Transcript
Creusen Professional Grinders
8000
For the professional user there is the Creusen Professional line. These machines combine power with an extensive range of applications. These robust machines are extremely suitable for intensive use in maintenance workshops, construction firms and schools.
8000.12
Creusen Professional
8000
For the professional user there is the Creusen Professional line. These machines combine power with an extensive range of applications. The robust construction of these machines makes them extremely suitable for intensive use in maintenance workshops, construction firms and schools.
The machines are constructed in accordance with international standards and regulations, which means that the products carry a CE quality mark and a GS certificate.
Most Creusen Professional models are available both in single-phase and in three-phase versions. Other voltages and versions can be supplied on request. All our grinding and polishing machines are supplied as standard without a pedestal.
8000.13
Creusen Professional Double Grinders
8000
The double grinding machines (DS) are very suitable for the professional who sets high requirements. Thanks to its high power rating and extensive range of accessories, this versatile grinding machine has a multitude of uses.
DS 8200T
Key to codes
DS
double grinder
8150 series 8000 / ø 150 mm 8200 series 8000 / ø 200 mm K
pedestal
AK
extraction pedestal
T
table model
S
special, aluminium oxide wheel
8000.14
Creusen Professional Double Grinders
DS 8150T Voltage: 230V 1~ 50-60 Hz Power: 500 W Speed: 2800-3400 rpm Grinding wheel d1 x b x d2: 150 x 20 x 15 mm
DS 8150T Voltage: 400V 3~ 50-60 Hz Power: 600 W Speed: 2800-3400 rpm Grinding wheel d1 x b x d2: 150 x 20 x 15 mm
DS 8200T Voltage: 230V 1~ 50-60 Hz Power: 800 W Speed: 2800-3400 rpm Grinding wheel d1 x b x d2: 200 x 25 x 15 mm
DS 8200T Voltage: 400V 3~ 50-60 Hz Power: 850 W Speed: 2800-3400 rpm Grinding wheel d1 x b x d2: 200 x 25 x 15 mm
8000.15
1~
art. 004004
DS 8150TS
8000
1~
UK version art. 004015
Voltage: 230V 1~ 50-60 Hz art. 004125 Power: 500 W Speed: 2800-3400 rpm Grinding wheel d1 x b x d2: 150 x 40 x 15 / 150 x 20 x 15 mm UK version art. 004136
3~
DS 8150TS
art. 004037
3~
Voltage: 400V 3~ 50-60 Hz art. 004147 Power: 600 W Speed: 2800-3400 rpm Grinding wheel d1 x b x d2: 150 x 40 x 15 mm / 150 x 20 x 15 mm
1~
art. 004158
UK version art. 004169
3~
art. 004191
DS 8200T/AK 8000 DS 8200T, with protective covers and dust extractor art. 004290 connection ø 50 mm, mounted on AK 8000 in 1-phase version AK 8000, stable steelplate pedestal with integrated dust extraction, with easy-to-change heat resistant filter in collector tray Only available in this combination UK version art. 004279
Creusen Professional Double Grinders
8000
Features • Dutch quality product • high power
500 - 850 Watt • low-vibration • low noise level • high operating reliability • available in 1~ and 3~ • versatile, thanks to wide range of accessories • 5 year warranty
Dutch quality product
Thermal overload protection
Switch with no-volt release and emergency stop
Grinding wheels optimally accessible
Tiltable polycarbonate eye shields
Stable grinding supports, fixed on both sides of guards
DS 8200T on pedestal K 8000
Steel-wire brush can be fitted inside the wheel guard
Hand dresser for roughening, correcting and cleaning the grinding wheel
Conical spindle on shaft-end
Extension shaft 8200, distance between flanges 20 mm
Extension shaft 8150, distance between flanges 23 mm
Extension shaft with morse taper MK3 for right-hand and left-hand side
5 year warranty
8000.16
Creusen Professional Double Grinders
8000
E
C
B
ø 6,5 (4x)
A
104
D
F G Type
A
B
C
D
E
F
G
DS 8150T
172
400
245
300
126
145
195
DS 8150TS
172
415
245
300
126 -
145
195
DS 8200T
192
463
280
330
126
145
250
Type DS 8150T DS 8150T DS 8150TS DS 8150TS DS 8200T DS 8200T 1~ 3~ 1~ 3~ 1~ 3~ Voltage (V) 230 400 230 400 230 400 1~ 3~ 1~ 3~ 1~ 3~ Frequency (Hz) 50-60 50-60 50-60 50-60 50-60 50-60 Power (W) 500 600 500 600 800 850 Speed (rpm) 2800-3400 2800-3400 2800-3400 2800-3400 2800-3400 2800-3400 Peripherical speed (m/s) 22-26 22-26 22-26 22-26 30-36 30-36 Grinding wheel d1 x b x d2 (mm) 150 x 20 x 15 150 x 20 x 15 150 x 40 x 15 150 x 40 x 15 200 x 25 x 15 200 x 25 x 15 Grinding wheel right d1 x b x d2 (mm) 150 x 20 x 15 150 x 20 x 15 Grit 36/80 36/80 100/80 100/80 36/80 36/80 Noise level dB (A) 45 45 45 45 50 50 Weight (kg) 10 10 11 11 17 17 Article number * 004004 004037 004125 004147 004158 004191 UK version article number 004015 004136 004169
* Other versions on request
Key to codes DS double grinder 8150 series 8000 / ø 150 mm 8200 series 8000 / ø 200 mm K
pedestal
AK
extraction pedestal
T
table model
S
special, aluminium oxide wheel
8000.17
DS 8200T/ AK 8000 1~ see page 8000.28
230 1~ 50-60 800 2800-3400 30-36 200 x 25 x 15 36/80 50 17 004290 004279
Creusen Professional Belt Grinder/Grinder
8000
The belt grinding/grinding machine (BSS) enables surface grinding and contact grinding on the belt to be combined with conventional grinding on the grinding wheel.
BSS 8200
Key to codes
BSS belt grinder / grinder 8200 series 8000 / ø 200 mm K
pedestal
8000.18
Creusen Professional Belt Grinder/Grinder
8000
Pictured with BSS 8200
BSS 8200
art. 004334
BSS 8200
3~
Voltage: 400V 3~ 50-60 Hz Power: 850 W Speed: 2800-3400 rpm Grinding wheel right d1 x b x d2: 200 x 25 x 15 mm
8000.19
K 8000
1~
Voltage: 230V 1~ 50-60 Hz Power: 800 W Speed: 2800-3400 rpm Grinding wheel right d1 x b x d2: 200 x 25 x 15 mm
art. 007183
UK version art. 004340
art. 004345
• • •
Height 85 cm
pedestal
Steelplate (2.5 mm) Machines are supplied as standard without
Creusen Professional Belt Grinder/Grinder
8000
Features • Dutch quality product • available in 1~ and 3~ • high operating reliability • perfectly balanced
to ensure minimum noise • low-vibration running • versatile, thanks to a wide range of accessories • constructed in accordance with international standards and regulations • 5 year warranty
BSS 8200 on pedestal K 8000
Dutch quality product
Thermal overload protection
Switch with no-volt release and emergency stop
Belt grinder side adjustable in height
Easy-to-change abrasive belt
Range of belts available
With graphite strip for belt guiding
Belt adjustment facility
Fitted with vulcanised contact wheel with grooves
Aluminium belt-tension roll
Tiltable polycarbonate eye shields
Stable grinding supports fixed on both sides, manually adjustable
8000.20
Creusen Professional Belt Grinder/Grinder
8000
Features
8000.21
Steel-wire brush fits safely inside the wheel guard
Hand dresser for roughening, correcting and cleaning the grinding wheel
Extension shaft available in combination with polishing cover ø 200 mm. Distance between flanges 20 mm
Conical spindle on shaft-end
Extension shaft with morse taper MK3 for right-hand and left-hand side
5 year warranty
Creusen Professional Belt Grinder/Grinder
8000
435
B
D
0˚
0 -9
ø 6,5 (4x) 104 E
A C
Type
BSS 8200 1~
BSS 8200 3~
Voltage (V) Frequency (Hz) Power (W) Speed (rpm) Peripherical speed (m/s) Belt l x w (mm) Grit Contact wheel l x w (mm) Grinding wheel right d1 x b x d2 (mm) Grit Noise level dB (A) Weight (kg) Article number * UK version article number
230 1~ 50-60 800 2800-3400 30-36 1000 x 50 80 150 x 50 200 x 25 x 15 80 72 20 004334 004340
400 3~ 50-60 850 2800-3400 30-36 1000 x 50 80 150 x 50 200 x 25 x 15 80 72 20 004345
Type
A
B
C
D
E
BSS 8200
192
460
331
126
145
* Other versions on request
Key to codes BSS belt grinder / grinder 8200 series 8000 / ø 200 mm K
pedestal
8000.22
Creusen Professional
8000.23
8000
Creusen Professional Double Polishing Machines
8000
The double polishing machines (DPC) are available in two versions, for polishing wheels with a diameter of 150 mm and 200 mm, with various power ratings. Both versions are equipped on both sides with a conical spindle and are fitted with polishing covers for optimum safety.
DPC 8200T
Key to codes
DPC double polishing conical 8150 series 8000 / ø 150 mm 8200 series 8000 / ø 200 mm T
table model
8000.24
Creusen Professional Double Polishing Machines
DPC 8150T Voltage: 230 V 1~ 50-60 Hz Power: 500 W Speed: 2800-3400 rpm Polishing wheel d1 x b x d2: 150 x 20 x 15 mm
DPC 8200T Voltage: 230 V 1~ 50-60 Hz Power: 800 W Speed: 2800-3400 rpm Polishing wheel d1 x b x d2: 200 x 20 x 10 mm
8000.25
1~
art. 004103
UK version art. 004114
1~
art. 004257
UK version art. 004268
8000
Creusen Professional Double Polishing Machines
8000
Features • Dutch quality product • available in 1~ phase • high power • high operating reliability • versatile, thanks to wide
range of accessories • constructed in accordance with international standards and regulations • 5 year warranty
Pedestal K 8000
Dutch quality product
Thermal overload protection
Switch with no-volt release and emergency stop
Conical spindles on shaft-end
Polishing wheels in ø 150 mm or ø 200 mm are suitable for fitting to the conical spindle
Polishing covers in ø 150 mm or ø 200 mm ensure safety during polishing
Polishing
5 year warranty
8000.26
Creusen Professional Double Polishing Machines
8000
D
C
B
ø 6,5 (4x)
A
104 E F
Type
DPC 8150T 1~
DPC 8200T 1~
Voltage (V) Frequency (Hz) Power (W) Speed (rpm) Peripherical speed (m/s) Polishing wheel d1 x b x d2 (mm) (not standard) Noise level dB (A) Weight (kg) Article number * UK version article number
230 1~ 50-60 500 2800-3400 22-26 150 x 20 x 15
230 1~ 50-60 800 2800-3400 30-36 200 x 20 x 10
45 11 004103 004114
50 15 004257 004268
* Other versions on request
Key to codes DPC double polishing conical 8150 series 8000 / ø 150 mm 8200 series 8000 / ø 200 mm T
table model
8000.27
Type
A
B
C
D
E
F
DPC 8150T
172
591
210
126
145
194
DPC 8200T
192
640
240
126
145
222
Creusen Professional Pedestals
7
104
8000
850
A B
DS 8200T on pedestal AK 8000 Stable steelplate pedestal with integrated dust extraction, with easyto-change heat resistant filter in collector tray Only available in this combination
350
390
10.5 (4x)
290
330
Type
A
8150
172
-
8200
-
192
Type
AK 8000 1~
Extraction motor Voltage (V) Frequency (Hz) Power (W) Speed (rpm) Capacity m3/h Hose connection (mm) Height Dimensions upper plate (mm) Dimensions bottom plate (mm) Noise level dB (A) Weight (kg) Filter Article number UK version
N252 230 1~ 50-60 100 2800-3400 450 2 x ø 50 850 256 x 162 330 x 390 70 40 200 x 200 004290 * 004279
Pedestal K 8000
B
Tool tray with water cup
K 8000
850 256 x 162 330 x 390 20 200 x 200 007183
* only in combination with DS 8200T
Key to codes K
pedestal
AK
extraction pedestal
8000.28
Creusen Professional Accessories
Extension shaft M12 left DS 8150T distance between flanges 23 mm art. 900405
Extension shaft M12 right DS 8150T distance between flanges 23 mm art. 900394
Extension shaft available in combination with polishing cover ø 150 mm or ø 200 mm
8000.29
8000
Extension shaft M12 left DS 8200T distance between flanges 20 mm art. 900427
Extension shaft M12 right DS 8200T distance between flanges 20 mm art. 900416
Extension shaft with morse taper MK3 for right-hand and left-hand side art. 900438
Extension shaft with morse taper MK3 in combination with polishing cover ø 150 mm or ø 200 mm
Tapered polishing spindle left art. 900152
Tapered polishing spindle right art. 900163
Conical spindle in combination with polishing cover ø 150 mm or ø 200 mm
Polishing mop linen ø 150 x 20 x 15 mm art. 700513
Polishing mop flannel ø 150 x 20 x 15 mm art. 700524
Polishing mop linen ø 200 x 20 x 10 mm art. 700810
Polishing paste universal art. 900240
Polishing cover ø 150 mm for right-hand and left-hand side per piece art. 200574
Polishing cover ø 200 mm for right-hand and left-hand side per piece art. 200563
Polishing mop flannel ø 200 x 20 x 10 mm art. 700821
Creusen Professional Accessories
8000
Polishing set ø 150 mm right art. 900245
Polishing set ø 200 mm right art. 900250
Polishing
Steel-wire brush ø 150 x 18 x 15 mm with flange and spacers art. 900449
Steel-wire brush ø 200 x 22 x 15 mm with flange and spacers art. 900460
Belts with straight tape joint packed per 10 pieces
Belt 1000 x 50 mm, grit 40, BSS 8200 art. 700909
Belt 1000 x 50 mm, grit 80, BSS 8200 art. 700931
Hand dresser, 150 x 25 x 15 mm art. 900284 125 x 25 x 15 mm art. 900251
Grinding wheel normal corundum, ø 150 x 20 x 15 mm, grit 36, art. 700117
Grinding wheel normal corundum, ø 150 x 20 x 15 mm, grit 80 art. 700128
Grinding wheel aluminium oxide ø 150 x 20 x 15 mm, grit 100 art. 700392
Cup grinding wheel aluminium oxide ø 150 x 40 x 15 mm, grit 100 art. 700139
Cup grinding wheel aluminium oxide ø 150 x 40 x 15 mm, grit 60 art. 700348
Grinding wheel silicium carbide ø 150 x 20 x 15 mm, grit 120 for hard metal art. 700359
8000.30
Creusen Professional Accessories
8000
Grinding wheel normal corundum, ø 200 x 25 x 15 mm, grit 36 art. 700172
Grinding wheel normal corundum, ø 200 x 25 x 15 mm, grit 80 art. 700183
Grinding wheel aluminium oxide ø 200 x 25 x 15 mm, grit 60, white art. 700216
Grinding wheel silicium carbide, ø 200 x 25 x 15 mm, grit 120 for hard metal art. 700381
Wall console pro-support 270 x 220 x 180 mm art. 900317
Pedestal K 8000 art. 007183
Tool tray and water cup art. 370128
Water cup for tool tray art. 900889
8000.31
Creusen Professional Parts
8000
Switch with no-volt release and emergency power cut off art. 449042
Emergency power cut off button art. 251889
Switch 1-phase black (former model) art. 440011
Switch 3-phase white (former model) art. 440308
Contact wheel BSS 8200 ø 150 x 50 x 15 mm art. 900548
Aluminium belt tension roll BSS 8200 art. 900592
Graphite strip BSS 8200 55 x 230 mm art. 571417
Grinding support left with nut BSS 8200 art. 1350020
Grinding support DS 8150T per 2 pieces art. 1330098
Grinding support DS 8150TS per 2 pieces art. 1330087
Grinding support DS 8200T per 2 pieces art. 1330076
Eye shield universal polycarbonate per 2 pieces art. 900009
Eye shield with spark arrestor DS 8150T per 2 pieces art. 900900
Eye shield with spark arrestor DS 8150TS per 2 pieces art. 900911
Eye shield with spark arrestor DS 8200T per 2 pieces art. 900922
Eye shield bracket per piece (former model) art. 200310
Wheel guard with cover DS 8150T left art. 1330010
Wheel guard with cover DS 8150T and TS right art. 1330021
Wheel guard with cover DS 8150TS left art. 1330032
8000.32
Creusen Professional Parts
8000.33
8000
Wheel guard with cover DS 8200T left art. 1330054
Wheel guard with cover DS 8200T right art. 1330065
Capacitors 5uf DS 8150T/TS art. 460031 8uf DS 8200T art. 460053 12uf BSS 8200 art. 460119
Buffer per 4 pieces art. 560175
Flange DS 8150T 50/15.1 x 4 mm art. 200420
Flange DS 8150T 50/12.1 x 4 mm art. 200409
Flange DS 8200T 70/15.1 x 6 mm art. 200442
Flange DS 8200T 70/12.1 x 6 mm art. 200453
Spacer 20/15 x 34 mm for BSS 8200 art. 280511
Spacer 20/15 x 10 mm for DS 8150T/TS art. 280148
Spacer 20/15 x 15 mm for DS8200 art. 280115
Spacer 20/15 x 8 mm for accessories art. 280104
Nut M12 left art. 668558
Nut M12 right art. 668437
Extractor motor N252 for pedestal AK 8000 art. 780043
PVC hose for pedestal AK 8000 per piece art. 251856
Filter AK 8000 200 x 200 mm art. 900724
