Transcript
Convertamatic™ BA 625, 725, 825
Parts List
Advance Models: 56315000(24D-C), 56315001(26D), 56315002(28D), 56315003(24C-C), 56315004(28D-C), 56315005(28C-C), 56315006(X24D-C), 56315007(X24C-C), 56315008(26D-C), 56315009(X26D-C), 56315010(26C-C), 56315011(X26C-C), 56315012(X28D-C), 56315013(X28C-C), 56315804(32D-C) 56315805(X32D-C) Nilfisk Models: 56315800(625), 56315801(725), 56315802(725C), 56315803(825)
11/04 revised 4/08 FORM NO. 56042451
04-11
TABLE OF CONTENTS Convertamatic™ / BA 625, 725, 825
08-4
DESCRIPTION
1
PAGE
Chassis System ................................................................................................. 2-3 Chassis System (squeegee linkage assy before SN1915725) ......................... 4-5 Chassis System (squeegee linkage assy after SN1915724) ............................ 6-7 Decal System..................................................................................................... 8-9 Recovery System........................................................................................... 10-11 Scrub System-Disk (24” / BA 625, 26”, 28” / BA 725) .................................... 12-13 Scrub System-Disk (32” / BA 825) ................................................................. 14-15 Scrub System-Cylindrical............................................................................... 16-17 Solution System / Electrical-1 ........................................................................ 18-19 Solution System / Electrical-2 ........................................................................ 20-21 Chemical Assembly (AXP Models Only) ........................................................ 22-23 Paddle Assembly ........................................................................................... 24-25 Squeegee Assembly ...................................................................................... 26-27 Wiring Diagram .............................................................................................. 28-29 Optional Kits & Accessories ................................................................................ 30 Brush Selector Guide-Disk ................................................................................. 31 Brush Selector Guide-Cylindrical ........................................................................ 32
WHEN ORDERING PARTS *
Use the 8 digit numbers from the “Ref. No.” columns in this parts list.
*
Specify the model and serial number of the machine.
*
Use the space below to record the model and serial number for future reference.
Model
Serial No.
FORM NO. 56042451
2
FORM NO. 56042451
CHASSIS SYSTEM Convertamatic™ / BA 625, 725, 825
04-11 05-12
04-11 08-4
CHASSIS SYSTEM Convertamatic™ / BA 625, 725, 825
Item
Ref. No. Qty
Description
1 2 3 4 5 6 7 8 9 10 11# 12 13 14 15 16 17 18 19 20 21 22 * * * 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41# 42 43# 44
56003312 56003389 56370878 56001879 56001939 56001954 56002022 56002708 56002768 56002832 56003012 56003179 56003405 56003435 56003637 56009241 56900033 56219932 56244991 56262180 56315115 56315062 56315377 56315378 56315379 56315076 56315080 56315108 56315111 56315154 56315165 56315179 56315234 56315239 56315258 56315260 56315296 56365555 56391802 56409152 56756364 56315607 56412182 56009030 56467544 56002220 56900756
Nut, Hex Nyl Loc M12-1.75 Nut, Hex Nyl Loc M8-1.25 Bearing, Sleeve Wsh, Flt SAE 1/2 Wsh, Flt SAE 5/16 Wsh, Flt SAE #10 Wsh, Flt SAE 5/8 Nut, Hex Nyl Loc 1/4-20 Nut, Hex Nyl Loc 10-24 Nut, Hex Nyl Loc-Thin 10-24 Scr, Hex Hd SS 5/16-18x.75 Scr, Hex Thd To Hd M8-1.25x20mm Nut, Hex Nyl Loc SS M8x1.25 Scr, Hex Hd SS 8-1.25x20mm Scr, Hex M12-1.75x40mm Scr, Hex Hd 3/8-16x4.25 Barb, 90 Elbow 3/8 X 1/2 Npt Clamp, Hose SAE #6 Hose, PVC .375 Hose, Spiral .500 Wheel, Drive TSBUS2006-941 Transaxle, 24V (M1) Motor Carbon Brush Neoprene Mounting Sleeve Weldment, Chassis TSBUS2005-895 Bushing Pump, 24VDC (M7) Cylindrical Mount Bushing, Spacer Assembly, Squeegee Linkage Linkage Arm Plate Linkage Arm only used before TSBUS2007-957 Shim Bracket, Filter Mount Solution Filter Caster Swivel 4.0x2.0 Hose, Spiral .375 Barb, 90 Elbow 1/2 X 1/2npt Clamp, Hose SAE #4 Ball Valve Nipple, Hex 3/4-14 Scr, Pan Phil Thd Form 10-24 x .38 Chain Wsh, Flt STD 5/16 (Advance only) Clip, Conduit
2 4 2 2 4 2 4 10 2 1 3 4 4 4 2 1 1 2 1 1 2 1 1 4 2 1 2 1 2 1 1 2 2 1 2 1 1 1 1 1 4 1 1 1 1 2 1
3
* = Not Shown # = Revised or new since last update
FORM NO. 56042451
4
FORM NO. 56042451
CHASSIS SYSTEM (squeegee linkage assy before SN1915725) Convertamatic™ / BA 625, 725, 825
04-11 06-4
04-11 08-4 Item # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
CHASSIS SYSTEM (squeegee linkage assy before SN1915725) Convertamatic™ / BA 625, 725, 825
Ref. No. Qty
Description
56315165 56185264 56250414 56324350 56331076 56471220 56475480 56001833 56001836 56002098 56002840 56002850 56002852 56002901 56003123 56003682 56003692 56009084 56315082 56315151 56315153 56315180 56315196 56315240 56315245 56315295 56315338
Squeegee Linkage Assembly NOTE 1 Bearing, Flange Bearing, Flange Wheel Collar Bushing Knob Scr, Hex Hd 1/4-20x1.50 Scr, Hex Hd 1/4-20x.62 Wsh, Flt SAE 1/4 Nut, Hex Nyl Loc-Thin 1/4-20 Nut, Hex Nyl Loc-Thin SS 1/4-20 Nut, Hex Nyl Loc-Thin SS 3/8-16 Scr, Hex Hd SS 1/4-20x1.50 Scr, Soc Set 10-24x.38 Scr, Soc Shd .50 X .50 X 3/8-16 Scr, Soc Shd .50 X .75 X 3/8-16 Scr, Soc Set Loc 10-24x.19 Pin Bracket, Squeegee Mount Bracket, Wheel Bracket, Squeegee Level Weldment, Squeegee Rod, Adjustment Bushing, Squeegee Cable Spring, Extension Linkage Arm
1 8 2 1 2 1 1 1 2 1 3 1 8 1 1 6 2 2 1 1 1 1 1 1 1 2 4
5
NOTE 1: This version of the Squeegee Linkage Assembly was only used on Advance branded models.
FORM NO. 56042451
6
FORM NO. 56042451
CHASSIS SYSTEM (squeegee linkage assy after SN1915724 / ALL Nilfisk) Convertamatic™ / BA 625, 725, 825
04-11 08-4
04-11 08-4
CHASSIS SYSTEM (squeegee linkage assy after SN1915724 / ALL Nilfisk) Convertamatic™ / BA 625, 725, 825
Item
Ref. No. Qty
Description
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17# 18 19 20 21 22 23 24 25 26 27 28
56315165 56324350 56331076 56315580 56475480 56001833 56001836 56002063 56002091 56002098 56002840 56002850 56002852 56002901 56003123 56009084 56250414 56315941 56315067 56315068 56315082 56315151 56315153 56315196 56315240 56315245 56315295 56315713 56002940
Squeegee Linkage Assembly Wheel Collar Bushing Knob Scr, Hex 1/4-20 X 1.50 Scr, Hex 1/4-20 X .62 Wsh, Flt SAE 3/8 Scr, Hex 3/8-16 X 2.00 Wsh, Flt SAE 1/4 Nut, Hex Nyl Loc-Thin 1/4-20 Nut, Hex Nyl Loc-Thin Ss 1/4-20 Nut, Hex Nyl Loc-Thin Ss 3/8-16 Scr, Hex SS 1/4-20 X 1.50 Scr, Soc Set 10-2 4x .38 Scr, Soc Set Loc 10-24 X .19 Bearing, Flange Linkage Arm, Molded Spacer, Phenolic Spacer, Phenolic Pin Bracket, Squeegee Mount Bracket, Wheel Weldment, Squeegee Rod, Adjustment Bushing, Squeegee Cable Spring, Extension Bracket, Squeegee Level Wsh, Flt SAE SS 5/8
1 1 2 1 1 1 2 14 8 1 3 1 8 1 1 2 2 4 6 2 1 1 1 1 1 1 2 1 2
7
# = Revised or new since last update
FORM NO. 56042451
8
FORM NO. 56042451
DECAL SYSTEM Convertamatic™ / BA 625, 725, 825
04-11
08-4
04-11
08-4 Item 1 2 3
4 5 6 7 8#
DECAL SYSTEM Convertamatic™ / BA 625, 725, 825
Ref. No. Qty
Description
56014601 56016688 56016689 56315706 56315830 56315831 56315832 56016690 56016691 56054192 56016349 56317130 56014450
Decal, Caution Decal, Battery Wiring Decal, Convertamatic (Advance only) Decal, Convertamatic AXP (Advance only) Decal, BA625 (Nilfisk only) Decal, BA725 (Nilfisk only) Decal, BA825 (Nilfisk only) Decal, Circuit Breaker Decal, Ladder Diagram Decal, Charger Decal, Advance (Advance only) Decal, Nilfisk (Nilfisk only) Decal, Patent Number
1 1 2 2 2 2 2 1 1 1 1 1 1
9
# = Revised or new since last update
FORM NO. 56042451
10
FORM NO. 56042451
RECOVERY SYSTEM Convertamatic™ / BA 625, 725, 825
04-11
08-4
04-11
08-4 Item 1 2 3 * 4 5 6 7# 8 9 10 11 12 13 14 15 16# 17# *# *# 18# 19# 20 21 22 23 24 25 26 27 28 29 30 31 32
RECOVERY SYSTEM Convertamatic™ / BA 625, 725, 825
Ref. No. Qty
Description
56315375 56315847 56412154 56412218 56412300 56397098 56001906 56001993 56002053 56477613 56002098 56002145 56002849 56002896 56002919 56003003 56009005 56315346 56305464 56601400 56601411 56601412 56315779 56315176 56315096 56315098 56315099 56315102 56315141 56315220 56315257 56315268 56315272 56315293 56315303 56440213 56315840
Foam, Acoustical (Advance only) Foam Tube Assembly (Nilfisk only) Gasket, Vacuum Duct Motor, Vac 24vdc (M4) (Advance only) Motor, Vac 24vdc W/Filter (M4) (Nilfisk only) Carbon Brush set of 2 (for 56412218 & 56412300) Wsh, Flt STD 1/4 Scr, Pan Phil 10-24x.50 Wsh, Flt STD #10 Tie, Cable Wsh, Flt SAE 1/4 Scr, Pan Phil 1/4-20x.50 Nut, Hex Nyl Loc-Thin SS 10-24 Scr, Pan Phil SS 10-24x.62 Wsh, Flt STD SS #10 Scr, Pan Phil 5/16-18x.62 Scr, Pan Phil SS Type B 10-16 x .75 Plate Plug,3/4 Hex Pipe NOTE 1 Drain Hose NOTE 2 Drain Hose Cap Kit Drain Hose Kit NOTE 2 Tank, Recovery Cover, Recovery Tank Switch, Electromagnetic (S4) Gasket Screen, Fan Inlet Shroud, Vac Motor Mount, Vibration Gasket, Recovery Lid Clamp, P Vac Hose Assy. Cable Assy Hinge Retaining, Strap Clamp, Hose SAE #32 Duct, Vac Inlet (Nilfisk only)
1 1 1 1 1 1 1 5 4 3 3 3 2 2 4 1 2 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 2 2 1
11
* = Not Shown # = Revised or new since last update NOTE 1: Not used after March 2008. NOTE 2: Drain Hose 56397142 has been replaced by Drain Hose 56601400 in production. When replacing 56397142 you need to order Drain Hose Kit 56601412.
FORM NO. 56042451
12
FORM NO. 56042451
SCRUB SYSTEM - DISK (24”/BA 625, 26”, 28”/BA 725) Convertamatic™ / BA 625, 725, 825
04-11 08-4
04-11 08-4 Item 1 2 3 4 5 6 7 8 9 10 11 12# 13 14 15 17 18# 19
SCRUB SYSTEM - DISK (24”/BA 625, 26”, 28”/BA 725) Convertamatic™ / BA 625, 725, 825
Ref. No. Qty
Description
56002959 56324350 56001879 56002910 56002938 56003120 56003335 56003438 56003472 56003477 56003533 56003674 56003679 56003693 56009107 56257534 56314108 56315588 56315587
3 1 2 8 7 2 2 4 1 6 4 8 2 3 2 1 2 1 1
Pin, Cotter Hair NOTE 3 / TSBUS2007-957 Wheel Wsh, Flt SAE 1/2 NOTE 3 / TSBUS2007-957 Wsh, Flt SAE SS 3/8 Wsh, Flt SAE SS 5/16 Pin, Cotter Hair .0915 X .375 Scr Hex Loc SS 5/16-18 X .88 Nut, Hex Nyl Loc SS M10x1.5 Scr, Soc Shd .38 X 1.00 X 5/16-18 Scr, Hex Loc SS M8-1x25mm Scr, Hex Hd SS M10-1.5x20mm Scr Hex Loc SS 3/8-24 X .62 (Advance only) Pin, Ring .50 X 1.63 Rivet, Nylon Tree Push-In (.218) Wsh, Flt SS .378 X 1.000 X .120 Hose, Pvc .375 Hub, Drive Scrub Deck, Disc, Cast, 28/BA 725 NOTE 2 Scrub Deck, Disc, Cast, 26 (Advance only)
56315586 56315056 56315376 56397138 56315060 56315161
1 2 4 4 1 1
Scrub Deck, Disc, Cast, 24/BA 625 NOTE 2 Asm, Motor And Gear Unit, .42hp (M2 / M3) Carbon Brush Brush Spring Hose, Pvc .375 Pin
NOTE 2 20 * * 21 22
Item 23
24 25 26 27 28 29 30 31 32 33 34 35 36 37 38# 39# 40# * *
13
Ref. No. Qty
Description
56315718
1
56315719
1
56315275 56315274 56315754 56315753 56315752 56315339 56396080 56396081 56397300 56002938 56003405 56003436 56009030 56009096 56407053 56314030 56397081 56315373 56002769 56315759 56315742
1 1 1 1 1 1 1 1 1 3 3 3 1 1 2 1 1 2 4 1 1
Weld’t, Deck Actuator (24”/BA 625 / 26”) NOTE 2 NOTE 3 / TSBUS2007-957 Weld’t, Deck Actuator (28”/BA 725) NOTE 2 NOTE 3 / TSBUS2007-957 Skirt, Rubber (26”) Skirt, Rubber (24”/BA 625 & 28”/BA 725) Bumper, Extruded (28”/BA 725) NOTE 4 Bumper, Extruded (26”) NOTE 4 Bumper, Extruded (24”/BA 625) NOTE 4 Bracket Lug, Counterclockwise (30-37) Lug, Clockwise (30-37) Tee, Barb NOTE 1 Wsh, Flt SAE SS 5/16 Nut, Hex Nyl Loc SS M8-1.25 Scr, Hex Hd SS M8-1.25 x 25mm Scr, Pan Phil Thd Form 10-24 x .38 Wsh, Flt .193 x .875 x .060 Thermoid Disk Brush Holder Spring Retainer Weld’t, Deck Mount Brkt NOTE 2 Nut, Hex Nyl Loc 3/8-16 NOTE 2 Band Clamp (28”/BA 725) Band Clamp (24”/BA 625 & 26”)
56315838 56413883
2 2
Harness, Filter (Nilfisk only) Ferrite Bead (Nilfisk only)
* = Not Shown # = Revised or new since last update
NOTE 1: The previous solution hose design which consisted of a Reducer (56418669), Hose Clamps (56219932) and a smaller 3/8” diameter Hose (56456830) to the scrub deck has been replaced in production with a single 1/2” diameter hose (56264318). If ordering Tee 56397300 for a machine with this previous design solution hose you will also need to order Solution Hose 56264318. See NOTE 1 on SOLUTION SYSTEM / ELECTRICAL-1. NOTE 2: The Deck Casting (item #19) has been redesigned. The old style castings (56315053 - 28”, 56315054 - 26” & 56315055 – 24”) are no longer available. If you have a machine built prior to this change (old style deck assembly DOES NOT include item 38) and need to replace one of these deck castings you need to order one of the kits listed below. These kits include items (8, 11, 14, 19, 23, 38, 39). Old Deck 56315053 (28”) 56315054 (26”) 56315055 (24”)
Order Kit 56315727 56315726 56315725
NOTE 3: Actuator Weldment Item #23 has been redesigned to accommodate a new upper deck linkage arm (see Solution System / Electrical-1 / TSBUS2007-957). The redesigned weldment is backwards compatible to the previous design. The new design does not use item #3 and the quantity of item #1 is reduced to 2. NOTE 4: Extruded Bumpers PNs 56315318, 56315277 & 56315276 are obsolete. If you need to replace one of these bumpers please order one of the kits listed below. Old Bumper 56315318 (28”) 56315277 (26”) 56315276 (24”)
Order Kit 56315764 56315763 56315762
FORM NO. 56042451
14
FORM NO. 56042451
SCRUB SYSTEM - DISK (32”/BA 825) Convertamatic™ / BA 625, 725, 825
04-11 07-4
04-11 08-4
SCRUB SYSTEM - DISK (32”/BA 825) Convertamatic™ / BA 625, 725, 825
Item
Ref. No. Qty
Description
1 2 3 4 5 6 7# 8 9 10 11 12 13 14 15 16 17 18 20# 21 * * 22 23 24 25 26 27 28 29 30 31 32 33 34 35
56002769 56002850 56002859 56002910 56002938 56002959 56002880 56003120 56003335 56003338 56003438 56003477 56003533 56003679 56003693 56009022 56009107 56049261 56314108 56315056 56315376 56397138 56315161 56315339 56315859 56315626 56315755 56315761 56315821 56315823 56315826 56396080 56396081 56396195 56397300 56397301
4 1 2 8 6 2 1 2 2 8 4 6 4 2 3 1 2 1 2 2 4 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Nut, Hex Nyl Loc 3/8-16 Nut, Hex Nyl Loc-Thin Ss 1/4-20 Wsh, Flt Sae Ss 1/4 Wsh, Flt Sae Ss 3/8 Wsh, Flt Sae Ss 5/16 Pin, Cotter Hair Scr, Hex Loc Ss 1/4-20 X 1.75 Pin, Cotter Hair .0915 X .375 Scr, Hex Loc Ss 5/16-18 X .88 Scr, Hex Loc Ss 3/8-16 X .75 Nut, Hex Nyl Loc Ss M10-1.5 Scr, Hex Loc Ss M8-1 X 25mm Scr, Hex Ss M10-1.5 X 20mm Pin, Ring .50 X 1.63 Rivet, Nylon Tree Push-In (.218) Wsh, Flt .754 X 1.250 X .120 Wsh, Flt Ss .378 X 1.000 X .120 Wheel Hub, Drive Asm, Motor And Gear Unit, .42hp (M2 / M3) Carbon Brush Brush Spring Pin Bracket Scrub Deck , Disc, Cast, 32”/BA 825 Skirt, Rubber 32”/BA 825 Extruded Bumper, 32”/BA 825 Deck Band Clamp, Adjustable Deck Mount Brkt Weldt, Lhs Deck Mount Brkt Weldt, Rhs Bracket Weld’t Lug, Counterclockwise (36-43) Lug, Clockwise (36-43) Hose, Pve .38id X 6.00 Tee,Barb Hose, Pvc .375
36 37 38 39 40 41 42 43
56002938 56003405 56003436 56009030 56009096 56407053 56314030 56397081
3 3 3 1 1 2 1 1
Wsh, Flt SAE SS 5/16 Nut, Hex Nyl Loc SS M8-1.25 Scr, Hex Hd SS M8-1.25 x 25mm Scr, Pan Phil Thd Form 10-24 x .38 Wsh, Flt .193 x .875 x .060 Thermoid Disk Brush Holder Spring Retainer
44
56315580
1
Bushing, Stainless
* *
56315838 56413883
2 2
Harness, Filter (Nilfisk only) Ferrite Bead (Nilfisk only)
15
* = Not Shown # = Revised or new since last update
FORM NO. 56042451
16
FORM NO. 56042451
SCRUB SYSTEM - CYLINDRICAL Convertamatic™ / BA 625, 725, 825
04-11 07-2
04-11 07-4 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 * 18 19 20 21 22 23 24 25 26
SCRUB SYSTEM - CYLINDRICAL Convertamatic™ / BA 625, 725, 825
Ref. No. Qty
Description
56002959 56003403 56407391 56407433 56412176 56001879 56002086 56002948 56003120 56003426 56003431 56003492 56003603 56003679 56315355 56315354 56315353 56112771 56315061 56412287 56315161 56315320 56315321 56262549 56315408 56315445 56315448 56315459 56315453 56315403 56315470 56315469 56315468
Pin, Cotter Hair NOTE 2 / TSBUS2007-957 Nut, Hex Nyl Loc M6-1.00 Blade Sheave, Poly-V Bushing Wsh, Flt SAE 1/2 NOTE 2 / TSBUS2007-957 Scr, Soc Set Loc 5/16-18x.25 Scr, Hex Hd Loc 1/4-20x.75 Pin, Cotter Hair .0915 X .375 Nut, Hex Nyl Loc SS M6x1.0 Scr, Hex Hd SS M6-1.0x16mm Scr, Hex M6-1.0x95mm Scr, Pan Phil Thd Form 1/4-20x.38 Pin, Ring .50 X 1.63 Manifold, PVC (28”/BA 725) Manifold, PVC (26”) Manifold, PVC (24”) Clamp, Hose SAE #10 Motor, 24 Vdc, .5 Hp, 1800 RPM (M2 / M3) Brush / Spring Kit Pin Harness, Brush Belt, Auto Tension Tee, Barb NOTE 1 Drive End Assy (#36-43) Cover, Belt Idler End Assy (#44-48) Hopper Assembly (28”/BA 725 / #29-35)) Hopper Assembly (26” / #29-35) Hopper Assembly (24” / #29-35) Housing, Weld’t (28”/BA 725) Housing, Weld’t (26”) Housing, Weld’t (24”)
3 2 2 2 2 6 4 6 2 8 2 2 2 2 2 2 2 2 2 1 1 2 2 1 2 2 2 1 1 1 1 1 1
17
Item
Ref. No. Qty
Description
36 37 38 39 40 41 42 43 44 45 46 47 48
56410214 56412459 56003426 56002896 56003431 56009060 56315460 56315454 56315401 56315464 56315462 56315319 56315467 56315466 56315465 56106070 56407389 56407442 56002119 56003237 56315405 56407557 56407558 56106070 56407558 56315447 56396254 56407551
2 2 4 2 4 2 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 1 1 1 1 1 1 1
Strap Wheel Nut, Hex Nyl Loc SS M6-1.00 Scr, Pan Phil SS 10-24 x .62 Scr, Hex Hd SS M6-1.00 x 16mm Wsh, Flt SS .260 x 1.00 x .074 Hopper (28”/BA 725) Hopper (26”) Hopper (24”) Hopper Screen (28”/BA 725) Hopper Screen (26”) Hopper Screen (24”) Hopper Bracket (28”/BA 725) Hopper Bracket (26”) Hopper Bracket (24”) Bearing, Ball Spacer Sheave, Poly-V Scr, Soc Set Loc 1/4-20 x .50 Key, Sq. .19 x .62 Bearing Plate Spindle Washer, Bearing Bearing, Ball Washer, Bearing Idler Bearing Plate Knob Hub
*
56315838
2
Harness, Filter (Nilfisk only)
27 28 29 30 31 32 33 34 35
* = Not Shown
NOTE 1: The previous solution hose design which consisted of a Reducer (56418669), Hose Clamps (56219932) and a smaller 3/8” diameter Hose (56456830) to the scrub deck has been replaced in production with a single 1/2” diameter hose (56264318). If ordering Tee 56262549 for a machine with this previous design solution hose you will also need to order Solution Hose 56264318. See NOTE 1 on SOLUTION SYSTEM / ELECTRICAL-1. NOTE 2: Housing Weldment Item #26 has been redesigned to accommodate a new upper deck linkage arm (see Solution System / Electrical-1 / TSBUS2007-957). The redesigned weldment is backwards compatible to the previous design. On machines with the new design the quantity of item #1 is reduced to 2 and the quantity of item #6 is reduced to 4.
FORM NO. 56042451
18
FORM NO. 56042451
SOLUTION SYSTEM / ELECTRICAL-1 Convertamatic™ / BA 625, 725, 825
04-11 08-4
04-11 08-4 Item 1 2 4 6 7 8# 9 10 11 12 13 16 21 25 26# 27# 29 32 33# 34 36 38# 42 43 46 48# 49 61 63# 64 65 67 68 71 74 76 77 78 79 80 81 82 83 84 100 101 102 103 107 108 109 110 111
SOLUTION SYSTEM / ELECTRICAL-1 Convertamatic™ / BA 625, 725, 825
Ref. No. Qty
Description
56315285 56002959 56370878 56003312 56003403
1 1 1 1 2
56365777 56418669 56001832 56001879 56001939 56002667 56002684 56002841
4 1 4 2 4 6 1 1
56003174 56003637
2 1
56003679 56009139
1 4
56315089 56315104 56315130 56315186 56315191 56315284 56109519 56387302 56396049 56315380 56397203 56264318 56469380 56009019 56009062 56393303 56412071 56412262 56420018 56420019 56420020 56396268 56002786 56397188 56397187 56219932 56009122 56315839 56315836 56002063 56003120
1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 1 1 1 1 1 1 1 2 1 1 3 2 1 1 3 2
Hinge Pin, Cotter Hair Bearing, Sleeve only used before TSBUS2007-957 Nut, Hex Nyl Loc M12-1.75 only used before TSBUS2007-957 Nut, Hex Nyl Loc M6-1.00 Deleted Intentionally Lug, Brush Driver Reducer, Barb Scr, Flt Phil 1/4-20x1.00 Wsh, Flt SAE 1/2 Wsh, Flt SAE 5/16 QTY of 5 after TSBUS2007-957 Scr, Hex Hd 5/16-18x.75 QTY of 7 after TSBUS2007-957 Scr, Hex Hd 3/8-16x1.75 Nut, Hex Nyl Loc-Thin 3/8-16 Deleted Intentionally Deleted Intentionally Scr Hex Thd To Hd M6-1.0x16mm Scr, Hex M12-1.75x40mm only used before TSBUS2007-957 Deleted Intentionally Pin, Ring .50 X 1.63 Scr, Pan Phil Loc 10-24x.38 Deleted Intentionally Tank, Solution Nose Cone, 24-26 Commercial Weldment, Actuator Mount Bracket, Linkage Pivot (Advance only) only used before TSBUS2007-957 Yoke, Actuator Cover, Chemical Bottle Cap, Raw W/Tether NOTE 2 Spiral, Hose X .500 Lift Actuator Assembly (76-84) Bushing only used before TSBUS2007-957 Solenoid Valve Assy. (L1) Hose, Spiral .500 NOTE 1 Clamp, P Scr, Hex Thd Form 1/4-20 X .38 Scr, Pan Phil Thd Form 1/4-20 X .50 Actuator, Motor (M5) Compression Spring Housing, Spring Compression Spring Nut Retainer Nut Retainer Spring Housing Guide Scr, Pan Phil 1/4-20 x 1.50 (onboard charger only) Connector Assy (connected to batteries / onboard charger only) Connector Assy (connected to machine / onboard charger only) Clamp, Hose SAE #6 Wsh, Flt .344 x .938 x .125 Bracket Weld’t only used after TSBUS2007-957 Turnbuckle Assy only used after TSBUS2007-957 Wsh, Flt SAE 3/8 only used after TSBUS2007-957 Pin, Cotter Hair .0915 x .375 only used after TSBUS2007-957
19
# = Revised or new since last update NOTE 1: The previous solution hose design which consisted of a Reducer (56418669), Hose Clamps (56219932) and a smaller 3/8” diameter Hose (56456830) to the scrub deck has been replaced in production with a single 1/2” diameter hose (56264318). If ordering this new hose (56264318) for a machine with the previous design you will also need to order a new Tee (56397300 for disc / 56262549 for cylindrical) for the scrub deck. See NOTE 1 on SCRUB SYSTEM – DISK (24”/BA 625, 26”, 28”/BA 725) and SCRUB SYSTEM – CYLINDRICAL. NOTE 2: The previous Solution Tank Cap 56315517 is obsolete. The new Cap 56109519 can be used in place of the original.
FORM NO. 56042451
20
FORM NO. 56042451
SOLUTION SYSTEM / ELECTRICAL-2 Convertamatic™ / BA 625, 725, 825
04-11 08-4
04-11 08-4 Item
SOLUTION SYSTEM / ELECTRICAL-2 Convertamatic™ / BA 625, 725, 825
21
Ref. No. Qty
Description
Item
Ref. No. Qty
Description
3 5# 14 15 17
56364527 56407361 56001954 56001993 56002066
1 1 8 4 7
18 19 20 22
56002098 56002124 56002145 56002708
4 12 5 4
23 24 28 30 31 35
56002832 56002840 56002962 56003266 56002094 56009030
2 1 1 1 4 3
37 39 40 41 * 44 45
56009206 4 56244969 1 56264442 1 56303553 1 56303526 A/R 56315121 1 56315124 1
55 56 57 58 59 60 62# # 66 69 70 72 75 85 86 87 88 89 90 91 92 93 94 95 96 97
56315245 56315255 56315256 56315259 56315266 56315270 56315297 56315777 56396143 56409152 56410166 56412285 56486112 56009203 56412089 56412179 56469858 56002462 56002561 56003698 56315182 56315294 56397088 56009030 56409538 56315345
1 1 1 1 1 1 1 1 1 1 2 1 2 3 1 1 3 7 4 2 1 1 1 1 4 1
* 47
56315747 56315162
1 1
98
56397187
1
50 51 52 53 54
56315193 56315206 56315222 56315236 56315243
2 1 1 1 1
Knob Clamp, Plastic Wsh, Flt SAE #10 Scr, Pan Phil 10-24x.50 Scr, Pan Phil 1/4-20x.62 (Onboard Charger Only) Wsh, Flt SAE 1/4 Scr, Pan Phil 10-24x.62 Scr, Pan Phil 1/4-20x.50 Nut, Hex Nyl Loc 1/4-20 (Onboard Charger Only) Nut, Hex Nyl Loc-Thin 10-24 Nut, Hex Nyl Loc-Thin 1/4-20 Scr, Soc Shd .38 X .62 X 5/16-18 Ring, Ret Ext Type E 0.75 Dia Scr, Hex Hd 5/16-18x1.50 Scr, Pan Phil Thd Form 10-24x.38 (Qty of 1 on Non-Onboard Charger models) Scr, Truss Phil-Blk 10-24x.50 Clamp, Hose SAE #12 Barb, 90 Ebow 3/4 X 3/8npt Key Switch Assembly Set of 2 Replacement Keys Guide, Cable Charger, On-Board 24V NOTE 3 TSBUS2006-931 Thermistor Repair Kit for 56315124 Assy, Electrical Box (85-96) TSBUS2005-897 TSBUS2006-926 Bushing, Flange Bracket, Charger (Onboard Charger Only) Panel, Electrical Weldment, Squeegee Lift Cable Assy
99
56002825
2
104 105 106 107#
56315382 56315532 56001993 56212236
1 1 2 1
Bushing, Squeegee Cable Circuit Breaker, 5 Amp Circuit Breaker, 30 Amp Plate, Circuit Breaker Assembly, Paddle TSBUS2005-898 Charger Cord, Us (Onboard Charger Only) Control Panel Assy (A1) NOTE 1 (Advance only) Control Panel Assy (A1) NOTE 2 Hose, Pvc Barb, 90 Elbow 1/2 X 1/2npt Clamp, P Gasket, Elect. Cover Clamp, P (Onboard Charger Only) Stud, 1/4-20 Fuse, 150 Amp (F1) Contactor, 24 Vdc (K2 / Vac Motor) Standoff, Insulated Scr, Pan Phil 1/4-20x.38 Nut, Hex W/ Shprf 1/4-20 Scr, Pan Phil Thd Form 8-32 x .75 Panel, Electrical Speed Control (A2) Contactor, 24v Spdt (K1 / Brush Motor) Scr, Pan Phil Thd Form 10-24x.38 Insulator, Terminal Connector Assy (connected to batteries) (non onboard charger only) Connector Assy (connected to machine) (non onboard charger only) Scr, Pan Phil 1/4-20 x 1.25 (non onboard charger only) Clip, Conduit Gasket Scr, Pan Phil 10-24 x .50 Clamp, Plastic
* = Not Shown # = Revised or new since last update
NOTE 1: Order this control panel assy if you have the “Old Pump” voltage reading across the solution pump (M7) leads. NOTE 2: Order this control panel assy if you have the “New Pump” voltage reading across the solution pump (M7) leads. Voltage Regular Scrub Old Pump New Pump
7 9.56
Heavy Scrub Old Pump New Pump
11.3 13.7
Extreme Scrub Old Pump New Pump
17 19.24
NOTE 3: Starting with Charger serial # CP240548022382 the charger software can be programmed with a computer and the QuiQ Programmer kit 56315732. The On-Board Charger is only available as a field kit (56315846) on Nilfisk models.
FORM NO. 56042451
22
FORM NO. 56042451
CHEMICAL ASSEMBLY (AXP MODELS ONLY) Convertamatic™ / BA 625, 725, 825
04-11 05-12
04-11 08-4
CHEMICAL ASSEMBLY (AXP MODELS ONLY) Convertamatic™ / BA 625, 725, 825
Item
Ref. No. Qty
Description
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ** ** **# 15 19 20 21 22 23
56315501 1 56003699 1 56315241 1 56315340 1 56315476 1 56315515 1 56315522 1 56315524 3 56002877 2 56002701 2 56002035 2 56315265 1 56219932 2 56412187 1 56315502 1 56315535 A/R 56315537 A/R 56315503 A/R 56315511 1 56315517 1 56315527 1 56315523 1 56315382 2 56003018 2
Chemical Tank Assy (1-8 & 22-23) NOTE 1 Bushing, 1/4 ID Snub Pump, Chemical Circuit Board Assy Bracket, Chemical Pump Bracket, Tank Mounting Check Valve, 1/8 Barb, 125PSI Hose, Chemical Resistant, 7” Nut, Hex Nyl Loc SS 8-32 Nut, Hex Nyl Loc 5/16-18 Scr, Hex Hd 5/16-18 x .62 Tee, Barb Clamp, Hose SAE #6 Hose, .38 Spiral Chemical Bottle As AXP Neutral Cleaner, 4 pack AXP Heavy Duty Cleaner & Degreaser, 4 pack Chemical Bottle Assy (14, 19, 20, 21) Indicator Assy Cap Insert, Dry Break Cap, Dry Break, 1/8 Barb, 90° Clip, Conduit Scr, Pan Phil SS 8-32 x .38
23
** = Optional, Not Included # = Revised or new since last update NOTE 1: The Chemical Assembly is only available as a field kit on Nilfisk models.
FORM NO. 56042451
24
FORM NO. 56042451
PADDLE ASSEMBLY Convertamatic™ / BA 625, 725, 825
04-11 05-5
04-11 06-8 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
PADDLE ASSEMBLY Convertamatic™ / BA 625, 725, 825
Ref. No. Qty
Description
56315266 56396197 56397029 56315231 56325654 56002006 56003197 56003354 56003527 56003545 56009030 56009096 56009287 56315229 56315230 56315251 56315280 56397015 56397109 56397170 56397171 56397172 56478246 56481890
Assembly, Paddle TSBUS2005-898 / TSBUS2006-925 Potentiometer, 100k (R2) Potentiometer, 5k (R1) Harness, Handle Spring, Compression Wsh, Flt SAE #6 Scr, Pan Phil Plastite 6-18x.62 Scr, Pan Phil M4 X 12 Scr, Pan Phil Plastite 1/4-10x2.00 Scr, Pan Phil Plastite 8-10x.75 Scr, Pan Phil Thd Form 10-24x.38 Wsh, Flt .193 X .875 X .060 Scr, Pan Phil Type B 8x2.00 Paddle, Back Cover Paddle, Front Cover Weldment, Handle Bar Knob Cam Controller Sleeve Washer, Plastic Clamp Potentiometer Fork Tie, Cable Clamp, P
1 1 1 1 2 2 6 1 1 4 2 1 1 1 1 1 1 1 1 3 2 1 1 2
25
FORM NO. 56042451
26
FORM NO. 56042451
SQUEEGEE ASSEMBLY Convertamatic™ / BA 625, 725, 825
04-11
04-11
08-4 Item
1 2 3# 4# 5 6 7 8 9 10 11 12 13 14 15
SQUEEGEE ASSEMBLY Convertamatic™ / BA 625, 725, 825
Ref. No. Qty
Description
56315291 56315290 56315632 56324350 56370711 56002851 56002907 56002909 56002938 56003472 56003736 56009111 56315347 56315348 56315674 56314028 56314322 56314696 56314026 56314323 56314691 56314027 56314324 56314692 56314271 56314325 56314694 56471194
Squeegee Assembly “B” (24”/BA 625) Squeegee Assembly “C” (26” & 28”/BA 725) Squeegee Assembly “D” (32”/BA 825) Wheel Nut, Thumb Nut, Hex Nyl Loc-Thin SS 5/16-18 (Advance only) Nut, Hex Nyl Loc SS 6-32 (Advance only) Scr, Pan Phil SS 6-32x.38 Wsh, Flt SAE SS 5/16 Scr, Soc Shd .38 X 1.00 X 5/16-18 Scr, Hex Thd to Hd SS 5/16-18 x 3.00 Nut, Wing SS 1/4-20 Squeegee Blade kit (24”/BA 625) NOTE 1 Squeegee Blade kit (26” & 28”/BA 725) NOTE 1 Squeegee Blade kit (32”/BA 825) NOTE 1 Strap, Front “B” (24”/BA 625) Strap, Front “C” (26” & 28”/BA 725) Strap, Front “D” (32”/BA 825) Strap, Left Rear “B” (24”/BA 625) Strap, Left Rear “C” (26” & 28”/BA 725) Strap, Left Rear “D” (32”/BA 825) Strap, Right Rear “B” (24”/BA 625) Strap, Right Rear “C” (26” & 28”/BA 725) Strap, Right Rear “D” (32”/BA 825) Squeegee Tool, Cast “B” (24”/BA 625) Squeegee Tool, Cast “C” (26” & 28”/BA 725) Squeegee Tool, Cast “D” (32”/BA 825) Latch Assembly
1 1 1 2 2 2 2 2 2 2 2 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
27 Item
Ref. No. Qty
Description
** ** ** **
56315347 56315351 56314305 56315854
1 1 1 1
24”/BA 625 Squeegee Blade Kits Kit, Gum Rubber Squeegee Blade NOTE 1 Kit, Linatex Squeegee Blade NOTE 1 Kit, Neoprene Squeegee Blade NOTE 1 Kit, Squeegee Blade PU B NOTE 1
** ** ** **
56315348 56315352 56314062 56315855
1 1 1 1
26” & 28”/BA 725 Squeegee Blade Kits Kit, Gum Rubber Squeegee Blade NOTE 1 Kit, Linatex Squeegee Blade NOTE 1 Kit, Neoprene Squeegee Blade NOTE 1 Kit, Squeegee Blade PU C NOTE 1
** ** ** **
56315674 56314865 56314843 56315856
1 1 1 1
32”/BA 825 Squeegee Blade Kits Kit, Gum Rubber Squeegee Blade NOTE 1 Kit, Linatex Squeegee Blade NOTE 1 Kit, Neoprene Squeegee Blade NOTE 1 Kit, Squeegee Blade PU D NOTE 1
** = Optional, Not Included # = Revised or new since last update NOTE 1: All squeegee blade kits include both front and rear squeegee blades.
FORM NO. 56042451
04-11
WIRING DIAGRAM Convertamatic™ / BA 625, 725, 825
28
05-4
(OPTIONAL) ONBOARD BATTERY NOTE: CONNECT GRN WIRE TO F2 AND DISCONNECT CHARGER RED WIRE FROM F2 FOR CHARGER OPTION GRN INTERLOCK F2 RED B+ 1 2 BLK/WHT CIRCUIT BREAKER, 5 AMP B-
(OPTIONAL) CHEMICAL RATIO SENSOR
SUPPLY OUTPUT
-
BLK
2
YEL/GRN
COIL, RECYCLE SOLUTION SOLENOID (OPTIONAL)
RED/BLK YEL/BLU WHT/YEL
BLK
B+
A2 1210 SPEED CONTROLLER (1228 FOR 36V)
J2-2 B-
INPUT
BLK
J2-1
VIO/YEL
J2-8
WHT/GRN
BRUSH REMOVE BRUSH REMOVE RECYCLE PUMP SOL. PUMP B-1
RELAY N.O. RELAY COMMON J2-12 J1-8 J1-7
BLK
YEL/VIO
S4
1
BLK
2
S6
1
BLK
SWITCH, FLOAT
(OPTIONAL) R2
R1 POT. 5K OHM THROTTLE
POLARITY FOR DISC BRUSHES M2
RED
WHT
WHT
M2
+
M
BLK
M
-
WHT/GRA BLK
BLK
(OPTIONAL)
M3
WHT/GRA BLK
WHT
-
M
+
BLK
M9 + M
M
+
YEL/VIO
CHEMICAL PUMP
M3
-
-
MOTOR, RIGHT BRUSH
MOTOR, LEFT BRUSH WHT
BLK
MOTOR, LEFT BRUSH
POLARITY FOR CYLINDRICAL BRUSHES
-
+
ORN
BLU/WHT
BLU/WHT
K1
NOTE: SWITCH IS PART OF PUMP ASSEMBLY
BLK
MOTOR, RIGHT BRUSH WHT/RED
S1
(OPTIONAL) WHT/RED
-
(OPTIONAL) S2
MOTOR, LEFT SIDE BROOM
1
M11 WHT/RED
-
M
+
BLK
MOTOR, RIGHT SIDE BROOM RED
K2
2
+ M
36V ONLY
M10 + M
M7
1
RED
M4 MOTOR, VAC
2
-
GRN/BLK SOLUTION PUMP
M8 + M
ORN/RED RECYCLE PUMP
NOTE: SWITCH IS PART OF PUMP ASSEMBLY
BLU
BLK BLK M
FORM NO. 56042451
BLK
BLK BLU/WHT
2
BLK BRN
1
GRN/BLK
1
2
WHT
BLU
S5
SWITCH, FLOAT
WHT WHT BLU BLK BRN
POT. 100K OHM SPEED LIMIT
WHT
BLK
ORN/RED
2
MOTOR, WHEEL DRIVE
WHT
M
YEL/VIO
M2
ORN/BLU RED/BLK BLU/BLK
BLK
YEL/RED
PIN 14 - BRAKE (+) PIN 9 - STATUS PIN 6 - BRAKE (-) PIN 16 - REV PIN 5 - KSI PIN 13 - POT.LO PIN 4 - POT.WIPER PIN 3 - POT.HI PIN 18 - SPEED LIMIT POT
3
+
J2-6
MOTOR, BRUSH ACTUATOR
2
1
M1
M1 M
B-
BLK
SWITCH, FLOAT
BRN/BLK
-
BRUSH ACTUATOR 1
BRN
CIRCUIT BREAKER, 30 AMP
3
2
J2-4 RECOVERY TANK FULL SENSE
L2 1
BRN
BRUSH ACTUATOR 2
J2-11 CHEMICAL PUMP
RED/GRN
COIL, SOLUTION SOLENOID
F3
GRA/WHT
2
RECYCLE STOP SWITCH
J1-4 ORN/BLU STATUS J1-5 RED/BLK FOR/REV. WHT/GRA J2-5 BRUSH MOTOR SENSE J2-10 ORN
L1 1
REVERSE
VACUUM MOTOR SENSE
BLK/YEL
BRN
BLK
J2-9
M5
RECYCLE SOLUTION
COIL, VAC MOTOR CONTACTOR
-
B-4
J1-9
SOLUTION
J1-1 RECYCLE START SWITCH
BRN
B-3
VACUUM CONTACTOR
K2 (OPTIONAL) EM BRAKE 36V ONLY
B-2
BRUSH CONTACTOR
YEL/BLU
COIL, BRUSH MOTOR CONTACTOR
J1-2
SW, SPST KEY
J1-14 J1-12 J1-11 J1-10
VIO/BLK
WHT/BLK
BRN
J1-6
BRN K1
S3
SUPPLY
J2-7 B+2 J1-13 B+1
BRN
BLU/BLK
1 2 BRN RED CIRCUIT BREAKER, 5 AMP
RED 1
J1-3
A1 CONTROL BOARD
J2-3
BATTERY 24 VDC OR 36 VDC
F2
+
BBLK
BT1 +
RED
BRN/BLK
F1 1 2 FUSE, 150 A.
RED
RED/WHT
RED
04-11 08-4
WIRING DIAGRAM Convertamatic™ / BA 625, 725, 825
29
Item
Ref. No. Qty
Description
A1# # A2 BT1 F1 F2 F3 K1 K2 L1 L2 M1 * * * M2 * *
56315297 1 56315777 1 56315294 1 NA 4 56412089 1 56315255 1 56315256 1 56397088 1 56412179 1 56397203 1 56397203 1 56315062 1 56315377 1 56315378 4 56315379 2 56315056 1 56315376 4 56397138 4 56315061 1 56412287 1 56315056 1 56315376 4 56397138 4 56315061 1 56412287 1 56412218 1 56412300 1 56397098 1 56393303 1 56315241 1 56315108 1 56315132 1 56397029 1 56396197 1 NA 1 NA 1 56303553 1 56303526 A/R 56315096 1 56315096 1 56315096 1
Control Panel Assy (A1) NOTE 1 (Advance only) Control Panel Assy (A1) NOTE 2 Speed Control Battery Fuse, 150 Amp Circuit Breaker, 5 Amp Circuit Breaker, 30 Amp Contactor, Brush Motor Contactor, Vac Motor Solenoid, Solution Solenoid, Recycle Solution (Optional) Transaxle, 24v Motor Carbon Brush Neoprene Mounting Sleeve Motor, Left Brush (Disk) Carbon Brush Brush Spring Motor, Left Brush (Cylindrical) Brush / Spring Kit Motor, Right Brush (Disk) Carbon Brush Brush Spring Motor, Left Brush (Cylindrical) Brush / Spring Kit Motor, Vac (Advance only) Motor, Vac (Nilfisk only) Carbon Brush Set of 2 Motor, Brush Actuator Pump, Chemical (Optional) Pump, Solution Pump, Recycle (Optional) Potentiometer, 5K Ohm, Throttle Potentiometer, 100K Ohm, Speed Limit Part of M7 Part of M8 Switch, Key Set of 2 Replacement Keys Switch, Float Switch, Float (Optional / Recycle Start) Switch, Float (Optional / Recycle Stop)
*
56315124
1
* * * * * * * * * * *
56315747 56315340 56315249 56315751 56416445 56372673 56478523 56478246 56314119 56315838 56413883
1 1 1 1 3 8 2 9 1 2 2
Charger, Onboard 24V (Onboard Charger Models Only) NOTE 3 TSBUS2006-931 Thermistor Repair Kit for 56315124 Chemical Ratio Sensor (Chemical Models Only) Harness, Main TSBUS2006-926 / TSBUS2007-955 Vacuum Harness TSBUS2007-955 Cable Assy 4 AWG (Battery Cables) Boot, Battery Post Tie, Cable Tie, Cable Spacer. Battery Harness, Filter (Nilfisk only) Ferrite Bead Nilfisk Disk models only
* M3 * * * M4# # * M5 M6 M7 M8 R1 R2 S1 S2 S3 * S4 S5 S6
NOTE 1: Order this control panel assy if you have the “Old Pump” voltage reading across the solution pump (M7) leads. NOTE 2: Order this control panel assy if you have the “New Pump” voltage reading across the solution pump (M7) leads. Voltage Regular Scrub Old Pump New Pump
7 9.56
Heavy Scrub Old Pump New Pump
11.3 13.7
Extreme Scrub Old Pump New Pump
17 19.24
NOTE 3: Starting with Charger serial # CP240548022382 the charger software can be programmed with a computer and the QuiQ Programmer kit 56315732. The On-Board Charger is only available as a field kit (56315846) on Nilfisk models
* = Not Shown # = Revised or new since last update
FORM NO. 56042451
04-11
OPTIONAL KITS AND ACCESSORIES Convertamatic™ / BA 625, 725, 825
30 Ref. No. Qty
Description
** ** **#
56315168 56315312 56315732
1 1 1
Common Kits Extended Scrub Kit Squeegee Wand Kit QuiQ Programmer Kit NOTE 2 TSBUS2007-979
** ** ** ** ** ** **
56315322 56315323 56315324 56315864 56315325 56315326 56315327
A/R A/R A/R A/R A/R A/R A/R
Advance Only Kits Kit, 24” Disk Deck Assy Kit, 26” Disk Deck Assy Kit, 28” Disk Deck Assy Kit, 32” Disk Deck Assy Kit, 24” Cyl Deck Assy Kit, 26” Cyl Deck Assy Kit, 28” Cyl Deck Assy
** ** ** ** ** **
56315860 56315861 56315863 56315862 56315845 56315846
A/R A/R A/R A/R 1 1
Nilfisk Only Kits Kit, BA625 Disk Deck W/Squeegee Kit, BA725 Disk Deck W/Squeegee Kit, BA825 Disk Deck W/Squeegee Kit, BA725 Cyl Deck W/Squeegee EDS On-Board Chemical Kit On-Board Charger kit-EU
** ** ** **
56315347 56315351 56314305 56315854
1 1 1 1
24”/BA 625 Squeegee Blade Kits Kit, Gum Rubber Squeegee Blade NOTE 1 Kit, Linatex Squeegee Blade NOTE 1 Kit, Neoprene Squeegee Blade NOTE 1 Kit, Squeegee Blade PU B NOTE 1
** ** ** **
56315348 56315352 56314062 56315855
1 1 1 1
26” & 28”/BA 725 Squeegee Blade Kits Kit, Gum Rubber Squeegee Blade NOTE 1 Kit, Linatex Squeegee Blade NOTE 1 Kit, Neoprene Squeegee Blade NOTE 1 Kit, Squeegee Blade PU C NOTE 1
** ** ** **
56315674 56314865 56314843 56315856
1 1 1 1
32”/BA 825 Squeegee Blade Kits Kit, Gum Rubber Squeegee Blade NOTE 1 Kit, Linatex Squeegee Blade NOTE 1 Kit, Neoprene Squeegee Blade NOTE 1 Kit, Squeegee Blade PU D NOTE 1
08-4
Ref. No. Qty
Description
** ** **
56315316 56409441 56409823
A/R A/R A/R
Common Accessories Tote Bag Programmer, 1307 User Programmer Cable
** **#
56397453 56044331
6 A/R
Advance Only Accessories Indicator, Battery Level (1 per battery) Convertamatic Literature Pack
**#
56044403
A/R
Nilfisk Only Accessories BA 625, 725, 825 Literature Pack
** ** ** **#
56206987 56206117 56206079 56315772
4 4 4 4
**
56388109
A/R
*# *# *# *#
80567300 80566500 80564500 80564000
1 1 4 4
*# *#
80568700 80568400
1 1
Advance Optional Batteries Battery, 6V 180AH Gel Battery, 6V 195AH Wet Battery, 6V 235AH Wet Battery, 6V 255AH AGM Advance Optional Battery Chargers Charger, 24V 25A 110V Nilfisk Optional Batteries Battery, Complete 24v 174 A/H (set of 4) Battery, Complete 24v 180 A/H (set of 4) Battery, 6v 174 A/H Battery, 6v 180 A/H Nilfisk Optional Battery Chargers Charger, 24vdc, 20 Amp, 230vac (UK) Charger, 24vdc, 20 Amp, 230vac (EU)
* = Not Shown ** = Optional, Not Included # = Revised or new since last update
NOTE 1: All squeegee blade kits include both front and rear squeegee blades. NOTE 2: Starting with Charger serial # CP240548022382 the charger software can be programmed with a computer and the QuiQ Programmer kit 56315732.
FORM NO. 56042451
04-11 07-4
BRUSH SELECTOR GUIDE-DISK Convertamatic™ / BA 625, 725, 825
31
We provide brushes and pad holders that will give you the best possible performance between machine and floor. Following are descriptions of the materials and their applications. Union Mix: ProLite: Prolene: Magna Grit: Dyna Grit: MidLite Grit: MidGrit: AgLite Grit: Short Trim Pad Holder:
Medium grade natural fibers for polishing finished floors with standard-speed equipment. Recommended for use in place of white pads. Bristles are made from light-duty polypropylene for general scrubbing when you do not want to scratch or remove finish from the floor. Recommended for use in place of red pads. Polypropylene material for medium-duty scrubbing on concrete, terrazzo and vinyl floor tile. Recommended for use in place of green or blue pads. For extreme heavy-duty scrubbing or stripping of floors. This brush has extra large diameter silicon carbide grit impregnated synthetic bristles. Recommended for use in place of black pads. For aggresive, heavy-duty scrubbing or stripping of floors. Recommended for use in place of brown pads. For general purpose scrubbing of sealed or unsealed concrete, stone, terrazzo, quarry tile and other resilient hard floor surfaces. Recommended for use in place of green or blue pads. For general purpose scrubbing when you need a lighter action for sealed or unsealed concrete, stone, terrazzo, quarry tile and other resilient hard floor surfaces. Recommended for use in place of green or blue pads. For light scrubbing when used wet; buffing or polishing when used dry on urethane coated, sealed concrete or other resilient hard surface floors. Recommended for use in place of red or white pads. Made with a structural foam block and center ring for correct pad centering. It has a “shower feed” design for getting solution to the floor.
24”/BA 625 BRUSHES 56505750 - Short Trim Pad Holder 56505195 - Pad Retainer for 56505750 56505751 - MagnaGrit 56505752 - DynaGrit 56505753 - AgLite 56505754 - Prolene 56505755 - ProLite 56505756 - Union Mix 56505757 - MidGrit 56505758 - MidLite Grit
26” BRUSHES 56505760 - Short Trim Pad Holder 56505195 - Pad Retainer for 56505760 56505761 - MagnaGrit 56505762 - DynaGrit 56505763 - AgLite 56505764 - Prolene 56505765 - ProLite 56505766 - Union Mix 56505767 - MidGrit 56505768 - MidLite Grit
28”/BA 725 BRUSHES 56505800 - Short Trim Pad Holder 56505195 - Pad Retainer for 56505800 56505801 - MagnaGrit 56505802 - DynaGrit 56505803 - AgLite 56505804 - Prolene 56505805 - ProLite 56505806 - Union Mix 56505807 - MidGrit 56505808 - MidLite Grit
32”/BA 825 BRUSHES 56505830 - Short Trim Pad Holder 56505195 - Pad Retainer for 56505800 56505831 - MagnaGrit 56505832 - DynaGrit 56505833 - AgLite 56505834 - Prolene 56505835 - ProLite 56505836 - Union Mix 56505837 - MidGrit 56505838 - MidLite Grit
DISC BRUSH APPLICATION GUIDE (SUGGESTION ONLY) Application Stripping: Concrete Terrazzo Ceramic/Quarry tile Vinyl tile General Scrubbing: Concrete Terrazzo Ceramic/Quarry tile Marble Vinyl tile Raised-rubber tile Polishing: Raised Disc Tile Marble Vinyl tile
46 Grit
80 Grit
X X
X X X X
X
X
180 Grit
240 Grit
X X X
X X X
X
500 Grit
X X X X X
Prolene
Prolite
Union Mix
X X X X X X X X X
FORM NO. 56042451
32
04-11
BRUSH SELECTOR GUIDE-CYLINDRICAL Convertamatic™ / BA 625, 725, 825
07-4
We provide brushes and pad holders that will give you the best possible performance between machine and floor. Following are descriptions of the materials and their applications. 46 Grit Brush:
Most aggressive grit brush. Used primarily to clean heavy buildup on concrete floors in factories, or for heavy stripping of finish.
80 Grit Brush:
Medium aggressive grit brush. Good all-around brush for medium to heavy buildup removal. Can also be used for general stripping operations.
180 Grit Brush:
Least aggressive grit brush. Used for daily cleaning of hard-finished floors.
Polypropylene Brush:
Standard equipment brush. Low cost, yet effective in cleaning many common floor surfaces.
Stiff Nylon Brush:
Cleaning action similar to polypropylene. More durable and wear-resistant than polypropylene.
Soft Nylon Brush:
Least aggressive brush available. Used on soft-finish floors where a more aggressive brush would leave scratch marks, or in applications requiring very light cleaning.
24” BRUSHES 56314389 - Soft Nylon 56314390 - Hard Nylon 56314391 - Prolene 56314392 - 180 Grit 56314393 - 80 Grit 56314394 - 46 Grit
26” BRUSHES 56314383 - Soft Nylon 56314384 - Hard Nylon 56314385 - Prolene 56314386 - 180 Grit 56314387 - 80 Grit 56314388 - 46 Grit
28”/BA 725 BRUSHES 56412191 - Soft Nylon 56412192 - Hard Nylon 56412046 - Prolene 56412193 - 180 Grit 56412194 - 80 Grit 56412194 - 46 Grit
CYLINDRICAL BRUSH APPLICATION GUIDE (SUGGESTION ONLY) Application Stripping: Concrete Terrazzo Ceramic/Quarry tile Vinyl tile General Scrubbing: Concrete Terrazzo Ceramic/Quarry tile Marble Vinyl tile Raised-rubber tile
FORM NO. 56042451
46 Grit
80 Grit
X X
X X X X
X
X
180 Grit
Polypropylene
Stiff Nylon
X X X X X X
X X X
X X X X X
X
Soft Nylon
X X X X X
www.nilfisk-advance.com
© 2008
