Conversion Experts The Technology

Transcript

the conversion technology experts ❿ ETHERNET POINT SYSTEM SLIDE-IN-MODULE MEDIA CONVERTERS POINT SYSTEM ❿ SLIDE-IN-MODULE MEDIA CONVERTERS ❿ ETHERNET ❿ 10BASE-T TO 10BASE-FL Integrate mixed cabling environments using either switched or shared Ethernet. This full-featured media converter makes the migration from copper to fiber easier than ever before. Features ■ AutoCross™ Technology AutoCross technology eliminates an entire category of network troubleshooting by automatically matching crossed and uncrossed cables to the appropriate connection. The twisted pair port is instantaneously configured to the correct MDI or MDI-X configuration. ■ SPECIFICATIONS Applications Extend Network Distance: Two 10BASE-T to 10BASE-FL Media Converters used back-to-back extend the distance between two 10BASE-T devices up to 2 KM using multimode fiber or up to 40 KM using single mode fiber without a repeater. Connect Unlike Devices: Connect your workgroup to a distant server or a central switch, or extend distances between like and unlike devices in either full or half-duplex modes. ORDERING INFO: CLASS A ORDERING INFO: CLASS B Product Number Product Number Port Two CLASS A IEEE 802.3 Connectors 1 RJ-45 (100 meters); 1 duplex fiber optic Fiber Optic Connector Specs CETTF1011-xxx Min TX PWR: -16.0 dBm & CETTF1013-xxx Max TX PWR: -10.0 dBm RX Sensitivity: -29.5 dBm Max In PWR: -7.2 dBm Link Budget: 13.5 dB CETTF1012-105 Min TX PWR: -23.0 dBm & CETTF1014-105 Max TX PWR: -14.0 dBm RX Sensitivity: -34.0 dBm Max In PWR: -14.0 dBm Link Budget: 11.0 dB CETTF1022-105 Min TX PWR: -15.0 dBm Max TX PWR: -12.0 dBm RX Sensitivity: -33.0 dBm Max In PWR: -14.0 dBm Link Budget: 18.0 dB CETTF1027-105 Min TX PWR: -19.0 dBm Max TX PWR: -15.0 dBm RX Sensitivity: -34.0 dBm Max In PWR: -14.0 dBm Link Budget: 15.0 dB CETTF1012-200 Min TX PWR: -20.5 dBm & CETTF1014-200 Max TX PWR: -14.0 dBm RX Sensitivity: -34.0 dBm Max In PWR: -14.0 dBm Link Budget: 13.5 dB 3-position Jumper Hardware: Converter mode is determined by 4-position switch settings Software: Converter mode is determined by most recently saved on-board microprocessor settings. 4-position Switch Fiber Port (UP = enabled): Enables/disables network traffic on the fiber port. Copper Port (UP = enabled): Enables/disables network traffic on the copper port. AutoCross (UP = enabled): Enables/disables the AutoCross function LinkAlert (UP = enabled): Enables/disables the LinkAlert function Unit LED Power: On for normal operation Port LEDs LKF (Link Fiber): Steady LED indicates good fiber link and normal operation; RXF (Receive Fiber): Flashing LED indicates data reception on fiber link; LKC (Link Copper): Steady LED indicates good copper link and normal operation; RXC (Receive Copper): Flashing LED indicates data reception on copper link Dimensions Width: 0.85” (22 mm) Depth: 5.0” (127 mm) Height: 3.4" (86 mm) ❿ EXTEND NETWORK DISTANCE LinkAlert™ Because most Ethernet technologies are unable to recognize downlink faults, a failed link may appear normal to network management; requiring unnecessary troubleshooting. LinkAlert monitors all physical uplink and downlink failures and enables all faults to be detected by network management. Port One Standards Port One Port Two Power Consumption 2.3 watts Environment: 0 – 50˚C, 10% to 90% humidity (non-condensing), 0 – 10,000 feet CLASS B CETTF1011-105 10BASE-T (RJ-45) 10BASE-FL 850nm MM (ST) ❿ 2 KM CETTF1011-200 10BASE-T (RJ-45) 10BASE-FL 850nm MM (ST) ❿ 2 KM CETTF1012-105 10BASE-T (RJ-45) 10BASE-FL 1300nm SM (ST) ❿ 20 KM CETTF1012-200 10BASE-T (RJ-45) 10BASE-FL 1300nm SM (ST) ❿ 20 KM CETTF1013-105 10BASE-T (RJ-45) 10BASE-FL 850nm MM (SC) ❿ 2 KM CETTF1013-200 10BASE-T (RJ-45) 10BASE-FL 850nm MM (SC) ❿ 2 KM CETTF1014-105 10BASE-T (RJ-45) 10BASE-FL 1300nm SM (SC) ❿ 20 KM CETTF1014-200 10BASE-T (RJ-45) 10BASE-FL 1300nm SM (SC) ❿ 20 KM CETTF1022-105 10BASE-T (RJ-45) 10BASE-FL 1300nm SM (ST) ❿ 40 KM CETTF1022-200 10BASE-T (RJ-45) 10BASE-FL 1300nm SM (ST) ❿ 40 KM CETTF1027-105 10BASE-T (RJ-45) 10BASE-FL 1300nm MM (ST) ❿ 5 KM CETTF1027-200 10BASE-T (RJ-45) 10BASE-FL 1300nm MM (ST) ❿ 5 KM Shipping Weight 1 lb. (.45 kg) Compliance UL Listed; C-UL Listed (Canada); CE Mark; EN55022; EN55024; EN61000 FCC & CISPR Class A devices comply with radiated emissions standards for commercial applications in the United States (FCC Class A) and Europe (CISPR Class A). FCC & CISPR Class B devices comply with radiated emissions standards for residential applications in the United States (FCC Class B) and Europe (CISPR Class B) Warranty Lifetime 11/01 Technical information subject to change without notice. Transition Networks, Inc. 6475 City West Parkway Minneapolis, MN 55344 USA tel 952.941.7600 or 800.526.9267 fax 952.941.2322 [email protected] http://www.transition.com