Transcript
3M Abrasives Introducing Cubitron II Fibre Disc 982C ™
™
Speed up the entire grinding process. Start with Cubitron II fibre discs for heavy stock removal and use the same tool/accessories to quickly Speed up grinding process. Start Cubitron II fibre discs for heavy stockDesigned removal to and use blend the same quickly change overthe to entire Scotch-Brite Light Grinding andwith Blending Discs for your finishing needs. easily and tool/accessories refine a grade 36toscratch, change over Scotch-Brite Light Blending Discs needs. is Designed to easilyand blend and refine a grade 36 scratch, LGB discs cantoprepare surfaces forGrinding finishingand (where greater thanfora 3your mil finishing paint thickness being applied) eliminate the final DA sanding step. LGB discs can prepare surfaces for finishing (where greater than a 3 mil paint thickness is being applied) and eliminate the final DA sanding step. ™
™
™
™
Finishing Finishing Scotch-Brite™ Light Grinding and Blending Discs
Grinding Grinding 3M™ Cubitron™ II Fibre Disc 982C
Diameter Diameter 4 1/2" x 7/8" 4 1/2" x 7/8" TN* 4 1/2" x TN* 5" x 7/8" 5" x 7/8" TN* TN* 5" x GL* 5" x GL* 7" x 7/8" 7" x 7/8" TN* 7" x GL* TN* 7" x GL* 9" x 7/8" x 7/8" *Quick9" Change Attachments
3M™ Cubitron™ II Fibre Disc Grade Max RPM UPC982C (051141-) Grade Max RPM UPC (051141-) 36+ 13,300 27400-3 36+ 36+ 36+ 36+ 36+ 36+ 36+ 36+ 36+ 36+ 36+ 36+
13,300 13,300 12,000 12,000 12,000 12,000 8,600 8,600 8,600 8,600 6,600 6,600
27400-3 27425-6 27425-6 27401-0 27401-0 27404-1 27404-1 27406-5 27406-5 27402-7 27402-7 27405-8 27405-8 27407-2 27407-2 27403-4 27403-4
Min./Case Min./Case 25/100
25/100 25/100 25/100 25/100 25/100 25/100 25/100 25/100 25/100 25/100 25/100 25/100
*Quick Change Attachments
*Quick Change Attachments
3M™ Disc Pad Face Plates Pad Face Plates Diameter Face Type Max 3M™ RPM DiscHardness UPC (051141-) Diameter Type Max RPM HardHardness UPC (051144-) 4 1/2" Face Smooth 13,300 - Black 14270-5 81733-7 4 1/2" Smooth 13,300 Hard - Black 14270-5 5" Ribbed 12,000 Extra - Red 81732-0 Hard -Hard Black 81733-7 5" Ribbed 12,000 Hard Black- Red 80515-0 Extra-Hard 81732-0 7" Ribbed 8,600 Extra - Red 80514-3 Hard -Hard Black 80515-0 7" Ribbed 8,600 Hard Black- Red 81729-0 Extra-Hard 80514-3 9" Ribbed 6,600 Extra - Red 81728-3 Hard -Hard Black 81729-0 9" Ribbed 6,600 Extra Hard - Red 81728-3
and Blending Discs Diameter Scotch-Brite™ Grade Light Grinding Max RPM UPC (0480110-) Min./Case Diameter Max RPM UPC (0480110-) Min./Case HDGrade A CRS 10,000 60332-2 50 4 1/2" x 7/8" HD AA CRS CRS 60332-2 4 1/2" x 7/8" SD 10,000 60333-9 50 4 1/2" x 7/8" SD A CRS 10,000 60333-9 TN* HD 13,300 60348-3 50 HD AA CRS CRS 60348-3 4 1/2" x TN* SD 13,300 60349-0 50 4 5" 1/2" x TN* SD A CRS 13,300 60349-0 x 7/8" HD 10,000 60336-0 50 HD AA CRS CRS 60336-0 5" x 7/8" SD 10,000 60341-4 50 5" x 7/8" SD A CRS 10,000 60341-4 50 TN* HD 12,000 60350-6 HD AA CRS CRS 60350-6 5" x TN* SD 12,000 60351-3 50 5"xx7/8" TN* SD A CRS 12,000 60351-3 50 7" HD 6,000 60347-6 25 7" x 7/8" HD AA CRS CRS 6,000 60347-6 25 SD 60344-5 7" x 7/8" SD A CRS 6,000 60344-5 TN* HD 8,600 60352-0 25 HD AA CRS CRS 60352-0 7" x TN* SD 8,600 60353-7 25 x TN* 8,600 60353-7 25 *Quick7" Change Attachments SD A CRS
Min./Case Min./Case
Diameter Diameter 2 1/5"
25 10
42 1/ 2" 4 1/2" 2 1/2" 2 1/2"
10 10
3M™ Disc Pad Hub
3M™ Disc Pad HubUPC (051144-) Description UPC (051144-) Use withDescription all size face plates 45205-7 all face size face plates Use with 7" plates only Use larger plates Usewith with7"allorsize faceface plates, tool length or less Use shaft with all size 1/2" face plates, tool shaft length 1/2" or less
Min./Case Min./Case
45205-7 45190-6 45190-6 88743-9 88743-9
5/10 10
3M™ Disc Retainer Nuts Depth Depth 3/8"
3/8" 1/2" 1/2" 5/8" 5/8"
3M™ Disc Retainer Nuts Description UPC (051144-) Description UPC (051144-) Short tool shaft lengths 05622-4 Short tool Medium toolshaft shaftlengths lengths Medium toolshaft shaftlengths lengths Long tool Long tool shaft lengths
For more information visit our website 3M.com/abrasives For more information visit our website 3M.com/abrasives
Min./Case Min./Case
05622-4 05621-7 05621-7 05620-0 05620-0
Dare
10 10
to wear it out.
Product Use: All statements, technical information and recommendations contained in this document are based upon tests or experience that Product Use: statements, technical and recommendations contained in this areofbased testsinor experienceapplication, that 3M believes areAllreliable. However, manyinformation factors beyond 3M’s control can affect the use and document performance a 3Mupon product a particular 3M believes reliable.under However, many factors beyond control the use and performance of athe 3Mproduct productisinexpected a particular application, including theare conditions which the product is used 3M’s and the time can andaffect environmental conditions in which to perform. including thefactors conditions under which used and and the time anditenvironmental conditions which the is expected to perform. Since these are uniquely withinthetheproduct user’s isknowledge control, is essential that the user in evaluate the product 3M product to determine whether factors arepurpose uniquely within the user’s and of control, it is essential that the user evaluate the 3M product to determine whether itSince is fit these for a particular and suitable for theknowledge user’s method application. it is fit for a particular purpose and suitable for the user’s method of application. Warranty and Limited Remedy: Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual products, Warranty and Limited Remedy: otherwise in 3M’s product literature, inserts orIndividual product packaging for individual products, 3M warrants that each 3M productUnless meetsstated the applicable specifications at the time 3Mpackaging ships the product. products may have additional or 3M warrants that each 3M product meetsliterature, the applicable specifications at the time 3M ships product. Individual products may have additional or different warranties as stated on product package inserts or product packages. 3Mthe makes no other warranties, express or implied, including, different warranties stated warranty on product package inserts for or product packages. 3Mormakes no other warranties, implied, but not limited to, anyasimplied of literature, merchantability or fitness a particular purpose any implied warranty arisingexpress out of aorcourse of including, dealing, but not limited to,ofany implied of merchantability or fitness a particular purpose oraany impliedpurpose warrantyand arising out of courseapplication. of dealing, custom or usage trade. Userwarranty is responsible for determining whetherforthe 3M product is fit for particular suitable forauser’s usage of Userwithin is responsible for determining 3M product is fitand for seller’s a particular purpose and for user’s application. Ifcustom the 3Morproduct is trade. defective the warranty period, yourwhether exclusivethe remedy and 3M’s sole obligation willsuitable be, at 3M’s option, to replace If the 3M product is defective withinprice. the warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to replace the product or refund the purchase the product or refund the purchase price. Limitation of Liability: Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether Limitation of Liability: Except where prohibited by regardless law, 3M and will theory not be asserted, liable for any loss orwarranty, damage arising from the 3M product, direct, indirect, special, incidental or consequential, of seller the legal including contract, negligence or strict whether liability. direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Abrasive Systems Division 3M Center Systems Division Abrasive Building 223-6N-01 3M Center St. Paul, 223-6N-01 MN 55144-1000 Building www.3M.com/Abrasives St. Paul, MN 55144-1000 www.3M.com/Abrasives
9070849_3indop.indd 4 9070849_4pager.indd 9070849_3indop.indd 1 4
3M, Cubitron and Scotch-Brite are of Scotch-Brite 3M. 3M,trademarks Cubitron and are trademarks of 3M. Please recycle. Printed in U.S.A. © 3M 20 10. All Printed rights reserved. Please recycle. in U.S.A. Bolger 100101All 77rights reserved. 61-5002-8252-2 © 3M 2009. 61-5002-8252-2 61-5002-8252-2
8/24/09 10:27:20 AM 8/24/09 10:27:20 AM
9070849_3indop.indd 1
8/24/09 8/24/09 11:11:17 10:26:12AM AM
Metal
meets its match. New 3M Cubitron II Fibre Disc 982C ™
Cubitron II Fibre Disc
™
™
No matter how you cut it, Cubitron II Discs work harder
You work too long and too hard to settle for a disc that can’t keep up. Try the new Cubitron II Fibre disc 982C and start working with a product that cuts so fast and lasts so long, you may need a break before the disc does. So keep on grinding! Cubitron II Fibre Discs are made with revolutionary 3M precision-shaped ceramic grain technology, engineered with ultra-sharp, fast-cutting points that wear evenly, run cool and optimize mineral breakdown to maximize disc life.
Triangular-shaped grain (right image) is electrostatically oriented to form sharp peaks, each acting like individual cutting tools that wear evenly for superlong life and consistency. Projected Grinding Force
Put it to the test and see for yourself. 3M guarantees 982C will outlast your current fibre disc or you can return it for a full refund. ™
Product A
Total Total cutcut data data
982C 982C
Grams removed per minute Grams removed per minute
Grams removed Grams removed
Product Product A A
1200 1200
80 80
Product Product B B
1000 1000
60 60 40 40
Application
Material
Previous Disc Type
982C Results
Operator Comments
Weld (edge & flat)
carbon steel
ceramic, grade 36
2 - 3 times more life experienced by ALL operators
“Much better cut”
Flame cut
carbon steel
ceramic, grade 24
2 times life
“A lot better; cuts faster longer”
Weld prep (flat)
carbon steel
ceramic, grade 36
2 times life
“Don’t have to push as hard; tougher material”
Weld removal
carbon steel
ceramic, grade 36
4 hot welds/disc
“Cuts into a hot weld where other discs won’t”
Edge work
carbon steel
ceramic, grade 36
2 - 3 times life
“Got life from disc without having to push hard at the end”
800800
Product Product C C
600600
Product Product D D
Actual results will vary based on end user manufacturing processes.
400400
Faster FasterCut Cut
20 20 0 0
9070849_3indop.indd 2-3 9070849_4pager.indd 2
14 18 Grinding force (lbs) *Projected due to standardization of the data based on actual internal grinding force tests.
100100
2
600
982C removes as much stock with 14 lbs of force as the competitors remove with 20 lbs of force.
200
1400 1400
1 1
800
0
1600 1600
120120
982C
400
1800 1800 CutCut rate rate data data
Product B
1000
Faster cut rates with less pressure for longer periods of time provide you with: s )NCREASED PRODUCTIVITY s )NCREASED THROUGHPUT s ! MORE COMFORTABLE WORK ENVIRONMENT s ,OWER COSTGRIND
140140
Customer test results
1200
Cut (g/5 minutes)
Cubitron II leaves today’s ceramic technologies behind with increased cut rates and life
Multiple grading systems have been created as mineral technology evolves and Cubitron II abrasives are no exception. Engineered triangular shapes can’t be boxed into the screens currently used for grading. But you’ll see how this new mineral cuts with all the speed and life you’d expect from an ANSI 36, plus more. Since finish results depend on the mineral size, variations in applications, and operator technique, 3M field support is available to help refine any scratch on any metal.
Push yourself to the limit or let the disc do the work, either way, 982C removes an average of 40% more material than comparable fibre discs. Finish more parts with fewer discs regardless of grinding pressure.
™
Unique 36+ grade for a revolutionary product
Longer LongerLife Life
200200 0 0
3 3
5 5
7 7
9 9
11 11
13 13
15 15
1 1
Minutes Minutes
3 3
5 5
7 7
9 9
11 11
13 13
15 15
Minutes Minutes Internal Test Results: CAM, Weld Simulation
10:26:39 AM 8/24/09 11:11:19
Metal
meets its match. New 3M Cubitron II Fibre Disc 982C ™
Cubitron II Fibre Disc
™
™
No matter how you cut it, Cubitron II Discs work harder
You work too long and too hard to settle for a disc that can’t keep up. Try the new Cubitron II Fibre disc 982C and start working with a product that cuts so fast and lasts so long, you may need a break before the disc does. So keep on grinding! Cubitron II Fibre Discs are made with revolutionary 3M precision-shaped ceramic grain technology, engineered with ultra-sharp, fast-cutting points that wear evenly, run cool and optimize mineral breakdown to maximize disc life.
Triangular-shaped grain (right image) is electrostatically oriented to form sharp peaks, each acting like individual cutting tools that wear evenly for superlong life and consistency. Projected Grinding Force
Put it to the test and see for yourself. 3M guarantees 982C will outlast your current fibre disc or you can return it for a full refund. ™
Product A
Total Total cutcut data data
982C 982C
Grams removed per minute Grams removed per minute
Grams removed Grams removed
Product Product A A
1200 1200
80 80
Product Product B B
1000 1000
60 60 40 40
Application
Material
Previous Disc Type
982C Results
Operator Comments
Weld (edge & flat)
carbon steel
ceramic, grade 36
2 - 3 times more life experienced by ALL operators
“Much better cut”
Flame cut
carbon steel
ceramic, grade 24
2 times life
“A lot better; cuts faster longer”
Weld prep (flat)
carbon steel
ceramic, grade 36
2 times life
“Don’t have to push as hard; tougher material”
Weld removal
carbon steel
ceramic, grade 36
4 hot welds/disc
“Cuts into a hot weld where other discs won’t”
Edge work
carbon steel
ceramic, grade 36
2 - 3 times life
“Got life from disc without having to push hard at the end”
800800
Product Product C C
600600
Product Product D D
Actual results will vary based on end user manufacturing processes.
400400
Faster FasterCut Cut
20 20 0 0
9070849_3indop.indd 2-3 9070849_4pager.indd 2
14 18 Grinding force (lbs) *Projected due to standardization of the data based on actual internal grinding force tests.
100100
2
600
982C removes as much stock with 14 lbs of force as the competitors remove with 20 lbs of force.
200
1400 1400
1 1
800
0
1600 1600
120120
982C
400
1800 1800 CutCut rate rate data data
Product B
1000
Faster cut rates with less pressure for longer periods of time provide you with: s )NCREASED PRODUCTIVITY s )NCREASED THROUGHPUT s ! MORE COMFORTABLE WORK ENVIRONMENT s ,OWER COSTGRIND
140140
Customer test results
1200
Cut (g/5 minutes)
Cubitron II leaves today’s ceramic technologies behind with increased cut rates and life
Multiple grading systems have been created as mineral technology evolves and Cubitron II abrasives are no exception. Engineered triangular shapes can’t be boxed into the screens currently used for grading. But you’ll see how this new mineral cuts with all the speed and life you’d expect from an ANSI 36, plus more. Since finish results depend on the mineral size, variations in applications, and operator technique, 3M field support is available to help refine any scratch on any metal.
Push yourself to the limit or let the disc do the work, either way, 982C removes an average of 40% more material than comparable fibre discs. Finish more parts with fewer discs regardless of grinding pressure.
™
Unique 36+ grade for a revolutionary product
Longer LongerLife Life
200200 0 0
3 3
5 5
7 7
9 9
11 11
13 13
15 15
1 1
Minutes Minutes
3 3
5 5
7 7
9 9
11 11
13 13
15 15
Minutes Minutes Internal Test Results: CAM, Weld Simulation
10:26:39 AM 8/24/09 11:11:19
3M Abrasives Introducing Cubitron II Fibre Disc 982C ™
™
Speed up the entire grinding process. Start with Cubitron II fibre discs for heavy stock removal and use the same tool/accessories to quickly Speed up grinding process. Start Cubitron II fibre discs for heavy stockDesigned removal to and use blend the same quickly change overthe to entire Scotch-Brite Light Grinding andwith Blending Discs for your finishing needs. easily and tool/accessories refine a grade 36toscratch, change over Scotch-Brite Light Blending Discs needs. is Designed to easilyand blend and refine a grade 36 scratch, LGB discs cantoprepare surfaces forGrinding finishingand (where greater thanfora 3your mil finishing paint thickness being applied) eliminate the final DA sanding step. LGB discs can prepare surfaces for finishing (where greater than a 3 mil paint thickness is being applied) and eliminate the final DA sanding step. ™
™
™
™
Finishing Finishing Scotch-Brite™ Light Grinding and Blending Discs
Grinding Grinding 3M™ Cubitron™ II Fibre Disc 982C
Diameter Diameter 4 1/2" x 7/8" 4 1/2" x 7/8" TN* 4 1/2" x TN* 5" x 7/8" 5" x 7/8" TN* TN* 5" x GL* 5" x GL* 7" x 7/8" 7" x 7/8" TN* 7" x GL* TN* 7" x GL* 9" x 7/8" x 7/8" *Quick9" Change Attachments
3M™ Cubitron™ II Fibre Disc Grade Max RPM UPC982C (051141-) Grade Max RPM UPC (051141-) 36+ 13,300 27400-3 36+ 36+ 36+ 36+ 36+ 36+ 36+ 36+ 36+ 36+ 36+ 36+
13,300 13,300 12,000 12,000 12,000 12,000 8,600 8,600 8,600 8,600 6,600 6,600
27400-3 27425-6 27425-6 27401-0 27401-0 27404-1 27404-1 27406-5 27406-5 27402-7 27402-7 27405-8 27405-8 27407-2 27407-2 27403-4 27403-4
Min./Case Min./Case 25/100
25/100 25/100 25/100 25/100 25/100 25/100 25/100 25/100 25/100 25/100 25/100 25/100
*Quick Change Attachments
*Quick Change Attachments
3M™ Disc Pad Face Plates Pad Face Plates Diameter Face Type Max 3M™ RPM DiscHardness UPC (051141-) Diameter Type Max RPM HardHardness UPC (051144-) 4 1/2" Face Smooth 13,300 - Black 14270-5 81733-7 4 1/2" Smooth 13,300 Hard - Black 14270-5 5" Ribbed 12,000 Extra - Red 81732-0 Hard -Hard Black 81733-7 5" Ribbed 12,000 Hard Black- Red 80515-0 Extra-Hard 81732-0 7" Ribbed 8,600 Extra - Red 80514-3 Hard -Hard Black 80515-0 7" Ribbed 8,600 Hard Black- Red 81729-0 Extra-Hard 80514-3 9" Ribbed 6,600 Extra - Red 81728-3 Hard -Hard Black 81729-0 9" Ribbed 6,600 Extra Hard - Red 81728-3
and Blending Discs Diameter Scotch-Brite™ Grade Light Grinding Max RPM UPC (0480110-) Min./Case Diameter Max RPM UPC (0480110-) Min./Case HDGrade A CRS 10,000 60332-2 50 4 1/2" x 7/8" HD AA CRS CRS 60332-2 4 1/2" x 7/8" SD 10,000 60333-9 50 4 1/2" x 7/8" SD A CRS 10,000 60333-9 TN* HD 13,300 60348-3 50 HD AA CRS CRS 60348-3 4 1/2" x TN* SD 13,300 60349-0 50 4 5" 1/2" x TN* SD A CRS 13,300 60349-0 x 7/8" HD 10,000 60336-0 50 HD AA CRS CRS 60336-0 5" x 7/8" SD 10,000 60341-4 50 5" x 7/8" SD A CRS 10,000 60341-4 50 TN* HD 12,000 60350-6 HD AA CRS CRS 60350-6 5" x TN* SD 12,000 60351-3 50 5"xx7/8" TN* SD A CRS 12,000 60351-3 50 7" HD 6,000 60347-6 25 7" x 7/8" HD AA CRS CRS 6,000 60347-6 25 SD 60344-5 7" x 7/8" SD A CRS 6,000 60344-5 TN* HD 8,600 60352-0 25 HD AA CRS CRS 60352-0 7" x TN* SD 8,600 60353-7 25 x TN* 8,600 60353-7 25 *Quick7" Change Attachments SD A CRS
Min./Case Min./Case
Diameter Diameter 2 1/5"
25 10
42 1/ 2" 4 1/2" 2 1/2" 2 1/2"
10 10
3M™ Disc Pad Hub
3M™ Disc Pad HubUPC (051144-) Description UPC (051144-) Use withDescription all size face plates 45205-7 all face size face plates Use with 7" plates only Use larger plates Usewith with7"allorsize faceface plates, tool length or less Use shaft with all size 1/2" face plates, tool shaft length 1/2" or less
Min./Case Min./Case
45205-7 45190-6 45190-6 88743-9 88743-9
5/10 10
3M™ Disc Retainer Nuts Depth Depth 3/8"
3/8" 1/2" 1/2" 5/8" 5/8"
3M™ Disc Retainer Nuts Description UPC (051144-) Description UPC (051144-) Short tool shaft lengths 05622-4 Short tool Medium toolshaft shaftlengths lengths Medium toolshaft shaftlengths lengths Long tool Long tool shaft lengths
For more information visit our website 3M.com/abrasives For more information visit our website 3M.com/abrasives
Min./Case Min./Case
05622-4 05621-7 05621-7 05620-0 05620-0
Dare
10 10
to wear it out.
Product Use: All statements, technical information and recommendations contained in this document are based upon tests or experience that Product Use: statements, technical and recommendations contained in this areofbased testsinor experienceapplication, that 3M believes areAllreliable. However, manyinformation factors beyond 3M’s control can affect the use and document performance a 3Mupon product a particular 3M believes reliable.under However, many factors beyond control the use and performance of athe 3Mproduct productisinexpected a particular application, including theare conditions which the product is used 3M’s and the time can andaffect environmental conditions in which to perform. including thefactors conditions under which used and and the time anditenvironmental conditions which the is expected to perform. Since these are uniquely withinthetheproduct user’s isknowledge control, is essential that the user in evaluate the product 3M product to determine whether factors arepurpose uniquely within the user’s and of control, it is essential that the user evaluate the 3M product to determine whether itSince is fit these for a particular and suitable for theknowledge user’s method application. it is fit for a particular purpose and suitable for the user’s method of application. Warranty and Limited Remedy: Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual products, Warranty and Limited Remedy: otherwise in 3M’s product literature, inserts orIndividual product packaging for individual products, 3M warrants that each 3M productUnless meetsstated the applicable specifications at the time 3Mpackaging ships the product. products may have additional or 3M warrants that each 3M product meetsliterature, the applicable specifications at the time 3M ships product. Individual products may have additional or different warranties as stated on product package inserts or product packages. 3Mthe makes no other warranties, express or implied, including, different warranties stated warranty on product package inserts for or product packages. 3Mormakes no other warranties, implied, but not limited to, anyasimplied of literature, merchantability or fitness a particular purpose any implied warranty arisingexpress out of aorcourse of including, dealing, but not limited to,ofany implied of merchantability or fitness a particular purpose oraany impliedpurpose warrantyand arising out of courseapplication. of dealing, custom or usage trade. Userwarranty is responsible for determining whetherforthe 3M product is fit for particular suitable forauser’s usage of Userwithin is responsible for determining 3M product is fitand for seller’s a particular purpose and for user’s application. Ifcustom the 3Morproduct is trade. defective the warranty period, yourwhether exclusivethe remedy and 3M’s sole obligation willsuitable be, at 3M’s option, to replace If the 3M product is defective withinprice. the warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to replace the product or refund the purchase the product or refund the purchase price. Limitation of Liability: Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether Limitation of Liability: Except where prohibited by regardless law, 3M and will theory not be asserted, liable for any loss orwarranty, damage arising from the 3M product, direct, indirect, special, incidental or consequential, of seller the legal including contract, negligence or strict whether liability. direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Abrasive Systems Division 3M Center Systems Division Abrasive Building 223-6N-01 3M Center St. Paul, 223-6N-01 MN 55144-1000 Building www.3M.com/Abrasives St. Paul, MN 55144-1000 www.3M.com/Abrasives
9070849_3indop.indd 4 9070849_4pager.indd 9070849_3indop.indd 1 4
3M, Cubitron and Scotch-Brite are of Scotch-Brite 3M. 3M,trademarks Cubitron and are trademarks of 3M. Please recycle. Printed in U.S.A. © 3M 20 10. All Printed rights reserved. Please recycle. in U.S.A. Bolger 100101All 77rights reserved. 61-5002-8252-2 © 3M 2009. 61-5002-8252-2 61-5002-8252-2
8/24/09 10:27:20 AM 8/24/09 10:27:20 AM
9070849_3indop.indd 1
8/24/09 8/24/09 11:11:17 10:26:12AM AM
