Controls: Application Information

Transcript

™ PORTABLE AUDIO PLAYER INTERFACE APPLICATION INFORMATION UNBALANCED STEREO HEADPHONE-LEVEL SIGNAL SOURCE SUBMIXER MIC INPUT OF MIXING CONSOLE SIGNAL PATH MICROPHONE CABLE (Balanced) SPEAKER CABLE (Unbalanced) PORTABLE MP3 PLAYER 6 POLE BARRIER STRIP (REAR OF PLATE) COMPUTER OUTPUT LEFT S (PIN 1) 3.5mm STEREO MINI OUTPUT LEFT H+ (PIN 2) PORTABLE CASSETTE PLAYER OUTPUT LEFT C- (PIN 3) OUTPUT RIGHT S (PIN 1) 2 RCAs OUTPUT RIGHT H+ (PIN 2) PORTABLE CD/DVD OUTPUT RIGHT C- (PIN 3) CONTROLS: AUDIO INPUT: 3.5 mm stereo mini phone jack accepts signals from unbalanced headphone level sources such as MP3/CD/DVD players and computer audio cards. STEREO/MONO SWITCH: Miniature toggle-type switch provides input summing to combine stereo sources for mono output for applications where stereo operation is not required. Pro Co Sound 225 Parsons Street | Kalamazoo, MI 49007 800-253-7360 L/R: RCA phono-type jackswired in parallel to the STEREO mini input. GROUND LIFT: Miniature toggle-type switch used to reduce hum and buzz by eliminating ground loops and providing proper grounding for various situations. Breaks connection point between input and output electrostatic shields. » www.procosound.com APPLICATION INFORMATION NOTES: 1. inputs of the iPlate Portable Audio Player Interface unit are intended for unbalanced stereo headphone-level sources. It is not intended for line-level sources such as the right and left line-level outputs of a Cassette, CD or CD/DVD player. Pro Co manufactures several TradeTools devices that will correctly interface balanced or unbalanced line-level sources with professional mixing consoles. Please consider a Pro Co DB1, DB2, AV1A or IT1 as a solution for your interface depending upon your specific application. 2. 3. L/R BALANCED OUTPUTS located on the 6 pole barrier strip on the back of the plate are connected to microphone input of house P.A. mixer or recording console. GND/LIFT switch settings assume the mixer is also the central ground reference point for the system. For safety reasons all equipment should be equipped with 3-wire AC power cords and plugged into properly grounded receptacles. Use of the GND/LIFT switch should minimize hum and buzz. If GND/LIFT switch seems non-functional, check wiring of cable plugged into the LO-Z OUTPUT. A cable with a jumper between pin 1 and the connector shell will defeat the GND/LIFT switch. CIRCUIT DIAGRAM: PRO CO MODEL: iPlate DIMENSIONS.................. 4.56” W x 4.56” H x 1.25” D. ..................115.8mm W x 115.8mm H x 31.8mm D WEIGHT..................................................0.45 lb/0.20 kg 6 POLE BARRIER STRIP MBT-1 TRANSFORMER SHIPPING WEIGHT.............................1.00 lb/0.45 kg BLK INPUTS STEREO BRN ORN RED YEL OUTPUT LEFT H+ (PIN 2) T 3.5mm R MONO GRY GND LIFT WHT (CAN) BLK RCA L OUTPUT LEFT S (PIN 1) RED YEL BRN ORN GND LIFT OUTPUT LEFT C- (PIN 3) OUTPUT RIGHT S (PIN 1) OUTPUT RIGHT H+ (PIN 2) RCA R GRY WHT (CAN) SIDE VIEW FRONT VIEW OUTPUT RIGHT C- (PIN 3) MBT-1 TRANSFORMER Other TradeTools™ Products from Pro Co AV1A AVP1 AVP1V DB1 DB2 DB4A DBA1 HJ4P HJ6 iFace iGate iPlate iRack IT1 Audio/Video Interface Unit Wallplate Format Audio/Video Interface Unit Wallplate Format Audio/Video Interface Unit with Input Level Control Professional Direct Box Professional Stereo Direct Box Rackmount Quad Direct Box Professional Active Direct Box Professional Stereo headphone Junction Box Headphone Junction Box Portable Audio Player Interface Universal Audio Gateway Wallplate Format Portable Audio Player Interface Rackmount Portable Audio Player Interface Isolation Transformer Unit IT4A Rackmount Quad Isolation Transformer Unit IT8A Rackmount 8-ch. Isolation Transformer Unit LS82 Rackmount 8-ch. 1:2 Line Level Splitter MC2 Microphone Combiner MS2 1:2 Microphone Splitter MS3 1:3 Microphone Splitter MS42A Rackmount Quad 1:2 Microphone Splitter MS43A Rackmount Quad 1:3 Microphone Splitter MS82 Rackmount 8-ch. 1:2 Microphone Splitter MS82P Rackmount 8-ch. 1:2 Phantom Power Microphone Splitter MS83 Rackmount 8-ch. 1:3 Microphone Splitter MS83P Rackmount 8-ch. 1:3 Phantom Power Microphone Splitter RA1 Reamping Box Switch Witch Powered Monitor Selector . . . plus our full line of audio cabling, snakes! Pro Co Sound 225 Parsons Street | Kalamazoo, MI 49007 800-253-7360 » www.procosound.com iPlate-02 Rev. 06/10