Conversion Experts The Technology

Transcript

the conversion technology experts ETHERNET STAND-ALONE MEDIA CONVERTERS STAND-ALONE MEDIA CONVERTERS  ETHERNET  10BASE-T TO 10BASE-FL Integrate mixed cabling environments using either switched or shared Ethernet. This full-featured media converter makes the migration from copper to fiber easier than ever before. Features „ Select Transition Networks’ products now use LANart’s state of the art ASIC technology. These chips go beyond the functions provided by off-the-shelf-silicon used by our competitors, to incorporate enhancements specific to media conversion technology such as link fault propagation and indicators for power, data and link status. „ AutoCross™ AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration. ORDERING INFO „ LinkAlert™ Because most Ethernet technologies are unable to recognize downlink faults, a failed link may appear normal to network management; requiring unnecessary troubleshooting. LinkAlert monitors all physical uplink and downlink failures and enables all faults to be detected by network management. Applications Extend Network Distance: Two 10BASE-T to 10BASE-FL Media Converters used back-to-back extend the distance between two 10BASE-T devices up to 2 KM using multimode fiber or up to 40 KM using single mode fiber without a repeater. Connect Unlike Devices: Connect your workgroup to a distant server or a central switch, or extend distances between like and unlike devices in either full or half-duplex modes. EXTEND NETWORK DISTANCE 10/02 Technical information subject to change without notice. Transition Networks, Inc. 6475 City West Parkway Minneapolis, MN 55344 USA Product Number E-TBT-FRL-05 Port One 10BASE-T (RJ-45) Port Two 10BASE-FL 850nm MM (ST) 2 KM E-TBT-FRL-05(L) 10BASE-T (RJ-45) 10BASE-FL 1300nm MM (ST) 5 KM E-TBT-FRL-05(LH) 10BASE-T (RJ-45) 10BASE-FL 1300nm SM (ST) 40 KM E-TBT-FRL-05(MT) 10BASE-T (RJ-45) 10BASE-FL 850nm MM (MT-RJ) 2 KM E-TBT-FRL-05(SC) 10BASE-T (RJ-45) 10BASE-FL 850nm MM (SC) 2 KM E-TBT-FRL-05(SM) 10BASE-T (RJ-45) 10BASE-FL 1300nm SM (ST) 20 KM E-TBT-FRL-05(XC) 10BASE-T (RJ-45) 10BASE-FL 1300nm SM (SC) 20 KM SPS-48V Optional external 48VDC power supply (sold separately) WMBS Optional wall mount brackets (sold separately) SPECIFICATIONS Standards IEEE 802.3 10BASE-T; 10BASE-FL Connectors 1 RJ-45 (10BASE-T: 100 meters); 1 duplex fiber optic Fiber Optic Connector Specs E-TBT-FRL-05 & Min TX PWR: -16.0 dBm E-TBT-FRL-05(MT) Max TX PWR: -10.0 dBm & E-TBT-FRL-05 RX Sensitivity: -32.5 dBm (SC) Max In PWR: -8.0 dBm Link Budget: 16.5 dB E-TBT-FRL-05(L) Min TX PWR: -19.0 dBm Max TX PWR: -15.0 dBm RX Sensitivity: -35.0 dBm Max In PWR: -14.0 dBm Link Budget: 15.0 dB E-TBT-FRL-05(LH) Min TX PWR: -17.0 dBm Max TX PWR: -10.0 dBm RX Sensitivity: -35.0 dBm Max In PWR: -14.0 dBm Link Budget: 18.0 dB E-TBT-FRL-05(SM) Min TX PWR: -23.0 dBm & E-TBT-FRL-05(XC) Max TX PWR: -14.0 dBm RX Sensitivity: -35.0 dBm Max In PWR: -14.0 dBm Link Budget: 12.0 dB Switches S1: Switch to perform an internal cross over function on the UTP signals Unit LED Power: Lit for normal operation Port LEDs Link: Lit LED indicates unit is receiving link pulses from a compliant device; Receive: Flashing or lit LED indicates packets are being received Dimensions Width: 1.0" (25 mm) Depth: 3.9" (99 mm) Height: 3.0" (76 mm) Power External AC/DC required; 9V DC. 0.5A; unregulated; standard; SPS-48V: optional external 48VDC power supply; Output 12VDC; .8A; 14 watts max. Environment 0 – 50° C; 5% – 95% humidity non-condensing; 0 – 10,000 ft. altitude Shipping Weight 2 lbs. (0.9 kg) Compliance UL Listed; C-UL Listed (Canada); CISPR/EN55022 Class A; FCC Class A; CE Mark Warranty Lifetime tel 952.941.7600 or 800.526.9267 fax 952.941.2322 [email protected] http://www.transition.com