Transcript
RESISTANCE MEASURING INSTRUMENTS
D07E RUGGED DIGITAL MICRO OHMMETER FOR LOW RESISTANCE MEASUREMENT
The DO7e is a very rugged yet compact and portable digital
key feature
micro ohmmeter for the measurement of low resistance. Using a
True 4 wire measurement eliminates lead resistance
■
6 push button ranges 6 milli ohm to 600 ohm
■
rechargeable sealed lead acid battery with built-in charger,
DO7E
Resolution 1 micro ohm on 6 milli ohm range
■
the DO7e is capable of measuring with a current of 10 Amps on
Auto ranging
■
the lowest range. The DO7e has been designed with the latest
10 Amp measuring current on lowest range
■
0.8'' LED Display daylight viewable
■
solid state and microprocessor techniques to ensure the very
Input protection up to 415 Volts rms
■
best in measurement, reliability and features. Automatic range
Forward and reverse current measurement
■
selection, forward and reverse current measurements with auto
Auto average of forward and reverse measurement
■
Auto power off
■
Mains / rechargeable battery operation
■
Digital calibration pass code protected
■
average and a remote start socket are all included as well as an energy saving power down mode.
Bracken Hill, South West Industrial Estate, Peterlee, County Durham, SR8 2SW United Kingdom Tel: +44 (0) 191 586 3511 Fax: +44 (0) 191 586 0227 Email:
[email protected] Web: www.cropico.com
D07E SPECIFICATIONS Range
Resolution
Typical Current
Accuracy at 20°C ±5°C, 1 Year
Temp Coefficient/°C
600Ω
100mΩ
1mA
±(0.25% Rdg +0.05% FS)
40ppm Rdg + 30ppm FS
60Ω
10mΩ
10mA
±(0.25% Rdg +0.05% FS)
40ppm Rdg + 30ppm FS
6Ω
1mΩ
100mA
±(0.25% Rdg +0.05% FS)
40ppm Rdg + 30ppm FS
600mΩ
100µΩ
1A
±(0.25% Rdg +0.05% FS)
40ppm Rdg + 30ppm FS
60mΩ
10µΩ
1A
±(0.25% Rdg +0.05% FS)
40ppm Rdg + 30ppm FS
6mΩ
1µΩ
10A
±(0.25% Rdg +0.05% FS)
40ppm Rdg + 250ppm FS
Measurement
Dimensions
4 Terminal Kelvin / Thomson principle eliminates errors due to lead resistance. Open circuit measurement voltage = 2V dc
343mm x 327mm x 152mm (W D H) approx Mass
Display
6kg approx
0.8” LED 6000 count with automatic decimal point and polarity indication
Protection 415 Vrms maximum at input terminals
Ranges Calibration
6 push button selected with LED indication
Digital Pass code protected Terminals Binding posts accept 4mm spade tags, 6mm bare wires and 4mm banana plugs (4mm safety sockets) Working Temperature
Battery Sealed lead acid battery with built-in charger. Greater than 1000 measurements on lowest (10A range) and 20 hours on other ranges from a fully charged battery
0°C to 40°C rel. humidity 80% max. non-condensing Average Storage Temperature
Automatic average and display of measurement with forward and reverse current
-20 to +50°C Mains Supply 115/230 Volts +10%-10% 47 to 63Hz 20VA Safety EN 61010-1 EMC - EN 61236
D07e Options
Code
Item
CB03
Lead bag attaches to lid of DO7e must be ordered with DO7e
D07-RS
Remote start plug
FS01
Remote start foot switch
HS01
Duplex handspikes with 3 metre lead length
HS01-RS
Duplex handspikes with 3 metre lead length with remote start button suitable for DO7 and DO7e
HS02
Duplex handspikes with 3 and 15 metre lead length
HS02-RS
Duplex handspikes with 3 and 15 metre lead length with remote start button
LS03
Lead set with 3 metre leads terminated in large Kelvin clips type KC3
LS04
Lead set with 3 metres and 15 metres lead length terminated in large Kelvin clips type KC3
MTS2
Calibration standard
Seaward test and measurement companies include:
SEAWARD CLARE CROPICO RIGEL SEAWARD G R O U P INDUSTRIAL SAFETY INSTRUMENTS
PRECISION INSTRUMENTS
MEDICAL
PORTABLE ELECTRICAL SAFETY INSTRUMENTS
