Transcript
Passive
T-Adapters and Testers When installing a cabling system, checking for open or short circuits is always an important requirement. Signamax remote cable testers answer the need for testing the T568A/T568B wire schemes as well as help to identify open or short circuits faults for all types of cabling, both UTP and STP.
E079X
Remote Cable Tester with USB Port and T-Adapters PART NO
DESCRIPTION
E097X
Remote Cable Tester with USB Port
TA-V1
T-Adapter for Splitting 4-Pair Port to 10BaseT and Telephone Ports
TA-V2
T-Adapter for Splitting 4-Pair Port to Two 10BaseT Ports
TA-V3
T-Adapter for Splitting 4-Pair Port to Two Telephone Ports
TA-V1
T-Adapters must be used in pairs.
Couplers and Connection Boxes Signamax couplers and connection boxes allow a simple operation with installation cables, which can be easily extended. Broken cables can be coupled with no need to install new complete cable segment. Connection boxes can be used for all standard 4- to 8-wire installation cables of AWG 26-22 up to 10 mm outer diameter.
KRJ45-VEB6
KRJS45-VEB6
KRJ45/5S-SH
Couplers and Connection Boxes PART NO
DESCRIPTION
KRJ45-S
Coupler RJ45 8p8c, Category 5E, Unshielded
KRJ45-VEBB
Coupler RJ45 8p8c, Category 5E, Shielded
KRJ45/5S
Panel Mount Feed-Thru Coupler RJ45 8p8c, Category 5E, Unshielded
KRJ45/5S-SH
Panel Mount Feed-Thru Coupler RJ45 8p8c, Category 5E, Shielded
KRJ45-VEB5
Connection Box LSA+, Category 5E, Unshielded
KRJS45-VEB5
Connection Box LSA+, Category 5E, Shielded
KRJ45-VEB6
Connection Box LSA+, Category 6, Unshielded
KRJS45-VEB6
Connection Box LSA+, Category 6, Shielded
www.signamax.eu
