Transcript
26mm (1")
Satisfy Professional's Needs
Cordless Combination Hammer BHR262, BHR262T 36V-2.6Ah HR262D, HR262TD 36V-2.2Ah Quick change chuck
Quick change chuck
Adapted for SDS-PLUS bits
Photo : BHR262 Tool does not come with bit.
Further evolution of Makita’s Cordless Hammer
Battery
BL3626 2.6Ah Fast Charging
22min.
Battery
BL3622A 2.2Ah Photo : HR262D
with Battery fuel gauge
Outstanding performance with 36V Lithium-ion battery
Comparison of Drilling Efficiency Bit diameter: 16.5mm
150
BHR262/T
Faster
100
24V Predecessor Model Slow
Fast
Test conditions: Drilled in concrete with compressive strength of 40N/mm2. Note: 1. It may differ under some conditions. 2. Numbers in the charts above are relative values when the capacity of Predecessor Model is indexed at 100.
Vibration absorbing Handle and Good tool-balance provide more control and comfort while minimizing hand fatigue.
The center of gravity closer to handle reduces weighs the burden that the tool front weighs. Vibration absorbing Handle reduces hand fatigue
Motor
Battery
The ergonomic design helps pushing pressure in line with center of bit axis .
3 mode operation
Elastomer
Quick change chuck
• Rotation + Hammering • Rotation only • Hammering only
to protect from external shock
(for BHR262T/ HR262TD only)
Dust cup (option) can be attached using adapter. (for BHR262/ HR262D only) Adapted for SDS-PLUS bits
Torque limiter When drill bit hits against reinforcements, Torque limiter operates to stop.
Variable speed control switch Reversing switch operable by one hand
One-touch sliding chuck for easy bit changes
Anti-slip rubberized soft grip
Chisel rotates full 360 degrees with 40 different locking positions.
LED job light with preglow and afterglow functions On pulling switch trigger, the light automatically turns on before motor starts turning. keeps on illuminating about 12-13 sec. after trigger release. Tool does not come with bit.
BHR262, BHR262T Fast Charging System
2.6Ah
HR262D, HR262TD Standard Charging System
BL3626
2.2Ah
(194873-2)
BL3622A (195410-5)
with Battery fuel gauge Charging time
Charging time
22min.
DC36RA for BL3626 only
60min.
DC36WA for BL3622A only
Battery Converter
Battery Converter
Battery Adapter
BCV01 (option)
BCV02 (option)
BAP36N (option)
Users, who have 2 units of 18V battery (BL1830), can make use of 36V cordless tools with BCV01.
Users, who have 2 units of 18V battery (BL1830), can make use of 36V cordless tools with BCV02.
enables to separate the battery from the tool to reduce the tool weight for less hand and arm fatigue.
18V x 2
for tools powered by two 18V batteries
18V x 2
for tools powered by two 18V batteries
with Battery fuel gauge
36V
for tools powered by a 36V battery
with Battery fuel gauge
Comparison of Drilling Efficiency Bit diameter: 10.5mm
105
BHR262, BHR262T
100
Competitor "D"
80
80
60 80
Competitor "H"
95
Competitor "H’"
100
Competitor "B"
65
slow 0
70
24V Predecessor model
Competitor "B"
Competitor "H"
105
BHR262, BHR262T
70
24V Predecessor model
Competitor "D"
Bit diameter: 16.5mm
90
85
Competitor "H’"
100
110 fast
slow 0
80
90
100
110 fast
Test conditions: Drilled in concrete with compressive strength of 40N/mm2. Note: 1. It may differ under some conditions. 2. Numbers in the charts above are relative values when the capacities of Competitor "B" are indexed at 100.
Cordless Combination Hammer Variable Speed
Dust Collecting
Reversing
Built-in Job Light
SDS-PLUS Shank
Carrying Case
442
26mm (1") Adapted for SDS-PLUS bits
Quick Change Drill Chuck
Torque Limiter Capacity Impacts per minute (ipm) No load speed (rpm) Dimensions (L x W x H) Net Weight*
BHR262 / HR262D
BHR262T / HR262TD
Concrete : 26mm (1") Steel : 13mm (1/2") Wood : 32mm (1-1/4") 0-4,800 0-1,200 363x104x235mm (14-1/4"x4-1/8"x9-1/4") 4.5kg (9.9lbs)
Concrete : 26mm (1") Steel : 13mm (1/2") Wood : 32mm (1-1/4") 0-4,800 0-1,200 387x104x235mm (15-1/4"x4-1/8"x9-1/4") 4.8kg (10.6lbs)
Standard Equipment : Fast Charger (BHR262/T), Charger (HR262D/TD), Battery Cartridge, Depth Gauge, Side Grip (Tool does not come with bit.) *weight according to EPTA-Procedure 01/2003
Items of standard equipment and specifications may vary by country or area.
Makita Corporation 3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan PRINTED IN JAPAN BC-AE
