Preview only show first 10 pages with watermark. For full document please download

Cp2501dk Development Kit Quick

   EMBED

Share

Transcript

CP2501DK D EVELOPMENT K I T Q U IC K -S TART G UIDE Installation 1 Connect the Daughter Board to the Main Board socket connector. Connect USB cable to Main Board DEBUG connector. 2 3 Connect USB cable to PC. J 3 P3 J13 J7 VDD_DEBUG VDD_PWR +3VD TB1 J3 P3 J1 J13 J7 VDD_DEBUG SMBUS_SDA J15 VPP VDD_PWR SMBUS_SCL +3 VD TB1 GND J1 SMBUS_SDA CP2501 -GM EDB P 1 J15 VPP SMBUS_SCL TB2 GND CP2501 -GM EDB SILICON LABS P3 U 1 www.silabs .com UART_RX J 2 UART_TX F34A GND P1 J1 VBUS SILICON LABS P3 TB2 www.silabs .com U1 TB3 VREGIN VD D SPI_SCLK P 2 UART_ RX F34A SPI_MISO J2 SPI_MOSI UART_TX U 1 SPI_NSS J1 D10 F 326 GND SILICON LABS www.silabs .com GND VBUS D11 CP250x-MB VREGIN RESET VDD D12 TB3 P5 SPI_SCLK P2 SPI_MISO SPI_MOSI U1 SPI_NSS SILICO N LABS D10 F 326 www.silabs. com GND CP250x-MB D11 RESET D12 P5 Connect power supply to Main Board. 4 5 Insert Development Kit CD in CD-ROM Drive. J 3 P3 J13 J7 VDD_DEBUG VDD_PWR +3VD TB1 J1 SMBUS_SDA J15 VPP SMBUS_SCL GND CP2501-GM EDB P 1 TB2 SILICO N LABS P3 U 1 UART_RX J 2 www.silabs .com UART_TX F34A GND J1 VBUS TB3 VREGIN VD D SPI_SCLK P 2 SPI_MISO SPI_MOSI U 1 SPI_NSS SILICON LABS D10 F326 www.silabs .com GND CP250x-MB D11 RESET Note: If autorun does not launch the introduction window, run "SETUP.EXE" directly from the CD. D12 P5 6 Select “Install Silicon Laboratories IDE” from the introduction window and follow the on-screen instructions. Silicon Laboratories Inc. 400 West Cesar Chavez Austin, TX 78701 Email: [email protected] Internet: www.silabs.com From the Programs list in the Start menu, select Silicon Laboratories and click on the Silicon Laboratories IDE logo. 7 Copyright © 2010 by Silicon Laboratories 8 Silicon Laboratories IDE opens. Rev. 0.1 8/10 Example Program If you are having trouble installing and/or using the development kit, please use the following support resources:  CP2501 Development Kit User's Guide (click "Browse Documentation" from the CD introduction window)  Latest versions of Application Notes can be found at http://www.silabs.com/products/microcontroller/applications.asp  MCU Knowledgebase (available at www.silabs.com  SUPPORT)  Contact an Applications Engineer using the online information request form (available at www.silabs.com  SUPPORT). 2 Rev. 0.1