tape speed swit( hes from SP to EP mode on the tape. • 7his function is not available during ITR (Instant 7Truer Recording), and will not work properly on the following tapes: 7(ST2-30, 7(ST2-60, 7(5T)-90, and 7(ST)-720. VIDEOCALIBRATION-- ON/OFF When this function is set to "ON', this VCR che_ks the _ondition of the tape in use during playback and recording, and compensates to provide the highest-possible pictures. This takes place whenever you play back a tape or start recording after inserting a tape. NOTE: • VIDEOSTABILIZER -- ON/OFF 7_e VCR checks _e _pe con_tion for about 7 seconds, _en starts recording. lb make sure you record the desired s( ene or program completely, perform &e following steps: When this function is set to "ON', you can automatically corre(t vertical vibrations in the picture when playing back unstable recordings made on another VCR. [] Press and hold PAUSE (11), and press REC (Q). After 7 seconds, the VCR re-enters Record Pause mode. NOTE: [] Press PLAY (11_) to start recording. To wat( h re( ordings with ( lose-( aption or when viewing a tape, set this function to "OFF". • PICTURECONTROL-- AUTO(NORM)/EDIT/S0FT/SHARP • BLUEBACK-- ON/OFF about This function helps you to adjust the playback picture quality according to your preference. AUTO (NORM): Normally select this. Picture quality is adjusted automatically. When "VIDEO CAHBRATION" is "OFF", "NORM" will appear instead of"AUTO". EDIT: Minimizes picture degradation during editing (recording and playback). SOFT: Reduces image coarseness when viewing overplayed tapes containing much noise. SHARP: Clearer, sharper-edged picture when viewing images with much flat, same-colored surfaces such as cartoons. NOTE: Sele( t "EDIT" when you are editing the tapes, sele( t "AUTO". tapes. After you finish When when this function is set to "ON", the TV screen becomes receiving a channel not in use. When you want set this function to re( eive an unstable to "OFF". ( hannel with • When this function the SAP audio is recorded on both [he main audio is not recorded. the main audio is set to "OFF", NOTE: When the ( hannel is _hanged on the VCR; • 7he "STFREO" indi(ation appears on the screen You have to press TIMER to engage recording standby mode. or disengage is recorded the SAP audio • AUTOTIMER-- ON/OFF The timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER to engage or disengage the timer recording standby mode. • When this fundion is set to "OFF": signals, is set to "ON"; If a SAP program is received, the normal and Hi-Fi tracks. • When this function recorded. is set to "ON": poor • 2NDAUDIORECORD -- ON/OFF • When this function all blue NOTE: If a non-SAP program is receive((, both the Hi-Fi and normal tracks. editing you finish cannot on be for about 5 second,s if the program is a stereo broad(ast. • 7he "SAP" indication appears on the screen for about 5 seconds if the prr)gram is a SAP broad( ast. • Both indicatk)ns appear when a stere() program is accompanied by SAP sound. the timer CONTINUED --15-- ON NEXT PAGE • AUDIOMONITOR-- HI-FI/HI-FI UHI-FI R/NORM/MIX • FRONTAUX INPUT -- VIDE0/S-VIDE0 This VCR can record two sound tracks simultaneously (normal and Hi-Fi) on a Hi-Fi stere() tape. You can select the sound track(s) to listen to while playing back a Hi-Fi stereo tape. In addition, when playing back a prerecorded tape containing two separate audio programs on the Hi-Fi tracks, you can choose either one by selecting either "HI-FI I" or "HI-FI R'. HI-R: Normally select this. Hi-Fi sound is played back. HI-FI L: Sound on the left Hi-Fi channel is played back. HI-FI R: Sound on the right Hi-Fi channel is played back. NORM: Sound on the normal track is played back. MIX: Both sounds on the Hi-Fi track and normal track are mixed You have to select which terminal either VIDEO S-VIDEO (Y/C separate signals) to use as the video on the front panel. Make sure to select the correct terminal; otherwise, recording (editing) on this VCR. and played Make sure you select in recording (editing) back. NOTES: • While playing back a monaural tape, soun(Ls on the nom_al track will be heard reganlless of this setting. • If RF connection (_ pg. _2 is used for viewing pictures on the TV, sound will be monaural even • You can al_o use the A.MONITOR select the desired monitor sound. you may fail in REARALIXINPUT -- VIDEO/S-VIDE0 You have to select which terminal -- either VIDEO S-VIDEO (Y/C separate signals) to use as the video on the rear panel. the correct terminal; on this VCR. (composite) or input terminal otherwise, you may fail SatelliteAutoRecording You can automati(ally record a satellite programed on your DBS receiver. though you select "H!-FI". button on the Remote to (_-_" pg. 92 Turn on the VCR and TV, and select mode). • S-VHSMODE-- 0H/OFF You can or VHS • When tapes • When tapes • (composite) or input terminal [] determine which recording mode -- either S-VHS mode nrode -- is use(] for recording on S-VHS tapes. this function is set to "ON", you can record on S-VHS with S-VHS picture quality. this function is set to "OFF", you can record on S-VHS with VHS picture quality. Con nect a DBS receiver program which the VCR channel is timer- to the AU DIO/V] D EO IN or S-V] DEO ] N connectors* on the rear panel. box if it has a timer. You can also connect the (:able * To use these donne(tots, y_u have to select which one to use. I abow', "REAR AUX INPUT".) NOTES: • S-VHS mode allows you to make high quality video recordings with horizontal resolutk)n of 400 lines, comparing with the 2_0 lines of resolution of conventional VHS recordings. To achieve the highest quality picture we recommended to record in S-VHS mode. (But remember that a conventional VHS VCR without SQPB cannot play back S-VHS tapes recorded in S-VHS mode.) • S-VHS MODE setting does not affect recording on VHS tapes. Recording on VHS tapes is always performed in VHS mode except when using S-VHS ET mode (_Z _ pg. ! _2. [] Set timer manuah [] Load a cassette [] Press SP/EP to set the tape speed. lhe appear on the TV screen. [] program on DBS receiver with the record Press REC LINK for more automatically mode ("[.-1" / J (or AV referring See to its instruction safety tab intact. selected than 2 seconds. tape speed will The VCR turns off and enter the Satellite Auto Recording and "Q" light up). When signals come standby into the VCR from the DBS receiver, the VCR starts recording ("Q" arid "O" light up and "1-1" blinks). When no signals come into the VCR, the VCR stops recording ("O" goes off). NOTES: • Be sure not to turn on the DBS receiver before the program start.s broadcasting; otherwise, the VCR will start recording when the DBS receiver is turned on. • AVCOMPU-LINI( -- 0H/0FF The remote PAUSE/AV COMPUL]NK ternfinal on the rear panel can be used as either the remote PAUSE terminal or the AV COMPULINK terminah • When this function is set to "ON", you can use this the AV COMPUI INK terminal By connecting other COMPUHNK components, including amplifiers (or and televisions, one touch control of the audio and tenninal as JVC's AV receivers) video components linked via their AV COMPUHNK connectors becomes possible. • When this function is set to "OFF", you can use this terminal as the remote PAUSE terminal. If your JVC c amcorder is equipped with the Master Edit Control, you can control the VCR from the c am(order. Connect the mini-plug cable (not supplied with this VCR) between the remote PAUSE terminal and the EDIT connector on the camcorder. NOTE: Refer to the other component.," instruction manuals for connection and it_ operations. • To disengage the Satellite Auto Recording standby mode, press REC LINK ("®" goes off). • Depending on the type of satellite receiver, Satellite Auto Recording may not be compatible. ChildLock Turn on the VCR and TV, and select mode). the VCR channel (or AV You can disable the VCR operations. While the VCR is turned on, press and hold POWER _/I on the Remote for more than 10 seconds. The VCR turns off, "CL" appears for about 5 seconds on the display panel. To release the child lock, press and hold POWER _/I on the Remote until the VCR turns on. NOTES: • Pressing TIMER during timer recording, unplugging the A( power cord or a power outage also releases the child lock. • Even if the child lock function is in use, it is possible to engage and disengage the timer mode with TIMER (Q) on the Remote. Keep the Remote out of the children's reach. • T_mer re(ording programs will be perforated lock function is activated. CONTINUED --16-- even if the child ON NEXTPAGE / J Multi-Brand Remote Control This Remote carl control some functions of remote controllable TVs, cable boxes or DBS (Direct Broadcast Satellite) receivers listed below. Without setting, you can control a IVC TV. NOTES: • Some unit_ brand5 have more than one _ode. If the unit not function with a specified _ ode, try other codes, • Depending on the type of unit, some or all functions operated using this Remote, • It is not possible to operate a unit not equipped with ser) does cannot be a remote sotq • It is not possible to set the Remote DBS receiver at the same time, for both your cable box and a • Once you have set the Remote to operate the unit, )/ou do not have to set it until you replace the batteries from the Remote, • If the batteries of the Remote are discharged, the Remote may not be able to control the TV, cable box or DBS receiver, Replace the batteries, W BrandSetting [] Turn onTV Turn on the TV using the Power [] button on the TV or its Remote. SetTV brandcode [] [] Press and hold TV. Press MBR SET. [] [] Press the Number keys to enter your TV's brand code. Press OK, and release TV. [he TV should turn off. [] OperateTV While holding down TV, press one POWER c9/1, TV/VCR, TV CH+/-, and the Number keys, • For some brands, you must press Number keys to enter a channel of the following buttons: _/q_ (TV Muting), TV VOL+/-, ENTER after having number. pressed the CABLE BOX BRAND CODE ARCHER CABLETENNA CABI.EVIEW CITIZEN OJRTIS DIAMOND GC BRAND GEMINI GENERAL INSTRUMENTS HAMI J N JASCO JERROI D NOVAVISION OAK PANASONIC PULSER RCA REGAL REMBRANDT SAMSUNG SCIENTIFIC ATLAN1A SIGMA SL MARX SPRUCER STARGATE TEl EVIEW T(:)COM UNIKA UNIVERSAL V IDE(:)WAY ZENITH 01,05, 17 01, 17 15,16,17,21,25 15,16,17,21,25 02 01, 17 15,16,17,21,25 15 01,04, 06, 11, 12, 15,28 10, 18, 23 15 01,04, 06, 11, 12, 15,28 O2 O7 13, 14 15,16,17,21,25 13, 14 10, 18, 23 01, 16, 17 05,16,24 O2 O7 05,16,17,24,25 13, 14 05, 15, 16, 17,21,24,25 05,16,24 01,04, 16 01, 17 16,17,25 03, 09, 22 03, 09, 22 DBS RECEIVER BRAND CODE IVC (DISH Network) ECHOSTAR (DISH Network) SONY (DSS) RCA (DSS) 51 51 41 4O TV BRAND CODE TV BRAND CODE Changing RemoteControlCode JVC HITACHI MAGNAVOX MITSUBISHI 01,03 10 02 03 SONY SAMSUNG SANYO SEARS 07 12 13 13 This Remote is capable of transmitting two control codes; one set to respond to A code control signals and another set to respond to B code control signals, This Remote control is preset to send A PANASONIC RCA SHARP 04, 11 05 06 TOSHIBA ZENITH 08 09 code signals because your VCR is initially set to respond to A code signals. You can easily modify your VCR and the Remote to respond to B code signals. When using two JVC VCRs, set two VCRs and their Remotes to different operate these VCRs separately. CableBoxor DBSReceiverBrandSetting Turn on the VCR and TV, and select nlode). [] Press and hold CABLE/DBS. Press MBR SET. [] Press the Number keys to enter your cable receiver's) bran(:] code, Press OK, and release CABLE/DBS. [] Press and hold A/B. button B code control signals. [] Checkremotecontrolcodefor VCR on Press and hold VCR is turned Enterbrandcode [] [] [] [] (or AV [] Press the Number key "2". [] Press OK, and release A/B. • The Remote now can transmit using the Power so that you can [] Setremotecontrolcodefor Remote Turnoncablebox or DBSreceiver Turn on the cable box or DBS receiver the unit or its Remote. [] the VCR channel codes, I_ on the VCR for more than off. ]he code currently 5 seconds set appears while the on the display panel. [] Changecodefor VCR box's (or DBS Press any key on the Remote. 1he VCR now responds control signals, • To set the Remote and the VCR back repeat the same procedure as shown Number key "1" in step [] of IBI. Operatecablebox or DBSreceiver While holding down CABLE/DBS, press one of the following buttons: POWER _/1, TV CH+/-, and the Number keys. • For some brands, you must press ENTER after having pressed the Number keys to enter a channel number. • lb change the cable box's (or DBS receiver's) channels, press TV CH+/or the Number keys, (The CH+/button can be used to change the VCR's channels only.) to B code to A code control signals, above except pressing the Tocontroltwo VCRswith the sameRemote You can control two IVC VCRs by switching the remote control code for the Remote between A and B ( " step IBI), keeping two VCRs to different control codes. • To change only the remote control NOT perform steps [] and [], 17 code for the Remote, DO Example 3: When another VCR is S-VHS VCR and when using this VCR as the recording VCR I Editing Editingwith AnotherVCR You (an use your VCR as the playback or recording VCR. You carl use a camcorder as the playback VCR and your VCR as the recording VCR. Refer also to the other components' instruction manuals for connection and its operations. [] To AUDIO input t t To SWIDEO t input Makeconnections Example 1: When another Audio VCR is VHS VCR ca_ S-video c:able (supplied) ToAUDIO/VIDEOIN t t To AUDIO/VIDEO t OUT (not T° audi° A/hen using this VCR as the recording VCR, connect this VCR's AUDIO/VIDEO IN connectors to the When using this VCR as the playback VCR, connect this VCR's AUDIO/VIDEO OUT connectors to the audio/video connectors VCR. audio/video input con nectars on another VCR. output on another [] suppli_ °utput _lr _!" To S-video output _lr Loadcassettes Insert the playback cassette into the playback (assette to be recorded on into the recording VCR and the VCR. [] Selectinputmodeonrecording VCR To audio/videooutput • If another ,_ VCR is monaural, OUT) connector another VCR. ,_ ,_ connect to the audio output To audio/video this VCR's AUDIO (or input) connector input I IN (or on Select the correct external input on the recording VCR. On this VCR (when using this VCR as the recording VCR); Sele(t "E-1" -- when connecting the other VCR to the audio/video (or S-video) input _onne_tors on the rear panel. Sele(t "F-1" -- when connecting the other VCR to the audio/video (or S-video) input connectors on the front panel. Press AUX or CH+/-on the Remote. Or push the lOG dial, then turn it to the left or right. [] Selectvideoinputconnector anrecording VCR When using this VCR as the recording VCR, select the appropriate mode depending on the _onne(tor being used (_" pg. 16). When using S-VIDEO input connector on the front panel, set "FRONT AUX INPUT" to "S-VIDEO". Example 2: When another VCR is S-VHS VCR and when using this VCR as the playback VCR When using S-VIDEO IN connector AUX INPUT" to "S-VIDEO". ToAUDIOOUT t t t on the rear pane[, When using VIDEO input connector "FRONT AUX INPUT" to "VIDEO". To SWIDEO OUT When using VIDEO IN connector AUX INPUT" to "VIDEO'. on the front set "REAR panel, set on the rear pane[, set "REAR [] Selecteditmode Audio cac_1 _ _ Set the edit mode to "ON" Swideo cable /supplied} _r equipped. • On this VCR, set "PICTURE the VCRs if such a mode CONTROl." to "EDIT" is (_° pg. 15). [] Startplayback Press PLAY (1_) on the playback VCR. (not suppli_ [] Slarl recording Press REC (I) T,, _,L,di,, input _ ,_ _l" To S-video on the recording VCR. input CONTINUED --18-- ON NEXT PAGE Various connection foreditingtapes NOTES: The following three methods carl be used for editing tapes. • VHS to S-VHS editing (VIDEO-VIDEO connedion): Although the picture quality is inherently limited by the original VHS quality, the edited tape has better picture quality than those made by VHS-to-VHS editing. • S-VHS to VHS editing (VIDEO-VIDEO connection): Sin_e the original source is re_orded in S-VHS mode, the edited tape has better picture quality than those made by VHS-to-VHS editing. • S-VHS to S-VHS (S-VIDEO connection): • When monitoring tile sound during Audio Dubbing, the normal soundtrack is automatically selected. If you wish to hear the Hi-Fi or mixed sound (Hi-Fi + nomlal soundtra_ ks), press A.MONITOR to select "NORM HI-FI". (t__" p" lights on the display $$ paneh To S-video output [] Startdubbing Engage the Play nrode of the audio component, then press PLAY (1_) on the VCR. Audio Dubbing begins at this point. • Ib pause dubbing, press PAUSE (11). Press PLAY (1_) to resume dubbing. [] Select EndAudioDubbing Press STOP (I) then [] Selectinputmode on the Remote or STOP/EJECT engage the Stop mode of the audio (I/_) on the VCR, component. "F-I " _hen connecting the other component to the audio/video input connectors on the front panel. Select "L-1 " _hen connecting the other component to the audio/video input connectors on the rear panel. Press AUX or CH+/on the Remote. Or push the lOG dial, then turn it to the left or right. CONTINUED --19-- ON NEXTPAGE [] Selectvideoinputconnector Select the appropriate mode depending used (L_ _ pg. 16). When using S-VIDEO input connector "FRONT AUX INPUT" to "S-VIDEO". When using S-VIDEO IN connector AUX iNPUT" to "S-VIDEO". on the front on the rear When using VIDEO input connector "FRONF AUX iNPUT" to "VIDEO'. When using VIDEO IN connector ALJX INPUT" to "VIDEO". on the connector pane[, set GENERAL panel, set "REAR on the front on the rear I Specifications being pane[, Power set pane[, set "REAR _r the VCRs if such a nlode CONTROL" to "EDIT" is (_ pg. 15). Operating 5°C to 40°C Storage -20°C Operating position Dimensions Locateendpoint Horizontal 435 mmx (W x H x D) (41 °F to 104°F) to 60°C (-4°F Weight Format 2.7 kg G.9 S-VHS/VHS Maximum SP Locatestartpoint,andengageInsertEditing mode recording to140°F) only 94 mm x 242 (I 7-3/I 6" x 3-3/4" Load the cassette to be edited into the VCR and press PLAY (1_), then press PAUSE (11) when you find the end of the scene for which you want to edit. Press C.RESET so that the counter reading becomes "0:00:00". [] 1.5 W ]_rnperature equipped. • On this VCR, set "PICTURE [] 60 Hz 16W Power off [] Selecteditmode Set the eclit mode to "ON" AC 120 V_, requirement Power consumption Power on mm x 9-3/4") Ibs) NTSC standard time EP 210 min. with ST-210 vide() cassette 630 rain. with ST-210 vide() cassette Press REW ('_l_l), then press PAUSE (11) when you find file beginning of the s(ene for whi(h you want to edit, then press INSERT. ) " _) . and "L>" • The VCR enters the Insert Editing Pause re(de. Signal system light on the display panel. • If you want to perform AV Dubbing Hi-Fi audio soundtrack and normal anti replace the picture, audio soundtra( k all at the NTSC-type color signal and EIA monochrome signal, 525 lines/ 60 fields Recording/Playback DA-4 press A.DUB system scan Signal-to-noise ratio Horizontal resolution 45 dB same time, after you press INSERT, VIDEO/AUDIO also. [] Startediting I.oad the source cassette and engage the Play mode of the other ( omponent, then press PLAY (1_) on the VCR. insert Editing begins at this point. • Insert Editing stops automatically when the counter reaches "0:00:00", and the VCR enters the Play nlode. To stop editing any time during recording Press STOP (11) on the Remote or STOP/EJECT VCR, then engage the Stop mode of the other S-VHS Frequency range Normal audio on the Azimuth) head helical 230 lines 400 lines VHS Hi-Fi (111._A) (Double system 70 Hz to 10,000 audio Hz 20 Hz to 20,000 Hz RCA connectors Input/Output (onlponent. S-video (IN x 2, OUT (onnectors x I) (IN x 2, OUT x 1) NOTES: TUNER • Be sure to select "AUTO" for "PICTURI_ CONTT_OL" (or "NORM" when "VIDEO CALIBRATION" is set to "OFF'9 after you finish editin_q (_" pg. ! _;. • Fk]iting is not possible with a cassette whose record safety tab has been removed. Tuning • The recording speed (SP/EP; is determinedby tile previous recording to be repMced. If tile recordinff_ speed changes on tile tape to be edited while editing the tape, the inserted picture will be distorted where the recording speed chan_qes. • When you edit a tape, a small portion of tile re(ordin_ preceding to tile editing start point will be erased from edited tape. Frequency-synthesized system Channel coverage VHF Channels 2-13 UHF Channels 14-69 CATV 113 Channels RF output tuner Channel 3 or 4 (switchable; preset to Channel 3 when shipped) 75 ohms, unbalan(ed the TIMER Clock reference Program Quartz capa( ity 1-year progranlmable timer/ 8 programs Memory backup for timer is not supported. ACCESSORIES Provided ac(essories : Infrared "AA" remote battery S-video RF cable cable control (4-pin), (F-type) Specifications shown are for SP mode unless specified E. & O.E. Design and spe( ifi(ations subject to (hange notice. --20-- unit, x 2, otherwise. without I Before requesting service, use this chart and see if you can repair can save you from the trouble of sending your VCR off for repair. the trouble yourself. Small problems are often easily corrected, and this Power [he on. power will not come • The AC power cord is disconnected]. • The Child Lock function is activated. • Connect the AC power cord. • Press an(:] hold POWER {)/I for more than 10 seconds to release the Child Lock function. (_-_" pg. 16) [he clock works, VCR's power will on. but the not come The Remote function. not • The VCR is in the timer recording standby mode with "AUTO TIMER" set to "OFF" (_-_" pg. 15). • The Child Lock function is activated. • Press TIMER to disengage the timer. • Press and] hold POWER {_/I for more than 10 seconds to release the Child Lock function. {_-_ pg. 16) will • The batteries are discharge(:]. • The VCR is in the timer • Remote control Replace recording standby mode. A/B code is wrong. batteries. Press TIMER to disengage Reset A/B code. the timer. (_-_ pg. 17) Playback The tape is running but the picture will not appear, • If the RF connection picture, the channel (_ _" pg. 5) is used to view the on the TV is set incorrectly. • Select channel 3 or 4 on the IV. • If the AV or S-video to view the picture, wrong mode. connection (___" pg. 5) is used the TV receiver is set to the • Select the AV mode on the W. • There is no cassette loaded. • Insert a cassette intact. • The loaded has had its record Recording Recording will not start. cassette safety tab removed. Timer Timer the cassette the record and] cover safety tab is the hole with adhesive tape, or load a cassette record safety tab is intact. on which the Recording recording will not work. • The clock and/or incorrectly. • The timer Timer • Remove on which programing will not the timer program have been set is not engaged. • Set the clock and/or timer program correctly. • Press TIMER to engage the timer an(:] make that (Z) appears on the display panel. sure • The VCR has not been set up properly. • Re-perform the set-up procedures. Make sure you have compensated for guide channel and VCR or cable box channel number mismatches. (_-_ pg. 12) • Timer • Timer programing cannot be performed when timer recording is in progress. Wait until it finishes. recording is in progress. work. Timer recording begins as scheduled, but the channel is always incorrect, • Even though you do not use an external cable box or DBS receiver, "CABLE BOX SET" is set to "ON" or "DBS RECEIVER SET" is set to "ON". • Set "CABI£ BOX SET" to "OFF" or "DBS SET" is set to "OFF". (_-_ pg. 8) RECEIVER You moved, an(] now VCR Plus+ system does not work properly • The receivable stations in the new area are receive(] on different channels than those in the previous area. • Re-perform the procedure in "Changing Plus+ ®Setting" (_-_" pg. 12). VCR • Recording • Press PAUSE (11) to pause the recording, change channels, then press PLAY (1_) to resume recording. Other Problems The channel changed. cannot be Even though Auto or Semiauto (,:lock Set has been performed, the clock is incorrect. is in progress. • The cldx-k setting data channel is incorrect. received from the host -- 21 -- • Select a different host channel during Semiauto (,:lock Set (z_" pg. 6), or perform Manual Clock (_-_ pg. 6). Set FORSERVICING (OnlyinU.S.A.) HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE: 1-800-537-5722 http://www.jvc.com Dear Customer, In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating the unit. In the event that repair is necessary, or for the address nearest your location within the Continental United States, please call 1-800-537-5722 for your nearest authorized servicer or visit our website at www.JVC.com. Remember to retain your Bill of Sale for Warranty Service. -- JVC JVC SERVICE & ENGINEERING COMPANY OF AMERICA DIVISION OF JVC AMERICAS CORP. Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level performance for which JVC is world famous. The JVC service and engineering organization stands behind our products. NATIONAL HEADQUARTERS JVC SERVICE & ENGINEERING COMPANY OF AMERICA DIVISION OF JVC AMERICAS CORR 10 New Maple Avenue Pine Brook, NJ 07058-9641 ACCESSORIES Don't service the product yourself. To purchase accessories for your JVC product, you may contact your local JVC Dealer. From the 48 Continental United States call toll free: 1-800-882-2345 or on the web at www.JVC.com CAUTION To prevent electrical shock, do not open the cabinet. There are no user serviceable parts inside. Please refer to qualified service personnel for repairs. --22 -- WARRANTY(Onlyin U.S.A.) LIMITED WARRANTYcoNSUMER VIDEO 1-90 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below. ('The Warranty Period") PARTS LABOR 1YR 90DAYS THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA COMMONWEALTH OF PUERTO RICO. WHAT WE WILL AND IN DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen size 25 inches and above which are covered on an in-home basis. WHAT YOU MUST DO FOR WARRANTY SERVICE: Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized center, please call toll free: (800) 537-5722. service If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center. the name and location of which will be given to you by the toll-free number. If you have any questions concerning your JVC Product, please contact our Customer Relations Department. WHAT IS NOT COVERED: This limited warranty provided by JVC does not cover: 1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by JVC to render such service, or if affixed to any attachment not provided with the products, or if the model or serial number has been altered, tampered with, defaced or removed; 2. Initial installation and installation and removal for repair; 3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning; 4. Damage that occurs in shipment, due to act of God, and cosmetic damage; 5. Signal reception problems and failures due to line power surge; 6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of purchase; 7. Accessories; 8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase); There are no other express warranties except as listed above. THE DURATION OF ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTY TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. OF MERCHANTABILITY, IS LIMITED JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. JVC COMPANY OF AMERICA DIVISION OF JVC AMERICAS 1700 Valley Road Wayne, New Jersey 07470 CORR REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PACKAGED WITH EACH REFURBISHED PRODUCT. DOES NOT APPLY. FOR DETAILS OF PRODUCT WARRANTY INFORMATION For customer use: Enter below the Model No. and Serial No. which is located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No.: Serial No.: Purchase date: Name of dealer: --23-- JVC VICTOR COPYRIGHT COMPANY © 2003 VICTOR COMPANY OF JAPAN, LTD. OF JAPAN, LIMITED _ _ Printed in China 0103 AH_PJ_BJ