Preview only show first 10 pages with watermark. For full document please download

Core Products - This Website Is Under Construction. Will Be Used For

Rating
Date

August 2018
Size

6.7MB
Views

8,544
Categories

Home Do-It-Yourself tools Garden tools Garden shredders

Transcript

CORE PRODUCTS SALES HANDBOOK TABLE OF CONTENTS KUBOTA COMPATIBILITY...............3 CC TO HP CONVERSION CHART.......4 FAQ................................................5 PRODUCT NOISE LEVELS..............10 CHIPPER COMMONALITIES...........11 CHIPPER/SHREDDERS..................12 Model: SC2170 Models: SC3206, SC3265, SC3306, SC3306E, SC3342 & SC3420 CHIPPER/SHREDDER/BLOWER....15 Models: SC5720B CHIPPERS.....................................16 Model: CH4400 Model: CH5653 Models: CH611DH & CH6720H SKID STEER CHIPPERS.................31 Models: CH450H, CH500H & CH800H LOG SPLITTERS............................32 Models: LS22 & LS27 WHEELED TRIMMERS....................33 Models: WT189, WT190, WT190T & WT190S STUMP GRINDER..........................35 Model: SG340 WHEELED VACUUMS.....................36 Models: WV160, WV160S, WV190 & WV190S DEBRIS LOADERS.........................37 Models: DL8, DL10 Model: DL12653, DL12720 ECHO BEAR CAT GEAR..................39 WARRANTY COVERAGE.................40 Models: CH8720iH & CH8993H U.S. and Canada Models: CH911DH & CH922DH All areas Outside the U.S. and Canada PTO MACHINES............................24 Model: SC5540 Model: SC5540B Model: CH45540 Models: CH5540 & CH5540H Model: CH8540 BELT REFERENCE GUIDE...............44 ROTOR & SHREDDER KNIVES KITS.45 BLADE KITS..................................46 ACCESSORIES...............................48 Models: CH9540H & CHF9540H 2 www.bearcatproducts.com Kubota Compatibility CH45540 15-28HP SC5540 25-45HP SC5540B 25-45HP CH5540 25-45HP CH5540H 25-45HP CH8540 35-60HP CH9540H 35-60HP CHF9540H 35-60HP CH500H 15-22GPM CH800H 25-38GPM BX1860 BX2360 BX2660 BX25 BX1870 BX2370 BX2670 BX25D B2650SD B3350HSD B3350SUHSD B2320 B2620 B2920 B2320DTN-1 B2320HSDN B3000B3200HSD B3200HSD B3300SUB26 B3300SU B26 L39 L45 M59 L3301 L3901 L4701 L3560 L4060 L4760 L5060 L5460 L6060 L3240 L3540 L3940 L4240 L4740 L5040 L5240 L5740 L3200 L3800 L4600 MX4700 GEAR 2WD 4WD MX4700 HST 4WD MX5100 GEAR 2WD 4WD MX5100HST 4WD M5640U M5640SUD M7040SU M7040SUD M7040SUH M7040SUHD M5140 M6040 M7040 M8540 M9540 M6060 M7060 SVL75 SVL75-2 SVL90 SVL90-2 888.625.4520 3 CC to HP CONVERSION CHART GASOLINE ENGINES cc Gross HP kW Model Number 148 3.5** 2.6 70530* - 5** 3.7 74050*, 73350* - 5** 3.7 75050*, 75350* 170 5.7 4.3 SC2170, LS22 160 4.4 3.3 WT160S (73455), WT160T (74455), WV160, WV160S 190 5.5 4.1 WT24, WT24S, WT24T, WT189 Vertical-Intek 190 6** 4.8 WV190* (75060), WV190S* (75360) Briggs & Stratton Vertical-Quantum 190 6.5** 4.8 WT190* (75065), WT190T* (76065), WT190S* (75365) Briggs & Stratton Vertical/Elec.-Quantum 190 6.5** 4.8 WT190SE (73265)* Briggs & Stratton Horizontal 205 5.5** 4.1 SC3206 (70050), SC2206 Subaru Horizontal 210 7 5.2 LS27 Honda Horizontal/Elec.-GX 242 8** 6.0 70385* Subaru Horizontal 265 9 6.7 SC3265 Honda Horizontal-GX 270 8.5 6.4 SC3270 (70380)*, SC3270T (70580)* Briggs & Stratton Horizontal/Elec. 305 8** 6.0 SC3305E (70085) Briggs & Stratton Horizontal 305 8** 6.0 SC3305 (70080) Briggs & Stratton Horizontal/IC 305 8** 6.0 70180* Briggs & Stratton Horizontal/Elec. 306 8** 6.0 SC3306, SC3306E Honda Vertical-GXV 340 8.9 6.6 SG340 (73711), 75011* Honda Vertical/Elec.-GXV 340 8.9 6.6 75111* Briggs & Stratton Horizontal-Intek 342 11** 8.3 SC3342 (75311) Honda Horizontal-GX 390 11.7 8.7 Subaru Horizontal 404 14 10.4 Engine Manufacturer Engine Type Briggs & Stratton Horizontal Briggs & Stratton Vertical Honda Vertical-GCV Subaru Horizontal Honda Vertical-GCV Subaru Vertical Briggs & Stratton DL8390, CH4390 (73413)* CH4400, DL8 Briggs & Stratton Horizontal 420 13 9.6 Briggs & Stratton Horizontal Vanguard 570 18 13.4 DL10570, DL10 (Elec. Start) SC3420 Honda Horizontal/Elec.-GX 614 20** 14.9 SC5614 (71020)*, CH6614 (71620)*, CH6614H (72620)* Subaru Horizontal/Elec. 653 22 16.4 CH5653,DL12653 Honda Horizontal/Elec.-GX 670 24** 17.9 CH6670H (76624)*, CH8670H (76824)*, SC5670 (75524)*, DL12670 (75124)* Subaru Horizontal/Elec. 720 25 18.6 DL12720,SC5720B, CH6720H Subaru Horizontal/Elec./Fuel Injected 720 28 20.9 CH8720iH Briggs & Stratton Horizontal/Elec.-Vanguard 993 35 26.1 CH6993H (76635)*, CH8993H (76835) Kohler Horizontal/Elec. 730 25 18.6 CH6730H DIESEL ENGINES Engine Manufacturer Engine Type Liters Gross HP kW Model Number Kubota 1105/Mech. 1.1 24.8 18.5 CH611DH (76628) Kubota 1105/Mech. 1.1 24.8 18.5 CH911DH (72928) Kubota 2203/Mech. 2.2 50 36.8 CH922DH (74950) *A non-current ECHO Bear Cat model number **Horsepower rating based on Engine Manufacturer at time of manufacture 4 www.bearcatproducts.com FAQ CHIPPER/SHREDDERS MODELS: SC2170, SC3206, SC3265, SC3306, SC3306E**, SC3342, SC3420, SC5540, SC5540B* & SC5720B** What are these machines designed for? The ECHO Bear Cat chipper/shredders are designed to effectively reduce the volume of wood, leaves and other organic material. When should I chip? If you don’t plan on composting the material, material is green and stringy or larger than .75" in diameter. When should I shred? If you plan on composting or if the material is smaller than .75", use the shredder. Shredding is also an efficient way to reduce the volume of leaves or prunings. How long will the chipper blades last? Depending on the type of wood, age and cleanliness, chipper blades will work well for between 5-15 hours. Dry, dirty wood will dull the blades faster. Alternate dry and wet material to extend blade life. What is the maximum size of material will these machines chip or shred? ECHO Bear Cat 2" chipper/shredders will chip up to 2" (5cm) and shred up to .75" (2cm) diameter material. ECHO Bear Cat 3" chipper/shredders will chip up to 3" (8cm) and shred up to .75" (2cm) diameter material. ECHO Bear Cat 5" chipper/shredders will chip up to 5" (13cm) and shred up to .75" (2cm) diameter material. Do not attempt to put material larger than .75" in diameter into the shredder hopper. Doing so may cause machine failure and will void the warranty. *PTO Machines **Electric start models do not include battery. LOG SPLITTERS MODELS: LS22 & LS27 What is the cycle time? The LS22 has a cycle time of 12 seconds and the LS27 has a cycle time of 14 seconds. Does my splitter come with hydraulic fluid? The hydraulic system on this log splitter comes filled with high performance Automatic Transmission Fluid (ATF) to accommodate operation in temperatures below 32 degrees F (0 degrees C). When adding or replacing ATF, use a Dexron® III or Mercon® qualified product. Check the fluid on level ground with the jack stand in the down position. DO NOT MIX HYDRAULIC FLUID WITH ATF. THIS MAY DAMAGE THE SYSTEM AND COULD VOID WARRANTY. DO NOT OVERFILL. FILL THE HYDRAULIC FLUID TANK WITH THE RAM RETRACTED. What size logs can I split? The maximum length of log that you can split is 24" (60.9cm) long. You can split larger diameter logs with the unit in the vertical position. How difficult is it to perform maintenance on the machine? ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important. 888.625.4520 5 FAQ WHEELED TRIMMERS MODELS: WT189, WT190, WT190T & WT190S Can I operate the Wheeled Trimmer on a hillside? The ECHO Bear Cat Wheeled Trimmer is capable of continuous operation on a slope not to exceed 15 degrees. Limited operation on slopes greater than 15 degrees is allowed. Do the engines have an oil pump? No. The engines obtain lubrication from a “Splash Lube” system. How do I change the trimming line? To wrap the cutting string in the standard configuration, feed the cutting string through the second hole on either end of the trimmer head leaving approximately 8 inches for the cutting surface. Total recommended string length is 20-1/2". Continue by weaving the cutting string through the first hole directly beside the second hole. Loop the cutting string back and feed through the first hole on the opposite end of the trimmer head. Pull the cutting string tight. Feed through the remaining second hole and pull the cutting string tight. The cutting strings in the middle two holes should be the same length. If the length differs, cut to an even length. It may be necessary to remove pieces of broken or worn string before new string can be properly installed. How many speeds does the Self-Propelled Wheeled Trimmer (WT190S) have and how fast does it go? There are three separate gears on the transmission of the Self-Propelled Wheeled Trimmers, and the speeds range from 1 to 3 mph. What is the Sabre Tooth Blade and Triple Blade Brush Cutter used for? The Sabre Tooth Blade (14" dia.) is designed to be used for cutting small trees, saplings, bushes etc. up to 4" in diameter. The Nylon Blade Kit is designed for the heavy grass, weeds and brush growth. Do the Sabre Tooth blade and Triple Blade Brush Cutter fit all WT189 & WT190 models? Yes. By removing the mow ball both accessories will work and can be height adjusted to preference. How difficult is it to perform maintenance on the machine? ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important. STUMP GRINDER MODEL: SG340 What is the application of the Stump Grinder? The ECHO Bear Cat Stump Grinder is designed with a compact 23" wheel base, enabling it to be used on stumps found in places large stump grinders cannot get to. How do I engage the Stump Grinder? Position the stump grinder so the cutter head is adjacent to the stump. Start the stump grinder and hold up the bottom bail so it doesn't shut off. Pull the top bail to the handle and hold it there to activate the left wheel brake, holding it so it does not turn. Gradually, using the locked left tire as a pivot point, slowly pivot the cutter head until the cutting teeth contact the stump. Pivot the stump grinder on the left wheel in a slow, smooth sweeping motion from left to right as the teeth grind the stump. Do not force the cutting teeth. Check position by watching through the screen opening. Grind the stump down to a maximum of 4 inches below ground level. How difficult is it to perform maintenance on the machine? ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important. 6 www.bearcatproducts.com FAQ CHIPPERS MODELS: CH4400, CH45540, CH5653, CH5540, CH5540H, CH611DH, CH6720H, CH8540, CH8993H, CH8720iH, CH9540H, CHF9540H, CH911DH & CH922DH What are these machines designed for? The ECHO Bear Cat chipper is designed to effectively reduce the volume of wood, branches, and other organic material. The typical application for this product group is anywhere from light commercial to municipalities and/or rental. What types of chippers are available? ECHO Bear Cat makes chippers with gravity or hydraulic feed, powered by an engine package or a tractor PTO. A hydraulic feed machine has a hydraulic driven feed roller to efficiently feed branches to the chipper rotor. When should I buy a gravity feed machine? If you have an infrequent need for a chipper and time is not a factor, a gravity feed machine will fit your needs. When should I buy a hydraulic feed machine? If time or efficiency is an issue, a hydraulic feed chipper allows you to be more productive. What does it mean when you say hydraulic feed chippers feature an "Auto Feed" system? "Auto Feed" refers to the way the system senses if the rotor has slowed down too much for maximum chipping performance. When this happens, the feed roller stops feeding the material, allowing the engine and rotor RPM to recover. Once the engine and rotor RPM have recovered sufficiently, the feed roller reengages and begins feeding material again. It has also been referred to as the "try again" feature. How long will the chipper blades last? Depending on the type of wood, age and cleanliness, chipper blades will work well for between 5-15 hours. Dry, dirty wood will dull the blades faster. Alternate dry and wet material to extend blade life. Hydraulic feed chippers will have longer blade life. How difficult is it to perform maintenance on the machine? ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important. Will electric start chippers include the starting battery? No. ECHO Bear Cat products are not shipped with a battery and will need to be purchased separately. POWER TAKE OFF (PTO) MACHINES MODELS: CH45540, CH5540, CH5540H, SC5540, SC5540B, CH8540, CH9540H & CHF9540H When do I buy a chipper powered by a tractor Power Take Off (PTO) vs. an engine-driven unit? If you own a tractor a PTO chipper is a smart economic choice. What are the tractor requirements for these chippers and chipper/shredders? The ECHO Bear Cat 4.5" chipper requires a tractor with PTO hp ranging from 15hp to 28hp. The ECHO Bear Cat 5" chippers and chipper/ shredders require a tractor with PTO hp ranging from 25hp to 45hp. The ECHO Bear Cat 8" and 9" chippers require a tractor with PTO hp ranging from 35hp to 60hp. Will the chipper fit my tractor? The ECHO Bear Cat chippers and chipper/shredders are designed to fit all Category 1 three-point hitches. Chipper weight and tractor hp needs to be taken into consideration. All Chipper models fit a Category 1 Quick Hitch. 888.625.4520 7 FAQ SKID STEER CHIPPERS MODELS: CH450H, CH500H & CH800H What is this machine designed for? The ECHO Bear Cat chipper is designed to effectively reduce wood, brush, and other organic material while using your skid steer as the power unit. What is the capacity and hydraulic flow requirements of these machines? The CH450H has a maximum capacity of 4.5" (11cm) and requires at least 11 to 15 GPM (41.6 to 56.8 LPM) on a mini skid steer. The CH500H has a maximum capacity of 5" (13cm) and requires at least 15 to 22 GPM (56.7 to 83.3 LPM) on a low-flow skid steer. The CH800H has a maximum capacity of 8" (20cm) and requires at least 25 to 38 GPM (94.6 to 43.8 LPM) on a hi-flow skid steer. Will the chipper fit my skid steer? The ECHO Bear Cat CH500H and CH800H skid steer chippers are equipped with universal attachment ends, capable of hooking up to most skid steers. The CH450H is designed to mount to mini skid steers. How long will the chipper blades last? Depending on the type of wood, age and cleanliness, chipper blades will work well for between 5-15 hours. Dry, dirty wood will dull the blades faster. Alternate dry and wet material to extend blade life. Hydraulic feed chippers will have longer blade life. How difficult is it to perform maintenance on the machine? ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important. WHEELED VACUUMS MODELS: WV190, WV190S, WV160 & WV160S Where can I use the Wheeled Vacuum? The Wheeled Vacuum is designed to be used for residential, commercial or municipal pickup of leaves, grass or other light debris. How much reduction of debris will I get? There is not much reduction; however, by passing through a six-bladed fan into the bag some natural breakage occurs allowing the five-bushel bag to be filled. Reduction through compaction will happen. Is it hard to push the Wheeled Vacuum on turf? The large wheels have ball bearing hubs that allow easy movement. How many speeds do the Self-Propelled Wheeled Vacuums have and how fast does it go? There are three separate gears on the transmission of the Self-Propelled Wheeled Vacuum, and the speed range is 1 to 3 mph. How many height adjustments does the Wheeled Vacuum have? The Wheeled Vacuum can be adjusted into four different nozzle settings ranging from .25" - 4.5" (.64cm-11.4cm) to accommodate all types of terrain. What do I use the optional 4" (10.1cm) Vacuum Hose Kit for? This hose kit is designed to allow vacuuming hard to reach places. How difficult is it to perform maintenance on the machine? ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important. 8 www.bearcatproducts.com FAQ DEBRIS LOADERS MODELS: DL8, DL10, DL12653 & DL12720 What is the application for the Debris Loader? The Debris Loader is used for commercial or municipal pickup of leaves, grass, or other light debris. How much reduction of debris will I get? There is very limited reduction of the material due to the design for compaction vs. reduction. The Debris Loader is designed to effectively load leaves, grass, or other light debris from the ground to a vehicle collection bin. Is there a rental application for this machine? Yes. Commercial landscapers and municipalities will have a seasonal need for this piece of equipment. How difficult is it to perform maintenance on the machine? ECHO Bear Cat products are designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important. Will electric start Debris Loaders include the starting battery? No. ECHO Bear Cat products are not shipped with a battery and will need to be purchased separately. "I have a chipper that requires the belt to be engaged. How do I engage and disengage the belt without it squealing and causing damage to the belt or other drive components?" ENGAGING THE BELT: 1. AFTER engine is warmed and ready for use, move the throttle control back down to approximately 25% of full throttle. 2. When engine is running at approximately 25% of full throttle, SLOWLY engage belt by using the belt engagement . DO NOT engage the belt with engine running at high RPM. Engaging belt while engine is running at high RPM WILL result in significant belt squealing and possible damage. Engaging belt while engine is running at high RPM may also damage vital drive components of the chipper or chipper/shredder, 3. If the chipper engine stalls while engaging the belt, return the belt engagement back to the START position, restart engine, SLIGHTLY increase throttle and attempt engagement again. 4. Once the belt is engaged, SLOWLY increase throttle to 100% or full throttle. 5. ALWAYS run the machine at 100% or full throttle when chipping or shredding material. ENGINE SHUTDOWN/BELT DISENGAGEMENT: 1. WITH THE BELT STILL ENGAGED, SLOWLY move the throttle to the SLOW position. 2. Allow the engine to run at slow idle for 30-60 seconds. This will slow the rotor down to the same RPM as the engine. 3. Stop the engine by moving the throttle to the STOP position or turning off the ignition switch. 4. Allow rotor to come to a complete stop. 5. Once the engine is off and the rotor has completely stopped, the belt can be disengaged by moving the belt engagement back to the START position. NEVER disengage the belt as part of the stopping or shut down process. The belt should remain engaged during the entire shutdown process. Leaving the belt engaged is a vital part of proper shutdown and ensures the rotor stops spinning in conjunction with the engine shutting off. 888.625.4520 9 PRODUCT NOISE LEVELS Model Description dB (Pressure) dB (Power Level) CHIPPER/SHREDDERS SC2170 2" (5cm) Capacity – Subaru SP 170cc 97 111 SC3206 3" (7.6cm) Capacity – Briggs & Stratton OHV 205cc 97 111 SC3265 3" (7.6cm) Capacity – Subaru EX 265cc 97 111 SC3306 3" (7.6cm) Capacity – Briggs & Stratton OHV 306cc 98 112 SC3306E 3" (7.6cm) Capacity – Briggs & Stratton OHV 306cc, Electric Start 98 112 SC3342 3" (7.6cm) Capacity – Briggs & Stratton OHV 342cc 94 114 SC3420 3" (7.6cm) Capacity – Briggs & Stratton OHV 420cc 98 112 97 120 CHIPPER/SHREDDER/BLOWER SC5720B 5" (13cm) Capacity Chipper/Shredder/Blower Subaru 720cc LS22 Subaru SP 170cc N/A N/A LS27 Subaru SP 210cc N/A N/A WT189 Subaru EA190V, 189cc 87 101 WT190 Briggs & Stratton Quantum 190cc 87 101 WT190T Briggs & Stratton Quantum 190cc 87 101 WT190S Briggs & Stratton Quantum 190cc 87 101 SG340 Honda GXV 340cc 73 87 LOG SPLITTERS WHEELED TRIMMERS STUMPGRINDER CHIPPERS CH4400 4" (10cm) Capacity – Subaru EX 404cc 93 107 CH5653 5" (13cm) Capacity – Subaru EH 653cc 92 109 CH611DH 6" (15cm) Capacity – Kubota Diesel 1.1 Liter with Hydraulic Feed 94 111 CH6720H 6" (15cm) Capacity – Subaru 720cc with Hydraulic feed 94 117 CH8720iH 8" (20cm) Capacity – Subaru 720cc – Turntable with Hydraulic Feed 96 114 CH8993H 8" (20cm) Capacity – Briggs & Stratton Vanguard 993cc – Turntable with Hydraulic Feed 94 114 CH911DH 9" (23cm) Capacity – Kubota 1.1 Liter Diesel with Hydraulic Feed 95 112 CH922DH 9" (23cm) Capacity – Kubota 2.2 Liter with Hydraulic Feed 95 112 PTO CHIPPERS AND CHIPPER/SHREDDERS CH45540 4.5" (11cm) Capacity – 540 PTO – 15-28 hp Input Range 87* 107 CH5540 5" (13cm) Capacity – 540 PTO – 25-45 hp Input Range 86* 103 CH5540H 5" (13cm) Capacity – 540 PTO with Hydraulic Feed – 25-45 hp 86* 103 SC5540 5" (13cm) Capacity – 540 PTO – Chipper/Shredder – 25-45 hp Input Range 99* 113 SC5540B 5" (13cm) Capacity – 540 PTO – Chipper/Shredder – PTO - 25-45 hp 99* 113 CH8540 8" (20cm) Capacity – 540 PTO – 35-60 hp Input Range 95* 112 CH9540H 9" (23cm) Capacity – 540 PTO with Hydraulic Feed - 35-60 hp 95* 112 CHF9540H 9" (23cm) Capacity – 540 PTO with Hydraulic Feed - 35-60 hp 95* 112 WV160 Honda OHC 160cc 84 98 WV160S Honda OHC 160cc – Self-Propelled 84 98 WV190 Briggs & Stratton OHV 190cc 84 98 WV190S Briggs & Stratton OHV 190cc – Self-Propelled 84 98 DL8 Subaru EX 404cc – 8" (20.3cm) Intake 116 134 DL10 Briggs & Stratton Vanguard (Elec. Start) 570cc – 10" (25.4cm) Intake 120 138 DL12653 Subaru EH 653cc – 12" (30.5cm) Intake 97 120 DL12720 Subaru EH 720cc – 12" (30.5cm) Intake 99 122 WHEELED VACUUMS DEBRIS LOADERS *based off towable model 10 These values were obtained using harmonized EN ISO 3744:2010 www.bearcatproducts.com CHIPPERS CHIPPER COMMONALITIES 14" (35.6cm) rotor weighing 49 lbs. (22.2kg) fully assembled • • • • • • • 1" (2.5cm) thick machine balanced cantilever rotor Models: CH4400, CH45540 & CH450H Standard 4.5" x 9" (11.4cm x 22.9cm) discharge chute. Optional discharge chute is 4.5" (11.4cm) square 13" x 14.5" (33cm x 36.8cm) feed chute Two reversible heat-treated steel chipper blades Four-sided cutter bar/anvil Chipper Blade Kit: P/N: 76295-00 20" (50.8cm) rotor weighing 140 lbs. (63.5kg) fully assembled • • • • • • • • 1.25" (3.2cm) thick machine balanced 4" (10cm) and 5" (13cm) chippers, Models CH5540, CH500H, CH5540H & CH5653 – same chipper body 6" (15cm) discharge chute rotating 360 degrees 5.5" x 7" (14cm x 17.8cm) feed opening Reversible heat-treated steel chipper blades. Four-sided adjustable steel anvil/cutter bar Double-banded belt drive, except model CH500H is hydraulic driven – no belts Chipper Blade Kit: P/N: 72493 26" (66cm) rotor weighing 165 lbs. (74.8kg) fully assembled • • • • • • • • • • • 1" (2.5cm) thick machine balanced cantilever rotor Chipper Models: CH6720H & CH611DH 6.7" (17cm) square discharge chute 6.5" x 13.5" (16.5cm x 34.3cm) feed chute for easy feeding of limbs Four reversible heat-treated steel chipper blades Four-sided anvil/cutter bar mounted on the side of the feed chute Triple-banded belt New style local sensing two-stage pump with live hydraulics SmartFeed Sensor Hand-operated belt engagement lever Chipper Blade Kit: P/N: 76293-00 30" (76.2cm) rotor weighing 275 lbs. (124.7kg) fully assembled • • • • • • • • 1.25" (3.2cm) thick machine balanced 9" (23cm) machine – Model CHF9540H 6" (15cm) diameter square discharge. Discharges toward the ground from a height of 34" (86cm) 9" x 9" (23cm x 23cm) feed throat opening 16 reversible heat-treated steel chipper blades Four-sided adjustable steel anvil/cutter bar Triple-banded belt drive Chipper Blade Kit: P/N: 74830-00 30" (76.2cm) rotor weighing 275 lbs. (124.7kg) fully assembled • • • • • • • • • 1.25" (3.2cm) thick machine balanced 8" (20.3cm) and 9" (23cm) machines Models CH800H, CH8720iH, CH8993H, CH8540, CH9540H, CH911DH & CH922DH – same chipper body 8" (20.3cm) discharge chute rotating 360 degrees 9" x 9" (23cm x 23cm) feed throat opening Four reversible heat-treated steel chipper blades Four-sided adjustable steel anvil/cutter bar Triple-banded belt drive, except model CH800H is hydraulic driven – no belts Chipper Blade Kit: P/N: 76293-00 888.625.4520 11 CHIPPER/SHREDDERS 2" (4cm) CAPACITY CHIPPER/SHREDDER Model: SC2170 ENGINE EASY TO TRANSPORT • Max torque: 8.3 ft-lbs at 2,500 rpm, runs at 3,800 rpm • Weight of machine is distributed evenly throughout FUEL CAPACITY DISCHARGE SCREEN DIRECT DRIVE MACHINE DIMENSIONS AND WEIGHT FEED CHUTES • 120 lbs. (54.4kg) • Subaru SP 170cc • .9 gal. (3.4 liters) • Shredder hopper is 16" x 20" (40.6cm x 50.8cm) • Maximum shredder capacity of up to .75" (2cm) • Maximum chipper feed size of up to 2" (5cm) • Easy grip wide handle • Comes standard with 1.13" screen (2.9cm) • LxWxH – 29" x 23" x 50" (74cm x 58cm x 127cm) SAFETY • Meets ISO safety decal standards CHIPPING BLADES & SHREDDING KNIVES PARTS & ACCESSORIES • Blade Dimensions: 3.125" x 2" x .25" (8cm x 5cm x .6cm) • Fine Screen .75" (2cm) (P/N: 76893-35) • Four reversible Shredder Knives (standard) • Wet Debris Screen (P/N: 77639-35) • Four additional Shredder Knives optional • Shredder Knives Kit (P/N: 77616-00) • Two reversible heat-treated steel chipper blades CHIPPER/SHREDDER ROTOR ASSEMBLY • Rotor weight is 15 lbs. (6.8kg) • Rotor turns at 3,800 rpm • Standard Screen 1.13" (2.8cm) (P/N: 76758-35) • Additional Shredder Knives Kit (P/N: 77618-00) • Chipper Blade Kit (P/N: 70738) • Hour/Tach Kit (P/N: 31605-00) • 12.8" diameter (32.6cm) SC2170 Debris Screens .75" Fine 12 1.13" Standard Wet Debris www.bearcatproducts.com CHIPPER/SHREDDERS 3" (7.6cm) CAPACITY CHIPPER/SHREDDERS 1 of 2 Models: SC3206, SC3265, SC3306, SC3306E, SC3342 & SC3420 ENGINES CHIPPER/SHREDDER ROTOR ASSEMBLY SC3206 • Briggs & Stratton OHV 206cc • Max torque: 9 ft-lbs. at 2,700 rpm, runs at 3,600 rpm SC3206 • Weighs 21 lbs. (9.5kg) SC3306 • Briggs & Stratton OHV 306cc • 1" (2.5cm) diameter rotor shaft • Max torque: 14.5 ft-lbs. at 2,800 rpm, runs at 3,600 rpm SC3306E • Briggs & Stratton OHV 306cc – Electric Start • Max torque: 14.5 ft-lbs. at 2,800 rpm, runs at 3,600 rpm SC3265 • Subaru EX 265cc • Max torque: 13.7 ft-lbs. at 2,500 rpm, runs at 3,800 rpm • Rotates at 3,600 rpm • 12" diameter (30.4cm) SC3265, SC3306, SC3306E, SC3342, SC3420 • Weighs 27 lbs. (12.3kg) • Rotates at 3,600 rpm • 1" (2.5cm) diameter rotor shaft • 12" diameter (30.4cm) CHIPPER BLADES & SHREDDER KNIVES • Two reversible heat-treated chipper steel blades SC3342 • Briggs & Stratton OHV 342cc • Blade Dimensions: LxWxH: 3.125" x 2"x .25" (7.6cm x 5cm x 6cm) • Max torque: 16.5 ft-lbs. at 2,800 rpm, runs at 3,600 rpm • Eight Reversible Shredder Knives – SC3206 SC3420 • Briggs & Stratton OHV 420cc • Twelve Reversible Shredder Knives SC3265, SC3306, SC3306E, SC3342, SC3420 • Max torque: 16.5ft-lbs. at 2,600 rpm, runs at 3,600 rpm BEARINGS FUEL CAPACITY • Two 1" (2.5cm) greasable bearings with three bolt cast flanges • SC3265 - 1.6 gal (6.1 liters) BELT DRIVE • SC3206 - .8 gal (3 liters) • SC3342 - 1 gal. (3.8 liters) • SC3306 & SC3306E - .8 gal. (3 liters) • SC3420 - .8 gal (3 liters) • With manual belt engagement • SC3206, SC3306, SC3306E – single belt driven • SC3265, SC3342, SC3420 - d ual belt driven • Spring-loaded belt tensioner FEED CHUTES • Shredder hopper is 12" x 25" (30.5cm x 63.5cm) • Maximum shredder capacity of up to .75" (2cm) • Maximum chipper feed size of up to 3" (7.6cm) SIDE DISCHARGE • You don’t have to move the equipment as often with a side discharge as you do with a bottom discharge • Heavy-duty 7 gauge steel screens available in four different sizes to fit your needs CONVENIENT TRANSPORTATION • Handle placement for the best control over various terrain, or tip it back and use the hopper handle for transporting on a smooth surface • Pneumatic tires feature grease zerks, enabling easy greasing of the hub 888.625.4520 13 CHIPPER/SHREDDERS 3" (7.6cm) CAPACITY CHIPPER/SHREDDERS 2 of 2 Models: SC3206, SC3265, SC3306, SC3306E, SC3342 & SC3420 HEAVY-DUTY CONSTRUCTION • Extra strength and reinforcements in areas that matter most • 14 gauge (1.9mm) steel construction • Built to last with welded construction instead of bolt together. MACHINE DIMENSIONS • LxWxH – 40" x 25" x 46" (101cm x 64cm x 117cm) PARTS & ACCESSORIES SC3206 • Screen - Fine .375" (.95cm) (P/N: 77382-12) • Screen - Medium .75" (2cm) (P/N: 77383-12) • Screen - Coarse Standard 1.375" (3.5cm) (P/N: 77384-12) • Screen - Wet Debris (P/N: 77385-12) • Shredder Knives Kit – SC3206 (P/N: 77589-00) WEIGHTS SC3265, SC3306, SC3306E, SC3342, SC3420 • SC3206 - 195 lbs. (88.5kg) • Screen - Fine .375" (.95cm) (P/N: 77386-12) • SC3265 - 250 lbs. (113.4kg) • Screen - Medium .75" (2cm) (P/N: 77387-12) • SC3306 - 233 lbs. (105.7kg) • Screen - Coarse Standard 1.375" (3.5cm) (P/N: 77388-12) • SC3306E - 241 lbs. (109.3kg) • SC3342 - 263 lbs. (119.3kg) • SC3420 - 284 lbs. (128.8kg) PARTS & ACCESSORIES FOR ALL MODELS • Two-Wheel Tow Kit (P/N: 77000-00) • Leaf Tamper (P/N: 70089) • Debris Bag with Handles (P/N: 17854) • All Weather Cover (P/N: 70093) • Screen - Wet Debris (P/N: 77389-12) • 1-speed Blower Attachment (P/N: 70251) • Shredder Knives Kit (P/N: 70973) • Road Towable Chipper/Shredder Trailer (P/N: 77353-00) • Supplemental Adapter Kit for wide body models Serial C03477 & below (P/N: 77700-00) • Supplemental Adapter Kit for model SC3206 Serial C03477 and below (P/N: 77701-00) • Chipper Blade Kit (P/N: 70738) • Tach/Hour Meter (P/N: 31605-00) 3" Debris Screens • Attachable Debris Bag (P/N: 70355-00) .375" .75" 1.375" Standard Wet Debris A 1.375" debris screen is standard with three others available depending on desired mulch size/type. Shown with optional Debris Bag Kit - 70355-00 14 www.bearcatproducts.com CHIPPER/SHREDDER/BLOWER 5" (13cm) CAPACITY CHIPPER/SHREDDER/BLOWER Models: SC5720B ENGINE • Subaru EH 720cc DOUBLE-BANDED BELT DRIVE • Manual belt engagement • Max torque: 39.5 ft-lbs. at 2,500 rpm, runs at 3,600 rpm • Spring-loaded belt tensioner FUEL CAPACITY FEED CHUTES • 9 gal. (34.1 liters) • Shredder hopper is 13" x 18" (33cm x 48.7cm) CHIPPER/SHREDDER ROTOR ASSEMBLY • Maximum chipper feed size of up to 5" (12.7cm) • Machine balanced INTEGRATED DISCHARGE • Maximum shredder capacity of up to .75" (2cm) • Weighs 121 lbs. (54.9kg) • 1.5" (3.8cm)-diameter rotor shaft • With a 360° rotatable, 6" (15.25cm) diameter steel tubing with adjustable spout cap allows you to put the chips where you want them the first time • 20.6" (52.3cm) diameter • Discharge height is 92" (234cm) • Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy service UNIQUE SCREENLESS SHREDDER • Rotates at 2,000 rpm CHIPPER BLADES & SHREDDER KNIVES • Unique product, self-feed chipper/shredder without a screen. This greatly reduces the chance of plugging, especially with damp material • Four reversible heat-treated chipper steel blades • Blade Dimensions: 3.125" x 2" x .25" (7.6cm x 5cm x 6cm) • 36 Shredder Knives BEARINGS • Two 1.5" (3.8cm) greasable bearings with two bolt cast flanges HEAVY-DUTY CONSTRUCTION • 7 gauge steel HIGHWAY TOWABLE • 50" (127cm) tread width (center to center) and 5.3-12 tires with 1,000 lb. (454kg) torsion axle suspension enables the chipper to be easily towed down the highway MACHINE WEIGHT (DRY) • 930 lbs. (422kg) with fluids at capacity HITCH • 2" (5cm) ball coupler is standard MACHINE DIMENSIONS • LxWxH – 92" x 52" x 92" (233cm x 131cm x 233cm) SAFETY • Meets ISO safety decal standards • Safety chains • 12 volt tail lights standard • Meets NATM Certification PARTS & ACCESSORIES • Chipper Blade Kit (P/N: 72493) • Shredder Knives Kit (P/N: 77613-00) 888.625.4520 15 CHIPPERS 4" (10cm) CAPACITY CHIPPER Model: CH4400 ENGINE HEAVY-DUTY CONSTRUCTION • Max torque: 20 ft-lbs. achieved at 2,400 rpm operates at 3,800 rpm • Trailer is made of 7 gauge steel • Subaru EX 404cc FUEL CAPACITY • 7 gauge steel throughout housing with welded construction • Tongue is 2" x 2" (5cm x 5 cm) with 11 gauge wall thickness • 1.85 gal. (7 liters) 14" (35.6cm) DIAMETER CANTILEVER ROTOR • 14" (35.6cm) diameter by 1" (2.5cm) thick rotor • Weighs 49 lbs. (22.2kg) • Machine balanced • Rotates at 3,000 rpm HIGHWAY TOWABLE • 43" (109cm) tread width (center to center) and 4.80-8 tires with 1,000 lb. (454kg) torsion axle suspension enables the chipper to be easily towed down the highway • 12 volt safety and directional lighting and tow chains are standard • 1.25" (3.2cm) diameter rotor shaft TWO CHIPPING BLADES MACHINE WEIGHT (DRY) • 536 lbs. (243kg) • Two reversible heat-treated steel chipper blades • Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm) HITCH BEARINGS MACHINE DIMENSIONS • Two 1.25" (3.2cm) greasable bearings with two bolt cast flanges BELT DRIVE • 2" (5cm) ball coupler is standard • LxWxH – 75" x 51" x 45" (190cm x 129cm x 114cm) SAFETY • Meets ISO safety decal standards • Double-banded belt drive with manual belt engagement • Safety chains • Spring-loaded belt tensioner • 12 volt tail lights standard ANVIL/CUTTER BAR • Four-sided adjustable to insure good chipping ability • 5" long x 1.75" wide x .375" thick (12.7cm x 4.4cm x .95cm) FEED CHUTE • Opening 13" x 15" (33cm x 38cm), 38" (96.5cm) off the ground • Meets NATM Certification PARTS & ACCESSORIES • Blade Kit (P/N: 76295-00) • Optional Discharge Chute 4.5" x 4.5" (11.4cm x 11.4cm) (P/N: 74634-00) • Tach/Hour Meter Kit - Gas (P/N: 31605-00) • Feed throat opening is 5" x 5" (12.7cm x 12.7cm) • Maximum feed size of up to 4" (10cm) INTEGRATED DISCHARGE • Standard Discharge 4.5" x 9" (11.4cm x 22.9cm) and discharges towards the ground, from a height of 14" (36cm) • Optional Discharge 4.5" x 4.5" (11.4cm x 11.4cm) square discharge with adjustable deflector, discharges at a height of 55" (140cm) 16 www.bearcatproducts.com CHIPPERS 5" (13cm) CAPACITY CHIPPER Model: CH5653 ENGINE • Subaru EH engine 653cc • Max torque: 33.6 ft-lbs. at 2,500 rpm, runs at 3,800 rpm HEAVY-DUTY CONSTRUCTION • .25" (6.35cm) steel housing with welded construction • Trailer is made of 7 gauge steel FUEL CAPACITY • 9 gal. (34.1 liters) • Tongue is 2" x 2" (5cm x 5 cm) with .25" (6.35mm) wall thickness 20" (51cm) DIAMETER ROTOR HIGHWAY TOWABLE • 20" (51cm) diameter by 1.25" (3.2cm) thick rotor • Weighs 140 lbs. (63.5kg) • Machine balanced • Rotates at 2,000 rpm • 44" (112cm) tread width (center to center) and 5.30-12 tires with 1,000 lb. (454kg) torsion axle suspension enables the chipper to be easily towed down the highway • 12 volt safety and directional lighting and tow chains are standard • 1.5" (3.8cm) diameter rotor shaft • Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy service FOUR CHIPPING BLADES MACHINE WEIGHT (DRY) • 950 lbs. (431kg) HITCH • 2" (5cm) ball coupler is standard • Four reversible heat-treated steel chipper blades • Blade Dimensions: 3.1" x 2" x .25" (7.9cm x 5cm x .6cm) MACHINE DIMENSIONS • LxWxH – 80" x 57" x 95" (203cm x 145cm x 241cm) BEARINGS • Two 1.5" (3.8cm) greasable bearings with two bolt cast flanges BELT DRIVE • Double-banded belt drive with manual belt engagement • Spring-loaded belt tensioner ANVIL/CUTTER BAR • Four-sided adjustable • 5.6" long x 4" wide x .375" thick (14.2cm x 10.2cm x .95cm) SAFETY • Meets ISO safety decal standards • Safety chains • 12 volt tail lights standard • Meets NATM Certification PARTS & ACCESSORIES • Blade Kit (P/N: 72493) • Tach/Hour Meter Kit - Gas (P/N: 31605-00) FEED CHUTE • Opening 27" x 28" (68.6cm x 71.1cm) 43.8" (111cm) off the ground • Feed throat opening is 5.5" x 7" (14cm x 17.8cm) • Maximum feed size of up to 5" (12.7cm) INTEGRATED DISCHARGE • With a 360° rotatable, 6" (15.2cm) diameter steel tubing with adjustable spout cap allows you to put the chips where you want them the first time • Discharge height is 95" (2.4m) 888.625.4520 17 CHIPPERS 6" (15cm) CAPACITY CANTILEVER CHIPPERS - 1 of 2 Models: CH611DH & CH6720H ENGINES CH611DH • Kubota 1.1 Liter Diesel, 69 cu in. (1.1 liter) • Max torque: 54.2 ft-lbs. achieved at 2,200 rpm • Operates at 3,220 rpm CH6720H • Subaru EH 720cc • Max torque: 39.5 ft-lbs. (53.6 N-m) achieved at 2,500 rpm • Operates at 3,600 rpm at full throttle FUEL CAPACITY/CONSUMPTION • 9 gal. (34.1 liters) • Fuel consumption on the Subaru 720cc is estimated at 1.8 gal. (6.8 liters) per hour at full load • Fuel consumption on the Kubota 1.1 L is estimated at 1.7 gal. (6.44 liters) per hour at full load 26" (66cm) DIAMETER ROTOR • 26" (66cm) diameter by 1" (2.5cm) thick rotor • Weighs 165 lbs. (75kg) HYDRAULIC FEED SYSTEM • Steel hydraulic reservoir, 4 gal. (15 liters) capacity on CH611DH and a Nylon hydraulic reservoir, 3 gal. (11.5 liters) capacity on the CH6720H • Self-contained hydraulic feed system allows you to evenly feed limbs into the chipper • Variable feed rate on the CH611DH (available as an accessory on the CH6720H) with load sensing 2-stage pump • Feed rate 0-150 fpm (0-46 m/min) Average 100 fpm (30 m/min) • Self-contained system with infinite speed settings, dedicated neutral and full reverse, pump output 6.6 GPM (25 LPM) and 4hp with maximum pressure and maximum flow, however this is rarely required • Feed system operates under 2,500 psi • Single 15" (38cm) diameter top feed roller • 2-stage pump DIGITAL DISPLAY CONTROLLER (DDC) • Smart feed with automatic “try again” feature • Machine balanced • Maximizes chipping efficiency • Rotates at 1,780 rpm (CH611DH) • Minimizes fuel consumption • Rotates at 1,650 rpm (CH6720H) • 1.75" (4.45cm) diameter rotor shaft • Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy service FEED CHUTE • Opening 33" x 37" (84cm x 94cm) tray 30" (76.2cm) off the ground • Feed throat opening is 6.5" x 13" (16.5cm x 33cm) • 90° feed angle FOUR CHIPPING BLADES • Maximum feed size of up to 6" (15.2cm) • Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm) INTEGRATED DISCHARGE • Four reversible heat-treated steel chipper blades BEARINGS CH6720H • With a 360° rotatable, 6" (15.2cm) diameter steel tubing with adjustable spout cap • Two 1.75" (4.5cm) greasable bearings with four bolt cast flanges • Discharge height is 104" (2.6m) BELT DRIVE • With a 360° rotatable, 6.7" (17cm) square steel chute with screw-type adjustable spout cap • Triple-banded belt drive with manual belt engagement • Spring-loaded belt tensioner CH611DH • Discharge height is 93" (2.4m) ANVIL/CUTTER BAR • Four-sided adjustable anvil to insure good chipping ability • 6" long x 4" wide x .625" thick (16.5cm x 10.2cm x 1.6cm) 18 www.bearcatproducts.com CHIPPERS 6" (15cm) CAPACITY CANTILEVER CHIPPERS - 2 of 2 Models: CH611DH & CH6720H HEAVY-DUTY CONSTRUCTION ADJUSTABLE TONGUE JACK • Feed table is 10 gauge steel on the CH6720H and 7 gauge steel on the CH611DH • Adjustable jack allows one person to easily maneuver the chipper around and hook up to a vehicle • Tongue is 3" x 3" (7.6cm x 7.6 cm) with 11 gauge wall thickness MACHINE DIMENSIONS • .25" (6.35cm) housing with welded construction • Roller wheel with 850 lbs. (385kg) rating CH611DH • LxWxH – 143" x 59" x 93" (363cm x 150cm x 236cm) HIGHWAY TOWABLE CH6720H • 50" (127cm) tread width (center to center) and P205-75R14 tires with 1,800 lb (816kg) torsion axle suspension CH611DH • 50" (127cm) tread width (center to center) and P215-75R15 tires with 2,500 lb. (1030kg) torsion axle suspension CH6720H • LxWxH – 126" x 57" x 104" (320cm x 145cm x 264cm) SAFETY • Meets ISO safety decal standards • Safety chains • 12 volt tail lights standard • Meets NATM Certification MACHINE WEIGHT (DRY) • CH611DH – 2,130 lbs. (966.2kg) • CH6720H – 1,595 lbs. (723.5.15kg) PARTS & ACCESSORIES • Blade Kit (P/N: 76293-00) • 2 5/16" Coupler (P/N: 14519-00) HITCH • 2" (5cm) ball coupler is standard • Height adjustable coupler has 3 positions in 2" (5cm) • CH611DH has a telescoping tongue length may be adjusted up to 18" (45cm) • Pintle Hitch (P/N: 14900-00) • Spare Tire Kit (CH611DH)(P/N: 75291-00) • Tach/Hour Meter Kit - Gas (P/N: 31605-00) • Knee Bar (P/N: 76945-00) • Adjustable Feed Speed Sensor Kit (P/N: 76820-00) • Optional Engine Guard Plate (P/N: 70135-00) CH611DH CH6720H 888.625.4520 19 CHIPPERS 8" (20cm) CAPACITY TURNTABLE CHIPPERS - 1 of 2 Models: CH8720iH & CH8993H ENGINES CH8720iH • EFI Subaru EH 720cc, Fuel injected • Max torque: 38.5 ft-lbs at 2,800 rpm • Operates at 3,600 rpm CH8993H • Briggs & Stratton Vanguard 993cc • Max torque: 52.4 ft-lbs at 2,350 rpm • Operates at 3,750 rpm FUEL CAPACITY/CONSUMPTION • 9 gal (34.1 liters) • Fuel consumption on the Briggs & Stratton 993cc is estimated at 3 gal. (11.3 liters) per hour at full load • Fuel consumption on the EFI Subaru EH 720cc is estimated at 1.5 gal (5.7 liters) per hour at full load 30" (76cm) DIAMETER ROTOR • 30" (76cm) diameter by 1.25" (3.2cm) thick rotor • Weighs 275 lbs. (125kg) • Machine balanced • Rotates at 1,500 rpm • 1.75" (4.45cm) diameter rotor shaft • Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy service BELT DRIVE • Triple-banded belt drive with manual belt engagement • Spring-loaded belt tensioner ANVIL/CUTTER BAR • Four-sided adjustable to insure good chipping ability • 9" long x 4" wide x .625" thick (22.9cm x 8.9cm x 1.6cm) HYDRAULIC FEED SYSTEM • Steel hydraulic reservoir, 3 gal. (11.5 liters) capacity • Self-contained hydraulic feed system allows you to evenly feed limbs into the chipper • Variable feed rate with load sensing 2-stage pump • Feed rate 0-150 fpm (0-46 m/min) Average 100 fpm (30 m/min) • Self-contained system with infinite speed settings, dedicated neutral and full reverse, pump output 6.6 GPM (25 LPM) and 4hp with maximum pressure and maximum flow, however this is rarely required • Feed system operates under 2,500 psi • Single 15" (38cm) diameter top feed roller • 2-stage pump DIGITAL DISPLAY CONTROLLER (DDC) • Smart feed with automatic “try again” feature • Maximizes chipping efficiency • Minimizes fuel consumption FOUR CHIPPING BLADES • Four reversible heat-treated steel chipper blades • Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm) BEARINGS • Two 1.75" (4.5cm) greasable bearings with 4 bolt cast flanges 20 www.bearcatproducts.com CHIPPERS 8" (20cm) CAPACITY TURNTABLE CHIPPERS 2 of 2 Models: CH8720iH & CH8993H FEED CHUTE MACHINE DIMENSIONS • Feed throat opening is 9" x 9" (23cm x 23cm) 360° ROTATIONAL BED • Opening 30" x 31" (76cm x 79cm) Tray 27" (68cm) off the ground • LxWxH – 136" x 79" x 95" (345cm x 200cm x 241cm) • 90° Feed Angle • Bed can rotate 360° for ease of feeding from any direction • Maximum feed size of up to 8" (23cm) • Brake for locking bed in place. With drop pin for positive transport lock INTEGRATED DISCHARGE • Keeps work crews out of the street • With a 360° rotatable, 8" (20cm) diameter steel tubing with adjustable spout cap allows you to put the chips where you want them the first time • Meets ISO safety decal standards • Discharge height is 95" (2.41m) • Safety chains HEAVY-DUTY CONSTRUCTION • .375" (.95cm) steel face plate on the rotor housing • .25" (6.35cm) steel on the rest of the housing • Frame is 2.5" x 2.5" (5cm x 5cm) 7 gauge steel tubing SAFETY • 12 volt tail lights standard • Meets NATM Certification PARTS & ACCESSORIES • Blade Kit (P/N: 76293-00) • Feed table is 10 gauge steel • 2 5/16" Coupler (P/N: 14519-00) • Tongue is 3" x 3" (7.6cm x 7.6cm) with .25" (6.35mm) wall thickness • Pintle Hitch (P/N: 14900-00) HIGHWAY TOWABLE • 69" (174cm) tread width (center to center) and P215-75R15 tires with 3,000 lb (1360kg) torsion axle suspension enables the chipper to be easily towed down the highway • Low Profile Discharge Chute Kit (P/N: 74581-00) • Knee Bar Safety Kit (P/N: 76195-00) • Tach/Hour Meter Kit - Gas (P/N: 31605-00) MACHINE WEIGHT (DRY) • CH8720iH – 2,220 lbs. (1,007kg) • CH8993H – 2,265 lbs. (1,027kg) HITCH • 2" (5cm) ball coupler is standard • Height adjustable coupler. Has 3 positions in 2" (5cm) increments TELESCOPING TONGUE • Adjustable length and height. The length may be adjusted up to 18" (45cm) ADJUSTABLE TONGUE JACK • Roller wheel with 850 lb. (385kg) rating • Adjustable jack allows one person to easily maneuver the chipper around and hook up to a vehicle 888.625.4520 21 CHIPPERS 9" (23cm) CAPACITY - 1 of 2 Models: CH911DH & CH922DH ENGINES CH911DH • Kubota 1.1 Liter Diesel, 69 cu in. (1.1 liter) • Max torque: 54.2 ft-lbs. achieved at 2,200 rpm • Operates at 3,220 rpm CH922DH • Kubota 2.2 Liter Diesel 134 cu in. (2.2 liter) • Max torque: 108.4 ft-lbs. achieved at 1,800 rpm BEARINGS • Two 1.75" (4.5cm) greasable bearings with four bolt cast flanges BELT DRIVE • Triple-banded belt drive with manual belt engagement • Spring-loaded belt tensioner ANVIL/CUTTER BAR • Operates at 3,020 rpm • Four-sided adjustable to insure good chipping ability FUEL CAPACITY/CONSUMPTION • 9" long x 4" wide x .625" thick (22.9cm x 10.1cm x 1.6cm) • 18 gal (68 liters) HYDRAULIC FEED SYSTEM • Fuel consumption on the 1.1 Liter Diesel Kubota is estimated at 1.7 gal. (7.57 liters) per hour at full load • Steel hydraulic reservoir, 3 gal. (11.5 liters) capacity • Fuel consumption on the 2.2 Liter Diesel Kubota is estimated at 3 gal. (14.2 liters) per hour at full load 30" (76cm) DIAMETER ROTOR • 30" (76cm) diameter by 1.25" (3.2cm) thick rotor • Self-contained hydraulic feed system allows you to evenly feed limbs into the chipper • Variable feed rate with load sensing 2-stage pump • Feed rate 0-150 fpm (0-46 m/min) Average 100 fpm (30 m/min) • Rotates at 1,600 rpm • Self-contained system with infinite speed settings, dedicated neutral and full reverse, pump output 6.6 GPM (25 LPM) and 4 hp with maximum pressure and maximum flow, however this is rarely required • 1.75" (4.45cm) diameter rotor shaft • Feed system operates under 2,500 psi • Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy service • Single 15" (38cm) diameter top feed roller • Weighs 275 lbs. (125kg) • Machine balanced FOUR CHIPPING BLADES • Four reversible heat-treated steel chipper blades • Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm) 22 • 2-stage pump DIGITAL DISPLAY CONTROLLER (DDC) • Smart feed with automatic “try again” feature • Maximizes chipping efficiency • Minimizes fuel consumption www.bearcatproducts.com CHIPPERS 9" (23cm) CAPACITY - 2 of 2 Models: CH911DH & CH922DH FEED CHUTE ADJUSTABLE TONGUE JACK • Feed throat opening is 9" x 9" (23cm x 23cm) • Adjustable jack allows one person to easily maneuver the chipper around and hook up to a vehicle • Opening 30" x 31" (76cm x 79cm) Tray 27" (68cm) off the ground • 90° Feed Angle • Feed table is 38" (96.5cm) long • Maximum feed size of up to 9" (23cm) INTEGRATED DISCHARGE • Roller wheel with 850 lbs. (385kg) rating MACHINE DIMENSIONS • LxWxH – 119" x 79" x 96" (302cm x 200cm x 244cm) • With a 360° rotatable, 8" (20cm) diameter steel tubing with adjustable spout cap allows you to put the chips where you want them the first time SAFETY • Discharge height is 96" (2.4m) • 12 volt tail lights standard HEAVY-DUTY CONSTRUCTION • Meets ISO safety decal standards • Safety chains • Meets NATM Certification • .375" (.95cm) steel face plate on the rotor housing PARTS & ACCESSORIES • .25" (6.35mm) steel on the rest of the housing • Electric Brake Kit (P/N: 72730) • 4" (10cm) "C" Channel frame construction HIGHWAY TOWABLE • 69" (175cm) tread width (center to center) and P215-75R15 tires with 3000 lb (1360kg) torsion axle suspension enables the chipper to be easily towed down the highway • Blade Kit (P/N: 76293-00) • Pintle Hitch (P/N: 14900-00) • 2 5/16" (5.9cm) Coupler (P/N: 14519-00) • Low Profile Discharge Chute Kit (P/N: 74581-00) • Fine Chip Rotor Kit (P/N: 76775-00) • Knee Bar Safety Kit (P/N: 76195-00) • Hour Meter Kit - Diesel (P/N: 71921) MACHINE WEIGHT (DRY) • CH911DH – 2,470 lbs. (1,120.4kg) • CH922DH – 2,725 lbs. (1,236kg) TELESCOPING TONGUE • Pintle hitch is standard with 2" (5cm) ball coupler available as an accessory • Adjustable length and height. The length may be adjusted up to 18" (45cm) with four pin settings on the pintle hitch 888.625.4520 23 PTO MACHINES 5" (13cm) CAPACITY CHIPPER/SHREDDER Model: SC5540 PTO DRIVE • One-Speed Blower Kit (4-blade fan and 4" dia. discharge tube) (P/N: 70487) • Recommend 25-45 hp (19-34kW) at the PTO • Two-Speed Blower Kit (8-blade fan and 6" dia. discharge tube) (P/N: 71110) CHIPPER/SHREDDER ROTOR ASSEMBLY • Weighs 112 lbs. (22.2kg) • V acuum Hose Kit (8" dia. x 20') (P/N: 71125) (requires P/N: 71110) • Machine balanced • Screen, Fine – .375" (.95cm) (P/N: 70703) • Rotates at 2,000 rpm • Screen, Medium – .75" (2cm) (P/N: 70531) • 1.5" (3.8cm) diameter rotor shaft • Screen, Standard – 1.5" (3.8cm) (P/N: 70332) • 19" diameter • Screen, Wet Debris (P/N: 70559) • 540 rpm input CHIPPER BLADES & SHREDDING KNIVES • Four reversible heat-treated chipper steel blades • Blade Dimensions: 3.125" x 2" x .25" (7.9cm x 5cm x .64cm) • 36 Reversible Shredding Knives BEARINGS • Two 1.5" (3.8cm) greasable bearings with two bolt cast flanges BELT DRIVE • Double-banded belt drive, serial # E01244 to current • Two single belts, serial # E01243 and earlier FEED CHUTES • Shredder hopper is 20" x 30" (50.8cm x 76.2cm) • Maximum shredder capacity up to .75" (2cm) • Maximum chipper feed size of up to 5" (12.7cm) HEAVY-DUTY CONSTRUCTION • 7 gauge steel chipper/shredder housing • .75" (1.9cm) steel flywheel • Discharge screen is .25" (6.35mm) steel MACHINE DIMENSIONS • LxWxH – 44" x 43" x 48" (111cm x 109cm x 122cm) • Weight: 450 lbs. (204.1 kg) SAFETY • Meets ISO safety decal standards PARTS & ACCESSORIES • Chipper Blade Kit (P/N: 72493) • Shredder Knives Kit (P/N: 70972) 24 www.bearcatproducts.com PTO MACHINES 5" (13cm) CAPACITY CHIPPER/SHREDDER/BLOWER Model: SC5540B POWER SOURCE • 540 rpm input • Recommend 25-45 hp (19-34kW) at the PTO CHIPPER/SHREDDER ROTOR ASSEMBLY • Weighs 145 lbs. (65.8kg) SAFETY • Meets ISO safety decal standards PARTS & ACCESSORIES • Chipper Blade Kit (P/N: 72493) • Shredder Knives Kit (P/N: 70972) • Machine balanced • Rotates at 2,000 rpm • 1.5" (3.8cm) diameter rotor shaft • Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out • 20.6" (52.3cm) diameter CHIPPER BLADES & SHREDDING KNIVES • Four reversible heat-treated chipper steel blades • Blade Dimensions: 3.125" x 2" x .25" (7.9cm x 5cm x .64cm) • 36 Reversible Shredding Knives BEARINGS • Two 1.5" (3.8cm) greasable bearings with two bolt cast flanges BELT DRIVE • Double-banded belt drive FEED CHUTES • Shredder hopper is 13" x 20" (33cm x 51cm) • Maximum shredder capacity of up to .75" (2cm) • Maximum chipper feed size of up to 5" (12.7cm) INTEGRATED DISCHARGE CHIPPER/ SHREDDER/ BLOWER • With a 360° rotatable, 6" (15.25cm) diameter steel tubing with adjustable discharge • Discharge height is 87" (221cm) UNIQUE SCREENLESS SHREDDER • Unique product, self-feed chipper/shredder without a screen HEAVY-DUTY CONSTRUCTION • 7 gauge reinforced steel bed MACHINE DIMENSIONS • LxWxH – 49" x 50" x 87" (124cm x 127cm x 221cm) • Weight: 720 lbs. (326kg) 888.625.4520 25 PTO MACHINES 4.5" (11cm) CAPACITY CANTILEVER CHIPPER Model: CH45540 PTO DRIVE • 540 rpm input FEED CHUTE • Recommend 15-28 hp (11-21kW) at the PTO • Opening 13" x 14.5" (33cm x 36.8cm), 39" (99cm) off the ground 14" (35.6cm) DIAMETER ROTOR • Maximum feed size of up to 4.5" (11.4cm) • Weighs 49 lbs. (22.2kg) INTEGRATED DISCHARGE • Feed throat opening is 4.5" x 5" (11.4cm x 12.7cm) • 14" (35.6cm) diameter by 1" (2.5cm) thick rotor • Machine balanced • Rotates at 2,000 rpm • 1.25" (3.2cm) diameter rotor shaft CHIPPER BLADES • Standard discharge is 4.5" x 4.5" (11.4cm x 11.4cm) and discharges towards the ground, from a height of 14.9" (38cm) • Optional Discharge is 4.5" x 4.5" (11.4cm x 11.4cm) discharges with adjustable deflector at a height of 55" (140cm) • Two reversible heat-treated steel chipper blades • Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm) BEARINGS • Two 1.25" (3.2cm) greasable bearings with two bolt cast flanges BELT DRIVE • Double-banded belt drive • Spring-loaded belt tensioner HEAVY-DUTY CONSTRUCTION • 7 gauge steel throughout housing with welded construction 3-POINT HITCH • Category 1 • Chipper weight is 361 lbs. (164kg) MACHINE DIMENSIONS • LxWxH – 40" x 41" x 44" (102cm x 104cm x 112cm) ANVIL/CUTTER BAR SAFETY • 5.6" long x 4" wide x .375" thick (14.2cm x 10.2cm x .95cm) PARTS & ACCESSORIES • Four-sided adjustable to insure good chipping ability • Meets ISO safety decal standards • Blade Kit (P/N: 76295-00) • Optional Discharge Chute 4.5" x 4.5" (11.4cm x 11.4cm) (P/N: 74634-00) 26 www.bearcatproducts.com PTO MACHINES 5" (13cm) CAPACITY Models: CH5540 & CH5540H PTO DRIVE ANVIL/CUTTER BAR • Recommend 25-45 hp (19-34kW) at the PTO • 5.6" long x 4" wide x .375" thick (14.2cm x 10.2cm x .95cm) • 540 rpm input 20" (51cm) DIAMETER ROTOR • 20" (51cm) diameter by 1.25" (3.2cm) thick rotor • Weighs 140 lbs. (63.5kg) • Machine balanced • Rotates at 1,615 rpm • 1.5" (3.8cm)-diameter rotor shaft • Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out CHIPPER BLADES • Four reversible heat-treated steel chipper blades • Blade Dimensions: 3.1" x 2" x .25" (7.9cm x 5cm x .64cm) BEARINGS • Two 1.5" (3.8cm) greasable bearings with two bolt cast flanges. BELT DRIVE • Double-banded belt drive • Spring-loaded belt tensioner • Four-sided adjustable anvil to insure good chipping ability HYDRAULIC FEED SYSTEM (CH5540H) • Single 15" (38cm) diameter top feed roller • Maximum capacity of 3 gal. (11.36 LPM) at 2,500 psi • Electric/Hydraulic System to control feed roller direction • 2-stage hydraulic pump FEED CHUTE • Opening 28" x 28" (71cm x 71cm) • Feed throat opening is 5.5" x 7.5" (14cm x 19cm) • Maximum feed size of 5" (13cm) INTEGRATED DISCHARGE • With a 360° rotatable, 6" (15.25cm) diameter steel tubing with adjustable spout cap allows you to put the chips where you want them the first time • Discharge height is 90" (230cm) HEAVY-DUTY CONSTRUCTION • .25" (6.35mm) steel throughout housing with welded construction CATEGORY 1 3-POINT HITCH • CH5540 - Weight is 600 lbs. (272kg) • CH5540H - Weight is 980 lbs. (445kg) MACHINE DIMENSIONS • CH5540 – LxWxH 50" x 45" x 90" (127cm x 114cm x 229cm) • CH5540H – LxWxH 68" x 49" x 90" (173cm x 124cm x 229cm) SAFETY • Meets ISO safety decal standards PARTS & ACCESSORIES • Blade Kit (P/N: 72493) • Auto Feed Kit - CH5540H (P/N: 73071) 888.625.4520 27 PTO MACHINES 8" (20cm) CAPACITY Model: CH8540 PTO DRIVE • 540 rpm input BEARINGS • Recommend 35hp to 60hp (26kW-45kW) at the PTO • Two 1.75" (4.5cm) greasable bearings with 4 bolt cast flanges 30" (76cm) DIAMETER ROTOR BELT DRIVE • 30" (76cm) diameter by 1.25" (3.2cm) thick rotor • Weighs 275 lbs. (125kg) • Machine balanced • Rotates at 1,500 rpm • 1.75" (4.5cm)-diameter rotor shaft • Triple-banded belt drive ANVIL/CUTTER BAR • Four-sided adjustable anvil • 9" long x 4" wide x .625" thick (22.9cm x 10.2cm x 1.6cm) • Easily accessible through the hinged cover, when opened, it exposes one half of the rotor for easy access to the chipping blades and makes for easy clean out FEED CHUTE CHIPPER BLADES • Feed throat opening is 9" x 9" (23cm x 23cm) • Four reversible heat-treated steel chipper blades • Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm) • Opening 30" x 31" (76cm x 79cm) 46.5" (118cm) off the ground • Maximum feed size of up to 8" (23cm) INTEGRATED DISCHARGE • With a 360° rotatable, 8" (20cm) diameter steel tubing with adjustable spout cap allows you to put the chips where you want them the first time • Discharge height is 93" (236cm) HEAVY-DUTY CONSTRUCTION • .375" (.95cm) steel face plate on the rotor housing • .25" (6.35mm) steel on the wrap around with welded construction • Frame is 2" x 2" (5cm x 5cm), 7 gauge steel 3-POINT HITCH • Category 1 MACHINE DIMENSIONS • LxWxH – 54" x 47" x 93" (137cm x 119cm x 236cm) • Weight: 886 lbs. (402kg) SAFETY • Meets ISO safety decal standards PARTS & ACCESSORIES • Blade Kit (P/N: 76293-00) • Low Profile Discharge Chute Kit (P/N: 74581-00) 28 www.bearcatproducts.com PTO MACHINES 9" (23cm) CAPACITY 1 of 2 Models: CH9540H & CHF9540H PTO DRIVE • 540 rpm input BEARINGS • Recommend 35hp to 60hp (26kW-45kW) at the PTO • Two 1.75" (4.5cm) greasable bearings with 4 bolt cast flanges 30" (76CM) DIAMETER ROTOR BELT DRIVE • 30" (76cm) diameter by 1.25" (3.2cm) thick rotor • Weighs 275 lbs. (125kg) • Machine balanced • Rotates at 1,500 rpm • 1.75" (4.45cm) diameter rotor shaft • Easily accessible through the hinged cover, when open it exposes one half of the rotor for easy access to the chipping blades and makes for easy service CHIPPER BLADES CH9540H • Four reversible heat-treated steel chipper blades • Blade Dimensions: 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm) CHF9540H • 16 reversible heat-treated steel chipper blades • Blade Dimensions: 3.1" x 2" x .25" (7.9cm x 5cm x .6cm) • Blades are spaced on the rotor to provide maximum coverage and produce an extremely small chip • Triple-banded belt drive ANVIL/CUTTER BAR • Four-sided adjustable anvil • 9" long x 4" wide x .625" thick (22.9cm x 10.2cm x 1.6cm) HYDRAULIC FEED SYSTEM • Steel hydraulic reservoir, 3 gal. (11.5 liter) capacity • Self-contained hydraulic feed system allows you to evenly feed limbs into the chipper • Variable feed rate with load sensing 2-stage pump • Feed rate 0-150 fpm (0-46 m/min) Average 100 fpm (30 m/min) • Self-contained system with infinite speed settings, dedicated neutral and full reverse, pump output 6.6 GPM (25 LPM) and 4Hp with maximum pressure and maximum flow, however this is rarely required • Feed system operates under 2,500 psi • Single 15" (38cm) diameter top feed roller • 2-stage hydraulic pump CH9540H 888.625.4520 29 PTO MACHINES 9" (23cm) CAPACITY 2 of 2 Models: CH9540H & CHF9540H DIGITAL DISPLAY CONTROLLER (DDC) 3-POINT HITCH • Maximizes chipping efficiency and manpower • Chipper weight is 1,300 lbs. (590kg) • Smart feed with automatic “try again” feature to clear jams • Minimizes fuel consumption • Category 1 MACHINE DIMENSIONS FEED CHUTE CH9540H • Opening 30" x 31" (76cm x 79cm) Tray 27" (68cm) off the ground • LxWxH – 70" x 50" x 93" (178cm x 127cm x 236cm) • Feed throat opening is 9" x 9" (23cm x 23cm) CHF9540H • 90° feed angle • LxWxH – 70" x 61" x 63" (178cm x 155cm x 160cm) • Maximum feed size of up to 9" (23cm) SAFETY • Meets ISO safety decal standards INTEGRATED DISCHARGE CH9540H • 360° rotatable, 8" (20cm) diameter steel tubing with adjustable spout cap discharges from a height of 93" (236cm) PARTS & ACCESSORIES • Blade Kit for model CH9540H (P/N: 76293-00) • Blade Kit for model CHF9540H (P/N: 74830-00) CHF9540H • Low Profile Discharge Chute Kit (P/N: 74581-00) • 6" (15cm) diameter square discharge. Discharges toward the ground from a height of 34" (86cm) • Fine Chip Rotor Kit (P/N: 76775-00) HEAVY-DUTY CONSTRUCTION • .375" (.95cm) steel face plate on the rotor housing • .25" (6.35mm) steel on the rest of the housing • Frame is 2" x 2" (5cm x 5cm), 7 gauge steel CHF9540H Fine Chip Rotor 30 www.bearcatproducts.com SKID STEER CHIPPERS 4.5" (13cm) TO 8" (20cm) CAPACITY Models: CH450H, CH500H & CH800H HYDRAULIC FLOW REQUIREMENTS • CH450H (designed for mini track or skid steer loaders) Minimum: 11 gpm - Maximum: 15 gpm (CH450H requires a Bob-Tach mounting adapter for Bobcat models.) • CH500H Minimum: 15 gpm - Maximum: 22 gpm • CH800H Minimum: 25 gpm - Maximum: 38 gpm • CH500H and CH800H have two mount locations Chipper can be mounted with feed chute facing forward or curb side. CHIPPER ROTOR CH450H - Cantilever • • • • • 14" (35.6cm) diameter by 1" (2.5cm) thick rotor Weighs 49 lbs. (22.2kg) Machine balanced Rotates at 2,700 rpm at 11 gpm – 3,700 rpm at 15 gpm 1.25" (3.2cm) diameter rotor shaft ANVIL/CUTTER BAR • Four-sided adjustable anvil to insure good chipping ability HYDRAULIC FEED (CH500H AND CH800H) • Four position manual valve control (Reverse - Neutral - Forward - Reverse) • Infinite speed settings with turn of a handle FEED CHUTES CH450H • 4.5" x 4.5" (11.4cm x 11.4cm) chipper opening for side limbs. Maximum feed size of 4.5" (11.4cm) CH500H • 5.5" x 7" (14cm x 18cm) chipper opening for side limbs. Maximum feed size of 5" (12.7cm) H800H C • 9" x 9" (23cm x 23cm) chipper opening for side limbs. Maximum feed size of 8" (20cm) INTEGRATED DISCHARGE CH500H • The CH450H's standard discharge is 4.5" x 9" (11.4cm x 22.9cm) and discharges towards the ground, from a height of 10.5" (.27m) • • • • • • The CH500H and the CH800H have a 360° rotating, 6" (15cm) (CH500H) or 8" (20cm) (CH800H) diameter steel tubing with adjustable deflector cap thich allows you to put the chips where you want them the first time. These two models also discharge at a height of 93" (2.36m) 20" (51cm) diameter by 1.25" (3.2cm) thick rotor Weighs 140 lbs. (63.5kg) Machine balanced Rotates at 2,700 rpm at 15 gpm – 4,000 rpm at 22 gpm 1.5" (3.8cm) diameter rotor shaft CH800H • 30" (76cm) diameter by 1.25" (3.2cm) thick rotor • Weighs 275 lbs. (125kg) • Machine balanced • Rotates at 1,600 rpm at 25 gpm – 2,500 rpm at 38 gpm • 1.75" (4.45cm) diameter rotor shaft CHIPPING BLADES • Reversible heat-treated chipper steel blades • CH450H has two blades MACHINE DIMENSIONS & WEIGHTS CH450H • 41" x 28" x 40" (104cm x 71cm x 102cm) 286 lbs. (129.7kg) CH500H • 73" x 53" x 93" (185cm x 135cm x 236cm) 1,145 lbs. (520kg) CH800H • 74" x 60" x 88" (188cm x 152cm x 234cm) 1,525 lbs. (693kg) • CH500H and CH800H have four blades • CH450 & CH800H - LxWxH – 5" x 4" x .5" (12.7cm x 10.2cm x 1.3cm) SAFETY • CH500H - LxWxH – 3.125" x 2" x .25" (7.9cm x 5cm x .6cm) BEARINGS • Optional Discharge Chute 4.5" x 4.5" (11.4cm x 11.4cm) (P/N: 74634-00) • CH450H - Two 1.25" (3.2cm) greasable bearings with two bolt cast flanges CH450H • Chipper Blade Kit (P/N 76295-00) • CH500H - Two 1.5" (3.8cm) greasable bearings with two bolt cast flanges CH500H • Chipper Blade Kit (P/N: 72493) • CH800H - Two 1.75" (4.5cm) greasable bearings with four bolt cast flanges CH800H (Serial #804670 & up) • Chipper Blade Kit (P/N: 76293-00) 888.625.4520 • Meets ISO safety decal standards PARTS & ACCESSORIES 31 LOG SPLITTERS Models: LS22 & LS27 ENGINES TRANSPORT • LS27 – Subaru SP 210cc • Weight distributed evenly • LS22 – Subaru SP 170cc FUEL CAPACITY • LS22 – .95 gal. (3.6 liters) • LS27 – .95 gal. (3.6 liters) TONNAGE/FORCE • LS22 – up to 22 tons of splitting force • LS27 – up to 27 tons of splitting force CYLINDER • LS22 – 4" (10cm) diameter • LS27 – 4.5" (11cm) diameter • 4.8-8 (12cm x 20cm) wheels • 2" (5cm) Ball Coupler • Lights and fenders are available as an accessory • Maximum Tow Speed – 45 mph (72 Km/h) SAFETY • Meets ISO safety decal standards PARTS & ACCESSORIES • Log Splitter Valve Seal Kit (P/N: 77622-00) • Log Splitter Cradle Kit (P/N: 77189-00) • Fenders & Tail Light Kit (P/N: 77510-00) • Tach/Hour Meter Kit (P/N: 31605-00) OPERATING POSITIONS • Horizontal and vertical CYCLE TIMES • LS22 – 12 Seconds • LS27 – 14 Seconds HYDRAULICS • LS22 – 4 gal. (15 liters) system with a 2-stage 14 gpm (53 liters) pump • LS27 – 4.5 gal. (17 liters) system with a two-stage 14 gpm pump MAXIMUM LOG LENGTH • 24" (61cm) WELDED STEEL WEDGE • Overall LxWxH – 4.6" x 3.25" x 7.75" (11.7cm x 8.25cm x 19.7cm) MACHINE DIMENSIONS & WEIGHTS • LxWxH – 84" x 39" x 40" (213cm x 99cm x 101cm) • LS22 – 450 lbs. (204kg) • LS27 – 455 lbs. (206.1kg) BEAM • Wide end plate for greater stability in the vertical position • Bed Height - 30" (76cm) from ground 32 www.bearcatproducts.com WHEELED TRIMMERS Models: WT189, WT190, WT190T & WT190S WT189 • Subaru EA190V, 189cc WEIGHTS WT189 - 84 lbs. (38.1kg) WT190 - 77 lbs. (35kg) WT190T - 77 lbs. (35kg) WT190S - 82 lbs. (37.2kg) • Briggs & Stratton Quantum 190cc • • • • FUEL CAPACITY SOUND LEVELS • WT189 - .25 gal. (.95 liter) • WT190's - .25 gal. (.95 liter) • The average dB rating at the operator is 92 dB pressure and 99 dB power level. TRIMMER DISC PLATE DESIGN SELF-PROPELLED WT190's • Made of steel, not aluminum or plastic • Easy line replacement design TRIMMER SHAFT & MOW BALL • • • • .75" (1.9cm) steel trim head shaft Cast iron mow ball Single belt driven cutting head 2.25" collared anti-wrap collar design ADJUSTABLE CUTTING HEIGHT • Trimmer disc can be reversed providing two different cutting heights TRIMMER LINE • .155 mil round line standard • Ten 21" (52cm) pieces of round .155 mil included • .155 & .175 mil CrossFire line available • Model WT190S self-propelled with 3 speed transmission • Speeds for 3-speed transmission are 1 to 3 mph. • No off-set or tilt features on this model. SAFETY • Meets ISO safety decal standards FEATURES • .155 mil line standard with .130 & .175 mil lines available. .75" Steel Trim Head Shaft and 5/8" Solid Steel Axle. Enclosed undercarriage to keep debris from getting in. Three different handle bar height settings for operator convenience. Padded foam gripped handlebar. • “Off Center Trim" moves body over 13° for straight trimming while reaching outside the wheel base. This function allows for trimming along fences, foundations, barrier walls and other long, sensative trim areas. OFF-SET TRIM (WT189 & WT190) • Body of trimmer can be pivoted to the left 13° or 4" (10.2 cm) at the nose, to reach beyond the wheel base. TILT (WT190T) • Three settings, 5°, 10° and 13° • Trim and edge along fences, barriers, foundations, walls and other obstructions Standard Wrapping Method BUILT TO LAST • 12 gauge steel frame & cutting head • Enclosed housing keeps debris out • 5/8" Solid steel axle Optional Wrapping Method 1 Optional Wrapping Method 2 CUTTING SWATH • Cutting swath is 24" (61cm), while machine is only 21" (53cm) from the outer edges of tires WHEELS • WT189 & WT190 - 14" (35.6cm) w/sealed ball bearings • WT190T & WT190S - 15" (38.1cm) w/sealed ball bearings ADJUSTABLE HANDLE BAR • Three settings for ergonomic operation WT189 & WT190, 13 degree off-set trim 888.625.4520 33 WHEELED TRIMMERS Models: WT189, WT190, WT190T & WT190S 14" Sabre Tooth Blade Saplings up to 4" (10cm) in diameter P/N: 74548-00 14" Triple Blade Brush Cutter P/N: 32086-00 .155" diameter - 10 Pack 20" pre-cut length, P/N: 32029-00 .175" diameter - 10 pack 20" pre-cut length, P/N: 32031-00 .175" diameteer - 75' Donut P/N: 32033-00 .175" diameteer - 3lb. Spool P/N: 32035-00 .155" diameter Round 10 Pack 20" pre-cut length, P/N: 32030-00 Nylon Blade Kit P/N: 73060 Cast Iron Mow Ball P/N: 71629-12 Proline Head P/N: 74891-00 .155" Square, 1 lb. donut P/N: 12391 Heat-treated Steel Mow Ball P/N: 72704-12 34 No Spark Mow ball P/N: 73013-00 www.bearcatproducts.com STUMP GRINDER Model: SG340 ENGINE ENGINE KILL SWITCH • Honda GXV 340cc • Safety feature to shut engine off if disengaged for added safety DOUBLE-BANDED BELT DRIVE SYSTEM • Double-banded belt driving the cutter head for more positive power transfer. Belt tension idler • Reduces belt maintenance greatly CARBIDE TIPPED TEETH • 12 carbide tipped teeth offer maximum cutting performance. These teeth are locked into the cutter head (8 curved, 4 straight teeth) • The cutter head turns at 3,600 rpm with a speed at the tips 8,460 ft/min (2578 m/min) • A screen covered opening increases visibility to the cutter head MACHINE DIMENSIONS • LxWxH – 52" x 23" x 44" (132cm x 58cm x 112cm) WEIGHT • 195 lbs. (88kg) SAFETY • Meets ISO safety decal standards PARTS • 12 Blade C utter Replacement Kit (P/N: 76292-00) 7" (17.8cm) DIAMETER CUTTER HEAD • Large cutting diameter giving a smooth cut and can be easily removed for quick and easy sharpening • Cutter head at 15 degree angle • Designed for use on stumps from 6" (15cm) above grade to a maximum of 4" (10cm) below grade DEBRIS FLAP • Mounted to the stump grinder axle 12 Blade Cutter Replacement Kit P/N: 76292-00 LARGE ENCLOSED DRIVE SHAFT • Prevents chips from building up in the belts and pulleys • Large 1.5" (3.8cm) diameter drive shaft provides superior reliability 15.5" (39.37cm) FOAM-FILLED WHEELS • Foam-filled wheels with ball bearing hub SINGLE WHEEL BRAKE • Allows the stump grinder to pivot and keep in position while grinding effortlessly Single Wheel Brake 888.625.4520 35 WHEELED VACUUMS Models: WV160, WV160S, WV190 & WV190S ENGINES CFM • WV190/WV190S – Briggs & Stratton 190cc Professional Series SAFETY • WV160/WV160S – Honda 160cc GCV FAN ROTOR • 5-blade steel fan • .25" (6.35mm) Steel welded rotor construction ONE PIECE HOUSING • 2300 - All Models • Meets ISO safety decal standards PARTS & ACCESSORIES • Hard Bottomed Debris Bag (P/N: 30217-00) • Caster Wheels Kit (P/N: 76967-00) • Made with .20" (5mm) thick Linear Low Density Polyurethane with a UV inhibitor • 4" Diameter Hose Kit (P/N: 73606-00) • Easily removable adapter with bag • Durable Nozzle Wear Plate (P/N: 73640-00) • Discharge opening 6" x 6.5" (15cm x 16.27cm) • Intake width 27" (68.58cm) • Vacuum Wear Liner Kit (P/N: 76466-00) SELF-PROPELLED • Models WV160S and WV190S are self-propelled with three variable speeds • Self-propelled rear wheel drive provides more traction • Ball bearing wheels for a smoother, easier ride HANDLEBARS • Four adjustable height settings • Cushion Grip BAG • Large capacity, hard bottom, quick dump bag, 6-bushel capacity • Dust reducing • Heavy-duty, double stitched nylon zipper with deflector flaps • Adjustable hanger straps ADJUSTABLE FRONT – FIVE HEIGHT SETTINGS • .25" (.64cm) above ground, ground level set at factory • 1.25" (3.2cm) • 2.375" (6cm) • 3.5" (9cm) • 4.5" (14.5cm) MACHINE DIMENSIONS • 61" x 27" x 46" (155cm x 69cm x 117cm) at maximum handle height • WV160 – 108 lbs. (49kg) • WV190 – 113 lbs. (51kg) • WV160S – 121 lbs. (55kg) • WV190S – 126 lbs. (57kg) 36 www.bearcatproducts.com www.bearcatproducts.com DEBRIS LOADERS HITCH MOUNT DEBRIS LOADERS Models: DL8, DL10 ENGINES • DL8 Subaru EX 404cc with recoil start • DL10 Briggs & Stratton Vanguard 570cc with electric start FUEL CAPACITY • DL8 - 1.85 gal. (7 liters) • DL10 - 2.1 gal. (7.9 liters) FAN AND HOUSING • Wear liners made out of high strength steel • 4-blade fan made of .375" (.9cm) steel • Scrolled fan housing for more efficient transfer of air • Direct drive • One bolt access cover removal for easy fan clean out DISCHARGE CHUTE WEIGHTS DL8 • 300 lbs. (136.1kg) DL10 • 340 lbs. (154.2kg) SAFETY • Meets ISO safety decal standards PARTS & ACCESSORIES • Wear Liner Replacement Kit (P/N: 77398-00) • 4' (1.2 m) Flexible Horizontal Chute Extension (P/N: 74737-00) • 16" (40.6cm) Vertical Chute Extension (P/N: 75888-00) • 12 Volt Work Light Kit (P/N: 77105-00) • Discharge Deflector Cap Kit (P/N: 77450-00) • Receiver Bar Mount Kit (P/N: 77464-00) • 360° Rotational 8" (20.3cm) discharge chute BUILT TO LAST • Heavy-duty hose swivel boom • Light-weight aluminum handle • 8" (20.3cm) diameter 12' (3.6m) long flex hose (model DL8390) • 10" (25.4cm) diameter 12' (3.6m) long flex hose (model DL10570) CFM • DL8 – 3500 • DL10 – 3900 MACHINE DIMENSIONS DL8 • LxWxH – 27" x 29" x 57" (69cm x 74cm x 145cm) DL10 • LxWxH – 27" x 30" x 57" (69cm x 76cm x 145cm) DL8 shown 888.625.4520 37 DEBRIS LOADERS SKID MOUNT DEBRIS LOADERS Model: DL12653, DL12720 ENGINES DL12653 • Subaru EH 653cc with electric start DL12720 • Subaru EH 720cc with electric start FUEL CAPACITY • 9 gal. (34.1 liters) polyethylene tank SAFETY • Meets ISO safety decal standards PARTS & ACCESSORIES • Flexible Hose 12" x 12' (30.5cm x 3.7m) (P/N: 12778) • Wear Liner Replacement Kit (P/N: 77073-00) • 16" (40.6 cm) Vertical Chute Extension (P/N: 75888-00) FAN AND HOUSING • 4' (1.2 m) Flexible Horizontal Chute Extension (P/N: 74737-00) • Wear liners made out of special high strength steel • Universal Road Towable Trailer Kit (P/N: 77041-00) • 4-blade fan made out of .375" (9.5mm) steel • 12 Volt Work Light Kit (P/N: 77105-00) • Scrolled fan housing for more efficient transfer of air DRIVE DL12653 • Direct drive DL12720 • Double-banded belt drive with manual belt engagement DISCHARGE CHUTE • 360° rotational 8" (20cm) BUILT TO LAST • Heavy-duty swivel boom with hose storage • 12" (30.5cm) diameter 12' (3.6m) long flex hose • Lightweight aluminum handle • One bolt access cover removal for easy fan clean out MACHINE DIMENSIONS DL12653 • LxWxH – 30" x 50" x 86" (76cm x 127cm x 218cm) DL12720 • LxWxH – 30" x 50" x 86" (76cm x 127cm x 218cm) WEIGHTS DL12653 • 595 lbs. (269.9 kg) DL12720 • 675 lbs. (306.2 kg) 12" model shown mounted on optional trailer kit CFM • DL12653 – 5100 • DL12720 – 5100 38 www.bearcatproducts.com ECHO BEAR CAT GEAR REUSABLE V INYL E ARPLUGS W ITH CASE The handy carrying case can be worn on your belt when not in use. Cleanup is easy with just warm water. CE and OSHA approved. P/N: 31539-00 E AR MUFFS These light-weight ear muffs have an NRR of 29 dB(A) when used as directed and meet CE standard 3.19. P/N: 36775-00 CE EN352-1:2002 SAFET Y GL ASSES HELMET SYSTEM Lightweight and impact resistant. Hard-coated opticalgrade, abrasion resistant lenses. Polycarbonate lenses offer 99.9% protection from the most intense UV rays. Includes helmet, mesh face visor and ear protection. P/N: 36776-00 Tech Glasses P/N: 36773-00 Zone II Glasses P/N: 36774-00 PREMIUM SAFET Y VEST CE EN397:1995 CLASS EG & C CE EN1663B CE EN352-3:1997 LE ATHER WORK GLOVES Premium leather gloves help reduce vibration. Feature form fitting fingers and elastic wrist band for tight fit. Highly visible vest features 5-point tear away panels for safety. P/N: 36777-00 (large) P/N: 36778-00 (xlarge) P/N: 36779-00 (xxlarge) P/N: 33323-00 (LG) P/N: 33324-00 (XL) P/N: 33325-00 (XXL) ISEA 107-2004 888.625.4520 39 WARRANTY COVERAGE CURRENT MODELS 1 of 2 U.S. and Canada PRODUCT ECHO BEAR CAT WARRANTY CHIPPER/SHREDDERS MODEL ENGINE SC2170 COMMERCIAL RENTAL Subaru 170cc N/A N/A SC3206 Briggs & Stratton 205cc N/A N/A SC3265 Subaru 265cc SC3306 Briggs & Stratton 306cc SC3306E Briggs & Stratton 306cc SC3342 Briggs & Stratton 342cc SC3420 Briggs & Stratton 420cc SC5540 SC5540B SC5720B CONSUMER 3 years PARTS LABOR YES YES 1 year 6 months CONSUMER COMMERCIAL RENTAL PARTS LABOR 3 years 1 year 6 months YES YES N/A Subaru 720cc CHIPPERS MODEL ENGINE CH4400 Subaru 404cc CH45540 CH5540 CH5540H N/A CH500H CH800H CH5653 Subaru 653cc CH611DH Kubota 1.1 L CH6720H Subaru 720cc CH8720iH Subaru 720cc CH8993H Briggs & Stratton 993cc CH8540 CH9540H N/A CHF9540H 40 CH911DH Kubota 1.1 L CH922DH Kubota 2.2 L www.bearcatproducts.com WARRANTY COVERAGE CURRENT MODELS 2 of 2 U.S. and Canada WHEELED TRIMMERS MODEL ENGINE WT189 Subaru 189cc WT190 WT190T Briggs & Stratton 190cc CONSUMER COMMERCIAL RENTAL PARTS LABOR 3 years 1 year 6 months YES YES WT190S PRODUCT ECHO BEAR CAT WARRANTY DEBRIS LOADERS MODEL ENGINE DL8 Subaru 404cc DL10 Briggs & Stratton 570cc (elec. start) DL12653 Subaru 653cc DL12720 Subaru 720cc CONSUMER COMMERCIAL RENTAL PARTS LABOR 3 years 1 year 6 months YES YES STUMP GRINDERS MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR SG340 Honda 340cc 3 years 1 year 6 months YES YES MODEL ENGINE WHEELED VACUUMS WV190 WV190S WV160 WV160S CONSUMER COMMERCIAL RENTAL PARTS LABOR 3 years 1 year 6 months YES YES CONSUMER COMMERCIAL RENTAL PARTS LABOR 3 years 1 year 6 months YES YES Briggs & Stratton 190cc Honda 160cc LOG SPLITTERS MODEL ENGINE LS22 Subaru 170cc LS27 Subaru 210cc 3 YEAR WARRANTY: Valid on any ECHO Bear Cat product purchased NEW. “Consumer” defined as: complete unit for residential or non-income producing use. “Commercial” defined as: complete unit for commercial, institutional, agricultural, horticultural or income producing use. “Rental” defined as: complete unit for rental purposes to produce income. *Models SC2170 & SC3206 are classified as Consumer grade products and will not qualify for warranty coverage if used for Commercial or Rental purposes. ENGINE WARRANTY: For Engine Warranty information or service needs regarding the engine of your machine, record the serial number of the engine and refer to the Engine Owners Manual for terms and conditions of the manufacturer or see your nearest dealer. 888.625.4520 41 WARRANTY COVERAGE CURRENT MODELS 1 of 2 All areas Outside the U.S. and Canada PRODUCT ECHO BEAR CAT WARRANTY CHIPPER/SHREDDERS MODEL ENGINE SC2170 COMMERCIAL RENTAL Subaru 170cc N/A N/A SC3206 Briggs & Stratton 205cc N/A N/A SC3265 Subaru 265cc SC3306 Briggs & Stratton 305cc SC3306E Briggs & Stratton 306cc SC3342 Briggs & Stratton 342cc SC3420 Briggs & Stratton 420cc SC5540 SC5540B SC5720B CONSUMER 2 years PARTS LABOR YES YES 1 year 6 months CONSUMER COMMERCIAL RENTAL PARTS LABOR 2 years 1 year 6 months YES YES N/A Subaru 720cc CHIPPERS MODEL ENGINE CH4400 Subaru 404cc CH45540 CH5540 CH5540H N/A CH500H CH800H CH5653 Subaru 653cc CH611DH Kubota 1.1 L CH6720H Subaru 720cc CH8720iH Subaru 720cc CH8993H Briggs & Stratton 993cc CH8540 CH9540H N/A CHF9540H 42 CH911DH Kubota 1.1 L CH922DH Kubota 2.2 L www.bearcatproducts.com WARRANTY COVERAGE CURRENT MODELS 2 of 2 All areas Outside the U.S. and Canada WHEELED TRIMMERS MODEL ENGINE WT189 Subaru 189cc WT190 WT190T Briggs & Stratton 190cc CONSUMER COMMERCIAL RENTAL PARTS LABOR 2 years 1 year 6 months YES YES WT190S PRODUCT ECHO BEAR CAT WARRANTY DEBRIS LOADERS MODEL ENGINE DL8 Subaru 404cc DL10 Briggs & Stratton 570cc (elec. start) DL12653 Subaru 653cc DL12720 Subaru 720cc CONSUMER COMMERCIAL RENTAL PARTS LABOR 2 years 1 year 6 months YES YES STUMP GRINDERS MODEL ENGINE CONSUMER COMMERCIAL RENTAL PARTS LABOR SG340 Honda 340cc 2 years 1 year 6 months YES YES CONSUMER COMMERCIAL RENTAL PARTS LABOR 2 years 1 year 6 months YES YES CONSUMER COMMERCIAL RENTAL PARTS LABOR 2 years 1 year 6 months YES YES WHEELED VACUUMS MODEL WV190 WV190S WV160 WV160S ENGINE Briggs & Stratton 190cc Honda 160cc LOG SPLITTERS MODEL ENGINE LS22 Subaru 170cc LS27 Subaru 210cc NOTE: “Consumer” defined as: complete unit for residential or non-income producing use. “Commercial” defined as: complete unit for commercial, institutional, agricultural, horticultural or income producing use. “Rental” defined as: complete unit for rental purposes to produce income. *Models SC2170, SC2206 & SC3206 are classified as Consumer grade products and will not qualify for warranty coverage if used for Commercial or Rental purposes. ENGINE WARRANTY: For Engine Warranty information or service needs regarding the engine of your machine, record the serial number of the engine and refer to the Engine Owners Manual for terms and conditions of the manufacturer or see your nearest dealer. 888.625.4520 43 BELT REFERENCE GUIDE Part Number 44 Description Models Area Used 12106 Belt, 3V670 Kevlar 72085, 72285, 72385 (SN =>21300), 75011, 75111 12119 Belt, 2RB65 73525 Beater Bar Drive 12273 Belt, 3B90 Banded CH922DH (74950) Drive 12317 Belt, 4L 53 73040, 73050, 73450, 74040, 74450, 74455, 74050, 74060, 74065, 75065, 76065, WT160, WT160T, WT189, WT190, WT190T Drive 12365 Belt, 3VX530 73710, SG340 (73711) Drive 12573 Belt, 3L x 52 Kevlar 73150, 73350, 73265, 73455, 75365, WT160S, WT190S, WT190SE Drive 12660 Belt, 4L350 CH5540H (74554), 74624, 74520 Hyd Feed 16000 Belt, BX-65 70500 Drive 16043 Belt, 29” CH6720H, CH6730H, CH6670H (76624) & CH6993H (76635)(SN>603143), Pump 16043 Belt, 29” SC3206 (70050) (SN>105334), SC3342 (75311) (Single Belt Drive SNC03478) 13426-00 Belt, 2RBP56 SC5540B (73554) Drive 13884-00 Belt, SP BEARVAC (3L32) WV190S (75360) WV179S (77360), and WV160S (75350) Drive 13973-00 Belt, 2RB63 Banded SC5670B (75524) Drive 14261-00 Belt, 3RB48 Banded CH6720H, CH6730H, CH6993H (76635), CH611DH (76628), CH6670H (76624), 74628, 74624, Drive 14770-00 Belt, 2RB61 CH4400, CH45342 (77412), CH45390 (77413) Drive 14804-00 Belt, 5-5V750, Non Cog CH123DH (7812086) Drive Dual Belt Drive 18093-00 Belt, 2RB47 [Qty 2] CH45540 (77454) 18277-00 BX44 Belt CH8720iH, CH8670H (76824), CH8993H (76835) Hydraulic Drive 18531-00 BX30 Belt CH911DH, CH922DH (VIN>5VJAA00178W001015) Hydraulic 18633-00 BX33 Belt CH611DH (76628) Hydraulic 31460-00 Belt, 2BRP67 CH5653 Drive 31498-00 Belt, 2RB40 SC5720B Drive 31995-00 Belt, 5L500 Wrapped Aramid WT24, WT24S, WT24T 32124-00 Belt, 4L180 WT24S Head Transmission 32252-00 Belt, 3RB64 CH8540 (71854), CH9540H (72854), CHF9540H (76854) Drive 32883-00 Belt, 2RBX56 SC5540 (SN>E01243) Drive www.bearcatproducts.com ROTOR & SHREDDER KNIVES KITS SHREDDER KNIVES REPLACEMENT KITS All Kits contain knives, spacers, shafts, hardware and installation instructions Part Number Description Models 70316 Kit, Shredder Knives 70530, 70515, 70525 70972 Kit, Shredder Knives SC5540 (70554), SC5614 (71020), SC5670B (75524), SC5540B (73554), 73525, 71014, 70520 70973 Kit, Shredder Knives (Wide body 3” SC models) SC3265, SC3305 (70080), SC3305E (70085), SC3240 (70380), SC3240T (70580), SC3270, SC3270T, SC3342 (75311), 70385, 70180, SC3306, SC3306E, SC3420 71381 Kit, Shredder Knives (Narrow body 3” SC models) SC3206 (70050) - Serial # C03159 and below 75502-00 Kit, Shredder Knives SC2206 77589-00 Kit, Shredder Knives (Narrow body 3” SC models) SC3206 - Serial # C03478 and above 77613-00 Kit, Shredder Knives SC5720B 77616-00 Kit, Shredder Knives 77618-00 Kit, Optional Additional Shredder Knives SC2170 COMPLETE ROTOR REPLACEMENT ASSEMBLIES Part Number Description Models 70062 Replacement Rotor Assembly, 8 HP machines (SN 25659 and below) (Shredder kit not included) SC3265, SC3305 (70080), SC3305E (70085), SC3240 (70380), SC3240T (70580), SC3270, SC3270T, SC3342 (75311), 70385, 70180, 70277 Replacement Rotor Assembly, 5 HP machines (SN 25659 and below) (Shredder kit not included) SC3206 (70050) 70366 Replacement Rotor Assembly, 5” Chipper/Shredders (SN 26377 and below) (Shredder kit not included) SC5540 (70554), SC5540B (71020), 71014, 70500 73371-00 Replacement Rotor Assembly, 5” Chipper/Shredders SC5670B (75524), SC5540B (73554), 73525 74209-00 Rotor Replacement Assembly, 3” Chipper/Shredders (Wide body models) SC3265, SC3305 (70080), SC3305E (70085), SC3240 (70380), SC3240T (70580), SC3270, SC3270T, SC3342 (75311), 70385, 70180, SC3306, SC3306E, SC3420 75399-00 Rotor Replacement Assembly SC2206 77591-00 Rotor Replacement Assembly SC3206 77612-00 Rotor Replacement Assembly SC5720B 77615-00 Rotor Replacement Assembly SC2170 888.625.4520 45 BLADE KITS KITS CONTAIN ALL NECESSARY BLADES AND HARDWARE 1 of 2 MODELS SN RANGE VIN RANGE KIT P/N DESCRIPTION 3" CHIPPER/SHREDDERS 70515, 70525, 70530 0 - Current 70317 Small Chipper Blade Kit SC2170, SC2206, SC3206 (70050), SC3265, SC3305, SC3306, (70080), SC3305E (70085), SC3306E, SC3420, SC3270 (70380), SC3270T (70580), SC3342 (75311), SC3240, 70385, 70030, 72085, 72285, 70180, 0 - 25658* 70205 Single Edge Small Blade Kit 70738 Tool Steel Blade Kit 76295-00 Chipper Blade Kit 72493 Chipper Blade Kit 25659 - Current 5VJAA00137W000009 Current 4" & 5" CHIPPERS CH4400 CH5653, CH5540, CH4540 (73454), CH5540H (74554), CH500H (74500), 73413 CH4614 (73420) 0 - Current 0 - Current 0 - 705078 5VJAA00197W000009 - Current 4.5" CHIPPERS CH45342 (77412), CH45540 (77454), CH450H, CH45390 (77413) 0 - 902474 0 - 5VJAA00109W001849 74744-00 77412/13 Blade Kit 902475 - Current 5VJAA00109W001850 - Current 76295-00 4-1/2 Chipper Blade Kit 70453 Single Edge Blade Kit 72493 Chipper Blade Kit 0 - 5VJAA00159W001743 74220-00 6 Inch Blade Kit 5VJAA00159W001744 - Current 76293-00 Chipper Blade Kit 5VJAA00157W000010 - Current 71426 8 Inch Chipper Blade Kit 5" CHIPPER/SHREDDERS 0 - 26376* SC5540 (70554), SC5614 (71020), SC5540B (73554), SC5670B (75524), SC5720B, 70500, 70520, 71014, 74520, 73525 26377 - Current 5VJAA00137W000071 - Current 6" CHIPPERS CH6720H, CH6730H, CH6670H (76624), CH611DH (76628), CH6993H (76635), 74624, 74628 CH6614 (71620), CH6614H (72620) 46 0 - 704809 0 - 705118 www.bearcatproducts.com BLADE KITS KITS CONTAIN ALL NECESSARY BLADES AND HARDWARE 2 of 2 MODELS SN RANGE VIN RANGE KIT P/N DESCRIPTION 71426 8 Inch Chipper Blade Kit 76293-00 Chipper Blade Kit 71426 8 Inch Chipper Blade Kit 0 - 901387 71426 8 Inch Chipper Blade Kit 901388 - Current 76293-00 Chipper Blade Kit 502304 - Current 74830-00 Blade Kit 0 - 5VJAA00109W001785 71426 8 Inch Chipper Blade Kit 5VJAA00109W001786 - Current 76293-00 Chipper Blade Kit 73900-00 12" Blade Kit 71445 4 Blade Stump Cutter Kit 76292-00 12 Blade Cutter Replacement Kit 0 - Current 76903-00 12 Blade Cutter Retro Fit Kit (To change from 4 blade to 12 blade system) 0 - Current 76906-00 12 Blade Cutter Upgrade Kit (To change from 6 bolt to 12 bolt system) 8" CHIPPERS CH8720iH, CH8993H (76835), CH8670H (76824) 0 - 704960 0 - 5VJAA00119W001755 5VJAA00119W001756 - Current 904473 - Current 74824, CH800H (74800) 0 - 804669 8" & 9" PTO CHIPPERS CH8540 (71854), CH9540H (72854) CHF9540H (76854) 9" CHIPPERS 0 - 704696 CH911DH (72928), CH922DH (74950) 12" CHIPPERS CH123DH (7812086) 500423 - Current 5VJAA00137W000023 - Current STUMPGRINDERS SG340 (73711), 71755, 71785, 73710 0 - 805549 SG340 810639 - Current 73711 with 12-blade retrograde fit kit, PN: 76256-00 0 - Current SG340 888.625.4520 47 ACCESSORIES Blades and Knives Kits Blade Kit, P/N: 70738 Models: SC2170, SC3206, SC3265, SC3306 SC3306E, SC3342 & SC3420 Blade Kit, P/N: 74830-00 Model CHF9540H (Qty 16 blades) Blade Kit, P/N: 76293-00 Models: CH611DH, CH6720H, CH8720iH, CH8993H, CH911DH, CH922DH, CH8540, CH9540H Blade Kit, P/N: 72493 Models: SC5720B, SC5540, SC5540B, CH5653, CH5540H & CH5540 Shredder Knives Kit P/N: 70972. Models: SC5540 & SC5540B. Blade Kit, P/N: 76295-00 Models: CH4400, CH45540 & CH450H Shredder Knives Kit P/N: 77616-00. Model: SC2170. Additional Knives Kit, P/N: 77618-00 48 www.bearcatproducts.com ACCESSORIES Blades and Knives Kits 3" Chipper/Shredder Screens See model page for specific corresponding part numbers. Fine .375" Medium .75" Shredder Knives Kit P/N: 77613-00. Model: SC5720B Coarse 1.375" (Standard) Wet Debris SC2170 Screens Fine .75" #76893-35 Coarse 1.13" (Standard) #76758-35 Wet Debris #77639-35 Shredder Knives Kit P/N: 77589-00. Model: SC3206 Shredder Knives Kit, P/N: 70973 Models: SC3265, SC3306, SC3306E, SC3342 & SC3420 888.625.4520 2-handled Debris Bag, P/N: 17854 Models: Any models that discharge to the ground 49 ACCESSORIES Two Wheel Tow Kit, P/N: 77000-00 Models: All 3" Chipper/Shredders Attachable Debris Bag, P/N: 70355-00 Models: All 3" Chipper/Shredders Two Wheel Tow Kit, P/N: 77353-00 Models: SC3265, SC3306, SC3306E, SC3342 & SC3420 Blower Kit with 2-Blade Radial Fan P/N: 70251, Models: SC3265, SC3306, SC3306E, SC3342 & SC3420 50 All Weather Cover, P/N: 70093 Models: All 3" Chipper/Shredders Leaf Tamper, P/N: 70089 Models: All 3" Chipper/Shredders www.bearcatproducts.com ACCESSORIES NEW 4.5" x 4.5" (11.4cm x 11.4cm) Discharge Chute P/N: 74634-00. Models: CH4400, CH450H & CH45540 Orchard Chute, P/N: 71725-00 8 & 9in.Models: CH8540, CH8720iH, CH8993H, CH911DH, CH922DH, CH9540H & CHF9540H P/N: 71930-00 6in.Models: NEW Pintle Hitch, P/N: 14900-00 Models: CH611DH, CH6720H, CH8720iH, CH8993H, CH911DH & CH922DH Hour/Tach Kit - Gas P/N: 31605-00 Models: All gasoline engine powered machines Hour Meter Kit - Diesel P/N: 71921 Models: CH611DH, CH911DH & CH922DH 888.625.4520 PTO Dolly Wheels Kit - Set of 4 P/N: 71615-00. Models: All PTO models 12 Tooth Cutter Replacement Kit P/N: 76292-00. Model SG340 Adjustable Feed Speed Kit, P/N: 76820-00 Models: CH611DH & CH6720H 51 ACCESSORIES Wet Debris #70559 Coarse 1.5" (Standard) #70332 Medium .75" Fine .375" #70703 #70531 SC5540 - 5" PTO Chipper/Shredder Screens Model: SC5540 1-speed Blower (4 blade fan w/4" dia. discharge) - P/N: 70487 2-speed Blower (8 blade fan w/6" dia. discharge) - P/N: 71110 Vacuum Hose Kit (8" dia. x 20')- P/N: 71125 (Requires 71110) Fenders & Tail Lights Kit P/N: 77510-00. Models: LS22 & LS27 Log Cradle Kit P/N: 77189-00. Models: LS22 & LS27 52 www.bearcatproducts.com ACCESSORIES 14" Sabre Tooth Blade Saplings up to 4" (10cm) in diameter P/N: 74548-00 14" Triple Blade Brush Cutter P/N: 32086-00 .155" diameter - 10 Pack 20" pre-cut length, P/N: 32029-00 .175" diameter - 10 pack 20" pre-cut length, P/N: 32031-00 .175" diameteer - 75' Donut P/N: 32033-00 Nylon Blade Kit P/N: 73060 .175" diameteer - 3lb. Spool P/N: 32035-00 .155" diameter Round 10 Pack 20" pre-cut length, P/N: 32030-00 Proline Head P/N: 74891-00 Cast Iron Mow Ball P/N: 71629-12 .155" Square, 1 lb. donut P/N: 12391 No Spark Mow ball P/N: 73013-00 Heat-treated Steel Mow Ball P/N: 72704-12 888.625.4520 53 ACCESSORIES 10' Vacuum Hose Kit P/N: 73606-00. Models: All Wheeled Vacuums 6-Bushel Hard Bottomed Debris Bag P/N: 71042-00. Models: All Wheeled Vacuums Caster Wheel Kit P/N: 76967-00. Models: All Wheeled Vacuums Debris Loader Discharge Deflector Cap Kit P/N: 77450-00. Models: DL8 & DL10 Nozzle Wear Plate Kit (Includes hardware) P/N: 73640-00. Models: All Wheeled Vacuums Vacuum Liner Kit (Includes hardware) P/N: 76466-00. Models: All Wheeled Vacuums 54 4' (1.2m) Flexible Discharge Extension P/N: 74737-00. Models: All Debris Loaders www.bearcatproducts.com ACCESSORIES Universal Road Towable Trailer Kit P/N: 77041-00 Models: DL12653 & DL12720 Debris Loader Light Kit P/N: 77105-00. Models: DL10, DL12653 & DL12720 Debris Loader Wear Liner Replacement Kits (Includes hardware) P/N: 77398-00. Models: DL8 & DL10 P/N: 77073-00. Models: DL12653 & DL12720 16" (41cm) Vertical Chute Extension (Includes hardware) P/N: 75888-00. Models: All Debris Loaders To view a complete list of ECHO Bear Cat parts and accessory options, please visit our website www.bearcatproducts.com Debris Loader Receiver Bar Kit (Includes hardware) P/N: 77464-00. Models: DL8 & DL10 888.625.4520 and click on Options and Accessories under the Products tab. 55 ECHO Bear Cat • 237 12th St. NW, West Fargo, ND 58078 For customer service or for your nearest ECHO Bear Cat dealer call 888.625.4520 For International call 701.282.5520 Specifications, descriptions and illustrative material in this literature is as accurate as known at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories and may not include all standard equipment ©2016 ECHO Bear Cat, a subsidiary of ECHO Incorporated All Rights Reserved. Printed in the U.S. #32968-00 • 1/17

Core Products - This Website Is Under Construction. Will Be Used For

Rating

Date

Size

Views

Categories

Share

Transcript

Forgot your password?.