Transcript
Satisfy Professional's Needs
Cordless Concrete Nailer GN420C
Cordless nailer to drive pins into concrete
Battery
Fuel cell
Accessories Concrete pin
Removable magazine assembly
Includes one Fuel cell / box.
Short magazine assembly
Box : 10pins/strip x 100 = 1,000pins
Magazine capacity: 20 pins (2 strips)
for Europe
Part No. 196246-5
Description
Premium pin
Standard pin
Dia. (mm)
3.1
2.6
Length (mm)
Part No.
15
196285-5
17
196286-3
22
196287-1
27
196288-9
32
196289-7
20
196290-2
25
196291-0
30
196292-8
35
196293-6
40
196294-4
Long magazine assembly Magazine capacity: 40 pins (4 strips)
Part No. 196247-3
Battery Cleaner kit Contains the following accessories in a special Tool bag: Cleaner/ 1, Lubricating oil/ 1, Hex wrench 4/ 1, Brush/ 1, Cotton waste/ 1
BL7010 (7.2V 1.0Ah)
Part No. 194852-0
Part No. 194355-4
Service kit
Charger
Part No. 196234-2
Charging time 30minutes DC10WA
DC07SA
Cordless Concrete Nailer GN420C Depth Adjusting Built-in Job Light Carrying Case
Capacity
Length : Diameter : Magazine capacity Dimensions (L x W x H) Net Weight*
15 - 40mm (5/8" - 1-9/16") 2.6 - 3.1mm (0.102" - 0.122") 20pins (Short magazine) 40pins (Long magazine) 315x108x390mm (Short magazine) (12-3/8"x4-1/4"x15-3/8") 430x108x390mm (Long magazine) (17"x4-1/4"x15-3/8") 3.6kg (7.9lbs) (Short magazine) 3.8kg (8.3lbs) (Long magazine)
Standard Equipment : Safety Goggles, Hex Wrench *weight according to EPTA-Procedure 01/2003 Items of standard equipment and specifications may vary by country or area.
Makita Corporation
3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan PRINTED IN JAPAN BD-AD
Lightweight body with slim n for better maneuverability
Best possible ergon rubberized soft grip Flat top housing
Easy-to-grip yet hard-tocontrol and better mane
enables the machine to be placed upside down for rest.
Fuel cell Work amount: 1,200 shots (approx.)
Li-ion battery BL7010 7.2V 1.0Ah as the power source for ignition spark, gas mixing, air intake/exhaust and supply of cooling air.
Lightweight at
3.6kg(7.9lbs) with Short magazine assembly,
Battery and Hook without Fuel gas cell
Long magazine Capacity: 40 pins (4 strips)
Concrete pin
Capacity Length: 15 - 40mm (5 Gauge (Shank diame Collation angle/ mat
nose LED job light
nomic handle with p
-slip design provides more euverability in any application.
• convenient for work in dark areas • can be turned on/off with an independent switch.
Slim nose Removable magazine assembly In addition to Short magazine assembly drawn above, Long magazine assembly is also available.
Magazine cap The proper height and flat bottom surface helps operator drive nails straight in concrete.
• allows better visibility for easy access to the point you aim at. • enables to shoot pins into tight spaces such as narrow metal studs, etc.
Dual position hook convenient for hanging the machine on a rafter or steel pipe
Tool-less driving depth adjustment Simply by turning a dial, you are able to adjust the driving depth within a range of 4.5mm depending on the hardness of workpiece or the strength of concrete.
Short magazine Capacity: 20 pins (2 strips)
5/8” - 1-9/16”) eter): 2.6 - 3.1mm (0.102” - 0.122”) terial: Straight/ Plastic
LED indication lamp with two convenient functions 1. Battery power warning • Blinking red warns that the remaining battery capacity is getting low. • Solid red warns that recharging is required. 2. Trouble detection If trouble is detected, this function warns user by green/red alternate blinking and orange blinking.
