Transcript
CS-1VGA-A-HDMI
VGA & Digital (S/PDIF) or Analog Audio to HDMI Scaler Converter
PRELIMINARY DATASHEET
CONVERTER
VGA & Digital (S/PDIF) or Analog Audio to HDMI Scaler Converter EMCORE’s CS-1VGA-A-HDMI provides a professional way to convert analog PC video (VGA) with either digital audio (S/PDIF) or stereo analog audio to digital HDMI in real time. With this module, VGA devices such as PC with S/PDIF or stereo analog audio can readily connect to an HDMI TV. With such a convenience, presentations, demonstrations, or digital signage become easier and more cost effective. The CS-1VGA-A-HDMI ensures that architects, integrators, installers and
c-linx series Features
end-users are presented with more options than ever before for designing, installing and operating in an environment that can easily adapt to multiple video formats.
Supported resolutions: 480p, 720p, 1080i, 1080p/60Hz
Operation Approach
Supports up to 24-bit color depth
Method A: Push-in Button
Support stereo analog and digital (S/PDIF) audio outputs
Operation control via push-in button with On Screen Display control interface, IR remote control,
Down
or IR remote control through mini-USB
Maximum pixel rate : 165MHz
Deinterlacer supported
Supports noise reduction and video enhancement features
Over / under scanning adjustable
Video H/V mirror supported
Active video area adjustment supported
USB firmware upgradable for expanding
Up
Menu / Enter
Method B: IR Remote Control
compatibility
Wall-mount housing design for easy installation
Applications
Broadcast Studios
Houses of Worship
CATV Head-ends
Higher Education
© 2013 Emcore Corporation. REV 2013.10.21
626 293 3400
[email protected]
www.emcore.com/opticomm
EMCORE reserves the right to change the design or specifications of the product at any time without notice. EMCORE and the EMCORE logo are trademarks of EMCORE Corporation.
CS-1VGA-A-HDMI
VGA & Digital (S/PDIF) or Analog Audio to HDMI Scaler Converter
PRELIMINARY DATASHEET
CONVERTER
Operation Approach Method C: IR Remote Control through Mini-USB port
1
COM Port Selection
2
COM Port Detection Button
3
Output Setup Button
4
Image Button
5
Adjustment Button
6
System Button
7
Input / Output Resolution Info
8
Refresh Input / Output Resolution Info Button
9
Output Quick Selection Button
© 2013 Emcore Corporation. REV 2013.10.21
626 293 3400
[email protected]
www.emcore.com/opticomm
EMCORE reserves the right to change the design or specifications of the product at any time without notice. EMCORE and the EMCORE logo are trademarks of EMCORE Corporation.
CS-1VGA-A-HDMI
VGA & Digital (S/PDIF) or Analog Audio to HDMI Scaler Converter
PRELIMINARY DATASHEET
CONVERTER
Ordering Information
Video
Model
Description
Specifications
Values
CS-1VGA-A-HDMI
VGA and Digital (S/PDIF) or Analog Audio Scaler Converter to HDMI, stand-alone with power supply
Inputs
1x VGA + 1x RCA
Outputs
1x HDMI
Frequency Bandwidth
165MHz
VGA connector
HD-15 [15-pin D-sub female]
HDMI connector
HDMI [19-pin female]
USB connector
Mini B
Connection Diagram
Audio Specifications
Values
Audio Support
Stereo PCM (48KHz only)
Inputs
1x Stereo
General
Input Panel
Output Panel
1. S/PDIF AUDIO IN: connect to digital S/PDIF audio source
6. Mini USB: Mini-USB port for 5V DC & control port
2. DIP SWITCH: For firmware update
7. STEREO AUDIO IN: connect to analog stereo audio source
ON [h]: firmware update mode OFF [i]: normal mode 3. LED INDICATOR: [green]: signal indicator LED
Specifications
Values
Input Power
5V 2A DC
Power Consumption
5w max
Weight
8.5oz [241g]
Dimensions
3.1” x 3.3” x 1.2” [79 x 84 x 27mm]
Operating Temperature
0~40°C
Storage Temperature
-20~60°C
Relative Humidity
20~90%
Warranty
1 Year
8. HDMI OUT: Connect to a HDMI display with a HDMI male-male cable here. 9. VGA IN: connect to a VGA source
[red]: power indicator LED. 4. IR SENSOR: IR sensor for receiving the IR commands from IR remote 5. PUSH BUTTON [LEFT]: Down Button
Compliance
[MID]: Up Botton [RIGHT]: Menu/Enter Button
© 2013 Emcore Corporation. REV 2013.10.21
626 293 3400
[email protected]
www.emcore.com/opticomm
EMCORE reserves the right to change the design or specifications of the product at any time without notice. EMCORE and the EMCORE logo are trademarks of EMCORE Corporation.
