Transcript
CPC1018N 60V Normally-Open Single-Pole 4-Pin SOP OptoMOS® Relay
INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) LED Current to operate
Rating 60 600 0.8 1
Units VP mArms / mADC mA
Features • Designed for Use in Security Systems Complying with EN50130-4 • Only 1mA of LED Current Required to Operate • 1500Vrms Input/Output Isolation • Small 4-Pin SOP Package • High Reliability • Arc-Free With No Snubbing Circuits • No EMI/RFI Generation • Immune to Radiated EM Fields • Wave Solderable • Tape & Reel Version Available
Applications • Security • Passive Infrared Detectors (PIR) • Data Signalling • Sensor Circuitry • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment—Patient/Equipment Isolation • Aerospace • Industrial Controls
Description The CPC1018N is a miniature single-pole, normally-open (1-Form-A) solid state relay in a 4-pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input to output isolation. The super efficient MOSFET switches and photovoltaic die use IXYS Integrated Circuits Division’s patented OptoMOS architecture while the optically coupled output is controlled by a highly efficient infrared LED. IXYS Integrated Circuits Division’s state of the art double-molded vertical construction packaging enables the CPC1018N to be one of the world’s smallest relays. It offers board space savings of at least 20% over the competitor’s larger 4-pin SOP relay.
Approvals • UL Recognized Component: File E76270 • CSA Certified Component: Certificate 1172007 • EN/IEC 60950-1 Certified Component: Certificate B 13 12 82667 003
Ordering Information Part # CPC1018N CPC1018NTR
Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel)
Pin Configuration + Control
– Control
1
4
3
2
Load
Load
Switching Characteristics of Normally-Open Devices Form-A IF 90% 10%
ILOAD ton
DS-CPC1018N-R12
www.ixysic.com
toff
1
INTEGRATED CIRCUITS DIVISION
CPC1018N
Absolute Maximum Ratings @ 25ºC Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1
Ratings 60 5 50 1 70 400 1500 -40 to +85 -40 to +125
Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied.
Units VP V mA A mW mW Vrms °C °C
Typical values are characteristic of the device at +25°C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements.
Derate linearly 3.33 mW / ºC
Electrical Characteristics @ 25ºC Parameter Output Characteristics Load Current Continuous 1 Peak On-Resistance2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate 3 Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Capacitance, Input to Output 1 2 3
2
Conditions
Symbol
Min
Typ
Max
Units
IF=2mA t =10ms IL=100mA VL=60VP
IL ILPK RON ILEAK
-
0.58 -
600 ±1 0.8 1
mArms / mADC AP
IF=0mA, VL=50V, f=1MHz
ton toff COUT
-
0.47 0.22 25
3 2 -
IL=600mA IF=5mA VR=5V
IF IF VF IR
0.1 0.9 -
0.2 0.2 1.2 -
1 1.4 10
mA mA V µA
VIO=0V, f=1MHz
CIO
-
1
-
pF
IF=5mA, VL=10V
µA
ms pF
Load current derates linearly from 600mA @ 25oC to 480mA @80oC. Measurement taken within 1 second of on-time. For applications requiring high temperature operation (greater than 60oC) a minimum LED drive current of 3mA is recommended.
www.ixysic.com
R12
INTEGRATED CIRCUITS DIVISION
CPC1018N
PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted)*
15 10 5
30
20
25
15 10 5
1.250
1.255 1.260 1.265 1.270 LED Forward Voltage (V)
15 10
0 0.35
1.275
0.40
0.45 0.50 0.55 0.60 Turn-On Time (ms)
0.65
0.55
25
20
20
20
10 5
Device Count (N)
25
Device Count (N)
25
15
15 10 5
0.16
0.18
0.20 0.22 0.24 LED Current (mA)
0.26
1.05
15 10 5 0
0
0
0.65 0.75 0.85 0.95 Turn-Off Time (ms)
Typical On-Resistance Distribution (N=50, IF=1mA, IL=0.6A)
Typical IF for Switch Dropout (N=50, IL=600mA)
Typical IF for Switch Operation (N=50, IL=600mA)
20
5
0
0
Device Count (N)
25
Device Count (N)
20
Device Count (N)
Device Count (N)
25
Typical Turn-Off Time (N=50, IF=5mA, IL=100mA)
Typical Turn-On Time (N=50, IF=5mA, IL=100mA)
Typical LED Forward Voltage Drop (N=50, IF=5mA)
0.16
0.28
0.18
0.20 0.22 0.24 LED Current (mA)
0.505 0.510 0.515 0.520 0.525 0.530 0.535 On-Resistance (:)
0.26
Typical Blocking Voltage Distribution (N=50) 35
Device Count (N)
30 25 20 15 10 5 0 63.5
10 0 1.10 1.15 1.20 1.25 1.30 1.35 1.40 1.45 1.50 1.55 LED Forward Voltage(V)
66.5
2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0
Typical Turn-Off Time vs. LED Forward Current (IL=80mA)
0.7 0.6 Turn-Off Time (ms)
20
Turn-On Time (ms)
LED Forward Current (mA)
50
30
64.5 65.0 65.5 66.0 Blocking Voltage (VP)
Typical Turn-On Time vs. LED Forward Current (IL=80mA)
LED Forward Voltage vs. Current
40
64.0
0.5 0.4 0.3 0.2 0.1 0
0
5
10
15
20
25
30
35
40
LED Forward Current (mA)
45
50
0
5
10 15 20 25 30 35 40 LED Forward Current (mA)
45
50
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R12
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
CPC1018N
PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted)*
1.4 1.3 1.2 IF=5mA IF=2mA IF=1mA
1.0
Load Current (mA)
600
0
20 40 60 Temperature (ºC)
80
Typical IF for Switch Operation vs. Temperature (IL=480mA)
-20
0
20 40 60 Temperature (ºC)
80
100
400
0 -200 -400 -600 -0.3
0.016
20
40
60
80
100
-0.2
-0.1 0 0.1 Load Voltage (V)
0.2
0.012 0.010 0.008 0.006 0.004 0.002 -20
0
20 40 60 Temperature (ºC)
80
100
20
40
60
80
100
Typical On-Resistance vs. Temperature (IL=480mA) 0.9 IF=5mA
0.8
IF=10mA
0.7 Steady State 0.6 0.5 0.4 0.3
-20
0
20 40 60 Temperature (ºC)
80
-40
100
-20
0
20
40
60
80
100
Temperature (ºC)
Typical Blocking Voltage vs. Temperature 72 70
0.70 0.65 0.60 0.55
IF=10mA
0.50 0.45
IF=5mA
68 66 64 62 60 58
-40
200
0
Typical IF for Switch Dropout vs. Temperature (IL=480mA)
0.75
Typical Leakage vs. Temperature Measured Across Pins 3&4 (VL=60V)
IF=10mA -20
Temperature (ºC)
0.80
0.3
IF=5mA
Temperature (ºC)
0.35
Output Capacitance (pF)
Leakage (µA)
0
0.40
0.014
0 -40
0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.22 0.20 0.18 0.16 -40
-20
0.60 0.55 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 -40
Typical Maximum Load Current vs. Temperature
Typical Load Current vs. Load Voltage (IF=1mA)
200
IF=10mA -40
100
Load Current (A)
LED Current (mA)
0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.22 0.20 0.18 0.16 -40
-20
LED Current (mA)
-40
IF=5mA
-20
0
20
40
60
80
100
-40
120
-20
0
20
40
60
Temperature (ºC)
Temperature (ºC)
Output Capacitance vs. Load Voltage (IF=0mA, f=1MHz)
Energy Rating Curve (IF=1mA)
Load Current (A)
1.1
Turn-Off Time (ms)
1.5
2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0
Blocking Voltage (VP)
IF=50mA IF=20mA IF=10mA
Turn-On Time (ms)
LED Forward Voltage (V)
1.6
Typical Turn-Off Time vs. Temperature (IL=80mA)
Typical Turn-On Time vs. Temperature (IL=80mA)
On-Resistance (:)
Typical LED Forward Voltage Drop vs. Temperature
150
100
50
0 0
10
20 30 Load Voltage (V)
40
50
2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 10μs 100μs 1ms 10ms 100ms
1s
80
100
10s 100s
Time
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department.
4
www.ixysic.com
R12
INTEGRATED CIRCUITS DIVISION
CPC1018N
Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device
Moisture Sensitivity Level (MSL) Rating
CPC1018N
MSL 3
ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Soldering Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device
Maximum Temperature x Time
Maximum Reflow Cycles
CPC1018N
260ºC for 30 seconds
3
Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used.
R12
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
CPC1018N
MECHANICAL DIMENSIONS CPC1018N 4.089 ± 0.203 (0.161 ± 0.008)
Recommended PCB Land Pattern 0.200 ± 0.025 (0.008 ± 0.001)
0.60 (0.0217)
6.096 ± 0.102 (0.240 ± 0.004)
3.810 ± 0.076 (0.150 ± 0.003)
0.432 ± 0.127 (0.017 ± 0.005)
5.60 (0.2205)
1.02 ± 0.025 (0.040 ± 0.001)
Pin 1 2.54 Typ (0.100 Typ)
1.30 (0.0512)
2.184 Max (0.086 Max)
2.54 (0.10) Pin to package standoff: 0.0637 ± 0.0383 (0.0025 ± 0.0015)
0.762 ± 0.102 (0.030 ± 0.004)
Dimensions mm (inches)
0.381 TYP. (0.015 TYP.)
CPC1018NTR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max)
W=12.00 (0.472)
B0=4.70 (0.185)
K0=2.70 (0.106) K1=2.30 (0.091)
P=8.00 (0.315)
A0=6.50 (0.256)
User Direction of Feed Dimensions mm (inches)
Embossed Carrier
Embossment
NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted
For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1018N-R12 ©Copyright 2014, IXYS Integrated Circuits Division OptoMOS® is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 9/29/2014
6
