Preview only show first 10 pages with watermark. For full document please download

Cpu Holder (9a481 Arm Above)

   EMBED

Share

Transcript

62XX-501-30 9A481001 Installation Instructions INS-9A481001 (Rev.B) Tools required: Phillips head screwdriver 3/32 Allen Wrench 1 Parts Included: (1) Vesa Mounting Bracket (1) Mounting Plate (2) #8-32 x 3/8” Long Phillips Drive Pan Head Machine Screws To install mounting plate onto the Flat Screen Monitor Arm, remove screw from behind top cap. Remove cap and slide off collar (see Fig. A.) 2 If the Mounting Plate (Fig. E) needs to be adjusted up or down, use a 3/32 allen wrench to loosen set screw. Find position and tighten with allen wrench. Slide mounting plate onto arm channel. Slide collar back on and refasten cap with screw (see Fig B). Fig. A Fig. C Fig. B Midmark Corporation | 60 Vista Drive | PO Box 286 | Versailles, Ohio 45380-0286 | USA | midmark.com 62XX-501-30 9A481001 Installation Instructions INS-9A481001 (Rev.B) Tools required: Phillips head screwdriver 3/32 Allen Wrench 3 Parts Included: (1) Vesa Mounting Bracket (1) Mounting Plate (2) #8-32 x 3/8” Long Phillips Drive Pan Head Machine Scres Attach Vesa Bracket (Fig. C) securely to Technology Component. Using four screws (not included). To ensure brackets are secure, tighten included (2) two screws to fasten plate to vesa mounting bracket (Fig. D) Fig. C Fig. D Midmark Corporation | 60 Vista Drive | PO Box 286 | Versailles, Ohio 45380-0286 | USA | midmark.com