Transcript
CPCI-USB-5 CPCI USB 2.0 Interface with 6 USB Ports -
5x USB 2.0 Hi-Speed via front panel 1x USB 2.0 Hi-Speed via on-board connector sequentially powering up USB ports 1x CompactFlash card slot on-board (option) 1x SD card slot on-board (option)
CompactPCI and USB The CPCI-USB-5 is a CompactPCI board in 3U format. It is equipped with a NEC µPD720101, a USB 2.0 host controller that supports 5 Hi-Speed USB 2.0 interfaces. One of them is multiplied by an on-board HUB. The 5 external USB 2.0 interfaces are accessible via USB connectors (type A, female) in the front panel. The internal USB 2.0 interface is accessible via a 5-pin DUBOX connector located on the board. Power control and overcurrent protection are ensured for all 6 USB interfaces. The CDC-device reduces the starting current by sequentially powering up the USB ports. Seven user specific LEDs and one LED for the internal medium/device are located in the front panel.
CPCI-USB-5-CF/SD
Software Support The CPCI-USB-5 runs with standard drivers of the common operating systems.
Optional CompactFlash and SD Card Interface Optionally, the CPCI-USB-5-CF/SD is additionally available with an on-board CompactFlash card slot and a SD memory card slot.
CompactPCI Connector
NEC µPD 720101
USB 2.0 Hub CDC
Power Control and Overcurrent Protection
USB Port 4, (Type A) X910
Power Control and Overcurrent Protection
USB Port 3, (Type A) X900
Power Control and Overcurrent Protection
USB Port 2, (Type A) X810
Power Control and Overcurrent Protection
USB Port 1, (Type A) X800
Power Control and Overcurrent Protection
USB Port 5, (Type A) X1000 Internal USB Port 8, DUBOX X800
Power Control and Overcurrent Protection
System Health Controller
External USB
8x LED
ADC 5V
Storage Device Control
3.3 V
IDE
Option
Technical Specifications: CompactPCI Bus: Interface: Controller:
'Universal Board', 3.3 V (5 V tolerant)
Interface:
5x USB 2.0, Hi-Speed via front panel, 1x USB 2.0 Hi-Speed via on-board connector NEC µPD720101 USB 2.0 Host Controller, up to 480 Mbit/s
CompactFlash and SD Memory Option (I.2326.02 only): CompactFlash: according to CompactFlashTM specification, type I CompactFlash card holder, ‘True IDE’ mode only, 3.3 V power supply SD Card:
SD Memory Card
IDECompactFlash Slot
CompactFlashCard Type I
General:
PCI bus according to PCI Local Bus Specification 2.2, 32 bit, 33 MHz NEC µPD720101
PCI Bus Voltage: USB:
Host Controller:
SD Card Connector
Operating temperature: Dimensions:
0...50° C Euro Format (160 mm x 100 mm), with 3 U height, 4 HP width front panel
Connectors: USB External: USB Internal: SD slot: CompactFlash Card: Order information:
5x USB, type-A, female 1x 5-pin DUBOX male socket optional 1x SD card holder on-board optional 1x type I CompactFlash card holder on-board
Designation CPCI-USB-5
SD memory card holder
order no. CPCI USB 2.0 interface I.2326.01 with 5x USB 2.0 via front panel, 1x USB on-board connector
CPCI-USB-5-CF/SD as I.2326.01 but with I.2326.02 1x CompactFlash card slot* and 1x SD memory card slot* on-board * Pluggable storage media are not included in the scope of delivery.
esd electronic system design gmbh Vahrenwalder Str. 207 D-30165 Hannover / Germany
I:\Texte\Doku\DBL\CPCI\Englisch\Blue\CPCI-USB-5_Datasheet_en_11.odt
Phone: +49-511-37298-0 Fax: +49-511-37298-68 E-Mail:
[email protected]
