the conversion technology experts ETHERNET STAND-ALONE MEDIA CONVERTERS
STAND-ALONE MEDIA CONVERTERS ETHERNET 10BASE-T TO 10BASE-FL HIGH TEMPERATURE APPLICATIONS TO 70°C Integrate mixed cabling environments using either switched or shared Ethernet. This full-featured media converter makes the migration from copper to fiber easier than ever before. Features High Temperature capable This converter is designed to operate in environments where ambient temperatures can rise to as high as 70°C (158°F).
AutoCross™ AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration. LinkAlert™ Because most Ethernet technologies are unable to recognize downlink faults, a failed link may appear normal to network management; requiring unnecessary troubleshooting. LinkAlert monitors all physical uplink and downlink failures and enables all faults to be detected by network management.
ORDERING INFO
non-climate controlled pedestal enclosure in residential or commercial environments to deliver 10Mbps data access to a given structure.
Product Number
Port One
Port Two
E-TBT-FRL-05(HT)
10BASE-T (RJ-45)
10BASE-FL 850nm MM (ST) 2 KM
E-TBT-FRL-05(SCHT) 10BASE-T (RJ-45)
10BASE-FL 850nm MM (SC) 2 KM
E-TBT-FRL-05(SMHT) 10BASE-T (RJ-45)
10BASE-FL 1300nm SM (ST) 20 KM
E-TBT-FRL-05(XCHT) 10BASE-T (RJ-45)
10BASE-FL 1300nm SM (SC) 20 KM
E-TBT-FRL-05(XLHT) 10BASE-T (RJ-45)
10BASE-FL 1300nm SM (SC) 50 KM
This converter can also be deployed in industrial environments where excessive heat may be a concern. (Note that this device is rated to meet “temperature” requirements of industrial environments only.)
SPS-48V
Optional external 48VDC power supply (sold separately)
WMBS
Optional wall mount brackets (sold separately)
General Applications of an Ethernet 10BASE-T to 10BASE-FL Converter Extend Ethernet Network Distances from 2 km (standard 850nm over multimode fiber) to 5 km (long haul 1300nm over multimode fiber). Over single mode fiber optic cabling you can extend Ethernet network distances from 20 km (standard single mode) up to 50 km (long haul single mode) without a repeater.
Fiber Optic Connector Specs E-TBT-FRL-05(HT) & Min TX PWR: -16.0 dBm E-TBT-FRL-05(SCHT) Max TX PWR: -10.0 dBm RX Sensitivity: -32.5 dBm Max In PWR: -8.0 dBm Link Budget: 16.5 dB
Connect Unlike Devices: Connect your workgroup to a distant server or a central switch, or extend distances between like and unlike devices in either full or half-duplex modes.
SPECIFICATIONS Standards
IEEE 802.3 10BASE-T; 10BASE-FL
Connectors
1 RJ-45 (10BASE-T: 100 meters); 1 duplex fiber optic
E-TBT-FRL-05(SMHT) Min TX PWR: -15.0 dBm & E-TBT-FRL-05(XCHT) Max TX PWR: -8.0 dBm RX Sensitivity: -38.0 dBm Max In PWR: -8.0 dBm Link Budget: 23.0 dB E-TBT-FRL-05(XLHT)
Switches
S1: Switch to perform an internal cross over function on the UTP signals
Unit LED
Power: Lit for normal operation
Port LEDs
Link: Lit LED indicates unit is receiving link pulses from a compliant device; Receive: Flashing or lit LED indicates packets are being received
Dimensions
Width: 1.0" (25 mm) Depth: 3.9" (99 mm) Height: 3.0" (76 mm)
Power
External AC/DC required; 9V DC. 0.5A; unregulated; standard; SPS-48V: optional external 48VDC power supply; Output 12VDC; .8A; 14 watts max.
Environment
-25°C to +70°C; 5% – 95% humidity non-condensing; 0 – 10,000 ft. altitude
HIGH TEMPERATURE APPLICATIONS
High Temperature Applications (to 70°C) This converter can be placed in a non-climate controlled enclosure to facilitate an Ethernet connection to remote devices such as IP based surveillance cameras or signaling equipment. It can also be placed inside a
Min TX PWR: -5.0 dBm Max TX PWR: 0.0 dBm RX Sensitivity: -38.0 dBm Max In PWR: -8.0 dBm Link Budget: 33.0 dB
Shipping Weight
2 lbs. (0.9 kg)
Compliance
UL Listed; C-UL Listed (Canada); CISPR22/EN55022 Class A; FCC Class A; CE Mark
Warranty
Lifetime
10/02 Technical information subject to change without notice.
Transition Networks, Inc. 6475 City West Parkway Minneapolis, MN 55344 USA
tel 952.941.7600 or 800.526.9267 fax 952.941.2322 [email protected] http://www.transition.com