Cruiser 10

Transcript

Cruiser 10 Convaid Replacement Parts & Accessories Manual TABLE OF CONTENTS Cruiser 10 Cruiser 10 HEAD SUPPORT REPLACEMENT PARTS FRAME Part# 991388 One Piece Height Adjustable Push Handle··················································································· 2 995914 One Piece Height Adjustable Push Handle with Attendant Handbrake·············································· 4 FOOTPLATES Part# 995927 Headrest Extension - Curved Cordura························································································ 62 995928 Headrest Extension - Rectangular Textilene················································································ 62 995932 Occi Headwings ····················································································································· 64 995933 Padded Headwings·················································································································· 64 TRUNK POSITIONING Part# 996610 H-Harness with Padded Cover ································································································· 66 995925 Full Torso Support Vest for Cordura Upholstery ·········································································· 68 992658 Standard Footplate - Left ········································································································· 6 995926 Full Torso Support Vest for Textilene Upholstery ········································································· 68 992659 Standard Footplate - Right········································································································ 8 996636 Reducer Seat Insert ··············································································································· 68 994757 Angle Adjustable Footplate - Left······························································································ 10 995935 Soft Adjustable Lateral Support - Single Flap·············································································· 70 994758 Angle Adjustable Footplate - Right ··························································································· 12 995936 Soft Adjustable Lateral Support - Double Flap············································································· 70 996010 Standard Footplate Assy Kit - Left····························································································· 14 995938 Upper Extremity Support Surface Tray (Hardware Included)························································· 72 996011 Standard Footplate Assy Kit - Right··························································································· 16 996012 Angle Adjustable Swing Away Footplate Assy Kit - Left································································· 18 996013 Angle Adjustable Swing Away Footplate Assy Kit - Right ······························································ 20 Part# PELVIC POSITIONING Part# 995683 3 Point Belt with Depth Adjustable Crotch Strap·········································································· 74 994716 Adjustable Crotch Strap for 3 Point Belt ···················································································· 74 7.5" x 2" Front Solid Wheel Assy - Each····················································································· 22 995919 Support Seat Cushion Assy······································································································ 76 994750 7.5" x 2" Front Pneumatic Wheel Assy - Each············································································· 24 995920 Align Seat Cushion Assy·········································································································· 78 996009 Caster Fork Assy for 7.5" x 2" Front Rolko Tire - Each································································· 26 995921 Position Seat Cushion Assy······································································································ 80 995690 Caster Fork Assy with Caster Lock for 7.5" x 2" Front Rolko Tire - Pair ·········································· 28 995929 Lateral Thigh Support - Adductor······························································································ 82 994746 11.5" x 2.5" Rear Solid Wheel Assy - Each················································································· 30 995930 Medial Thigh Support - Abductor······························································································· 82 994747 12.5" x 2" Rear Solid Knobby Wheel Assy - Each ········································································ 32 996638 Q'Straint Transit Lap Belt········································································································· 84 994748 12.5" x 2" Rear Pneumatic Knobby Wheel Assy - Each ································································ 34 996639 Sure-Lok Transit Lap Belt········································································································· 84 996005 Brake Assy for Rolko Wheel - Left····························································································· 36 996006 Brake Assy for Rolko Wheel - Right ·························································································· 38 996007 Brake Assy for Rolko Attendant Brake - Left··············································································· 40 996008 Brake Assy for Rolko Attendant Brake - Right············································································· 42 WHEELS Part# 994749 UPHOLSTERY Upholstery Colors································································································································44 ii Part# 991316 Cordura Seat Bottom Upholstery ····························································································· 46 991396 Cordura Back Upholstery ········································································································ 46 991318 Heavy Duty Cordura Seat Bottom Upholstery············································································· 48 991397 Heavy Duty Cordura Back Upholstery························································································ 48 991394 Textilene Seat Bottom Upholstery ···························································································· 50 991398 Textilene Back Upholstery ······································································································· 50 991395 Heavy Duty Textilene Seat Bottom Upholstery ··········································································· 52 991399 Heavy Duty Textilene Back Upholstery ······················································································ 52 995915 Cordura Upholstery with +3" Seat Depth Extension····································································· 54 995916 Heavy Duty Cordura Upholstery with +3" Seat Depth Extension···················································· 56 995917 Textilene Upholstery with +3" Seat Depth Extension ··································································· 58 995918 Heavy Duty Textilene Upholstery with +3" Seat Depth Extension ·················································· 60 www.convaid.com FOOT & LEG POSITIONING Part# 996615 Calf Panel······························································································································ 86 996616 Foot Positioner - Small ··········································································································· 86 996617 Foot Positioner - Medium ········································································································ 86 996618 Foot Positioner - Large ··········································································································· 86 996619 Footplate Securement Strap····································································································· 86 ACCESSORIES Part# 995922 Headrest Cover (Canopy)········································································································ 88 995923 Extended Headrest Cover - No Windows (Canopy)······································································ 88 995924 Extended Headrest Cover - With Windows (Canopy)··································································· 88 996623 Mosquito Net························································································································· 90 996625 Rain Cover ···························································································································· 90 996620 Saddle Bag - Pair···················································································································· 92 996621 Wheelchair Travel Bag············································································································· 94 995937 Under Seat Storage Basket ····································································································· 94 996622 Utility Bag····························································································································· 94 994764 Frame Armrest Cover - Pair······································································································ 96 995688 Rear Anti-Tip Tube - Pair·········································································································· 98 888-Convaid (266-8243) iii www.convaid.com Convaid, the company that invented the compact folding adaptive assisted wheelchair, has helped special needs children and their families live fuller, more productive lives since 1976. Convaid produces high-performance, easy-to-use and attractive mobility products for all stages of a young person’s life, from infancy to young adulthood. Each product is custom-built to individual specifications to provide the optimum comfort, safety, and convenience. Convaid meets the assisted mobility needs of thousands of special needs families every year by manufacturing pediatric push wheelchairs in a variety of sizes and models, and backs its products with one of the best warranties in the industry and a highly responsive customer service department. The patented compact folding mechanism allows custom wheelchairs to be easily carried up stairs, placed in the trunk of most compact cars, or used while traveling. Convaid’s chairs provide the optimal combination of corrective positioning, comfort, durability and safety for the user in a product that is both attractive and easy-to-use for the caregiver. 888-Convaid (266-8243) 1 FRAME FRAME Cruiser 10 One Piece Height Adjustable Push Handle # 991388 INSTRUCTIONS 1 2 3 CX10 Single Pc Handle Assy 1 2 100118 Locknut #10-24 Jam Flexlock 2 3 100333 Screw #10-24 x 1-1/4" Phil Pan 2 1 2 2 One Piece Height Adjustable Push Handle 1. Using a phillips screwdriver and a 3/8” wrench, remove the screw attaching the handle tube assembly from the Cruiser Back Tubes. 1 2. Slide existing handle assembly off. Qty CX10 Single Pc Handle Assembly Locknut #10-24 Jam Flexlock Screw #10-24 x 1-1/4" Phil Pan QTY 506764 3 Item Description DESCRIPTION 1 r 10 One Piece Push Handle Kit Includes Cruiser 10 991388 ITEM PART NUMBER 2 Cruiser Back Tube 991388 ITEM PART NUMBER DESCRIPTION 1 506764 CX10 Single Pc Handle Assy 2 100118 Locknut #10-24 Jam Flexlock 3 100333 Screw #10-24 x 1-1/4" Phil Pan 4. Align the holes on3 the plastic pivot joint of the handle tube assembly with the holes of the back tubes. QTY Assembled Assembled 3. Slide new handle assembly onto the back tube. Item 1 1 5. Insert new screw Item 3 into pivot joint. 2 Cruiser Back Tube 2 6. Attach the nut Item 2 and tighten using a phillips screwdriver Exploded and a 3/8” wrench. 3 1 2 Cruiser CruiserBack BackTube Tube 3 Cruiser Tube Cruiser Back Tube Exploded Close-up 2 www.convaid.com 888-Convaid (266-8243) 3 FRAME Cruiser 10 One Piece Height Adjustable Push Handle with Attendant Handbrake INSTRUCTIONS Cruiser 10 One Piece Height Adjustable Push Handle with Attendant Handbrake # 995914 1. Remove cable from lever by pulling the cable away from the lever & routing the inner cable off the lever. Kit Includes Item Description 1 2 3 CX-10 Attendant Brake Handle Assembly Locknut #10-24 Jam Flexlock Screw #10-24 x 1-1/4" Phil Pan 2. Using a phillips screwdriver and a 3/8” wrench, remove the screw attaching the handle tube assembly from the Cruiser Back Tubes. Qty 1 2 2 3. Slide existing handle assembly off. 4. Slide new handle assembly onto the back tube. Item 1 Assembled 5. Align the holes on the plastic pivot joint of the handle tube assembly with the holes of the back tubes. 6. Insert new screw Item 3 into pivot joint. 7. Attach the nut Item 2 and tighten using a phillips screwdriver and a 3/8” wrench. Attached cable onto the lever on the new handle. 3 1 2 Cruiser Back Tube 3 Cruiser Back Tube Close-up 4 www.convaid.com 888-Convaid (266-8243) 5 FOOTPLATE INSTRUCTIONS Cruiser 10 Standard Footplate - Left 1 504987 DESCRIPTION CX-10 Footrest Assembly, LH # 992658 2 Small Footplate Assembly LH 1 1 504987 1 1 992658 ITEM PART NUMBER Standard Footplate - Left 2. Insert the new footplate assembly into the footplate adjustment tube then press the detent button to allow the footplate assembly to slide in and lock in place. 1 Qty CX-10 Footrest Assembly, LH QTY 1. Remove the exsiting footplate assembly by pressing the detent button then pulling the footplate off. Kit Includes Item Description Cruiser 10 992658 ITEM PART NUMBER Assembled Assembled DESCRIPTION CX-10 Footrest Assembly, LH QTY 1 Exploded 1 Exploded Close-up 6 www.convaid.com 888-Convaid (266-8243) 7 Cruiser 10-12 Small Footplate Assembly RH FOOTPLATE INSTRUCTIONS Cruiser 10 Standard Footplate - Right Standard Footplate - Right # 992659 992659 ITEM PART NUMBER 1 504988 DESCRIPTION 1 2. Insert the new footplate assembly into the footplate adjustment tube then press the detent button to allow the footplate assembly to slide in and lock in place. Kit Includes Item Description QTY 1. Remove the exsiting footplate assembly by pressing the detent button then pulling the footplate off. CX-10 Footrest Assembly, RH 0-12 Small Footplate Assembly RH 1 Cruiser 10 Qty CX-10 Footrest Assembly, RH 1 1 992659 ITEM PART NUMBER 1 504988 DESCRIPTION CX-10 Footrest Assembly, RH Assembled Assembled QTY 1 Exploded 1 Exploded Close-up 8 www.convaid.com 888-Convaid (266-8243) 9 FOOTPLATE Cruiser 10 994757 ITEM PART NUMBER 1 504885 INSTRUCTIONS DESCRIPTION CX-10 Pivot Footplate Assy LH Angle Adjustable Footplate - Left Cruiser 10 QTY 1 Angle Adjustable Footplate - Left gle Adjustable Footplate Assembly LH # 994757 1. Remove the exsiting footplate assembly by pressing the detent button then pulling the footplate off. 2. Insert the new footplate assembly into the footplate adjustment tube then press the detent button to allow the footplate assembly to slide in and lock in place. Kit Includes Item Description Qty Small Footplate Assembly RH 1 CX-10 Pivot Footplate Assembly, LH 1 Assembled Assembled 994757 ITEM PART NUMBER 1 504885 DESCRIPTION QTY 1 CX-10 Pivot Footplate Assy LH Exploded 992659 ITEM PART NUMBER 1 504988 DESCRIPTION CX-10 Footrest Assembly, RH QTY 1 1 Exploded Exploded Close-up 10 www.convaid.com 888-Convaid (266-8243) 11 Cruiser 10-12 Small Angle Adjustable Footplate Assembly LH INSTRUCTIONS Cruiser 10 FOOTPLATE Angle Adjustable Footplate - Right Angle Adjustable Footplate - Right # 994758 994758 ITEM PART NUMBER 1 504486 DESCRIPTION CX-10 Pivot Footplate Assy RH Angle Adjustable Footplate Assembly LH Item Description QTY 1 1. Remove the exsiting footplate assembly by pressing the detent button then pulling the footplate off. 2. Insert the new footplate assembly into the footplate adjustment tube then press the detent button to allow the footplate assembly to slide in and lock in place. Kit Includes 1 Cruiser 10 Qty CX-10 Pivot Footplate Assembly, RH 1 1 994758 ITEM PART NUMBER 1 504486 DESCRIPTION CX-10 Pivot Footplate Assy RH Assembled QTY Assembled 1 Exploded 1 Exploded Close-up 12 www.convaid.com 888-Convaid (266-8243) 13 996010 ITEM PART NUMBER FOOTPLATE Cruiser 10 Standard Footplate Assy Kit - Left # 996010 1 504987 Footplate Adjustment Tube LH 500969 INSTRUCTIONS 500690 Footrest Extens. Housing Assy 2 3 1 2 3 4 5 6 7 100262 Screw 1/4"-20 x 1-1/2" Flat Skt 2 6 503879 Detent Pin With Webbing Assembly 1 7 100690 Thread Locker-Medium-Vibra-tite 1 1. Pull out metal pin and remove the existing footplate extension tube. Item 2 2. Using a 5/32" allen wrench, remove both bolts from the housing bracket on the frame and remove existing footplate assembly components. 1 100017 Tube Connector 7/8" Heavy Duty 1 5 100262 Screw 1/4"-20 x 1-1/2" Flat Skt 2 6 503879 Detent Pin With Webbing Assembly 1 7 100690 Thread Locker-Medium-Vibra-tite 1 6 5 3. If needed, install tube connector Item 4 into the front leg by hammering or pressing it into the front leg tube. 4. Slide the loop portion of the detent pin with webbing assembly over the front x-brace tube. 4 5. Align footrest extension housing Item 3 with the front leg. 1 4 7 2 1 3 Standard Footplate Assy Kit - Left 5 QTY Assembled 1 1 7 Assembled Cruiser 10 1 Tube Connector 7/8" Heavy Duty 6 Qty CX-10 Footrest Assembly, LH 1 Footplate Adjustment Tube, LH 1 996010 Footrest Extension Housing Assembly 1 ITEM PART NUMBER DESCRIPTION Tube Connector 7/8" Heavy Duty 1 1 504987 CX-10 Footrest Assembly, LH Screw 1/4"-20 x 1-1/2" Flat Skt 2 Detent Pin With Webbing Assembly 1 Footplate Adjustment Tube LH 2 500969 Thread Locker-Medium-Vibra-tite 1 3 500690 Footrest Extens. Housing Assy 1 100017 Kit Includes QTY 4 10-12 Small Footplate Assembly Kit LH Item Description DESCRIPTION CX-10 Footrest Assembly, LH 1 6. Apply some thread locker Item 7 on the thread portion of the screws. Item 5 7. Using a 5/32" allen wrench, attach the footrest extension housing onto the front leg using the screws provided. Item 5 Exploded 8. Reattach the footplate adjustment tube and secure it with the detent pin. Item 6 5 4 2 1 Exploded Close-up 14 www.convaid.com 888-Convaid (266-8243) 15 996011 ITEM PART NUMBER FOOTPLATE 1 Cruiser 10 # 996011 3 500690 Footrest Extens. Housing Assy 1 4 100017 Tube Connector 7/8" Heavy Duty 1 5 100262 Screw 1/4"-20 x 1-1/2" Flat Skt 2 6 503879 Detent Pin With Webbing Assembly 1 7 100690 Thread Locker-Medium-Vibra-tite 1 INSTRUCTIONS Footplate Adjustment Tube RH 500970 7 -12 Small Footplate Assembly Kit RH Item Description 1 2 3 4 5 6 7 Qty CX-10 Footrest Assembly, RH Footplate Adjustment Tube, RH Footrest Extension Housing Assembly Tube Connector 7/8" Heavy Duty Screw 1/4"-20 x 1-1/2" Flat Skt Detent Pin With Webbing Assembly ITEM PART NUMBER Thread Locker-Medium-Vibra-tite 1 1 1 1 2 1 1 2 996011 DESCRIPTION 504988 CX-10 Footrest Assembly, RH 2 500970 Footplate Adjustment Tube RH 3 500690 Footrest Extens. Housing Assy 1 4 100017 Tube Connector 7/8" Heavy Duty 1 5 100262 Screw 1/4"-20 x 1-1/2" Flat Skt 2 6 503879 Detent Pin With Webbing Assembly 1 7 100690 Thread Locker-Medium-Vibra-tite Assembled 3 1 1 1 Cruiser 10 1 1. Pull out metal pin and remove the existing footplate extension tube. Item 2 5 2. Using a 5/32" allen wrench, remove both bolts from the housing bracket on the frame and remove existing footplate assembly components. 3. If needed, install tube connector Item 4 into the front leg by hammering or pressing it into the front leg tube. 4. Slide the loop portion of the detent pin with webbing assembly over the front 4 x-brace tube. 5. Align footrest extension housing Item 3 with the front leg. AssembledQTY 1 1 Standard Footplate Assy Kit - Right 6 Kit Includes QTY CX-10 Footrest Assembly, RH 2 Standard Footplate Assy Kit - Right DESCRIPTION 504988 1 6. Apply some thread locker Item 7 on the thread portion of the screws. Item 5 7. Using a 5/32" allen wrench, attach the footrest extension housing onto the front leg using the screws provided. Item 5 Exploded 8. Reattach the footplate adjustment tube and secure it with the detent pin. Item 6 6 7 5 4 2 1 Exploded Close-up 16 www.convaid.com 888-Convaid (266-8243) 17 996012 ITEM PART NUMBER Angle Adjustable Swing Away Footplate Assy Kit - Left # 996012 QTY 504885 CX-10 Pivot Footplate Assy LH 3 500690 Footrest Extens. Housing Assy 1 4 100017 Tube Connector 7/8" Heavy Duty 1 5 100262 Screw 1/4"-20 x 1-1/2" Flat Skt 2 6 503879 Detent Pin With Webbing Assembly 1 7 100690 Thread Locker-Medium-Vibra-tite 1 Footplate Adjustment Tube LH 2 500969 INSTRUCTIONS Cruiser 10 FOOTPLATE DESCRIPTION 1 1 Cruiser 10 1 Angle Adjustable Swing Away Footplate Assy Kit - Left 1. Pull out metal pin and remove the existing footplate extension tube. Item 2 6 mall Angle Adjustable Footplate Assembly Kit LH Kit Includes Item Description 1 2 3 4 5 6 7 CX-10 Pivot Footplate Assembly, LH Footplate Adjustment Tube, LH Footrest Extension Housing Assembly Tube Connector 7/8" Heavy Duty Screw 1/4"-20 x 1-1/2" Flat Skt Detent Pin With Webbing Assembly Thread Locker-Medium-Vibra-tite Qty 7 1 1 996012 1 ITEM PART NUMBER DESCRIPTION 1 1 504885 CX-10 Pivot Footplate Assy LH 2 Footplate Adjustment Tube LH 2 500969 1 3 500690 Footrest Extens. Housing Assy 1 1 1 Assembled 100017 Tube Connector 7/8" Heavy Duty 100262 Screw 1/4"-20 x 1-1/2" Flat Skt 6 503879 Detent Pin With Webbing Assembly 1 7 100690 Thread Locker-Medium-Vibra-tite 1 Assembled 3 6 7 2 1 5 3. If needed, install tube connector Item 4 into the front leg by hammering or pressing it into the front leg tube. 5 4. Slide the loop portion of the detent pin with webbing assembly over the front x-brace tube. QTY 4 2. Using a 5/32" allen wrench, remove both bolts from the housing bracket on the frame and remove existing footplate assembly components. 1 4 5. Align footrest extension housing Item 3 with the front leg. 6. Apply some thread locker Item 7 on the thread portion of the screws. Item 5 2 1 7. Using a 5/32" allen wrench, attach the footrest extension housing onto the front leg using the screws provided. Item 5 Exploded 8. Reattach the footplate adjustment tube and secure it with the detent pin. Item 6 5 4 2 1 Exploded Close-up 18 www.convaid.com 888-Convaid (266-8243) 19 FOOTPLATE 996011 Cruiser 10 DESCRIPTION INSTRUCTIONS ITEM PART NUMBER 1 Angle Adjustable Swing Away Footplate Assy Kit - Right # 996013 CX-10 Footrest Assembly, RH 1 2 500970 Footplate Adjustment Tube RH 1 3 500690 Footrest Extens. Housing Assy 1 4 100017 Tube Connector 7/8" Heavy Duty 1 5 100262 Screw 1/4"-20 x 1-1/2" Flat Skt 2 6 503879 Detent Pin With Webbing Assembly 1 7 100690 Thread Locker-Medium-Vibra-tite 1 Item Description 1 2 3 4 5 6 7 7 Qty CX-10 Pivot Footplate Assembly, RH 1 Footplate Adjustment Tube, RH 1 Footrest Extension Housing Assembly 1 996013 Tube Connector 7/8" HeavyITEM Duty PART NUMBER 1 DESCRIPTION Screw 1/4"-20 x 1-1/2" Flat Skt 2 1 504486 CX-10 Pivot Footplate Assy RH Detent Pin With Webbing Assembly 1 Footplate Adjustment Tube RH 2 500970 Thread Locker-Medium-Vibra-tite 1 3 500690 Footrest Extens. Housing Assy 4 100017 Tube Connector 7/8" Heavy Duty 5 100262 Screw 1/4"-20 x 1-1/2" Flat Skt 6 503879 Detent Pin With Webbing Assembly 7 100690 Thread Locker-Medium-Vibra-tite 6 7 Angle Adjustable Swing Away Footplate Assy Kit - Right 1. Pull out metal pin and remove the existing footplate extension tube. Item 2 6 Angle Adjustable Footplate Assembly Kit RH Kit Includes Cruiser 10 QTY 504988 2. Using a 5/32" allen wrench, remove both bolts from the housing bracket on the frame and remove existing footplate assembly components. 5 3. If needed, install tube connector Item 4 into the front leg by hammering or pressing it into the front leg tube. 4. Slide the loop portion of the detent pin with webbing assembly over the front x-brace tube. QTY 1 Assembled Assembled 1 2 1 4 5. Align footrest extension housing Item 3 with the front leg. 6. Apply some thread locker Item 7 on the thread portion of the screws. Item 5 1 1 3 2 1 1 7. Using a 5/32" allen wrench, attach the footrest extension housing onto the front leg using the screws provided. Item 5 8. Reattach the footplate adjustment tube and secure it with the Exploded detent pin. Item 6 5 4 2 1 Exploded Close-up 20 www.convaid.com 888-Convaid (266-8243) 21 994749 ITEM PART NUMBER WHEELS Cruiser 10 7.5" x 2" Front Solid Wheel Assy - Each DESCRIPTION 1 100763 7.5" x 2" Front Solid Tire on Grey Rim (ea) 3 100070 Washer 5/16" x 9/16" 4 100766 QTY 1 2 100765 Bolt M8-1.25mm x 90mm Socket Cap Screw INSTRUCTIONS Cruiser 10 1 6 M8-1.25 Nylon Insert 1 7.5"Locknut x 2" Front Solid Wheel Assy - Each # 994749 1. Use a 6mm allen wrench and a 1/2" wrench to remove existing front wheel. 7.5" x 2" Wheel Assembly Front (each) 4 2. Be sure to follow schematic to place washers in the proper order when installing new wheel. Kit Includes Item Description 1 2 3 4 Qty 7.5" x 2" Front Solid Tire on Gray Rim (ea) Bolt M8-1.25mm x 90mm Socket Cap Screw Washer 5/16" x 9/16" Locknut M8-1.25 Nylon Insert 1 1 6 1 3 2 994749 ITEM PART NUMBER DESCRIPTION 1 100763 7.5" x 2" Front Solid Tire on Grey Rim (ea) 2 100765 Bolt M8-1.25mm x 90mm Socket Cap Screw 3 100070 Washer 5/16" x 9/16" 4 100766 Locknut M8-1.25 Nylon Insert QTY Assembled 1 1 6 Assembled 1 3 1 3 Exploded 4 3 2 3 1 3 Exploded Close-up 22 www.convaid.com 888-Convaid (266-8243) 23 ITEM PART NUMBER WHEELS Cruiser 10 QTY 100773 Pneu Front Wheel w/3-Spokes 190mmx50mm Rolko 1 2 100765 Bolt M8-1.25mm x 90mm Socket Cap Screw 1 100766 Locknut M8-1.25 Nylon Insert 3 100070 Washer 5/16" x 9/16" INSTRUCTIONS 4 7.5" x 2" Front Pneumatic Wheel Assy - Each DESCRIPTION 1 Cruiser 10 6 1 7.5" x 2" Front Pneumatic Wheel Assy - Each # 994750 1. Use a 6mm allen wrench and a 1/2" wrench to remove existing front wheel. 4 2. Be sure to follow schematic to place washers in the proper order when installing new wheel. 2" Wheel Assembly Front Pneumatic (each) Kit Includes Item Description 1 2 3 4 Qty Pneu Front Wheel w/3-Spokes 190mmx50mm Rolko Bolt M8-1.25mm x 90mm Socket Cap Screw Washer 5/16" x 9/16" Locknut M8-1.25 Nylon Insert 3 1 1 6 1 2 Assembled 994750 ITEM PART NUMBER DESCRIPTION QTY 1 100773 Pneu Front Wheel w/3-Spokes 190mmx50mm Rolko 1 2 100765 Bolt M8-1.25mm x 90mm Socket Cap Screw 1 3 100070 Washer 5/16" x 9/16" 4 100766 Locknut M8-1.25 Nylon Insert Assembled 3 6 1 1 3 Exploded 4 3 2 3 1 3 Exploded Close-up 24 www.convaid.com 888-Convaid (266-8243) 25 Cruiser 10 WHEELS Caster Fork Assy for 7.5" x 2" Front Rolko Wheel - Each INSTRUCTIONS 1 Caster Fork Assy for 7.5" x 2" Front Rolko Wheel - Each # 996009 2 1. Use a 6mm allen wrench and a 1/2" wrench to remove existing from wheel. 2. Use a 3/4" wrench to remove top nut Item1 of the caster fork assembly. -14 Caster Kit Includes Fork Assy (Rolko Tire) Item Description 1 2 3 3. Install new Caster Fork. Qty 996009 Locknut 1/2"-20 Capped Nylon 2 DESCRIPTION "O" Ring Beuna-Nitrial ITEM PART NUMBER 2 Balloon Caster Fork Assembly 1 1 100405 Locknut 1/2"-20 Capped Nylon 4. Be sure to follow schematic to place washers in the proper order when installing new 3 wheel. QTY 2 2 100130 "O" Ring Beuna-Nitrial 2 3 500904 Balloon Caster Fork Assembly 1 Bolt Nut Washer Washer 2 F ork A te s a ck Bolt o rL Exploded o k l o ) e r Ti (R Y 2 1 Washer Nut Washer Wheel 1 2 ck Lo r st e Ca Exploded Close-up www.convaid.com QT 1 N IO PT Washer 26 3 2 RI 90 SC n 56 99 lo DE Ny ed p ap 0C ial "-2 -Nitr LH 2 / 1 a bly t n u u m RH n e e B R ck ss bly L o Ring BE k A sem M c " o s NU 5 "O t e r L kA 0 RT s oc Ca ter L PA 1004 0 3 s M 01 Ca ITE 0 10 46 4 1 50 61 44 2 50 3 4 rC Washer Assembled Assembled 1 o F y ss Cruiser 10 4 3 W h as er t Nu 888-Convaid (266-8243) 27 Cruiser 10 WHEELS 3 504460 Caster Lock Assembly LH 1 4 504461 Caster Lock Assembly RH 1 INSTRUCTIONS 1 Caster Fork Assy with Caster Lock for 7.5" x 2" Front Rolko Wheel - Pair # 995690 Cruiser 10 Caster Fork Assy with Caster Lock for 7.5" x 2" Front Rolko Wheel - Pair 2 1. Use a 6mm allen wrench and a 1/2" wrench to remove existing front wheel. Caster Lock 2. Use a 3/4" wrench to remove top nut Item1 of the caster fork assembly. aster Fork Assy For Caster Lock (Rolko Tire) 3. Install new caster fork. 4 Kit Includes Item Description 1 2 3 4 Qty 995690 ITEM PART NUMBER DESCRIPTION Locknut 1/2"-20 Capped Nylon 2 1 100405 Locknut 1/2"-20 Capped Nylon "O" Ring Beuna-Nitrial 2 100130 "O" Ring Beuna-Nitrial Caster Lock Assembly, LH 2 1 504460 Caster Lock Caster Lock Assembly, RH 3 1 Assembly LH 4 504461 QTY Bolt 2 3 4. Be sure to follow schematic to place washers in the proper order when installing new wheel. Washer 2 Assembled Assembled 1 Nut 1 Caster Lock Assembly RH Washer 1 Washer 2 Exploded Caster Lock ) r o F kA y ss r o F s a C te k c o rL Bolt lko o (R e r i T QT Y 3 2 2 1 1 N TIO P RI 90 SC n 56 99 lo DE y dN pe ap C l -20 Nitria LH /2" 1 a bly t H un nu em ly R Be ck ss A L o Ring mb k e c " o ss "O t e r L kA s oc Ca ter L s Ca ER MB U N 05 RT PA 1004 0 3 M 01 ITE 0 10 46 4 1 50 61 4 4 2 50 3 4 4 Washer Nut Washer Wheel 1 Washer 2 ck Lo r st e Ca Exploded 4 Close-up 28 www.convaid.com 3 s Wa r he t Nu 888-Convaid (266-8243) 29 ITEM PART NUMBER 1 Cruiser 10 WHEELS 11.5" x 2.5" Rear Solid Wheel Assy - Each 506842 DESCRIPTION QTY 1 Rear Wheel 290mm x 60mm (Rolko) INSTRUCTIONS Cruiser 10 11.5" x 2.5" Rear Solid Wheel Assy - Each # 994746 1. To remove, press down and hold the Rear Wheel Locking Pin. Grasp wheel and pull. 2. No tools are required to remove wheel. 1 Kit Includes Item Description 1 Qty Rear Wheel 290mm x 60mm (Rolko) Wheel Installation 1 5" x 2.5" Wheel Assy Rear Solid (each) Assembled Assembled Caution: Ensure the wheels are installed properly. You will hear a "click" when wheel locks into place. 3. To install, slide wheel onto rear axle and push with ball of hand until it clicks into place. Exploded 994746 ITEM PART NUMBER 1 506842 DESCRIPTION QTY 1 Rear Wheel 290mm x 60mm (Rolko) 1 Exploded Close-up 30 www.convaid.com 888-Convaid (266-8243) 31 INSTRUCTIONS Cruiser 10 WHEELS 12.5" x 2" Rear Solid Knobby Wheel Assy - Each Cruiser 10 994747 ITEM PART NUMBER 1 506865 12.5" x 2" Rear Solid Knobby Wheel Assy - Each DESCRIPTION 12.5" Knobby Solid Rear Wheel (Gray Hub) QTY 1 # 994747 1. To remove, press down and hold the Rear Wheel Locking Pin. Grasp wheel and pull. 2. No tools are required to remove wheel. Kit Includes x 2" Wheel Assy Rear Solid Knobby (each) Item Description 1 Qty 12.5" Knobby Solid Rear Wheel (Gray Hub) 1 Wheel Installation Caution: Ensure the wheels are installed properly. You will hear a "click" when wheel locks into place. Assembled Assembled 994747 ITEM PART NUMBER 1 506865 DESCRIPTION QTY 1 12.5" Knobby Solid Rear Wheel (Gray Hub) 3. To install, slide wheel onto rear axle and push with ball of hand until it clicks into place. Exploded 1 Exploded Close-up 32 www.convaid.com 888-Convaid (266-8243) 33 Cruiser 10 WHEELS 12.5" x 2" Rear Pneumatic Knobby Wheel Assy - Each 994748 INSTRUCTIONS ITEM PART NUMBER 1 506864 DESCRIPTION Cruiser 10 QTY 12.5" x 2" Rear Pneumatic Knobby Wheel Assy - Each 12.5" Knobby Pneu Rear Wheel (Grau Hub) 1 # 994748 1. To remove, press down and hold the Rear Wheel Locking Pin. Grasp wheel and pull. 2. No tools are required to remove wheel. Kit Includes Item Description Qty 12.5" x 2" Wheel Assy Rear Pneu Knobby (each) 1 12.5" Knobby Pneu Rear Wheel (Gray Hub) 1 Wheel Installation Caution: Ensure the wheels are installed properly. You will hear a "click" when wheel locks into place. Assembled Assembled 994748 ITEM PART NUMBER 1 506864 DESCRIPTION QTY 1 12.5" Knobby Pneu Rear Wheel (Grau Hub) 3. To install, slide wheel onto rear axle and push with ball of hand until it clicks into place. Exploded 1 Exploded Close-up 34 www.convaid.com 888-Convaid (266-8243) 35 Cruiser 10-12 Brakes LH INSTRUCTIONS Cruiser 10 WHEELS Brake Assy for Rolko Wheels - Left Cruiser 10 996005 ITEM PART NUMBER DESCRIPTION 1 506810 Brake Assy for Rolko Wheels - Left CX/ME/CB/EZ/SFT Parking Brake Assembly LH # 996005 508145 Rolko Foot Brake Lever Assy, LH 1 3 100751 Bolt 1/4"-28 x 1-3/4" Socket Button Hd Alloy Steel 2 4 100112 Locknut 1/4"-20 Jam Flexlock 1 3 6 100065 Coved Washer 3/4" 3 7 100090 Washer 7/16" AN-960-716 5 9 100751 Bolt 1/4"-28 x 1-3/4" Socket Button head 1 12 100045 Locknut 1/4"-28 Flexlock Black Zinc 2 13 100112 Locknut 1/4"-20 Jam Flexlock 1 2. Using two8 5/8” wrenches, remove the axle nut and axle. 100481 Bolt 1/4"-20 x 3/4" Socket Button Head Item Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 CX/ME/CB/EZ/SFT Parking Brake Assembly, LH Rolko Foot Brake Lever Assembly, LH Bolt 1/4"-28 x 1-3/4" Socket Button Hd Alloy Steel Locknut 1/4"-20 Jam Flexlock Nylon Washer 1/4" x 3/4" x 1/8" Coved Washer 3/4" Washer 7/16" AN-960-716 Bolt 1/4"-20 x 3/4" Socket Button Head Bolt 1/4"-28 x 1-3/4" Socket Button Head Nylon Washer 1/4" x 11/16" Washer 1/4" AN-960-416 Locknut 1/4"-28 Flexlock Black Zinc Nylon Washer 1/4" x 1/2" Thread Locker-Medium-Vibra-tite 14 15 1 ITEM PART NUMBER 1 506810 21 12 508145 33 100751 34 100112 55 100478 1 6 100065 1 7 100090 4 8 100481 3 9 100751 2 10 100013 1 11 100089 1 12 996005 DESCRIPTION 1 Rolko Foot Brake Lever Assy, LH 1 Bolt 1/4"-28 x 1-3/4" Socket Button Hd Alloy Steel 2 Locknut 1/4"-20 Jam Flexlock 1 Nylon Washer 1/4" x 3/4" x 1/8" 3 Coved Washer 3/4" 3 Washer 7/16" AN-960-716 5 Bolt 1/4"-20 x 3/4" Socket Button Head 1 Bolt 1/4"-28 x 1-3/4" Socket Button head 1 Assembled Nylon Washer 1/4" x 11/16" Assembled 6. Use a 7/16” wrench and a 5/32”2allen wrench to tighten the nuts and bolts. 11 100112 Locknut 1/4"-20 Jam Flexlock 1 14 100025 Nylon Washer 1/4" x 1/2" 1 15 100690 Thread Locker-Medium-Vibra-tite 1 15 13 14 2 5 7. Make sure not to over tighten the nuts of the Brake Lever. The Brake Lever should be 6 with minimal resistance. 9 allowed to rotate 10 8. Use two 5/8” wrenches to reattach the axle onto the frame. Axle Nut2 13 6 5. Before attaching the nuts onto the bolt, apply some loctite Item 14 onto the threads of the nut. 14 12 3 Locknut 1/4"-28 Flexlock Black Zinc 5 15 4 Washer 1/4" AN-960-416 100045 11 4. Install the14 new brake 100025 assembly. 1 to place the washers Nylon WasherBe 1/4" sure x 1/2" to follow the schematic 15 100690 Thread Locker-Medium-Vibra-tite 1 in the proper order. QTY CX/ME/CB/EZ/SFT Parking Brake Assembly LH 12 7 6 5 4 12 11 1 3 8 7 9 Axle 10 Axle Nut 1 3. Use a 7/16” wrench a 5/32” wrench to remove existing 4 brake assembly from 10 100013 andNylon Washerallen 1/4" x 11/16" 11 100089 Washer 1/4" AN-960-416 3 the frame. Kit Includes 1 2 100478 from Nylon 1/4" x 3/4" x 1/8" 1. Remove 5rear wheel theWasher frame. Cruiser 10-12 Brakes Qty LH QTY Exploded 7 6 5 14 15 4 12 11 1 36 www.convaid.com 3 8 7 Close-up Exploded Axle 888-Convaid (266-8243) 37 1 tloB 157001 3 nkcoL 211001 4 nolyN 874001 5 evoC 560001 WHEELS 6 Cruiser 10 INSTRUCTIONS 090001 7 Brake Assy for Rolko Wheel - Right hsaW 1 tloB 184001 Cruiser 10 Brake Assy for Rolko Wheel - Right 8 157001 9 # 996006 1 tloB nolyN 310001 01 hsaW 980001 11 nkcoL 540001 21 1. Remove rear wheel from the frame. nkcoL 211001 31 n olyN 520001 41 aerhT 096Kit 001 51 Includes HL sekarB tnadnettA/w sekarB 21-01 resiurC Item Description YTQ 1 1 2 51 3 3 5 1 1 4 3 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Qty 700699 21 51 CX/ME/CB/EZ/SFT Parking Brake Assembly, RH 1 NOITPIRCSED REBMUN TRAP METI Rolko Foot Brake Lever Assembly, RH 1 432805 1 HL )sekarB tnadnettA roF( yssA ekarB gnikraP XC Bolt 1/4"-28 x 1-3/4" Socket Button Hd Alloy Steel 2 HL ,yssA reveL ekarB tooF okloR 541805 2 Locknut 1/4"-20 Jam Flexlock 1 157001 3 leetS yollA dH nottuB tekcoS "4/3-1 x 82-"4/1 tloB Nylon Washer 1/4" x 3/4" x 1/8" 3 kco lxelF maJ 02-"4/1 tunkcoL 211001 43 Coved Washer 3/4" 874001 55 "8/1 x "4/3 x "4/1 rehsaW nolyN Washer 7/16" AN-960-716 "4/3 rehHead saW d evoC 560001 61 Bolt 1/4"-20 x 3/4" Socket Button Bolt 1/4"-28 x 1-3/4"6Socket 090001 71 17-069-Button NA "61/Head 7 rehs aW Nylon Washer daeH n1/4" ottuBx t11/16" ekcoS " 4/3 x 02-"4/1 tloB 184001 84 Washerda1/4" 157001 93 eh nAN-960-416 ottuB tekcoS "4/3-1 x 82-"4/1 tloB Locknut 1/4"-28 Flexlock Black Zinc "61/11 x "4/1 rehsaW nolyN 310001 01t2 uN Nylon Washer 1/4" x 1/2" 1 614-069-NA "4/1 rehsaW 980001 11 Thread Locker-Medium-Vibra-tite 1 41 cniZ kcalB kcolxelF 82-"4/1 tunkcoL 540001 21 1 kcolxelF maJ 02-"4/1 tunkcoL 211001 31 1 "2/1 x "4/1 rehsaW nolyN 520001 41 1 etit-arbiV-muideM-rekcoL daerhT 096001 51 11 3 tnadnettA9okloR ekarB 7 dedolpxE 6 2 1 4 21 5 3. Use a 7/16” wrench and a 5/32” allen wrench to remove existing brake assembly from the frame. 4. Install the new brake assembly. Be sure to follow the schematic to place the washers in the proper order. 5. Before attaching the nuts onto the bolt, apply some loctite Item 14 onto the threads of the nut. 11 6 2. Using two 5/8” wrenches, remove the axle nut and axle. 6. Use a 7/16” wrench and a 5/32” allen wrench to tighten the nuts and bolts. Assembled delbmessA 7. Make sure not to over tighten the nuts of the Brake Lever. The Brake Lever should be allowed to rotate with minimal resistance. elxA 8. Use two 5/8” wrenches to reattach the axle onto the frame. 51 4 1 14 13 14 12 21 15 51 111 1 6 delbmessA 01 10 tuAxle N elxNut A 7 5 111 1 33 8 Axle elxA 38 www.convaid.com 7 12 2 1 4 514 1 15 11 tnadneAttendant ttA okloR Rolko BrakeekarB Close-up dedolpxE 888-Convaid (266-8243) 39 WHEELS INSTRUCTIONS Cruiser 10 Brake Assy For Rolko Attendant Brake - Left 1. Remove rear wheel 2. Using two 5/8” Kit Includes ser 10-12 Brakes w/AttendantQtyBrakes LH Item Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 CX Parking Brake Assembly (For Attendant Brakes), LH Rolko Foot Brake Lever Assembly, LH Bolt 1/4"-28 x 1-3/4" Socket Button Hd Alloy Steel Locknut 1/4"-20 Jam Flexlock Nylon Washer 1/4" x 3/4" x 1/8" Coved Washer 3/4" Washer 7/16" AN-960-716 Bolt 1/4"-20 x 3/4" Socket Button Head Bolt 1/4"-28 x 1-3/4" Socket Button Head Nylon Washer 1/4" x 11/16" Washer 1/4" AN-960-416 Locknut 1/4"-28 Flexlock Black Zinc Nylon Washer 1/4" x 1/2" Thread Locker-Medium-Vibra-tite 15 12 14 996007 1 1 3 3 5 1 1 4 3 2 1 1 3 4 5 6 7 8 9 Rolko Foot Brake Lever Assy, LH 1 100751 Bolt 1/4"-28 x 1-3/4" Socket Button Hd Alloy Steel 2 100112 Locknut 1/4"-20 Jam Flexlock 1 100478 Nylon Washer 1/4" x 3/4" x 1/8" 3 100065 Coved Washer 3/4" 3 100090 Washer 7/16" AN-960-716 5 100481 Bolt 1/4"-20 x 3/4" Socket Button Head 1 100751 Bolt 1/4"-28 x 1-3/4" Socket Button head 1 100013 Nylon Washer 1/4" x 11/16" 4 100089 100045 Locknut 1/4"-28 Flexlock Black Zinc 2 13 100112 Locknut 1/4"-20 Jam Flexlock 1 14 100025 Nylon Washer 1/4" x 1/2" 1 15 100690 Thread Locker-Medium-Vibra-tite 1 11 12 14 13 5 100751 Bolt 1/4"-28 x 1-3/4" Socket Button Hd Alloy Steel 2 4 100112 Locknut 1/4"-20 Jam Flexlock 1 6 100065 Coved Washer 3/4" 3 7 100090 Washer 7/16" AN-960-716 5 from8 100481 frame. Bolt 1/4"-20 x 3/4" Socket Button Head 1 Bolt 1/4"-28 x 1-3/4" Socket Button head 1 12 9 the 11 100013 remove the 12 driver 13 100751 100089 to 100045 remove 100112 4 1/4" x 11/16" axleNylon nutWasher and axle. Washer 1/4" AN-960-416 3 Flexlock Black Zinc the Locknut Rolko 1/4"-28 Attendant Brakes from Locknut 1/4"-20 Jam Flexlock 5 the existing 2 1 14 100025 Nylon Washer 1/4" x 1/2" 1 15 100690 Thread Locker-Medium-Vibra-tite 1 5. Install the new brake assembly. Be sure to follow the schematic to place the washers 14 in the proper order. 2 9 and bolts. 7. Use a 7/16” wrench and a 5/32”6allen wrench to tighten the nuts 10 8. Make sure not to over tighten the nuts of the Brake Lever. The Brake Lever should be allowed to rotate with minimal resistance. 7 Axle Nut 6 9. Reattach the Rolko Attendant Brakes onto the brake assembly using a phillip screwdriver. 4 12 5 11 3 8 Rolko Attendant Brake 6 Cruiser 10 3 4. Use a 7/16” wrench and a 5/32” allen wrench to remove existing brake assembly from the frame. 1 7 7 Axle Exploded 11 1 3 8 Rolko Attendant Attendant Rolko BrakeBrake Exploded Close-up www.convaid.com 1 3 6. Before attaching the nuts onto the bolt, apply some loctite Item 14 onto the threads 5 11 of the nut. 15 2 9 AxleNut Nut Axle 40 15 3 10 12 1 Rolko Foot Brake Lever Assy, LH 10. Use two 5/8” wrenches to reattach the axle onto the frame. 6 4 1 508145 11 15 14 QTY Assembled Assembled Washer 1/4" AN-960-416 10 CX Parking Brake Assy (For Attendant Brakes) LH 508145 10 wrenches, 3. Use a phillips screw brake assembly. ITEM 1PART NUMBER DESCRIPTION 1 2 508234 CX Parking Brake Assy (For Attendant Brakes) LH 2 508234 2 Brake Assy For Rolko Attendant Brake - Left 5 100478 Nylon Washer 1/4" x 3/4" x 1/8" # 996007 1 7 Axle Axle 888-Convaid (266-8243) 41 nikraP XC 532805 1 tooF okloR 641805 2 157001 3 2-"4/1 tloB /1 tunkcoL saW nolyN aW devoC /7 rehsaW 2-"4/1 tloB WHEELS 211001 4 Cruiser 10 INSTRUCTIONS 874001 5 Brake Assy with Attendant Brakes - Right 560001 6 Cruiser 10 Brake Assy with Attendant Brakes - Right 0001 7 #1089996008 4001 8 2-"4/1 tloB 157001 9 saW nolyN 310001 01 /1 rehsaW 980001 11 /1 tunkcoL 540001 21 /1 tunkcoL 1. Remove rear wheel from the frame. 2. Using two 5/8” wrenches, remove the axle nut and axle. 211001 31 s a W n olyN 5Kit 20001Includes 41 oL daerhT 096001 51 HL sekarB Qty tnadnettA/w sekarB 21-01 resiurC Item Description 1 2 YTQ 3 1 4 1 5 26 17 38 39 5 10 1 11 1 12 13 4 14 3 CX Parking Brake Assembly (For Attendant Brakes), RH 700699 Rolko Foot Brake Lever Assembly, RH NOITPIRCSED REBMUN TRAP Bolt 1/4"-28 x 1-3/4" Socket Button Hd Alloy Steel 432805 HL )sekarB tnadnettA roF( yssA ekarB gnikraP XC Locknut 1/4"-20 Jam Flexlock HL ,yssA reveL ekarB tooF okloR 541805 Nylon Washer 1/4" x 3/4" x 1/8" 157001 leetWasher S yollA d3/4" H no ttuB tekcoS "4/3-1 x 82-"4/1 tloB Coved kcolx elF maJ 02-"4/1 tunkcoL 211001 Washer 7/16" AN-960-716 874001 "8/1 xButton "4/3 x "4 /1 reh saW nolyN Bolt 1/4"-20 x 3/4" Socket Head " 4 / 3 r e h s a W d e v o C 560001 Bolt 1/4"-28 x 1-3/4" Socket Button Head 090001 617 -069-NA "61/7 rehsaW Nylon Washer 1/4" x 11/16" daeH nottuB tekcoS "4/3 x 02-"4/1 tloB 184001 Washer 1/4" AN-960-416 157001 daehFlexlock nottuB teBlack kcoS "Zinc 4/3-1 x 82-"4/1 tloB Locknut 1/4"-28 Nylon Washer 1/4" x 1/2""6 1/11 x "4/1 rehsaW nolyN 310001 Thread Locker-Medium-Vibra-tite 614-069 -NA "4/1 rehsaW 980001 1 1 METI 2 1 1 2 3 33 54 15 16 47 38 29 1 01 1 11 2 cniZ kcalB kcolxelF 82-"4/1 tunkcoL 540001 21 1 kcolxelF maJ 02-"4/1 tunkcoL 211001 31 1 "2/1 x "4/1 rehsaW nolyN 520001 41 1 etit-arbiV-muideM-rekcoL daerhT 096001 51 4. Use a 7/16” wrench and a 5/32” allen wrench to remove existing brake assembly from the frame. 5. Install the new brake assembly. Be sure to follow the schematic to place the washers in the proper order. 7. Use a 7/16” wrench and a 5/32” allen wrench to tighten the nuts and bolts. 8. Make sure not to over tighten the nuts of the Brake Lever. The Brake Lever should be allowed to rotate with minimal resistance. 9. Reattach the Rolko Attendant Brakes onto the brake assembly using a phillip screwdriver. 12 21 15 51 14 10. Use two 5/8” wrenches to reattach the axle onto the frame. 11 11 9 dedolpxE 6 5 6. Before attaching the nuts onto the bolt, apply some loctite Item 14 onto the threads of the nut. Assembled delbmessA 4 1 14 13 2 3. Use a phillips screw driver to remove the Rolko Attendant Brakes from the existing brake assembly. 6 delbmessA 01 10 Nut tuAxle N elxA 7 5 11 11 3 8 elxAxle A 42 www.convaid.com 7 21 12 4 15 514 1 1 tnaRolko dnettAAttendant okloR e karB Brake Close-up dedolpxE 888-Convaid (266-8243) 43 INSTRUCTIONS COLOR OPTIONS Cruiser 10 Cordura Upholstery Cordura Textilene Quality Apple Green Navy Blue Comfort Aqua Blue Teal Green Cherry Red Violet Purple Chocolate Brown Wild Raspberry Forest Green ●● Puncture, tear, rip, stain, and mildew resistance built in. ●● Self extinguishing and will not act as an accelerant in a fire. ●● Parents and clinicians want to see upholstery that will keep their child comfortable and stress free for periods of sitting. ●● Nylon or Textilene upholstery appears abrassive to the skin and devoid of any significant padding. Function ●● The Cordura provides mild positioning capabilities through padding built up in key area. Panther Black Style Princess Pink ●● Parents want a product that looks stylish and contemporary (does not look like a wheelchair). Royal Blue Sassy Purple Cleanable ●● Cordura is washable for good hygiene. Tangerine Orange Upholstery Convaid uses 2 types of upholstery: Cordura ●● ●● ●● ●● ●● Know around the world for its durability, abrasion resistance and high performance. Great tactile feel. Provides mild positioning capabilities through padding in key areas. Quality and Longevity. Comfortable Textilene ●● Low Maintenance. ●● Stain proof. NOTE: Not all options and accessories are available in all colors. 44 www.convaid.com 888-Convaid (266-8243) 45 Cordura Back Upholstery Heavy Duty Cordura Seat Bottom Upholstery Heavy Duty Cordura Back Upholstery 991396 991318 991397 991696 991621 991697 990296 990221 990297 990396 990321 990397 Cruiser 10 UPHOLSTERY Cordura Seat Bottom Upholstery INSTRUCTIONS Cruiser 10 Fabric Removal Instructions # 991316 1. Partially fold the chair to relieve fabric tension (see fold instruction on page 4 in User Guide). the lower seat panel is attached to the back panel with velcro. Remove Velcro® from the top of the seat bottom. Press grey detent pin at the end of the seat extension, and take off upholstery. Back Upholstery Item Description 1 Qty CX-10 Cordura Seat Bottom Upholstery 2. To remove the top portion of the seat, remove the Velcro® straps that attach the seat Upholstery to the frame,and take off upholstery. Lift fabric off seat tubes and away from upper handles. The seat-reinforcing strap should remain on frame. 1 1 Seat Bottom Upholstery Cruiser 10-16 Cordura Seat Upholstery PART NUMBERS DESCRIPTION CX10 Cordura Seat Bottom Upholstery 991316 Cordura Back Upholstery 991396 Heavy Duty Cordura Seat Bottom Upholstery 991318 Heavy Duty Cordura Back Upholstery 991397 CX12 991619 991696 991621 991697 CX14 990219 990296 990221 990297 CX16 990319 990396 990321 990397 Cordura Back Upholstery # 991396 1 Back Upholstery Item Description 1 CX-10 Cordura Back Upholstery Qty 1 Seat Bottom Upholstery 46 www.convaid.com 888-Convaid (266-8243) 47 UPHOLSTERY PART NUMBERS DESCRIPTION CX10 Cordura Seat Bottom Upholstery 991316 Cordura Back Upholstery 991396 Heavy Duty Cordura Seat Bottom Upholstery 991318 Heavy Duty Cordura Back Upholstery 991397 Heavy Duty Cordura Seat Bottom Upholstery # 991318 Cruiser 10 CX12 991619 991696 991621 991697 CX14 990219 990296 990221 990297 CX16 990319 990396 990321 990397 INSTRUCTIONS Cruiser 10 Fabric Removal Instructions 1. Partially fold the chair to relieve fabric tension (see fold instruction on page 4 in User Guide). The lower seat panel is attached to the back panel with velcro. Remove Velcro® from the top of the seat bottom. Press grey detent pin at the end of the seat extension, and take off upholstery. Item Description 1 QtyBack Upholstery CX-10 Heavy Duty Cordura Seat Bottom 2. To remove the top portion of the seat, remove the Velcro® straps that attach the seat Upholstery to the frame,and take off upholstery. Lift fabric off seat tubes and away from upper handles. The seat-reinforcing strap should remain on frame. 1 1 Seat Bottom Upholstery Cruiser 10-16 Cordura Seat Upholstery PART NUMBERS DESCRIPTION CX10 Cordura Seat Bottom Upholstery 991316 Cordura Back Upholstery 991396 Heavy Duty Cordura Seat Bottom Upholstery 991318 Heavy Duty Cordura Back Upholstery 991397 Heavy Duty Cordura Back Upholstery # 991397 CX12 991619 991696 991621 991697 CX14 990219 990296 990221 990297 CX16 990319 990396 990321 990397 1 Item Description 1 Qty CX-10 Heavy Duty Cordura Back Upholstery Back Upholstery 1 Seat Bottom Upholstery 48 www.convaid.com 888-Convaid (266-8243) 49 UPHOLSTERY Textilene Seat Bottom Upholstery PART NUMBERS DESCRIPTION CX10 Textilene Seat Bottom Upholstery 991394 Textilene Back Upholstery 991398 Heavy Duty Textilene Bottom Seat Upholstery 991395 Heavy Duty Back Upholstery 991399 CX12 991694 991698 991695 991699 CX16 Cruiser 10 990394 CX14 990294 990298 990295 990299 990398 990395 990399 INSTRUCTIONS Cruiser 10 Fabric Removal Instructions # 991394 1. Partially fold the chair to relieve fabric tension (see fold instruction on page 4 in User Guide). The lower seat panel is attached to the back panel with velcro. Remove Velcro® from the top of the seat bottom. Press grey detent pin at the end of the seat extension, and take off upholstery. Item Description 1 Qty CX-10 Textilene Seat Bottom Upholstery 1 Seat Bottom Upholstery 2. To remove the top portion of the seat, remove the Velcro® straps that attach the seat Upholstery to the frame,and take off upholstery. Lift fabric off seat tubes and away from upper handles. The seat-reinforcing strap should remain on frame. Back Upholstery 1 Cruiser 10-16 Textilene Seat Upholstery PART NUMBERS DESCRIPTION CX10 Textilene Seat Bottom Upholstery 991394 Textilene Back Upholstery 991398 Heavy Duty Textilene Bottom Seat Upholstery 991395 Heavy Duty Back Upholstery 991399 CX12 991694 991698 991695 991699 CX14 990294 990298 990295 990299 CX16 990394 990398 990395 990399 Textilene Back Upholstery # 991398 Back Upholstery Item Description 1 1 Qty CX-10 Textilene Back Upholstery 1 Seat Bottom Upholstery 50 www.convaid.com 888-Convaid (266-8243) 51 UPHOLSTERY PART NUMBERS DESCRIPTION CX10 Textilene Seat Bottom Upholstery 991394 Textilene Back Upholstery 991398 Heavy Duty Textilene Bottom Seat Upholstery 991395 Heavy Duty Back Upholstery 991399 Heavy Duty Textilene Seat Bottom Upholstery # 991395 Item Description 1 CX12 991694 991698 991695 991699 Cruiser 10 CX16 CX14 990294 990298 990295 990299 990394 990398 990395 990399 INSTRUCTIONS Cruiser 10 Fabric Removal Instructions 1. Partially fold the chair to relieve fabric tension (see fold instruction on page 4 in User Guide). The lower seat panel is attached to the back panel with velcro. Remove Velcro® from the top of the seat bottom. Press grey detent pin at the end of the seat extension, and take off upholstery. Qty CX-10 Heavy Duty Textilene Seat Bottom Upholstery 1 2. To remove the top portion of the seat, remove the Velcro® straps that attach the seat Upholstery to the frame,and take off upholstery. Lift fabric off seat tubes and away from upper handles. The seat-reinforcing strap should remain on frame. Back Upholstery 1 Seat Bottom Upholstery Cruiser 10-16 Textilene Seat Upholstery PART NUMBERS DESCRIPTION CX10 Textilene Seat Bottom Upholstery 991394 Textilene Back Upholstery 991398 Heavy Duty Textilene Bottom Seat Upholstery 991395 Heavy Duty Back Upholstery 991399 CX12 991694 991698 991695 991699 CX14 990294 990298 990295 990299 CX16 990394 990398 990395 990399 Heavy Duty Textilene Back Upholstery # 991399 Item Description 1 Qty CX-10 Heavy Duty Textilene Back Upholstery 1 1 Back Upholstery Seat Bottom Upholstery 52 www.convaid.com 888-Convaid (266-8243) 53 Cruiser 10 Cordura Seat w/3" Seat Depth Extension Kit INSTRUCTIONS Cruiser 10 UPHOLSTERY Y QT 1 Cordura Upholstery with +3" Seat Depth Extension Cordura Upholstery with +3" Seat Depth Extension 1 # 995915 995915 ra Seat w/3" Seat Depth Extension Kit ra du 1 ITEM PART NUMBER ) DESCRIPTION 508069 CX-10/12 Seat Extension Tube Assy +3" 1 2 508546 CX-10 Standard Seat Assy 3" Extension (Cordura) 1 3 507645 Velcro 1-1/2" Back To Back Black 34" Long 1. Remove upholstery and 1 seat tube extensions from frame. Ki TY ns io n 2. Partially fold the frame. h 1 1 1 Q a) 2 1 1 1 3. Using a 7/16” wrench and a 5/32” allen wrench, remove the bolt connecting the seat tube to the black slide housing from the left side of the frame. 2 Qty CX-10 Standard Seat Assembly 3" Extension (Cordura) Velcro® 1-1/2" Back To Back Black 34" Long CX-10 Self-TensioTM (Seat Support Webbing +3") ITEM PART NUMBER PA RT NU 50 80 MB ER 50 69 8 50 54 76 6 45 CX CX -10 /1 99 2 Ve -10 59 St Sea lcr 15 an o t 1da Ex D 1/ 2" rd S tens ES CR io Ba e IP ck a t A n T u ss To be TIO y N Ba A 3" ck Ex ssy Bl +3 ac tens " k3 io n 4" (C Lo o ng r d u r Ex te 2 3 4 QTY 1 t ON +3" or TI (C y P I s n s R A sio ng SC be ten " Lo x DE Tu 4 E 3" k3 ion acKit Includes ns ssy l A kB at ac Se o B Item Description T ck 1 CX-10/12 Seat Extension Tube Assembly +3" Ba Cruiser 10 4. Slide existing seat support off. 995915 DESCRIPTION QTY 1 508069 CX-10/12 Seat Extension Tube Assy +3" 1 2 508546 CX-10 Standard Seat Assy 3" Extension (Cordura) 1 3 507645 Velcro 1-1/2" Back To Back Black 34" Long 1 1 5. Slide new seat support onto the seat tube. Make sure the cutout of the seat support goes around the front leg. 6. Reattach the bolt connecting the seat tube to the black slide housing. 7. Use a 7/16” wrench and a 5/32” allen wrench to tight the nut and bolt. Assembled Assembled 8. Repeat steps 3 to 7 for the right side. 3 2 9. Reinstall the seat tube extension and the upholstery. Exploded 1 3 2 1 1 Ex 3 de o l p d 4 ed 2 Ex p lod 3 Exploded 3 IT EM 1 Close-up 54 www.convaid.com 888-Convaid (266-8243) 55 Cruiser 10 Cordura Seat w/3" Seat Depth Extension Kit INSTRUCTIONS Cruiser 10 UPHOLSTERY TY Q Heavy Duty Cordura Upholstery with +3" Seat Depth Extension 1 Heavy Duty Cordura Upholstery with +3" Seat Depth Extension 1 1 # 995916 995915 ra Seat w/3" Seat Depth Extension Kit ra du ITEM PART NUMBER ) DESCRIPTION QTY 1 508069 CX-10/12 Seat Extension Tube Assy +3" 1 2 508546 CX-10 Standard Seat Assy 3" Extension (Cordura) 1 3 507645 Velcro 1-1/2" Back To Back Black 34" Long 1. Remove upholstery and 1 seat tube extensions from frame. Ki t N " r IO +3 (Co PT ssy I n R A sio ng SC be ten " Lo x DE Tu 4 E 3" k3 ion acKit Includes ns ssy l A kB at ac Se o B Item Description T ck 1 CX-10/12 Seat Extension Tube Assembly +3" Ba Cruiser 10 h 1 1 1 Q a) 2 1 1 1 3. Using a 7/16” wrench and a 5/32” allen wrench, remove the bolt connecting the seat tube to the black slide housing from the left side of the frame. 2 Qty CX-10 Heavy Duty Seat Assembly 3" Extension (Cordura) Velcro® 1-1/2" Back To Back Black 34" Long CX-10 Self-TensioTM (Seat Support Webbing +3") ITEM PART NUMBER PA RT NU 50 80 MB ER 50 69 8 50 54 76 6 45 CX CX -10 /1 99 2 Ve -10 59 St Sea lcr 15 an o t 1da Ex D 1/ 2" rd S tens ES CR io Ba ea IP ck tA nT TI ub ss To O e N Ba y 3 A ss "E ck y x Bl +3 ac tens " k3 io n 4" (C Lo o ng r d u r Ex te 2 3 4 TY ns io n 2. Partially fold the frame. 4. Slide existing seat support off. 995915 DESCRIPTION QTY 1 508069 CX-10/12 Seat Extension Tube Assy +3" 1 2 508546 CX-10 Standard Seat Assy 3" Extension (Cordura) 1 3 507645 Velcro 1-1/2" Back To Back Black 34" Long 1 1 5. Slide new seat support onto the seat tube. Make sure the cutout of the seat support goes around the front leg. 6. Reattach the bolt connecting the seat tube to the black slide housing. 7. Use a 7/16” wrench and a 5/32” allen wrench to tight the nut and bolt. Assembled Assembled 8. Repeat steps 3 to 7 for the right side. 3 2 9. Reinstall the seat tube extension and the upholstery. Exploded 1 3 2 1 1 Ex 3 de o l p d 4 ed 2 Ex p lod 3 Exploded 3 IT EM 1 Close-up 56 www.convaid.com 888-Convaid (266-8243) 57 995917 ITEM PART NUMBER Cruiser 10 UPHOLSTERY DESCRIPTION 508069 CX-10/12 Seat Extension Tube Assy +3" 1 2 507142 CX-10 Standard Seat Assy 3" Extension (Textilene) 1 INSTRUCTIONS 3 507645 Velcro 1-1/2" Back To Back Black 34" Long Textilene Upholstery with +3" Seat Depth Extension QTY 1 Cruiser 10 1 Textilene Upholstery with +3" Seat Depth Extension # 995917 t 1. Remove upholstery and seat tube extensions from frame. Ki 2. Partially fold the frame. n 3. Using a 7/16” wrench and a 5/32” allen wrench, remove the bolt connecting the seat tube to the black slide housing from the left side of the frame. xtilene Seat w/3" Seat Depth Extension Kit Q TY ns io Kit Includes th 1 1 existing seat support off. 4. Slide 1 CX-10/12 Seat Extension Tube Assembly +3" 2 CX-10 Standard Seat Assembly 3" Extension (Textilene) 1 Velcro® 1-1/2" Back To Back Black 34" Long 1 ITEM CX-10 Self-TensioTM (Seat Support Webbing +3") PART NUMBER1 5. Slide new seat support onto the seat tube. Make sure the cutout of the seat support goes around the front leg. 995917 DESCRIPTION a) PA RT NU 50 80 MB ER 50 69 8 50 54 76 6 45 CX CX -10 /1 99 2 Ve -10 59 St Sea lcr 15 an o t 1da Ex D 1/ 2" rd S tens ES CR io Ba e IP ck a t A n T u ss To be TIO y N Ba A 3" ck Ex ssy Bl + t 3" ac ens k3 io n 4" ( Lo Co ng r d u r Ex te 1 2 3 4 Qty 1 Item Description QTY 1 508069 CX-10/12 Seat Extension Tube Assy +3" 1 2 507142 CX-10 Standard Seat Assy 3" Extension (Textilene) 1 3 507645 Velcro 1-1/2" Back To Back Black 34" Long 1 6. Reattach the bolt connecting the seat tube to the black slide housing. 3 Assembled 7. Use a 7/16” wrench and a 5/32” allen wrench to tight the nut and bolt. 8. Repeat steps 3 to 7 for the right side. 9. Reinstall the seat tube extension and the upholstery. 1 3 2 1 1 2 ed 4 Ex p lod 3 3 IT EM 2 Close-up 58 www.convaid.com 888-Convaid (266-8243) 59 995917 ITEM PART NUMBER Cruiser 10 UPHOLSTERY DESCRIPTION 1 508069 CX-10/12 Seat Extension Tube Assy +3" 3 507645 Velcro 1-1/2" Back To Back Black 34" Long 2 507142 CX-10 Standard Seat Assy 3" Extension (Textilene) INSTRUCTIONS Heavy Duty Textilene Upholstery with +3" Seat Depth Extension QTY 1 Cruiser 10 1 1 Heavy Duty Textilene Upholstery with +3" Seat Depth Extension # 995918 t 1. Remove upholstery and seat tube extensions from frame. Ki 2. Partially fold the frame. 3. Using a 7/16” wrench and a 5/32” allen wrench, remove the bolt connecting the seat tube to the black slide housing from the left side of the frame. n Kit Includes xtilene Seat w/3" Seat Depth Extension Kit Q 1 1 PA RT NU 50 80 MB ER 50 69 8 50 54 76 6 45 CX CX -10 /1 99 2 Ve -10 59 St Sea lcr 15 an o t 1da Ex D 1/ 2" rd S tens ES CR io Ba e IP ck a t A n T u ss To be TIO y N Ba A 3" ck Ex ssy Bl + 3" ac tens k3 io n 4" ( Lo Co ng r d u r h 4. Slide 1 existing seat support off. 1 CX-10/12 Seat Extension Tube Assembly +3" 2 CX-10 Heavy Duty Seat Assembly 3" Extension (Textilene) 1 Velcro® 1-1/2" Back To Back Black 34" Long 1 CX-10 Self-TensioTM (Seat Support Webbing +3") 1 ITEM PART NUMBER 5. Slide new seat support onto the seat tube. Make sure the cutout of the seat support goes around the front leg. 995917 DESCRIPTION a) Ex te 1 2 3 4 Qty TY ns io Item Description QTY 1 508069 CX-10/12 Seat Extension Tube Assy +3" 1 2 507142 CX-10 Standard Seat Assy 3" Extension (Textilene) 1 3 507645 Velcro 1-1/2" Back To Back Black 34" Long 1 Assembled 6. Reattach the bolt connecting the seat tube to the black slide housing. 3 7. Use a 7/16” wrench and a 5/32” allen wrench to tight the nut and bolt. 8. Repeat steps 3 to 7 for the right side. 9. Reinstall the seat tube extension and the upholstery. 1 3 2 1 1 2 ed 4 Ex p lod 3 3 IT EM 2 Close-up 60 www.convaid.com 888-Convaid (266-8243) 61 DESCRIPTION Cruiser 10 Headrest Extension - Curved - Cordura Headrest Extension - Rectangular - Textilene HEAD SUPPORT Headrest Extension - Curved Cordura PART NUMBERS CX10 CX12 CX14 CX16 INSTRUCTIONS 995927 996027 996127 996227 995928 996028 996128 996228 Cruiser 10 CX18 996327 996328 Headrest Extension # 995927 Item Description 1 1 Qty Headrest Extension - Curved Cordura 1. Insert Headrest Extension on Tubes into the Headrest Holding Brackets and push down. 2 1 Back Back Upholstery Upholstery (Cordura) (Cordura) ension - Curved - Cordura Back Upholstery (Textilene) ension - Rectangular - Textilene DESCRIPTION Headrest Extension - Curved - Cordura Headrest Extension - Rectangular - Textilene PART NUMBERS CX10 CX12 995927 996027 995928 996028 CX14 996127 996128 CX16 996227 996228 CX18 996327 996328 Headrest Extension - Rectangular Textilene # 995928 1 2 Item Description 1 Qty Headrest Extension - Rectangular Textilene 1 Back Upholstery (Textilene) Back Upholstery (Textilene) 62 www.convaid.com 888-Convaid (266-8243) 63 DESCRIPTION Cruiser 10 Occi Headwings Padded Headwings HEAD SUPPORT Occi Headwings CX10 995932 995933 PART NUMBERS CX12 CX14 CX16 INSTRUCTIONS 995932 996132 996132 996033 996133 996233 CX18 996332 996333 Cruiser 10 Occi Headwings # 995932 Item Description 1 1. Occi Headwings supports and positions the head at the occipital area. This headrest provides added comfort, allows side to side head movement without obstruction, and does not block the individual's ears and line of vision. Qty Occi Headwings 1 2. The Occi headwing can be attached at any height. Secure headwing by tying laces through the grommet holes at the back of the seat fabric or headrest extension. 1 Back Upholstery 2 Back Upholstery wings Back Upholstery adwings DESCRIPTION Occi Headwings Padded Headwings CX10 995932 995933 PART NUMBERS CX12 CX14 995932 996132 996033 996133 Padded Headwings # 995933 Item Description 1 Padded Headwings CX16 996132 996233 CX18 996332 996333 Padded Headwings ●● Adjustable padded headwings provide soft foam support for midline positioning. The padded headwings can be attached at any height by wrapping the Velcro® straps around the frame and attaching at the back of the chair. Secure headwings by tying laces through the grommet holes in the back of the seat fabric or headrest extension. Qty 1 1 2 Back Upholstery Back Upholstery 64 www.convaid.com 888-Convaid (266-8243) 65 INSTRUCTIONS Cruiser 10 TRUNK POSITIONING H-Harness with Padded Covers # 996610 6 H-Harness w/Padded Cover 1 Kit Includes Item Description 1 2 Qty Padded Strap Cover 9" H-Harness 1-1/2" Assembly 1 1 2 Cruiser 10 996610 H-Harness with Padded Covers ITEM PART NUMBER DESCRIPTION QTY 1 100173 Padded Strap Cover 9" 1 2 500713 H-Harness 1-1/2" Assembly 1 ●● H-harness shoulder straps help the user retain upright trunk position. To adjust, insert the bolt at the end of the strap through the grommet hole in the seat back. Grommet choice should be level with or higher than the top of the shoulders. Choose a hole that will keep the user secure face or neck. Secure the strap with the threaded knob. Shoulder pads for the H-harness are standard. The pads come equipped with a snap buckle for easy attachment. 996610 ITEM PART NUMBER DESCRIPTION 1 100173 Padded Strap Cover 9" 2 500713 H-Harness 1-1/2" Assembly QTY Assembled Assembled 1 1 Exploded 1 2 Close-up Exploded 66 www.convaid.com 888-Convaid (266-8243) 67 Cruiser 10 TRUNK POSITIONING Full Torso Support Vest 1 Full Torso Support Vest for Cordura Upholstery Cruiser 10 Full Torso Support Vest # 995925 Item Description INSTRUCTIONS ●● An Adjustable support vest keeps the user in place comfortably and securely. It helps to maintain midline seating position and attached to the chair with straps that wrap around the seat back and connect with Velcro®, and shoulder straps that screw into the seat bacl. Adjust the side straps for proper fit. Qty 1 # 995926 Item Description 1 Full Torso Support Vest for Textilene Upholstery Qty 1 1 Reducer Seat Insert # 996636 Item Description 1 Reducer Seat Insert Reducer Seat Insert ●● The Reducer Seat Insert provides proper positioning in an oversized wheelchair. This cushion easily slips into the seat of the chair to reduce the seat width 2” and the seat depth 1”. The ribbed surface provides comfort and promotes airflow. Qty 1 1 68 www.convaid.com 888-Convaid (266-8243) 69 TRUNK POSITIONING Cruiser 10 Soft Adjustable Lateral Support - Single Flap INSTRUCTIONS Cruiser 10 Soft Adjustable Lateral Support - Single Flap # 995935 Item Description 1 Qty Soft Adjustable Lateral Single Flap 1 1. Attach the Lateral Trunk Support to the chair by wrapping the two rear straps around the back of the chair and securing with Velcro®. 2. Attach the single flap, by wrapping the strap on the left flap around the side tubing of the frame, and securing with Velcro® (repeat steps on opposite side) 3. Thread the scoliosis strap through the plastic loop on the left flap, back through the plastic loop on the opposite end of the strap, and pull tight. 4. Bring the scoliosis strap across the chest, thread it through the plastic loop on opposite flap, and fasten with Velcro®. To support the right side of the trunk, attach the support to the chair with the doublesided Velcro® strap on the left side. Detach the strap on the right flap from the tubing, and tighten scoliosis strap until desired trunk positioning is obtained. 1 5. To support the left side of the trunk, attach the support to the chair with the doublesided Velcro® strap on the right side. Detach the strap on the left flap from the tubing, and tighten scoliosis strap until desired trunk positioning is obtained. Soft Adjustable Lateral Support - Double Flap # 995936 Item Description 1 Soft Adjustable Lateral Double Flap Qty 1 Soft Adjustable Lateral Support - Double Flap ●● ●● ●● ●● The Double Flap Lateral Trunk Support brings the trunk to midline position. The Inner flaps mobilize the trunk. The Outer flaps centralize the trunk and keep the arms in the front of the chair. The Scoli strap aligns the spine. 1. Attach the Lateral Trunk Support to the chair by wrapping the two rear straps around the back of the chair and securing with Velcro®. 2. To attach the double flap, wrap the strap on the left-hand outer flap around the side tubing of the frame and secure with Velcro®. 1 3. Thread the strap on the left-hand inner flap into the plastic loop on the outer flap working from front to back. 4. Adjust and secure strap. (Repeat steps 3 and 4 on right-hand flap.) 5. Bring the long scoliosis strap through the plastic loop on the inner flap on the righthand side and across the chest. 6. Thread the strap through the plastic loop on the inner flap on the left-hand side. 7. Fasten the strap with Velcro®. 8. If additional tightness is desired, pull the scoliosis strap further and Velcro® it beyond the inner flap. 9. Attaching Lateral Trunk Support Double Flap 70 www.convaid.com Note: The Lateral Trunk Support - Double Flap can be used to support either the left or right side of the trunk. 888-Convaid (266-8243) 71 Cruiser 10 TRUNK POSITIONING Upper Extremity Support Surface Tray INSTRUCTIONS Cruiser 10 Upper Extremity Support Surface Tray # 995938 ATTACHING THE TRAY 1. Raise front of the tray with the tray supports completely unfolded. 2. Engage knobs on side of chair with tray hooks underneath. Kit Includes Item Description 1 2 Upper Extremity Support Surface Tray Hardware Qty 3. Lower tray until supports are positioned over the outside of the front legs. 1 1 1 2 Close-up 72 www.convaid.com 888-Convaid (266-8243) 73 Cruiser 10 PELVIC POSITIONING 3 Point Belt with Depth Adjustable Crotch Strap INSTRUCTIONS Cruiser 10 3 Point Belt with Depth Adjustable Crotch Strap # 995683 1. The crotch strap can be adjusted by threading the strap through the desired slot. Item Description 1 3 Point Belt With Depth Adjustable Crotch Strap Qty 1 1 Adjustable Crotch Strap for 3 Point Belt # 994716 Item Description 1 Crotch Pad Assembly Qty 1 1 Close-up 74 www.convaid.com 888-Convaid (266-8243) 75 INSTRUCTIONS Cruiser 10 PELVIC POSITIONING Support Seat Cushion Assy Cruiser 10 1 Support Seat Cushion Assy # 995919 1. Use a 5/32" allen wrench to remove the hardware attached on the existing cushion. 2. Reattach hardware to the new cushion. Be sure to follow the schematic to place the washers in the proper order. Kit Includes Item Description 1 2 3 Qty CX-10 Sensiform Support Cover CX-10 Sensiform Support Cushion Solid Seat Insert Cruiser 10 Support Seat Cushion & Cover 1 1 1 Assembled Item Assembled 995919 ITEM PART NUMBER 1 1 508978 DESCRIPTION QTY CX-10 Sensiform Support Cushion & Cover 1 Cushion Attachment Cushion Attachment Bar 1 1" OD Metal Washer 2 Metal Washer 3 Small Metal Washer Support Nylon Washer Assembled Screw Exploded Close-up 76 www.convaid.com 888-Convaid (266-8243) 77 PELVIC POSITIONING Cruiser 10 Align Seat Cushion Assy 1 INSTRUCTIONS Cruiser 10 Align Seat Cushion Assy # 995920 1. Use a 5/32" allen wrench to remove the hardware attached on the existing cushion. 2. Reattach hardware to the new cushion. Be sure to follow the schematic to place the washers in the proper order. Kit Includes Item Description 1 2 3 Qty CX-10 Sensiform Align Cover CX-10 Sensiform Align Cushion Solid Seat Insert Cruiser 10 Support Seat Cushion & Cover 1 1 1 Assembled Assembled Item 995919 ITEM PART NUMBER 1 1 508978 DESCRIPTION CX-10 Sensiform Support Cushion & Cover QTY 1 Cushion Attachment Cushion Attachment Bar 1 1" OD Metal Washer 2 Metal Washer Small Metal Washer 3 Nylon Washer Align Assembled Screw Exploded Close-up 78 www.convaid.com 888-Convaid (266-8243) 79 INSTRUCTIONS Cruiser 10 PELVIC POSITIONING 1 Position Seat Cushion Assy Cruiser 10 Position Seat Cushion Assy # 995921 1. Use a 5/32" allen wrench to remove the hardware attached on the existing cushion. 2. Reattach hardware to the new cushion. Be sure to follow the schematic to place the washers in the proper order. Kit Includes Item Description 1 2 3 Qty CX-10 Sensiform Position Cover CX-10 Sensiform Position Cushion Solid Seat Insert Cruiser 10 Support Seat Cushion & Cover 1 1 1 Assembled Item Assembled 995919 ITEM PART NUMBER 1 1 508978 DESCRIPTION QTY CX-10 Sensiform Support Cushion & Cover 1 Cushion Attachment Cushion Attachment Bar 1 1" OD Metal Washer 2 Metal Washer Small Metal Washer 3 Position Nylon Washer Assembled Screw Exploded Close-up 80 www.convaid.com 888-Convaid (266-8243) 81 Cruiser 10 PELVIC POSITIONING Lateral Thigh Support - Adductor # 995929 Item Description 1 Qty Lateral Thigh Support - Adductor 1 INSTRUCTIONS Cruiser 10 Lateral Thigh Support - Adductor 1. Pulls thighs together, improving hip alignment and stabi li zing seating position. 2. The degree of adduction can be varied and can favor one side. Fold the adductor flaps over the thighs, wrap the straps under and around the armrest tube and attach with buckle. 3. The adductor is attached with screws at the end of the seat tubes. 1 Medical Thigh Support - Abductor # 995930 Item Description 1 Qty Medical Thigh Support - Abductor 1 Medical Thigh Support - Abductor 1. Separates the thighs to improve hip alignment and stabilize sitting posture. Degree of abduction can be varied and can favor one side. The abductor flaps wrap over the user’s thighs from the inside to the outside. 2. The straps buckle around the seat tube or the armrest. They can also be wrapped around the armrest tube twice for high tone children. 1 82 www.convaid.com 3. The abductor i s attached with screws at the end of the seat tubes. 888-Convaid (266-8243) 83 Cruiser 10 PELVIC POSITIONING INSTRUCTIONS Cruiser 10 Q’Straint Transit Lap Belt # 996638 Item Description 1 Q' Straint Transit Lap Belt - Short Qty 1 1 Sure-Lok Transit lap belt # 996639 Item Description 1 Sure-Lok Transit Lap Belt - Short Qty 1 1 84 www.convaid.com 888-Convaid (266-8243) 85 Foot Securement Strap 996619 1 Calf Panel 3 Foot Securement Strap FOOT & LEG POSITIONING Calf Panel # 996615 996619 996619 DESCRIPTION Calf Panel PART NUMBERS DESCRIPTION CX10 CX12 Foot Positioner - Small 996615 996615 Calf Panel Foot Positioner - Small 996616 996616 Foot Positioner - Medium Foot Positioner - Medium 996617 996617 Foot Positioner - Large 996618 996618 Foot Positioner - Large Foot Securement Strap 996619 996619 Foot Securement Strap Qty Calf Panel 1 INSTRUCTIONS Cruiser 10 Calf Panel 1 3 Foot Securement Strap Item Description 996619 Cruiser 10 2 Foot Positioners 1 2 1 996619 1. Lay Calf Panel flat and unfasten the velcro straps. PART NUMBERS Velcro straps around CX10 CX12 2. AttachCX14 CX16Footrest Extension CX18 Tube. 996615 9966153. Position 996615 996615 996615 Calf Panel across chair and attach Velrco® Straps around opposite Footrest CX14 CX16 CX18 996616 996616 996616 996616 Extension Tube. 996615 996615 996616 996615 996616 996616 996616 996617 996617 996617 996617 996617 996617 996617 996617 996618 996618 996618 996618 996618 996618 996618 996618 996619 996619 996619 996619 996619 996619 996619 996619 Footplate 3 1 Foot Straps Positioners - Pair 2 Foot Straps Positioners - Pair 1 1. Foot Positioners may be criss-crossed over the foot to secure the whole foot or can be converted into simple ankle straps. # 996616 Item Description 1 1 Qty Foot Positioners - Small 1 2 # 996617 Item Description 1 Qty Foot Positioners - Medium 1 Footplate Footplate # 996618 Item Description 1 2. To attach foot positioner, thread strap through footplate then bolt strap to underside of footplate 3 Qty Foot Positioners - Large 1 Footplate Securement Straps Footplate Securement Straps # 996619 Item Description 1 1. The securement strap holds indi vidual footplates together to prevent them from flipping up and down. 2. To secure the footplates, buckle the left and ri ght strap together. Qty Footplate Footplate Securement Strap 1 1 3 86 www.convaid.com Footplate 888-Convaid (266-8243) 87 INSTRUCTIONS CX14 CruiserDESCRIPTION 10 ACCESSORIES Headrest Cover (Canopy) Extended Headrest Cover - no Windows (Canopy) Extended Headrest Cover - with Windows (Canopy) Headrest Cover (Canopy) # 995922 PART NUMBERS CX10 CX12 995922 996022 995923 996023 995924 996024 1 CX16 996222 996223 996224 Attach Canopy 1 Item Description 996122 996123 996124 Cruiser 10 CX18 996322 996323 996324 1. Remove Canopy from box. 2 Qty Headrest Cover (Canopy) 1 2. Align plastic Canopy Retaining Clips 3 with upper tubing on back of the chair. Push on clips with the ball of your hand unti l they snap into place. 1 Headrest Cover (Canopy) Caution: Keep fingers away from moving parts. 2 Extended Headrest Cover - No Windows (Canopy) 3. To open, grasp top of Canopy and push forward and rotate downward. 3 Extended Headrest Cover - with Windows (Canopy) 4. To close the Rear Flap of Canopy, attach the Velcro® strap to Velcro® receiving patch on the edge of the Canopy Hood. 5. To fold, repeat above steps in reverse order. DESCRIPTION Headrest Cover (Canopy) Extended Headrest Cover - no Windows (Canopy) Extended Headrest Cover - with Windows (Canopy) PART NUMBERS CX10 CX12 995922 996022 995923 996023 995924 996024 CX14 996122 996123 996124 CX16 996222 996223 996224 CX18 996322 996323 996324 Extended Headrest Cover - No Windows (Canopy) 1 # 995923 12 ver (Canopy) Item Description 1 3 Qty Extended Headrest Cover - No Windows (Canopy) 1 eadrest Cover - No Windows (Canopy) eadrest Cover - with Windows (Canopy) DESCRIPTION Headrest Cover (Canopy) Extended Headrest Cover - no Windows (Canopy) Extended Headrest Cover - with Windows (Canopy) PART NUMBERS CX10 CX12 995922 996022 995923 996023 995924 996024 CX14 996122 996123 996124 CX16 996222 996223 996224 CX18 996322 996323 996324 Extended Headrest Cover - With Windows (Canopy) # 995924 2 13 Item Description 1 88 Qty Extended Headrest Cover - With Windows (Canopy) 1 www.convaid.com 888-Convaid (266-8243) 89 ACCESSORIES Cruiser 10 Mosquito Net 1 Mosquito Net Cruiser 10 Mosquito Net # 996623 Item Description INSTRUCTIONS 1 Qty 1 1. Take the top of the mosquito net and wrap it around the top of the canopy. You can identify the top of the mosquito net by the two black ties. 2. Arrange the mosquito net around the wheelchair and pull the bottom of the mosquito net to wrap around the footplate. 3. Find the two Velcro® straps on the right and left side of the mosquito net. 4. Secure mosquito net to wheelchair by wrapping Velcro® straps around each side of wheelchair frame. NOTE: For smaller size wheelchairs, the Velcro® straps may connect to each other behind the chair for a tighter fit. Available in two sizes: Small – fits chair sizes 10-14 Large – fits chair sizes 16-18 Rain Cover Rain Cover # 996625 1. Take the top of the rain cover and wrap it around the top of the canopy Item Description 1 Rain Cover Qty 1 1 2. Arrange the rain cover around the wheelchair and pull the bottom of the rain cover to wrap around the footplate 3. Find the two Velcro® straps on the right and left side of the rain cover. 4. Secure rain cover to wheelchair by wrapping Velcro® straps around each side of wheelchair frame. NOTE: For smaller size wheelchairs, the Velcro® straps may connect to each other behind the chair for a tighter fit. Available in two sizes: Small – fits chair sizes 10-14 Large – fits chair sizes 16-18 90 www.convaid.com 888-Convaid (266-8243) 91 Cruiser 10 ACCESSORIES Saddle Bags INSTRUCTIONS Cruiser 10 Saddle Bags # 996620 1. To install, insert Front Button Strap into opening in Mesh Seat Bottom and over Seat Tube. 2. Verify the strap is in front of the Seat Tube Retaining Bolt, then snap button shut. Kit Includes Item Description 1 Saddle Bag Qty 3. Wrap Rear Button Strap around Seat Tube and snap shut. 2 1 Close-up 92 www.convaid.com 888-Convaid (266-8243) 93 3 Extended Headrest Cover - with Windows (Canopy) Wheelchair Travel Bag 1 Wheelchair Travel Bag Qty Wheelchair Travel Bag CX14 CX16 996122 996123 996124 996222 996223 996224 CX18 996322 996323 996324 This wheeled travel bag is great for transporting your chair on planes, trains or buses. Constructed of heavy duty Cordura fabric, it comes with two-way zippers, pull handles at both ends and an adjustable carrying strap. One size fits most chairs. Available in black only. 1 1 Cruiser 10 PART NUMBERS CX10 CX12 995922 996022 995923 996023 995924 996024 DESCRIPTION Headrest Cover (Canopy) Extended Headrest Cover - no Windows (Canopy) Extended Headrest Cover - with Windows (Canopy) # 996621 Item Description INSTRUCTIONS Cruiser 10 ACCESSORIES 2 3 1 Headrest Cover (Canopy) 2 Extended Headrest Cover - No Windows (Canopy) 3 Extended Headrest Cover - with Windows (Canopy) Under Seat Storage Basket # 995937 Item Description 1 Under Seat Storage Basket PART NUMBERS DESCRIPTION Headrest Cover (Canopy) Extended Headrest Cover - no Windows (Canopy) Extended Headrest Cover - with Windows (Canopy) Qty 1 CX10 CX12 CX14 CX16 CX18 Under Seat Storage Basket Instructions 995922 995923 995924 996022 996023 996024 996122 996123 996124 996222 996223 996224 996322 996323 996324 1. Connect Center Button Strap by looping it over Rear Cross Brace and snapping button to back of basket. 1 2 2. Loop Side Button Strap over Chair Tubing (just 3 above the Rear Axle Assembly), and snap button shut. Repeat for opposite side. 1 3. Loop Front Button Strap over Chair Tubing (just above Front Cross Brace Mount), and snap button shut. ten Ex Ex s( ow w ind W indo ) No py W no er th wi v Ca r( Co er v ve st Co Co dre st ea rest re d H ad ad de He He ten ded 2 3 Utility Bag # 996622 Utility Bags Instructions 1 11 Item Description 1 To attach: Hook clasps onto straps. Caution: Do not overload bag. ER MB NU 0 RT CX1 2 PA 59 99 5 99 99 www.convaid.com 1 The Utility Bag attaches to the back of the chair, but can be removed and converted to a tote bag. ) py no py) N Ca no IO s ( Ca PT ow s ( RI ind ow SC W ind DE y) W no p no ver - with Ca r ( t Co ver s ve o Co dre t C st Hea res re d ad ed ea He end d H t e Ex end t Ex 94 Utility Bag Qty 888-Convaid (266-8243) 95 Cruiser 10 ACCESSORIES Frame Armrest Cover - Pair INSTRUCTIONS Cruiser 10 Frame Armrest Cover - Pair # 994764 1. Using a blade, remove the existing foam cover. 2. Unzip the new armrest cover and wrap around the front leg tube. 3. The zipper of the armrest cover should be facing downward. Kit Includes Item Description 1 CX Frame Armrest Cover w/Zipper 5” Lg Qty 4. Zip the armrest cover up. 2 Assembled 1 Close-up 96 www.convaid.com 888-Convaid (266-8243) 97 Cruiser 10 ACCESSORIES Anti-Tip Tube - Pair INSTRUCTIONS Cruiser 10 Anti-Tip Tube - Pair # 995688 1. To install the Anti-Tip Tubes, align the tube with the end of the round frame tubing located next to the rear wheel. 2. Push the detent pin while positioning the Anti-Tip Tube onto the round frame tubing and push until the “release button” pops through the hole located on the Anti-Tip Tube. Kit Includes Item Description 1 2 Qty CX-10 Anti-Tip Assembly, LH 1 CX-10 Anti-Tip Assembly, RH 1 3. Repeat steps 1 & 2 for opposite side. 4. To remove the Anti-Tip Tubes, perform above steps in reverse order. Assembled 1 2 Close-up 98 www.convaid.com 888-Convaid (266-8243) 99 2830 California Street, Torrance, CA 90503 USA 888.266.8243 | 310.618.0111 | Fax 310.618.2166 [email protected] | [email protected] www.convaid.com PBCX10-ENG-11162015 Printed in U.S.A.