Transcript
9-1/2" MAX.
23-1/2" MIN
Junction box location Cutout depth
CT9070SH
9-1/2" M
23-1/2" MIN
Junction box 22" to French-Door GE Cafe™ Series 30 in. Built-In Single Convection Wall Oven location bottom of
F
junction box
Conduit
F
width DIMENSIONS AND INSTALLATION INFORMATIONCutout (IN INCHES) 28-1/2" MIN. 40" 22" to 28-5/8" MAX. MOST 30" WALL CABINETS CAN BE USED bottom of WITH THIS UNIT. junction box Conduit Cutout width 28-1/2" MIN. 28-5/8" MAX.
40" ovens are not approved for NOTE: These
D installations. Cabinets installed stackable adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating. D
9-1/2" MAX.
A
B
Door handle protrudes 2-1/2" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.
C A B C
F
Cutout height 27-1/4" MIN. 27-5/16" MAX.
Cutout height 27-1/4" MIN. 27-5/16" MAX.
Conduit 40"
E
Recommended cutout location from floor Recommended 16-1/4" MIN. cutout location 32-1/2" MAX.
Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions. INSTALLATION INFORMATION: Before installing, consult installation instructions packed with product for current dimensional data.
30''
Conduit 40"
E
Cutout depth 23-1/2" MIN
Junction box location 22" to bottom of junction box
D
Cutout width 28-1/2" MIN. 28-5/8" MAX.
D
A B C
from floor 16-1/4" MIN. 32-1/2" MAX.
30'' 30''
KW RATING 2 x 4 or
equivalent 240Vrunners 4.5 level with of cutout 2 x 4bottom or 208V equivalent runners and flush with3.4 sides of cutout level with bottom or solid bottom floor. BREAKER SIZE of cutout
bs.)
rt 200 lbs.)
and flush with sides of cutout 240V 20 Amps or solid bottom floor. 208V 20 Amps
CT9070 CT90T0 Cabinet ACabinet – Overlap of oven at top of cutout B –AOverlap ofofoven side of edges of cutout – Overlap ovenover at top of cutout C –BOverlap of oven at bottom ofedges cutout – Overlap of oven over side of of cutout Oven C – Overlap of oven at bottom of cutout DOven – Install depth – Installheight depth with trim E –DOverall E – Overall height with trim F – Overall width F – Overall width
30"
CT9070 1-1/4" 30" 3/4" 1-1/4" 1-1/4" 3/4" 1-1/4"
CL
CL
2 x 4 or equivalent runners 2 x 4 or level with bottom of cutout equivalent runners and flush with sides of cutout level with bottom of cutout Cabinet or solid bottom floor. and flush with sides of cutout or solid bottom floor.
Suitable
Suitable bracing bracing to support 200 lbs.)(must support 200 lbs.) 23-1/2"to support (must support runners runners
23-1/2" 28-5/8" 28-5/8" 29-3/4" 29-3/4"
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000.
C
A – Overlap of oven at top of cutout B – Overlap of oven over side of edges o C – Overlap of oven at bottom of cutou Oven D – Install depth E – Overall height with trim F – Overall width
Listed by Underwriters Laboratories
Specification Revised 5/15
CT9070SH
GE Cafe™ Series 30 in. Built-In French-Door Single Convection Wall Oven DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
INSTALLATION TO ADJACENT
NOTE: This model is not approved for installation below a countertop or in combination with a separate cooktop. The minimum installation height from the floor is 16-1/4".
INSTALLATION TO ADJACENT COUNTERTOP COUNTERTOP AND CABINET DOORS AND CABINET DOORS INSTALLATION TO ADJACENT COUNTERTOP AND CABINET DOORS
NOTE: A minimum gap of 14" from either side of the wall oven to an adjacent 45 or 90 cabinet, drawer or was is required to avoid interference with the opening of the doors. The handles protrude 2-1/2" from the door face.
If Y = 0.0” then X = 0.0” Otherwise, X = Y + 1.0” (2.5 cm) Min.If Y = 0.0” then X = 0.0” Otherwise, X = Y + 1.0” (2.5 cm) Min.
X
Countertop
X
NOTE: Countertops may need to be notched on either side of the wall oven to avoid interference with the opening of the doors.
Y Cabinet Door
Y
Installation information: Before installing, consult installation instructions packed with products for current dimensional data and for alternate installation options. THIS MODEL IS NOT APPROVED FOR FLUSH-MOUNT INSTALLATION
Countertop
Cabinet Door
TOP VIEW
16”
Min. Oven Door Front Clearance
TOP VIEW
SIDE BY SIDE INSTALLATION FRONT VIEW OF CUTOUTS SIDE BY SIDE BYSIDE SIDE INSTALLATION INSTALLATION
FRONT CUTOUTS If both ovens are French Door models, then 30” OF min. CUTOUTS FRONTVIEW VIEW If the second oven is a drop down door model, then 14” min. If both ovens are French Door models, then 30” min. 1/2” door model, then 14” If the second oven is a drop 9down
14” Min. Oven Door Side Clearance (Both Sides) min.
16” Min. Oven Door Front Clearance
14” Min. Oven Door Side Clearance (Both Sides)
9 1/2”
ELEC.
ELEC.
5 1/4”
ELEC.
Junction box location (may also be located in adjacent cabinet.)
ELEC.
5 1/4”
Junction box location (may also be located in adjacent cabinet.)
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000.
Specification Revised 5/15
CT9070SH
GE Cafe™ Series 30 in. Built-In French-Door Single Convection Wall Oven FEATURES AND BENEFITS rench door design – Inspired by commercial kitchen designs, F precision engineering allows for one-handed opening of both oven doors at the same time rue European Convection with Direct Air – Bakes evenly as T warm air blows from the top in and around bakeware lectronic dial controls – The glass touch display and ergonomic E control knobs are easy to operate and clean iFi Connect – Wirelessly control oven functions from W your smartphone rogressive halogen oven lighting – See what you’re baking P with lights that slowly illuminate the oven elf-clean with Steam Clean option – Clean your oven the S way you want elf-clean heavy-duty roller rack – Easily access items with S a rack that glides smoothly en-pass dual broil element – Large and small dishes brown T evenly with two, full-coverage elements en-pass bake element – Even baking is assured with heat T that covers more surface area 5.0 cu. ft. oven capacity – Cook more dishes at once Model CT9070SHSS – Stainless Steel
CT9070
Specification Revised 5/15
