Preview only show first 10 pages with watermark. For full document please download

Cpeth03 Interface Card Compact Pci 10m / 100m Ethernet

   EMBED

Share

Transcript

CPETH03 Interface card Compact PCI 10M/100M Ethernet interface card(2 ports) ITEMS ■ Outline ＊ Multiple protocol interface intel82551ER ×2 Ethernet Interface 2 ･10Mbps/10BASE-T ･100Mbps/100BASE-TX Connector RJ45×2 Serial I/O CPU uses the built-in SCIF RS-232C Micro DB-9P connector CPU SH7751R RISC processor CPU clock 240MHz Bus clock 80Mhz Compact Flash Standard implement 256MB (Must use DIASYS designated products) PCI interrupt Interrupt input×1 User interface LED (card status indication) ・ RUN ・ ERR LED(communication interface) ×2 ・ SPEED ・ LINK/ACT Push button (For operation) ・ RESET ・ ABORT Bus standard Compact PCI bus R2.1 Envrionmental conditons (Operating) Temperature： 0 ～ 55 ℃ Humidity： 35 ～ 95 % RH (No condensation) (Storage) Temperature： -10 ～ 70 ℃ Humidity： under 80 % RH (No condensation) Power supply DC 3.3V ±5% ＊ 133Mbps Compact PCI bus ＊ IEEE802.3 10BASE-T/100BASE-TX Specification standard ＊ CPU internal type (SH4751R/240MHz) SPECIFICATION Controller Dimensions ×1 174 mmD×128 mmH×20 mmW (3U×1 slot) CGS-N0203-E-01 （2014.03.31) CPETH03 Interface card Compact PCI 10M/100M Ethernet interface card(2 ports) CPETH03 PCI-PCI Bridge block diagram Local PCI (32bit 33MHz) Ethernet Controller RJ45 with pulse transformer Ethernet Controller RJ45 with pulse transformer Compact PCI BUS Flash ROM 2M×8bit Flash ROM 2M×8bit Local BUS CF Socket Type-II 3.3V SDRAM Control FPGA DIP Switch Panel LED’s SDRAM 256MB with ECC System Monitor (WDT) Please read the attached instruction manual carefully before use. Reproduction of this manual’s contents in whole or in part without permission is prohibited. Please note the product introductions in this manual may be different from the real products due to product improvements etc. CGS-N0203-E-01 （2014.03.31)