Cpc1017n

Transcript

CPC1017N 60V Normally-Open Single-Pole 4-Pin SOP OptoMOS® Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) LED Current to operate Rating 60 100 16 1 Units VP mArms / mADC  mA Features • Designed for Use in Security Systems Complying with EN50130-4 • Only 1mA of LED Current Required to Operate • 1500Vrms Input/Output Isolation • High Reliability • Arc-Free With No Snubbing Circuits • No EMI/RFI Generation • Immune to Radiated EM Fields • Wave Solderable • Tape & Reel Version Available • Small 4-Pin SOP Package Applications • Security • Passive Infrared Detectors (PIR) • Data Signalling • Sensor Circuitry • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment—Patient/Equipment Isolation • Aerospace • Industrial Controls Description The CPC1017N is a miniature single-pole, normally-open (1-Form-A) solid state relay in a 4-pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input to output isolation. The super-efficient MOSFET switches and photovoltaic die use IXYS Integrated Circuits Division’s patented OptoMOS architecture while the optically coupled output is controlled by a highly efficient infrared LED. IXYS Integrated Circuits Division’s state of the art double-molded vertical construction packaging enables CPC1017N to be one of the world’s smallest relays. It offers board space savings of at least 20% over the competitor’s larger 4-pin SOP relay. Approvals • UL Recognized Component: File E76270 • CSA Certified Component: Certificate 1172007 • EN/IEC 60950-1 Certified Component: Certificate B 13 12 82667 003 Ordering Information Part # CPC1017N CPC1017NTR Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel) Pin Configuration + Control – Control 1 4 3 2 Load Load Switching Characteristics of Normally-Open Devices Form-A IF 90% 10% ILOAD ton DS-CPC1017N-R09 www.ixysic.com toff 1 INTEGRATED CIRCUITS DIVISION CPC1017N Absolute Maximum Ratings @ 25ºC Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 60 5 50 1 70 400 1500 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW Vrms ºC ºC Typical values are characteristic of the device at +25°C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements. Derate linearly 3.33 mW / ºC Electrical Characteristics @ 25ºC Parameter Output Characteristics Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate 3 Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Capacitance, Input to Output 1 2 3 2 Conditions Symbol Min Typ Max Units IF=2mA t=10ms IL=100mA VL=60VP IL ILPK RON ILEAK - - 100 ±350 16 1 mArms / mADC mAP  IF=0mA, VL=50V, f=1MHz ton toff COUT - 5 10 10 - ms ms pF IL=100mA IF=5mA VR=5V IF IF VF IR 0.3 0.9 - 0.4 1.2 - 1 1.4 10 mA mA V A VIO=0V, f=1MHz CIO - 1 - pF IF=5mA, VL=10V A Load current derates linearly from 100mA @ 25ºC to 80mA @ 80ºC. Measurement taken within 1 second of on-time. For applications requiring high temperature operation (greater than 60ºC) a minimum LED drive current of 3mA is recommended. www.ixysic.com R09 INTEGRATED CIRCUITS DIVISION CPC1017N PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted)* Typical Turn-On Time (N=50, IF=5mA, IL=100mA) 35 Device Count (N) Device Count (N) 30 25 20 15 10 25 25 20 20 Device Count (N) Typical LED Forward Voltage Drop (N=50, IF=5mA) 15 10 5 Typical Turn-Off Time (N=50, IF=5mA, IL=100mA) 15 10 5 5 1.0 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) Typical IF for Switch Operation (N=50, IL=100mA) 25 25 Device Count (N) 20 15 10 0 0.45 0.50 0.55 1.4 1.5 0.26 1.6 0.28 0.30 0.32 0.34 0.36 0.38 Turn-On Time (ms) Turn-Off Time (ms) Typical IF for Switch Dropout (N=50, IL=100mA) Typical On-Resistance Distribution (N=50, IL=100mA) 35 30 10 0 0.40 1.3 15 5 0.35 1.2 20 5 0.30 1.1 Device Count (N) 1.17 Device Count (N) 0 0 0 25 20 15 10 5 0 0.30 0.60 0.35 LED Current (mA) 0.40 0.45 0.50 0.55 LED Current (mA) 6.8 0.60 6.9 7.0 7.1 7.2 On-Resistance (:) 7.3 7.4 Typical Blocking Voltage Distribution (N=50) 35 Device Count (N) 30 25 20 15 10 5 0 80 82 84 86 88 90 92 Blocking Voltage (VP) Typical Turn-On Time vs. LED Forward Current (IL=100mA) 1.6 1.4 IF=50mA 1.2 IF=10mA IF=5mA 1.0 0.8 -40 -20 0 20 40 60 80 Temperature (ºC) 100 120 3.0 2.7 2.4 2.1 1.8 1.5 1.2 0.9 0.6 0.3 0 Typical Turn-Off Time vs. LED Forward Current (IL=100mA) 0.7 0.6 Turn-Off Time (ms) 1.8 Turn-On Time (ms) LED Forward Voltage Drop (V) Typical LED Forward Voltage Drop vs. Temperature 0.5 0.4 0.3 0.2 0.1 0 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R09 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION CPC1017N PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted)* 3.5 Turn-On Time (ms) 2.0 1.5 1.0 0.5 -20 0 20 40 60 Temperature (ºC) 80 100 Typical On-Resistance vs. Temperature (IL=Max Rated @ Temperature) 10 Steady State 8 Instantaneous IF=5mA 6 IF=5mA 1.5 0 20 40 60 Temperature (ºC) 80 2 -40 -150 -1.5 IF=2mA -20 0 20 40 60 Temperature (ºC) 80 100 Typical Maximum Load Current vs. Temperature 180 160 -50 -100 IF=5mA Typical Load Current vs. Load Voltage (IF=5mA) 0 4 Typical Turn-Off Time vs. Temperature (IL=50mA) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -40 100 50 140 120 100 IF=5mA 80 IF=2mA 60 40 20 -20 0 20 40 60 Temperature (ºC) 80 100 Typical Blocking Voltage vs. Temperature 91 0.016 89 0.014 87 Leakage (PA) Blocking Voltage (VP) -20 100 Load Current (mA) On-Resistance (:) IF=2mA IF=5mA 2.0 150 14 12 IF=2mA 2.5 1.0 -40 0 -40 3.0 85 83 81 -1.0 -0.5 0 0.5 Load Voltage (V) 1.0 14 0.012 0.010 0.008 0.006 0.002 0 -40 77 -40 -20 0 20 40 60 Temperature (ºC) 80 100 -40 Typical Leakage vs. Temperature Measured Across Pins 3&4 (VL=60V) 0.004 79 0 1.5 Output Capacitance (pF) LED Current (mA) 2.5 Typical Turn-On Time vs. Temperature (IL=50mA) Load Current (mA) 3.0 Turn-Off Time (ms) Typical IF for Switch Operation vs. Temperature (IL=80mA) -20 0 20 40 60 80 Temperature (ºC) 100 120 Output Capacitance vs. Load Voltage (IF=0mA, f=1MHz) 12 10 8 6 4 -20 0 20 40 60 Temperature (ºC) 80 100 0 10 20 30 40 Load Voltage (V) 50 60 Load Current (A) Energy Rating Curve 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R09 INTEGRATED CIRCUITS DIVISION CPC1017N Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating CPC1017N MSL 3 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Soldering Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time Maximum Reflow Cycles CPC1017N 260ºC for 30 seconds 3 Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. R09 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION CPC1017N MECHANICAL DIMENSIONS CPC1017N 4.089 ± 0.203 (0.161 ± 0.008) Recommended PCB Land Pattern 0.200 ± 0.025 (0.008 ± 0.001) 0.60 (0.0217) 6.096 ± 0.102 (0.240 ± 0.004) 3.810 ± 0.076 (0.150 ± 0.003) 0.432 ± 0.127 (0.017 ± 0.005) 5.60 (0.2205) 1.02 ± 0.025 (0.040 ± 0.001) Pin 1 2.54 Typ (0.100 Typ) 1.30 (0.0512) 2.184 Max (0.086 Max) 2.54 (0.10) Pin to package standoff: 0.0637 ± 0.0383 (0.0025 ± 0.0015) CPC1017N 0.762 ± 0.102 (0.030 ± 0.004) device weight = 0.076 grams Dimensions mm (inches) 0.381 TYP. (0.015 TYP.) CPC1017NTR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 (0.472) B0=4.70 (0.185) K0=2.70 (0.106) K1=2.30 (0.091) P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Dimensions mm (inches) Embossed Carrier Embossment NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-CPC1017N-R09 ©Copyright 2014, IXYS Integrated Circuits Division OptoMOS® is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 9/24/2014