Cs 24-4 L 1×4 Hdmi 4k2k Splitter

Transcript

INTRODUCTION: CS 24-4 L 1×4 HDMI 4K2K Splitter Quick Installation Guide It distributes the input of the HDMI signal into the several identical outputs simultaneously. The series of this product has the ability of buffering and amplifying. Each amplifier splitter’s output can achieve long distance transmission of HDMI signal. When two or more products are cascaded, they can create a larger distribution and longer in length. APPLICATIONS: ● Simultaneously display one HDMI source on two TVs / projectors ● Showroom display ● University lecture hall display ● Retail sales display FEATURES: ● Easy to Use: Install in seconds, no need of setting. ● Integrated HDCP decryption / encryption engines which are compliant with HDCP Rev 1.4 Specification. ● Cascaded: Large distribution achieved by cascading the HDMI Amplifier Splitter. ● Supports Standard Audio, DSD Audio and HD (HBR) Audio. ● Supports resolutions up to ultra HD 4Kx2K (3840x2160@60Hz YUV 4:2:0 / 3840x2160@30Hz YUV 4:4:4) ● Supports Full 3D PACKAGE CONTENTS: ● 1 set 1×4 HDMI 4K2K Splitter ● 1×5V DC Power Supply Adaptor ● User Manual -1- SYSTEM REQUIREMENTS: ● HDMI equipped source devices such as a DVD / Blu-ray play with HDMI cables or DVI to HDMI cables ● HDMI equipped displays (TVs or monitors) with HDMI cables -2- CONNECTION DIAGRAM: PANEL DESCRIPTIONS: Front Panel OPERATION: Rear Panel Power Switch: The power switch turns the unit on and off. The LED will illuminate to indicate that the switcher is ON POWER LED: The power LED will illuminate when the unit is powered. INPUT LED: The input led will illuminate when connect to a HDMI source. LINK LEDs: These LEDs will illuminate when the HDMI outputs are connected to the display with signal display on screen. HDMI INPUT: Connect the input port to the HDMI or DVI output of your source equipment such as DVD player or set-top box. HDMI OUTPUT: Connect each of the output ports to the HDMI display for simultaneous HDMI distribution. 5V/DC : Connect the 5 V/DC power supply into the splitter and plug the adaptor to AC wall outlet. -3- 1. Connect the HDMI cable from the HD source to the input port of this HDMI Splitter. 2. Connect the HDMI cables from your displays (monitor or projector) to the outputs of this Splitter. 3. Plug the 5VDC power supply into this HDMI Splitter. 4. Turn on the power then the HDTV signal will be distributed to each HDTV display. SPECIFICATIONS: Input Video Signal: Input DDC Signal: Maximum Resolution: DTV / HDTV: Interlaced (50 & 60Hz): Progressive (50 & 60Hz): Size: Operating Temperature: Operating Humidity: External Power Supply: 0.5 -1.0 volts p-p 5 volts p-p (TTL) 4K2K@60Hz 480i/576i/480p/576p/720p/1080i/ 1080P/2160P 480i,576i,1080i 480p,576p,720p,1080p,2160p 95 x 82 x 24,5 mm 0° to +40° 10% to 85 % RH (no condensation) 5V DC Note: When displaying a 3D signal with a higher bandwidth than 225MHz or a 4K2K resolution source, a High Speed HDMI cable is required. -4-