Transcript
Rechargeable
TM
Safety Information
CORDLESS SHAVER Protective Cover
• Keep the shaver clean at all times. • Do NOT immerse the shaver in water or any other liquid (Picture 1).
• Do NOT place the shaver in direct
Foil Screen
sunlight or near heat or fire (Picture 2).
Trimmer
Charging Make sure that the power switch is OFF, otherwise the shaver will not charge. Insert the plug into the outlet, as shown. The Charging Indicator will flash on.
Shaver Head
• Do NOT allow the net-blade to come in contact with sharp or hard objects, including fingernails. It is extremely thin and could become damaged and harm your skin (Picture 3).
Shaver Blades Release Button
• If the shaver or cord becomes damaged
Power Switch
in any way, take it to a service repair center. Do NOT attempt to repair the shaver yourself. Electric shock may occur.
Charging Indicator Cleaning Brush
When charging the shaver for the first time, charge it for 12 continuous hours. The shaver only needs to be charged for 7-10 hours every time after that. The shaver may be used for about 7 days after charging. It is best to use all of the energy in the shaver before recharging it. This will prolong the life of the product. Charging power: 100-120V, 60Hz.
*Design and color may vary.
Operation
Cleaning & Maintenance
• Remove the protective cover (Picture 4). • To begin shaving, push the button 5
Make sure the unit is OFF before cleaning.
• You will get the best results if skin is
Next use the supplied brush to remove the clippings from the top of the foil screen (Picture 7).
to turn the unit ON as shown (Picture ).
dry while shaving and if you glide the shaver quickly over the skin using both straight and circular movements.
• Obtain the closest shave by using your free hand to stretch the skin taut while shaving.
• Turn the unit OFF and place the protective
First, remove the protective cover.
Push the release button and carefully pull the shaver head off. Clean the inside of the shaver head with the brush (Picture 8).
cover back on the blades when done.
• Pop the trimmer up on the back of the
unit by pushing the button up (Picture 6).
• Turn the unit ON to begin trimming your beard or mustache.
• Turn the unit OFF and push the trimmer back down when finished.
Carefully remove the blades one by one and clean them with the brush (Picture 9). Clean the area under the blades. Carefully reassemble the blades, shaver head and protective cap, making sure to put them back in their original placement.
TM
LICENSED PRODUCT Made for MerchSource, LLC under trademark license from Emerson Radio Corp. EMERSON AND EMERSON AND THE G-CLEF LOGO ARE TRADEMARKS AND/OR REGISTERED TRADEMARKS OF EMERSON RADIO CORP., PARSIPPANY, NJ, U.S.A. KEEP THIS MANUAL FOR REFERENCE AS IT CONTAINS IMPORTANT INFORMATION.
©2009 MerchSource, LLC. All Rights Reserved. Distributed by MerchSource, LLC, Foothill Ranch, CA 92610. The artwork and design of this manual are protected by US copyright law and may not be reproduced, distributed, displayed, published or used for any purpose without prior written permission. It is not permitted to alter, remove or reproduce any trademarks or copyright notice from this package. Printed China
Rechargeable
TM
Safety Information
CORDLESS SHAVER Protective Cover
• Keep the shaver clean at all times. • Do NOT immerse the shaver in water or any other liquid (Picture 1).
• Do NOT place the shaver in direct
Foil Screen
sunlight or near heat or fire (Picture 2).
Trimmer
Charging Make sure that the power switch is OFF, otherwise the shaver will not charge. Insert the plug into the outlet, as shown. The Charging Indicator will flash on.
Shaver Head
• Do NOT allow the net-blade to come in contact with sharp or hard objects, including fingernails. It is extremely thin and could become damaged and harm your skin (Picture 3).
Shaver Blades Release Button
• If the shaver or cord becomes damaged
Power Switch
in any way, take it to a service repair center. Do NOT attempt to repair the shaver yourself. Electric shock may occur.
Charging Indicator Cleaning Brush
When charging the shaver for the first time, charge it for 12 continuous hours. The shaver only needs to be charged for 7-10 hours every time after that. The shaver may be used for about 7 days after charging. It is best to use all of the energy in the shaver before recharging it. This will prolong the life of the product. Charging power: 100-120V, 60Hz.
*Design and color may vary.
Operation
Cleaning & Maintenance
• Remove the protective cover (Picture 4). • To begin shaving, push the button 5
Make sure the unit is OFF before cleaning.
• You will get the best results if skin is
Next use the supplied brush to remove the clippings from the top of the foil screen (Picture 7).
to turn the unit ON as shown (Picture ).
dry while shaving and if you glide the shaver quickly over the skin using both straight and circular movements.
• Obtain the closest shave by using your free hand to stretch the skin taut while shaving.
• Turn the unit OFF and place the protective
First, remove the protective cover.
Push the release button and carefully pull the shaver head off. Clean the inside of the shaver head with the brush (Picture 8).
cover back on the blades when done.
• Pop the trimmer up on the back of the
unit by pushing the button up (Picture 6).
• Turn the unit ON to begin trimming your beard or mustache.
• Turn the unit OFF and push the trimmer back down when finished.
Carefully remove the blades one by one and clean them with the brush (Picture 9). Clean the area under the blades. Carefully reassemble the blades, shaver head and protective cap, making sure to put them back in their original placement.
TM
LICENSED PRODUCT Made for MerchSource, LLC under trademark license from Emerson Radio Corp. EMERSON AND EMERSON AND THE G-CLEF LOGO ARE TRADEMARKS AND/OR REGISTERED TRADEMARKS OF EMERSON RADIO CORP., PARSIPPANY, NJ, U.S.A. KEEP THIS MANUAL FOR REFERENCE AS IT CONTAINS IMPORTANT INFORMATION.
©2009 MerchSource, LLC. All Rights Reserved. Distributed by MerchSource, LLC, Foothill Ranch, CA 92610. The artwork and design of this manual are protected by US copyright law and may not be reproduced, distributed, displayed, published or used for any purpose without prior written permission. It is not permitted to alter, remove or reproduce any trademarks or copyright notice from this package. Printed China
Rechargeable
TM
Safety Information
CORDLESS SHAVER Protective Cover
• Keep the shaver clean at all times. • Do NOT immerse the shaver in water or any other liquid (Picture 1).
• Do NOT place the shaver in direct
Foil Screen
sunlight or near heat or fire (Picture 2).
Trimmer
Charging Make sure that the power switch is OFF, otherwise the shaver will not charge. Insert the plug into the outlet, as shown. The Charging Indicator will flash on.
Shaver Head
• Do NOT allow the net-blade to come in contact with sharp or hard objects, including fingernails. It is extremely thin and could become damaged and harm your skin (Picture 3).
Shaver Blades Release Button
• If the shaver or cord becomes damaged
Power Switch
in any way, take it to a service repair center. Do NOT attempt to repair the shaver yourself. Electric shock may occur.
Charging Indicator Cleaning Brush
When charging the shaver for the first time, charge it for 12 continuous hours. The shaver only needs to be charged for 7-10 hours every time after that. The shaver may be used for about 7 days after charging. It is best to use all of the energy in the shaver before recharging it. This will prolong the life of the product. Charging power: 100-120V, 60Hz.
*Design and color may vary.
Operation
Cleaning & Maintenance
• Remove the protective cover (Picture 4). • To begin shaving, push the button 5
Make sure the unit is OFF before cleaning.
• You will get the best results if skin is
Next use the supplied brush to remove the clippings from the top of the foil screen (Picture 7).
to turn the unit ON as shown (Picture ).
dry while shaving and if you glide the shaver quickly over the skin using both straight and circular movements.
• Obtain the closest shave by using your free hand to stretch the skin taut while shaving.
• Turn the unit OFF and place the protective
First, remove the protective cover.
Push the release button and carefully pull the shaver head off. Clean the inside of the shaver head with the brush (Picture 8).
cover back on the blades when done.
• Pop the trimmer up on the back of the
unit by pushing the button up (Picture 6).
• Turn the unit ON to begin trimming your beard or mustache.
• Turn the unit OFF and push the trimmer back down when finished.
Carefully remove the blades one by one and clean them with the brush (Picture 9). Clean the area under the blades. Carefully reassemble the blades, shaver head and protective cap, making sure to put them back in their original placement.
TM
LICENSED PRODUCT Made for MerchSource, LLC under trademark license from Emerson Radio Corp. EMERSON AND EMERSON AND THE G-CLEF LOGO ARE TRADEMARKS AND/OR REGISTERED TRADEMARKS OF EMERSON RADIO CORP., PARSIPPANY, NJ, U.S.A. KEEP THIS MANUAL FOR REFERENCE AS IT CONTAINS IMPORTANT INFORMATION.
©2009 MerchSource, LLC. All Rights Reserved. Distributed by MerchSource, LLC, Foothill Ranch, CA 92610. The artwork and design of this manual are protected by US copyright law and may not be reproduced, distributed, displayed, published or used for any purpose without prior written permission. It is not permitted to alter, remove or reproduce any trademarks or copyright notice from this package. Printed China
Rechargeable
TM
Safety Information
CORDLESS SHAVER Protective Cover
• Keep the shaver clean at all times. • Do NOT immerse the shaver in water or any other liquid (Picture 1).
• Do NOT place the shaver in direct
Foil Screen
sunlight or near heat or fire (Picture 2).
Trimmer
Charging Make sure that the power switch is OFF, otherwise the shaver will not charge. Insert the plug into the outlet, as shown. The Charging Indicator will flash on.
Shaver Head
• Do NOT allow the net-blade to come in contact with sharp or hard objects, including fingernails. It is extremely thin and could become damaged and harm your skin (Picture 3).
Shaver Blades Release Button
• If the shaver or cord becomes damaged
Power Switch
in any way, take it to a service repair center. Do NOT attempt to repair the shaver yourself. Electric shock may occur.
Charging Indicator Cleaning Brush
When charging the shaver for the first time, charge it for 12 continuous hours. The shaver only needs to be charged for 7-10 hours every time after that. The shaver may be used for about 7 days after charging. It is best to use all of the energy in the shaver before recharging it. This will prolong the life of the product. Charging power: 100-120V, 60Hz.
*Design and color may vary.
Operation
Cleaning & Maintenance
• Remove the protective cover (Picture 4). • To begin shaving, push the button 5
Make sure the unit is OFF before cleaning.
• You will get the best results if skin is
Next use the supplied brush to remove the clippings from the top of the foil screen (Picture 7).
to turn the unit ON as shown (Picture ).
dry while shaving and if you glide the shaver quickly over the skin using both straight and circular movements.
• Obtain the closest shave by using your free hand to stretch the skin taut while shaving.
• Turn the unit OFF and place the protective
First, remove the protective cover.
Push the release button and carefully pull the shaver head off. Clean the inside of the shaver head with the brush (Picture 8).
cover back on the blades when done.
• Pop the trimmer up on the back of the
unit by pushing the button up (Picture 6).
• Turn the unit ON to begin trimming your beard or mustache.
• Turn the unit OFF and push the trimmer back down when finished.
Carefully remove the blades one by one and clean them with the brush (Picture 9). Clean the area under the blades. Carefully reassemble the blades, shaver head and protective cap, making sure to put them back in their original placement.
TM
LICENSED PRODUCT Made for MerchSource, LLC under trademark license from Emerson Radio Corp. EMERSON AND EMERSON AND THE G-CLEF LOGO ARE TRADEMARKS AND/OR REGISTERED TRADEMARKS OF EMERSON RADIO CORP., PARSIPPANY, NJ, U.S.A. KEEP THIS MANUAL FOR REFERENCE AS IT CONTAINS IMPORTANT INFORMATION.
©2009 MerchSource, LLC. All Rights Reserved. Distributed by MerchSource, LLC, Foothill Ranch, CA 92610. The artwork and design of this manual are protected by US copyright law and may not be reproduced, distributed, displayed, published or used for any purpose without prior written permission. It is not permitted to alter, remove or reproduce any trademarks or copyright notice from this package. Printed China
Rechargeable
TM
Safety Information
CORDLESS SHAVER Protective Cover
• Keep the shaver clean at all times. • Do NOT immerse the shaver in water or any other liquid (Picture 1).
• Do NOT place the shaver in direct
Foil Screen
sunlight or near heat or fire (Picture 2).
Trimmer
Charging Make sure that the power switch is OFF, otherwise the shaver will not charge. Insert the plug into the outlet, as shown. The Charging Indicator will flash on.
Shaver Head
• Do NOT allow the net-blade to come in contact with sharp or hard objects, including fingernails. It is extremely thin and could become damaged and harm your skin (Picture 3).
Shaver Blades Release Button
• If the shaver or cord becomes damaged
Power Switch
in any way, take it to a service repair center. Do NOT attempt to repair the shaver yourself. Electric shock may occur.
Charging Indicator Cleaning Brush
When charging the shaver for the first time, charge it for 12 continuous hours. The shaver only needs to be charged for 7-10 hours every time after that. The shaver may be used for about 7 days after charging. It is best to use all of the energy in the shaver before recharging it. This will prolong the life of the product. Charging power: 100-120V, 60Hz.
*Design and color may vary.
Operation
Cleaning & Maintenance
• Remove the protective cover (Picture 4). • To begin shaving, push the button 5
Make sure the unit is OFF before cleaning.
• You will get the best results if skin is
Next use the supplied brush to remove the clippings from the top of the foil screen (Picture 7).
to turn the unit ON as shown (Picture ).
dry while shaving and if you glide the shaver quickly over the skin using both straight and circular movements.
• Obtain the closest shave by using your free hand to stretch the skin taut while shaving.
• Turn the unit OFF and place the protective
First, remove the protective cover.
Push the release button and carefully pull the shaver head off. Clean the inside of the shaver head with the brush (Picture 8).
cover back on the blades when done.
• Pop the trimmer up on the back of the
unit by pushing the button up (Picture 6).
• Turn the unit ON to begin trimming your beard or mustache.
• Turn the unit OFF and push the trimmer back down when finished.
Carefully remove the blades one by one and clean them with the brush (Picture 9). Clean the area under the blades. Carefully reassemble the blades, shaver head and protective cap, making sure to put them back in their original placement.
TM
LICENSED PRODUCT Made for MerchSource, LLC under trademark license from Emerson Radio Corp. EMERSON AND EMERSON AND THE G-CLEF LOGO ARE TRADEMARKS AND/OR REGISTERED TRADEMARKS OF EMERSON RADIO CORP., PARSIPPANY, NJ, U.S.A. KEEP THIS MANUAL FOR REFERENCE AS IT CONTAINS IMPORTANT INFORMATION.
©2009 MerchSource, LLC. All Rights Reserved. Distributed by MerchSource, LLC, Foothill Ranch, CA 92610. The artwork and design of this manual are protected by US copyright law and may not be reproduced, distributed, displayed, published or used for any purpose without prior written permission. It is not permitted to alter, remove or reproduce any trademarks or copyright notice from this package. Printed China
Rechargeable
TM
Safety Information
CORDLESS SHAVER Protective Cover
• Keep the shaver clean at all times. • Do NOT immerse the shaver in water or any other liquid (Picture 1).
• Do NOT place the shaver in direct
Foil Screen
sunlight or near heat or fire (Picture 2).
Trimmer
Charging Make sure that the power switch is OFF, otherwise the shaver will not charge. Insert the plug into the outlet, as shown. The Charging Indicator will flash on.
Shaver Head
• Do NOT allow the net-blade to come in contact with sharp or hard objects, including fingernails. It is extremely thin and could become damaged and harm your skin (Picture 3).
Shaver Blades Release Button
• If the shaver or cord becomes damaged
Power Switch
in any way, take it to a service repair center. Do NOT attempt to repair the shaver yourself. Electric shock may occur.
Charging Indicator Cleaning Brush
When charging the shaver for the first time, charge it for 12 continuous hours. The shaver only needs to be charged for 7-10 hours every time after that. The shaver may be used for about 7 days after charging. It is best to use all of the energy in the shaver before recharging it. This will prolong the life of the product. Charging power: 100-120V, 60Hz.
*Design and color may vary.
Operation
Cleaning & Maintenance
• Remove the protective cover (Picture 4). • To begin shaving, push the button 5
Make sure the unit is OFF before cleaning.
• You will get the best results if skin is
Next use the supplied brush to remove the clippings from the top of the foil screen (Picture 7).
to turn the unit ON as shown (Picture ).
dry while shaving and if you glide the shaver quickly over the skin using both straight and circular movements.
• Obtain the closest shave by using your free hand to stretch the skin taut while shaving.
• Turn the unit OFF and place the protective
First, remove the protective cover.
Push the release button and carefully pull the shaver head off. Clean the inside of the shaver head with the brush (Picture 8).
cover back on the blades when done.
• Pop the trimmer up on the back of the
unit by pushing the button up (Picture 6).
• Turn the unit ON to begin trimming your beard or mustache.
• Turn the unit OFF and push the trimmer back down when finished.
Carefully remove the blades one by one and clean them with the brush (Picture 9). Clean the area under the blades. Carefully reassemble the blades, shaver head and protective cap, making sure to put them back in their original placement.
TM
LICENSED PRODUCT Made for MerchSource, LLC under trademark license from Emerson Radio Corp. EMERSON AND EMERSON AND THE G-CLEF LOGO ARE TRADEMARKS AND/OR REGISTERED TRADEMARKS OF EMERSON RADIO CORP., PARSIPPANY, NJ, U.S.A. KEEP THIS MANUAL FOR REFERENCE AS IT CONTAINS IMPORTANT INFORMATION.
©2009 MerchSource, LLC. All Rights Reserved. Distributed by MerchSource, LLC, Foothill Ranch, CA 92610. The artwork and design of this manual are protected by US copyright law and may not be reproduced, distributed, displayed, published or used for any purpose without prior written permission. It is not permitted to alter, remove or reproduce any trademarks or copyright notice from this package. Printed China
