Covet 4 Wheel Stroller

Transcript

covet 4 wheel stroller follow us on motherschoice.com.au instruction manual the only choice assembling the stroller contents pg. Components list .................................... 4 Opening stroller .................................... 5 Fitting seat .......................................... 6 Wheels assembly ............................... 7 Bumper bar .......................................... 8 Canopy .................................................. 9 using the stroller Front swivel wheels ........................... 10 Operating brakes ................................ 11 Reverse seat ...................................... 12 Adjusting handle & legrest ............... 13 Adjusting backrest .............................. 14 Harness adjustment buckle ............ 15 Adjusting harness height ................... 16 Tether strap ........................................ 17 Folding stroller ................................... 18 Unfolding stroller ................................ 19 Accessories ....................................... 20 care and maintenance Care and maintenance ...................... 21 Product registration ........................... 23 contacts 2 2 Customer service .............................. 24 These instructions detail the safe use, assembly and maintenance of your product. Please read these instructions carefully and ensure that they are followed at all times. Failure to do so could result in serious injury or death. WARNING • • • • • • • • • • • • • • • • • • • TO AVOID INJURY OR DEATH: ALWAYS APPLY THE BRAKES WHENEVER YOU PARK THE STROLLER. DO NOT LEAVE CHILDREN UNATTENDED. SECURE THE CHILD IN THE HARNESS AT ALL TIMES AND ENSURE THAT THE SAFETY HARNESS IS ADJUSTED FIRMLY BUT COMFORTABLY TO THE CHILD’S BODY. DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER. MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU ADJUST THE STROLLER, OTHERWISE THEY MAY BE INJURED. A harness can form loops that may be a strangulation hazard, never leave harness straps connected when not fitted to a child in the stroller. Remove child from the stroller before going up or downstairs or escalators. Use the tether strap to prevent the stroller rolling away (see page 10). Do not allow children to stand on the seat or footrest. Do not attempt to lift the stroller by the bumper bar or child tray, if it has one. Remove the child from the stroller before going up or down stairs or escalators. Regularly inspect the stroller for any parts that are loose, broken, torn or missing. Attend to the problem as soon as it is noticed. Use only those accessories which are supplied by Dorel Australia, and approved for use with this stroller. Do not use the stroller near an open fire, barbecue, or exposed flame. This product is not intended for commercial use. Do not run or jog with this stroller. The Covet 4 wheel stroller has been approved in accordance with AS/ NZS 2088/2009. Weight of the child using this stroller should not be more than 17kg. Maximum weight for shopping basket 4kg. Cup holder 1kg. 3 covet 4 wheel stroller components list P A B C D O E F G N M H I L J A Handle B Handle adjustment (both sides) C Folding lock (both sides) D Tether strap E Cup holder 4 Q K F Seat release button (both sides) G Legrest adjustment button H Brake lever I Rear wheel assembly J Carry basket K Front wheels L Swivel locks M Adjustable legrest N Safety harness O Bumper bar P Canopy Q Raincover covet 4 wheel stroller assembling stroller 1a Step 1: opening stroller storage latch • If the stroller has a security tie, please remove it. • Release the storage latch (Figure 1a). • Lay stroller on the side, simultaneously lift handle while pulling on the frame until the locking mechanism engages (Figure 1b). • Push down on the handle to check that locks have fully engaged. 1b mother’s choice tip... The seat is not attached to the frame. Move it to a safe location for later installation. 5 covet 4 wheel stroller assembling stroller Step 2: rear wheel assembly push click! 2a • Slide rear wheels onto the frame of the stroller (Figure 2a). • Push the wheels in until you hear them lock in place. Listen for ‘click’. • To remove the rear wheel assembly, pull and hold the metal tab while removing rear wheel from the axle (Figure 2b). Repeat on the other side. pull 2b Step 3: front wheel assembly • Lay the open stroller upside down with the handle on the floor. • Align the shaft on the wheel with the hole in the front leg and push in (Figure 3a). 3a Listen for a ‘click’. • Repeat on the other side. • To remove the front wheel assembly, locate the metal pin behind the front tube and press it inwards while pulling the wheel off (Figure 3b). 3b 6 click! push push pull covet 4 wheel stroller assembling stroller push click! Step 4: fitting seat • Align the seat with the frame and push, listening for a ‘click’ to lock in place (Figure 4a). • Adjust the legrest by pressing both adjustment buttons and rotating to the desired position (Figure 4b). 4a push (1) 4b rotate (2) 7 covet 4 wheel stroller assembling stroller Step 5: attach bumper bar • Align bumper bar shaft with the hole in the frame and push in (Figure 5a). • Listen for the ‘click’, then repeat on the other side. 5a Removing bumper bar • To remove bumper bar, press both grey buttons under the bumper bar (Figure 5b), and remove. pull (2) 5b push (1) 8 covet 4 wheels stroller assembling stroller sli at de t ta o ch Step 6: attaching canopy 6a Using and removing canopy push down to lock sli remde t ov o e pull up to unlock 9 • Align both canopy ends with the plastic sliders on the frame (Figure 6a). • Slide the ends of the canopy down until they are fully engaged. • Push both the locking tabs down (Figure 6b). 6b • To use the canopy, pull the front edge of the canopy forward to open or push backward to fold. • To remove the canopy, pull the locking tabs up (Figure 6b) and slide the canopy ends off the sliders (Figure 6c). 6c 9 covet 4 wheel stroller using stroller Operating front swivel wheels • Position the front wheel as per Figure 7a. • To lock, align the swivel lock button with the frame and push upwards (Figure 7b). • To unlock, push the swivel lock button downwards (Figure 7c). 7a push push 7b 7c 10 covet 4 wheel stroller using stroller Operating brakes • To apply the brake, press down firmly on the brake pedal using the ball of your foot (Figure 8a). • To release the brake, lift the brake pedal until the brakes have fully disengaged (Figure 8b). mother’s choice tip... Ensure the brakes are fully engaged when you park your stroller. 8a push to lock 8b lift to unlock WARNING Apply all brakes whenever you park the stroller. 11 11 covet 4 wheel stroller using stroller lift (2) press (1) to face seat in opposite direction • Press the seat release button on both sides and lift seat (Figure 9a). • Turn the stroller seat around and align with the frame and gently push down (Figure 9b). • Listen for ‘click’ to lock in place. 9a push click! 9b 12 covet 4 wheel stroller using stroller press both sides adjusting handle adjusting legrest • Press both adjustment buttons simultaneously and rotate to the desired position (Figure 11). • Listen for ‘click’ to lock in place. 11 10a rotate • Press both adjustment buttons simultaneously (Figure 10a). • Rotate to the desired position (Figure 10b). 10b push (1) rotate (2) 13 covet 4 wheel stroller using stroller Operating the backrest recline lever • Lift the lever (Figure 12a) and rotate the seat into the desired position (Figure 12b) 12a 12b lift rotate mother’s choice tip... The backrest can be adjusted into 3 different positions. CAUTION Ensure child’s limbs are inside the seating area before adjusting the backrest. 14 covet 4 wheel stroller using stroller WARNING harness adjustment buckle • The harness strap can be adjusted by moving each strap’s slider (A) (Figure 13a). • The buckle is released by pressing the centre button (Figure 13b). Use this harness at all times. A five-point harness is provided to secure your child. When not in use disconnect shoulder straps from the waist strap and buckle. 13a click! 13b press 15 covet 4 wheel stroller using stroller lower slot adjusting harness height upper slot 14a 14b • The harness can be set at two heights, as displayed in Figure 14a and14b. • To use the lower slot, undo the buckle and feed the shoulder straps in through the loop (Figure 14c) before securing harness. • To use the upper slot, undo the buckle and feed both shoulder straps out through the loop (Figure 14d), and allow to hang over the loop before securing the harness. 14c lower slot use 16 14d upper slot use 16 covet 4 wheel stroller using stroller tether strap • Whenever a child is in the stroller and brakes are NOT engaged, the large loop should be around your wrist (Figure 15). WARNING Correct use of the tether strap will prevent stroller runaway and possible injury to your child. 17 15 17 covet 4 wheel stroller using stroller folding stroller • • • • Fold the canopy back. Unlock the swivel wheels. Apply all brakes. Adjust the seat backrest to full layback position. • Press and pull folding lock on the right hand side while pulling secondary lock on the left hand side (Figure 16a). • Press down on the handle to fold the stroller while pulling on the folding locks. • The storage latch will automatically engage when fully folded (Figure 16b). press (1) pull (2) pull (2) 16a 16b storage latch mother’s choice tip... Make sure the seat is facing forward when folding. 18 x 18 covet 4 wheel stroller using stroller unfolding stroller • Release the storage latch (Figure 17a). • Lift handle until stroller is fully open and locking mechanism engages (Figure 17b). • Push down on the handle to check that the locks have been fully engaged. 17a unclip storage latch lift 17b 19 19 covet 4 wheel stroller accessories raincover • Spread the raincover over the stroller and pull over the seat (Figure 17). Use elastic straps to secure to stroller. 17 Cupholder • Slide cupholder onto mounting bracket on stroller frame (Figure 18). • Maximum weight for cupholder is 1kg. WARNING DO NOT place hot liquids in this cupholder. Hot liquids can burn your child. 18 20 20 covet 4 wheel stroller care and maintenance • • • • • • • • • Always store in a clean and dry place. Clean the frame by wiping with a damp cloth. Do not use abrasives, bleach or strong detergents. Spot clean fabrics with warm water and mild soap. Ensure fabric is dry before storing. Occasionally clean and lubricate wheels and axles with a light lubricating oil. Regularly check for loose parts and tighten when required. Damaged or broken parts should be immediately replaced. 21 notes: 22 mother’s choice tip... Visit us online to register your new Mother’s Choice product. follow us on motherschoice.com.au www.motherschoice.com.au/product-registration benefits of registration • Your safety - allows us to contact you with important product notifications. • Confirmation of ownership - provides a record in case of product loss or theft. • Improved product development - helps us continue to design products that meet your needs. to prevent loss or fading, please attach your receipt here: 23 motherschoice.com.au IGC DOREL NEW ZEALAND LTD 14 Sir William Avenue East Tamaki Auckland 2013 Email: [email protected] Phone: 0800 628 000 (toll free) Hours: 8:00 am - 5:00 pm Monday to Friday Specifications are subject to change without notice. Copy or reproduction without permission is prohibited. © 2013 Dorel Australia Pty Ltd. All Rights Reserved. www.dorel.com.au 014954 - Covet 4 wheel stroller - 02 - 14 DOREL AUSTRALIA PTY LTD 655-685 Somerville Road Sunshine West Victoria 3020 Email: [email protected] Phone: 1300 809 526 Hours: 8:30 am - 5:00 pm Monday to Friday