Transcript
COSASCO® Bluetooth® Suite ER Probe Reader Bluetooth Kit
The ER Probe Reader Bluetooth Kit is a convenient and portable standard Electrical Resistance (ER) instrument kit for measuring corrosion rate in any process media. The ER Probe Reader (ER-100) directly connects to ER Standard/Temperature probes*. Measurement readings are displayed and recorded by the Transfer Unit (TU500). A cable is only required where access to a probe is difficult and an extension cable is used to position the ER-100 at an easy access location. The ER-100 may be read by the TU-500 from up to 32 ft. (10m) distance with clear line of site. The ER-100 reader replaces the previous Checkmate and CK-4 instrument when used with the TU500 Transfer Unit.
ER Metal Loss Measurements in any Media Reads all ER standard/temperature probes Rapid measurement cycle Improved resolution Bluetooth Communication Easy data transfer via wireless bluetooth Wireless range up to 32 ft (10m) line of sight No more cables required Quick Data Download 50% faster data download than legacy handhelds Download of data to PC-Wirelessly Hazardous Area Location Certified ER-100 Shown with a 4500 ER Probe
*Some probes require an S to B probe adapter (included)
Intrinsically safe ( IECEx/ATEX/CCSAUS) Certified for use in class I, zone 1 IP20 rated enclosure
ER Probe Reader Bluetooth Kit
Typical System-High Pressure Transfer Unit
ER Probe Reader
Probe Adapter
Hollow Plug
High Pressure Retaining Cover
Cosasco Flarweld Access Fitting
ER Retrievable Probe
ER Corrosion Monitoring Point: High Pressure (up to 6000 psi) The above diagram shows the equipment required for a typical high pressure corrosion monitoring point using electrical resistance measurement technology. A typical ER probe reading system consists of an ER probe connected to a hollow plug and inserted into a Cosasco Access Fitting that has been welded onto the pipeline. The ER probe can be installed and retrieved under full operating pressure using a Cosasco Retriever and Service Valve. The ER-100 Probe Reader and Probe Adapter are placed into the probe. The TU-500 Transfer Unit communicates wirelessly with the ER-100 to take a metal loss reading. Collected readings on the TU-500 can be downloaded wirelessly to a PC running Cosasco Data Offline Software for graphing and analysis.
ER Probe Reader Bluetooth Kit
Typical System-Low Pressure ER Probe Reader
1” NPT Nipple Ball Valve
Threadolet ER Retractable Probe
ER Corrosion Monitoring Point: Low Pressure (up to 1500 psi) The above diagram shows the equipment required for a typical low pressure corrosion monitoring point using electrical resistance measurement technology. The electronic part of the ER Probe reading system works the same as the high pressure system except it does not require a probe adapter between the retractable probe and ER-100 when taking a reading. A standard Threadolet is welded onto the pipeline and a ball valve is installed and remains in situ. A retractable probe is installed and retracted under full operating pressure using a Cosasco Model 60 Retractor Kit.
ER Probe Reader Bluetooth Kit
ER-100 Specifications Compatibility
All ER standard/temperature probes
Metal Loss Resolution
0.01% of Probe Span
Metal Loss Repeatability
0.1% of Probe Span
Power Source
2 AA Lithium Batteries: P/N 095820, alternate P/N 095818 (do not mix)
Battery Life
1700 probe readings, typical 2700 probe readings, optimal
Temperature Range
Operating: -40oF to 158oF (-40oC to 70oC) Storage: -40oF to 158oF (-40oC to 70oC)
Probe Cable
Extension Cables up to 250 ft. (76m) (excludes temperature probes)
Enclosure
IP20 Rated
Dimensions
6.69”H x 2.4”W x 1.44”D (17 cm x 6.1 cm x 3.66 cm)
Bluetooth
Range: 32 ft. (10m), line of sight Communications: Bluetooth Class v2.0 Approvals: FCC/IC/CE0539 Antenna: Integrated 2 dBi typical, 4 dBi maximum
Hazardous Area Certification
ATEX Certification Sira 14 ATEX 2261X Ex ib IIC T4 Gb, Ta = -40oC to +70oC IEC Ex Certification IECEx SIR 14.0094X Ex ib IIC T4 Gb, Ta = -40oC to +70oC
North American Certifications CSA Certificate: 70043803 CSAUS Class I, Zone 1, AEx ib IIC T4 Gb, Ta = -40oC to +70oC CSA Ex ib IIC T4 Gb, Ta = -40oC to +70oC C
Dimensions 2.4 in (6.1 cm)
6.69 in (17 cm)
1.44 In. (3.66 cm)
ER Probe Reader Bluetooth Kit
TU-500 Specifications Compatibility
-All ER and LPR Dataloggers -MICROCOR® ER Datalogger -All legacy ER and LPR Remote Data Collectors and MICROCOR® ER Dataloggers -ER and LPR Probe Readers -ULTRACORR® 2 Reader/Datalogger -Ultracorr Sensors (when used with Ultracorr 2 Reader/Datalogger)
Memory
Microcor ID’s 1-99 and all other ID’s 1-255
Data Transfer
Bluetooth
Power Source
2 AA Lithium Batteries: P/N 095820, alternate P/N 095818 (do not mix)
Battery Life
4000 probe readings, typical for ER-100 6000 probe readings optimum for ER-100
Display
Four Line Liquid Crystal Display (LCD)
Temperature Range
Operating: -40oF to 158oF (-40oC to 70oC) Storage: -40oF to 158oF (-40oC to 70oC)
Enclosure
IP20 rated enclosure with sealed membrane keypad
Dimensions
6.24”H x 3.35”W x .91”D (15.8 cm x 8.51 cm x 2.31 cm)
Bluetooth
Range: 32 ft. (10m), line of sight Communications: Bluetooth Class v2.0 Approvals: FCC/IC/CE0539 Antenna: Integrated 2 dBi typical, 4 dBi maximum
Hazardous Area Certification
ATEX Certification SIRA 14 ATEX 2263X Ex ia IIC T4 Ga Ta = -40oC to +70oC IEC Ex Certification IECEx SIR 14.0096X Ex ia IIC T4 Ga Ta = -40oC to +70oC
North American Certifications CSA Certification: 70007061 CSAUS Class I, Zone 0, AEx ia IIC T4 Ga, Ta = -40oC to +70oC CSA Ex ia IIC T4 Ga, Ta = -40oC to +70oC C
Dimensions 3.35 In. (8.51 cm)
0.91 In. (2.31 cm)
6.24 In. (15.8 cm)
2.87 In. (7.29 cm)
0.88 In. (2.24 cm)
ER Probe Reader Bluetooth Kit
Ordering Recommendation Part Number
Description
ER Probe Reader
Bluetooth Kit
BT-0-1-0-1-0-0
ER Probe Reader, Transfer Unit, S to B Probe Adapter, Test Probe, Batteries*, and User Manual
ER Probe Reader with Cosasco Data Offline Software
BT-0-1-0-1-1-0
ER Probe Reader, Transfer Unit, S to B Probe Adapter, Test Probe, Batteries*, User Manual , and Cosasco Data Offline Software
ER Probe Reader plus LPR Probe Reader
BT-1-1-0-1-0-0
ER and LPR Probe Reader**, Transfer Unit,S to B Probe Adapter, Test Probe, Batteries*, and User Manual.
ER Probe Reader plus LPR Probe Reader with Cosasco Data Offline Software
BT-1-1-0-1-1-0
ER and LPR Probe Reader**, Transfer Unit, S to B Probe Adapter, Test Probe, Batteries*, User Manual, and Cosasco Data Offline Software.
*Batteries for all devices included in package ** See datasheet LPR-100-PR-DS rev- for details on LPR Probe Reader
Ordering Information Model BT
Description ER Probe Reader Bluetooth Kit Code
LPR Probe Reader (LPR-100)
0
WIthout LPR Probe Reader
1
With LPR Probe Reader (Standard) Code
ER Probe Reader (ER-100)
0
WIthout ER Probe Reader
1
With ER Probe Reader (Standard) Code
Legacy Converter (LC-500)
0
Without Legacy Converter
1
With Legacy Converter (Standard) Code
Transfer Unit (TU-100)
0
Without Transfer Unit
1
With Transfer Unit Code
PC Software
0
Without Cosasco Data Offline
1
With Cosasco Data Offline Code
BT
0
1
1
1
0
Carrying Case
0
Without Carrying Case
1
With Carrying Case
0
Example
ER Probe Reader Bluetooth Kit
Accessories and Replacement Parts Part Number
Description
TU-500-1
Transfer Unit
ER-100-1
ER Probe Reader
LPR-100-1
LPR Probe Reader
726070
S to B Probe Adapter
028043
Portable Probe Adapter (for 4000 Series Probes)
726034
Carrying Case
AA Lithium Battery
095820
Standard ER Test Probe
723235
Standard LPR Test Probe
710764
Extension Cable
See ER and LPR Probe Accessories Datasheet
Cosasco 11841 Smith Avenue Santa Fe Springs, CA 90670, USA Tel: 1-562-949-0123 Email:
[email protected] Web Site: www.cosasco.com
Carrying Case Holds Transfer Unit, two Probe Reader Modules and Legacy Converter
©Rohrback Cosasco Systems, Inc. All rights reserved The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described wherein or their use or applicability. We reserve the right to modify or improve the designs or specifications of our products at any time without notice. Rohrback Cosasco Systems Corrosion Monitoring Equipment is manufactured and sold under one or more of the following US Patents: 4138878, 4238298, 4338563, 4514681, 4537071, 4587479, 4605626, 4625557, 4755744, 4839580, 4841787, 4882537 5243297.
ER-100-DS rev- A Rev. Date 08/05/2016
www.cosasco.com
