Transcript
B/W Progressive Scan CCD Video Camera
• 1/1.8" Progressive Scan CCD Image Sensor with Square Pixel ICX274AL-A • High Resolution 1628 ( H) x 1236 (V) UXGA • High-speed draft readout 48fps • CameraLink Interface • Electronic Shutter • Compact and Light Weight • Application • Machine vision • Factory automation • Quality control
Progressive Scan Camera
CS 3970CL
Technical Data Type Image sensor Video output pixels Unit pixel size Frame rate Illumination Video output Data Readout mode
Gain Gamma correction Power source Power consumption Electronic shutter spec All pixel readout Partial scan High-speed draft readout RTS (Random Trigger Shutter)
Multiple-shutter
CS 3970CL 1/1.8" Interline CCD Type: ICX274AL-A 1628 (H) x 1236 (V) 4.4 (H) x 4.4 (V) µm (Square pixel) 15, 30 or 48 fps Standard: 400lx, F 8, 3000K Minimum: 2lx (F 1.4) (GAIN MAX, all pixel readout, video level 50%) Compliant with the camera link standard. 12 / 10 / 8 bit switching All pixel readout: Approximately 15 fps / 1628(H) x 1236(V) Partial scan: Approximately 30 fps / 1628(H) x 552(V) High-speed draft readout: Approximately 48 fps / 1628(H) x 309(V) 0 to +12 dB (512 levels) (initial factory setting: 0 dB) OFF(Gamma= 1.0) fixed DC12 V ± 10% (ripple 50 mV(p-p) or less) Approx. 230mA
1/15 to 1/35000 s (1250 levels) 1/30 to 1/35000 s (625 levels) 1/48 to 1/35000 s (313 levels) ON/OFF switching (initial factory setting: OFF) Fixed mode: The exposure time depends on the shutter speed setting. Pulse width mode: The exposure time depends on the pulse width. ON/OFF switching (initial factory setting: OFF) Exposure by TRIG input, readout by MULTI input. * Enabled when random trigger shutter is ON.
Internal sync signal spec Driving frequency Scanning frequency All pixel readout Partial scan High-speed draft readout
Horizontal :18.750 kHz, Vertical :15.000 Hz Horizontal :18.750 kHz, Vertical :30.000 Hz Horizontal :15.000 kHz, Vertical :47.293 Hz
Input signal spec TRIG Signal level (DC IN input) Polarity Pulse width MULTI Polarity Pulse width
Camera link I/F and DC IN connector input TTL level Positive/Negative polarity switching possible (initial factory setting: Negative) 53.3µs or more Camera link I/F input Negative polarity 53.3µs to 10 ms
Output signal spec WEN Signal level Polarity Pulse width
DC IN connector output 4 V (p-p) Positive polarity Approx. 53.3µs
Mechanical spec External dimension Weight Lens mount Flange back
54mm (W) x 43mm (H) x 59mm (D) Approx. 150g C-Mount 17.526 mm
Operating Ambient condition Performance assurance Operating assurance
Temperature from 0 to 40°C / Humidity from 10 to 90% (no condensation) Temperature from -5°C to 45°C / Humidity 90% or less (no condensation)
36.000 MHz
Typical spectral response The lens characteristics and light source is not reflected in the table.
Applicable safety standards EMC (Electro-Magnetic Compatibility) EMI (Electro-Magnetic Interference) EMS (Electro-Magnetic Susceptibility) FCC
EN61000-6-4 / 2001 EN61000-6-2 / 2001 FCC Part 15 Subpart B class A
Communication specification Communication speed Data bit Parity Stop bit Parity bit Handshake
9600/19200/38400 bps None 8 1 None None
Connector Connector (camera side) Plug (cable side)
for Power Supply and sync input/output DC IN HR10A-10R-12PB HR10A-10P-12S
CS3970CL/07-2005/S.F-N.
Outline
NEW ELECTRONIC TECHNOLOGY Vertriebs-GmbH Lerchenberg 7 • D 86923 Finning, Germany • Phone: +49(0)88 06 - 92 34-0 • Fax: +49(0)88 06 - 92 34-77 E-mail:
[email protected] NET USA, Inc. 3037-45th Street • Highland, IN 46322 • Phone: (219) 934-9042 • Fax: (219) 934-9047 E-mail:
[email protected]
www.net-gmbh.com
