Transcript
contro l l e r k e y p a d The Color Kinetics® Controller Keypad is a wall-mounted keypad that gives you complete control over your Color Kinetics lighting environment at the push of a button. The Controller Keypad features eight buttons for selecting shows, onboard LEDs to indicate the current show, dimmer controls, and a master OFF switch. The Controller Keypad is designed for use with Color Kinetics iPlayer® 2 (ITEM# 103-000007-00). Together, they are the perfect solution for any lighting installation that requires multiple scenes or shows. Just press one of the eight show buttons, and your custom ColorPlay light show (stored on iPlayer 2) is displayed instantly. You can also adjust the brightness, or even turn all the lights off, during show playback. The keypad’s compact design minimizes wall space, while still offering a full set of lighting control features. Installation couldn’t be easier: it mounts in a standard U.S. one-gang wall box, and requires only four wire connections to screw terminals for data and power. FEATURES
• Eight show buttons • Feedback LEDs to indicate show selection and status • Dimmer controls • Master OFF switch • 20-foot serial cable for direct connection to iPlayer 2 PRODUCT SPECIFICATIONS
ITEM# 103-000009-00 This product is protected by one or more of the following patents: U.S. Patent Nos. 6,016,038, 6,150,774 and other patents listed at http://colorkinetics.com/patents/. Other patents pending. ©2001-2005 Color Kinetics Incorporated. All rights reserved. Chromacore, Chromasic, Color Kinetics, the Color Kinetics logo, ColorBlast, ColorBlaze, ColorBurst, ColorCast, ColorPlay, ColorScape, Direct Light, iColor, iColor Cove, iPlayer, Optibin, QuickPlay, Sauce, the Sauce logo, and Smartjuice are registered trademarks and DIMand, IntelliWhite, Powercore, and Video With Light are trademarks of Color Kinetics Incorporated. All other brand or product names are trademarks or registered trademarks of their respective owners.
HOUSING
White matte plastic faceplate and buttons
WEIGHT
3.0 oz (85 g)
DATA CONNECTOR
Screw terminal
POWER CONNECTOR
Screw terminal
ELECTRICAL SPECIFICATIONS POWER REQUIREMENT
50mA @ 5VDC (0.25W)
POWER SUPPLY
None required (powered by iPlayer 2)
INSTALLATION MOUNTING
Fits standard U.S. one-gang wall box
WIRING
Serial cable from iPlayer 2 connects to screw terminals on keypad
BR0081 Rev 10 Specifications subject to change without notice.
U.S. AND FOREIGN PATENTS AND PATENTS PENDING
Philips Solid-State Lighting Solutions • 3 Burlington Woods Drive • Burlington, MA 01803 • USA Tel 888 FULL RGB • Tel 617 423 9999 • Fax 617 423 9998 •
[email protected] • www.colorkinetics.com
controller keypad physical dimensions
FRONT VIEW
SIDE VIEW 1.47 in (3.7 cm)
1
5
2
6
3
7
4
8
4.57 in (11.6 cm)
OFF
1.05 in
2.72 in
(2.7 cm)
(6.9 cm)
BACK VIEW END VIEW 0.51 in (1.3 cm) 0.06 in (0.15 cm)
0.48 in
0.35 in
(1.2 cm)
(0.9 cm)
2.65 in (6.7 cm) 0.30 in 0.78 in
(0.8 cm)
(2.0 cm)
CONTROLLER KEYPAD ITEM# 103-000009-00 1.49 in (3.8 cm)
WEIGHT
3.0 oz (85 g)
DATA CONNECTOR
Screw terminal
POWER CONNECTOR
Screw terminal
POWER REQUIREMENT
50mA @ 5VDC (0.25W)
Philips Solid-State Lighting Solutions • 3 Burlington Woods Drive • Burlington, MA 01803 • USA Tel 888 FULL RGB • Tel 617 423 9999 • Fax 617 423 9998 •
[email protected] • www.colorkinetics.com
controller keypad functional flow diagram
COLOR KINETICS LIGHTS
CAT 5/RJ45 DATA CABLE
COLOR KINETICS POWER/DATA SUPPLY
EXPANSION DMX
iPLAYER 2
POWER
100-240VAC
PS-60 POWER SUPPLY
SERIAL
SERIAL CABLE
1
5
2
6
3
7
4
8
+
USB
-
OFF
CONTROLLER KEYPAD
GND (Black) Tx (White) Rx (Green) +5VDC (Red) CORRECT
WRONG
For complete installation instructions and safety precautions, refer to the Controller Keypad User Guide and wiring diagrams located at www.colorkinetics.com/support.
Philips Solid-State Lighting Solutions • 3 Burlington Woods Drive • Burlington, MA 01803 • USA Tel 888 FULL RGB • Tel 617 423 9999 • Fax 617 423 9998 •
[email protected] • www.colorkinetics.com
