Transcript
www.ctcsolutions.com.au
CTC OBD2/4 CTC Solutions OBDII 4G Vehicle Tracking Device
Compact Design, Plug and Play Unique engine start cutout RFID Operator ID With Bluetooth 2.0/4.0 Low energy(Optional) Real Time Vehicle Status Monitoring from OBD Port’s Wide Operating Voltage Range 8V to 32V DC
The CTC OBDII vehicle tracking device is a compact design allows easy installation. Enable easily connected various mobile devices to realize extended functionality, like as iOS, Androids etc. The CTC OBDII is an enhanced OBD GPS tracker and integrated a WIFI function, which adopted GPRS Networks and WIFI dual-mode wireless communication, can satisfy user's more options and requirements of communication. As well as support unique engine cut OBD GPS Tracking device. Its built-in 3-axis accelerometer allows motion detection and extends backup battery life. Its GPS receiver has superior sensitivity and fast time to first track driver behavior detection and location. Its quad baud GPRS/GSM/NextG subsystem supports 850/900/1800/1900 MHz allowing the CTC OBDII location to be monitored in real time or periodically tracked by a backend server and mobile devices. The low-power consuming CTC OBDII optimizes network connectivity performance by a high efficiency innovative antenna design. Supporting all vehicle engine OBD protocols and disconnect alert feature using an on-board backup battery. The protocol supports a wide variety of reports including emergency, geo-fence boundary crossings, driving behavior, low battery and scheduled GPS position and more.
Advantages:
RTU OBDII connectivity, simple to install, easy to use.
Quad band modem, 850/900/1800/1900 MHz.
U-blox 6M GPS module with A-GPS.
100% Internal Antenna’s
Build in WIFI support 802.11 b/g/n
Internal Immobilizer for anti-theft.
Internal 3-axis accelerometer.
Supports all OBDII protocols like j1939 etc.
8 types driver behavior detect.
Tracking by time, distance, course and status.
Geo-fence (Circl, Rectangular and Polygon).
FOTA (Firmware updating via GPRS or WIFI from FTP server).
Auto APN and time zone identification.
Voice monitor.
Network Specifications Frequency
Quad band:850/900/1800/1900MHz
GPRS multi-slot class 12 GPRS
GPRS mobile station class B
GSM850/NextG 3&4/GSM Max Out RF Power
Receiver
900: 33.0±
2 dBm
DCS/PCS: 30.0±2 dBm Class Ⅱ RBER 2% (-107 dBm)
Sensitivity
GPS Modem Specifications
GPS Chipset
u-blox 6m GPS module Autonomous:-147 dBm
Sensitivity
Hot start
:-160 dBm
Tracking
:-162 dBm
Position
Autonomous:< 3m
Accuracy
SBAS
: 2.0m
Cold start
: 25s average
Warm start
:< 25s
Hot
:<1s
TTFF(Open Sky and AGPS)
start
Interface Specifications J1850 PWM J1850 VPW OBD Port
ISO 9141-2 ISO14230(KWP200) ISO15765-4(CAN)
GSM Antenna
Internal only
GPS Antenna
Internal only(25mm*25mm ceramic)
WIFI
802.11 b/g/n
SIM card
Normal
Indicator LED
GSM/NextG, GPS, OBD ,WIFI and Bluetooth
USB
Micro USB port for configurations, upgrading and debugging
I/O
1 digital output for engine cut 1 digital multi-function input(SOS,AD,RFID etc)
General Specifications
Dimensions
50mm(L)*50mm(W)*23mm(H), not include J1962 connector
Weight
About 50g
Backup Battery
Li-Polymer 3.7V 180 mAh
Power consumption
70mA(Active),10mA(Sleep),Max.<250mA
Operating Voltage
8V to 32V DC
Operating
-30℃ ~ +80℃ (without battery)
Temperature
-40℃ ~ +85℃ for storage (without battery)
Memory
16M(about 22000 records max.) 3-axes ±2g/±4g/±8g/±16g accelerometer
Sensor
Vehicle battery voltage Back battery voltage Temperature sensor
Geo-Fence
5 Geo-Fences(Circlar,Rectangular and up to 32 points Polygon) Driver behavior Rough Braking Harsh course
Driver behavior
No warmup Long idle Fatigue driving rough terrain High RPM
WIFI Specifications Protocol Sensitivity
802.11 b/g/n -98 dBm
Security
Supports WPA/WPA2 and WPS modes
Antenna
Internal only
