Transcript
Touch screen VGA monitor
Manual of operation
Dear customere,
Thank you for purchasing our Mini Color TFT LCD monitor (touch scrson
for optional), this product employs advaned integrated circuits and cholcg quality TFT LCD modules.
{
lt owns a lot of super advantages: low
Power
consumption, good stability, no radiation, neat design, portablo, flaxibla mntrol keys and with VGA and AV input function. The Mini Color TFT LCD monltor
18
not only suitiable for VGA, VCD, DVD and GPS system of motorcars and shlpE,
but also used in various instrumentation and automatic controlled machlna display systems.
We wish you will enjoy your life better with our new Mini Color TFT LCD monitor.
ffi . 2. 3. '1
Please use the adapter attached in the arcessory Do not expose this product to direct sunlight, heat or humid conditions.
Keep away from strong light while using this prcduct so as to obtain th6
clearest and the most colorful picture.
#
4. 5.
Please avoid heavy impact or drop onto the ground. Do not use chmical solutions to clean this unit. Please simply wipe wlth a
clean soft cloth to keep the brightness of the surface.
6.
lf the product does not operate normally when the instructions ars followad.
Adiust only those controls that are covered by the instructions. lmproper adjustment of other controls may result in damage and will often require extensive
7.
Please be noticed that it hasn't inner adjust modules, Do not attempt to
modify or fix this unit. Contact qualified seruie personnel when any seruice is needed. This unit should never be opened for any reasons by no-professional.
1.
a
CONTENTS
a
Product description Description of monitor
RemotB 10
t1
a .
Menu
Oporatlon
12
---------6
Descrlptlon of
Picture
OSD in PC OSD in AV
mode--
I
(A)
-----------10 1
Logo
2
O:
Power on/off
3. aylpt 4.
: AV1/AV2IPC/HDMI switch.
lnfrared ray receiving window
5. A
: Subject selection key, or to adjust the brightness directly.
6. V
: 5g61gs1 selection key, or to adjust automatically at VGA
mode.
7. tEl[l! 8. (
: To activate OSD menu and lnfrared ray receiving window
: Decrease the volume level or to adjust settings on the set
menu
g. )>
: lncreases the volume level or to adjust settings on the set
menu
10.HDMl input jack (for high definition Multimedia jack) optional
11.OC12v lnputVoltage jack 12.
SKS
lnputjack
a
Connect the No.1 SKS input jack to the SKS input jack which is on the blok
Remoto controller
of the monitor
No.2 Black g-pin plug for VGA signal input (Connect it with No.1 Jack on picture 4) J.
No.3 Blackjack for DC12V power input
4.
No.4 Yellow RCAjack forVideo 1 input
5. No.5 6.
White RCA jack forAudio inPut
N0.6 Red RCAjack for video 2 input
Plcture 2:
1.O:
Poweron/off Picture 4 (VGA cabl6)
2.9:
MUrE
3.@:
To activata OSD msnu,
4.@:
Volume down or to adlust the value of setting function
function.
5.O:
volume up or to adjust the valu8 of setting function
Connect No.3 '1s-pin VGA signal input end to the VGA port of @mputer
6.O:
Selection key, to adjuBt ths brightnsss directly.
z.O:
Selection key, to ad,lust phase directly.
1
g-pin plug at picture 3 Connect No.1 Black g-pin jack with the No.2
2
Connect No.2 USB end to the USB port of computer for touch scrgon
a connection Connect the SKS input jack in supplied accessories to the SKS input iack
8.@:Aspect ratio switch,4 : 3/16:9
which is on the back of the monitor tightly, after make sure them suroly
o.@ ,
uP7 P91ry1 5*i1"n
connected together, then connect the other side of the SKS jack with
to.@
: nignuLeft switch
relevant jacks. Do them according to the following description: 2.
11.@ : ss;166 s;nnal betwesn AV1/AV2IPC/HDMI
Find black 9-pin plug (in picture 3) and the g-pin jack (in picture 4), put tho
two arrowheads mark of them on the same direction and connect thgm together Connect the VGAsignal input (in picture 4) to the VGA output port
a
at the back of computer, then tight screws. Connect the USB end with to the
Matched cable
touch screen function USB jack of the computer connect the yellow RCAjack with the video signal I 4. connect
the red RCAjack with the video signal 2
5. connect the white RCAjack with the audio signal
Picture 3 (AV cable) 4
6.
connectthe black jack with tho DC12V power jack
OSD in AV mode
7.When you choose HDI\ill as signal input, please connect the HDMI line with HDMI jack of tho dovico, and another end connect with HDMI signal. 8. When you use this unit, ploase use the DC adapter in supplied accessories.
For other reason to use other brand adapter, please note that the power consumption
of it should be no less than 10w and it must be
DCl2Vt10%
adapter.
2.
qualified
.
Menu Operation
I
U
and confirm 5uy pressing
" 1"t7"
" (V')'again
then push
after your adjust.
button, the blue light witt turn on, which means the unit is go into
working condition. (after 5 or 6 seconds, the director light will ofi.) lf press
tne " O"
button again, this unit change to standby state. lf press "iiE}ltJ"
button by remote controller at AV or PC state, you can enter into relevant OSD
on the unit or on the remote controller to sslecl
taa;ust)
(coro.)
power, then the unit will be in a standby state (the red light for power is on).
" O"
"
X
the items:
Do as the above description, connect relevant signals together and connect to
Press
V
You can press " 4"/"
Menu operation
.. Description of OSD OSD ln PC mode
!l
(Color)
Eil (oso)
E
(runction)
O
(souno),
on the unit or on the remote controllor,
to adjust the items. Push'iiEl{U" to exit the OSD
:
:
:
menu operation( please note that the OSD menus at AV or PC state are different) as following picture
OSD in PC mode
:
After enter into "Color" item of OSD, use
pusn"
{"1'}"to
"A"/"V"to
adjust.
x Brightness: To adjust the brightness. x Contrast: To adjust the contrast of image.
x
Color Temp : To adjust the contrast of Color Temp.
select and then
E
(osD)
,
Color temperature of OSD is adjustable. Press ""on the unit or on the remote controller to select "Color Temp", then you can choose to set color
X
temperature at first such as: 6500 Ks, 7500 Ks or 9300 Ks by
n
pressing"
"/"
V
Enslish
" . You can also adjust a color temperature that wants the
options "USER" then can adjust RED, GREEN and BLUE at will by
{'7"}"
pushing"
.
Language : 2 languages for OSD as below
with attain which want of the color value.
Note: when you select tho "USER" item a mini box will appear in the right
ffi14 +
:
X
X
H Position : To adjust the OSD position in horizontal.
X
V Position : To adjust the OSD position in vertical.
X
OSD Timeout : To adjust the clock.
X
Transparent : To adjust the level of transparent.
bottom corner of the OSD. As picture below.
X
(Adjus0
:
E
x
(Function):
Auto Config : To adjust automatically.lfthe auto-adjust is not satisfy
your request, you can adjust manually.
Reset : Back to original setting.
X
H Position : To adjust the picture in horizontal.
Display Ratio : To change the display ratio,16:9/4;3
x
V Position : To adjust the picture in vertical.
LR Rotation : To change the picture lefuright.
X
Phase : To adjust the phase.
UD Rotation : To change the picture up/ down.
X
Clock : To adjust the clock, make field and line synchronization.
lE
ffi
(souna)
x
:
English X H Position :
ffi14+ To adjust
:
{ the OSD position in horizontal
x
V Position : To adjust the OSD position in vertical.
X
OSD Timeout : To adjust the clock.
X
Transparent : To adjust the level of tmnsparent.
(Function)
:
(Color)
x Brightness: To adjust the brightness. X Contrast: To
x Hue:
X
Reset : Back to original setting.
X
Display Ratio ; To change the display ratio,'16:9/4:3
X
LR Rotation : To change the picture lefUilght.
X
UD Rotation : To change the picture up/ down.
adjust th6 contrast.
To adjust tho hue adjust in NTSC mode.
N Saturation: To adjust
E
Language : 2 languages for OSD as below
Volume: To adjusl the volumo.
OSD ln AV mode
ll
X
ths saturation.
EE
(souno)
(oSD)
X Volume: To adjust the volume
3.
Parameter 5. Trouble shootihg
Display pan€l
TFT LCD
8.olnch
1440000 Plx€ls
1. Only display black and white image
Please make sure that the @lor level settings of saturation brlghtnafa fnd
Resolutlon
8001480 (VOA)
Up resolution
1e20r,|440(VOA)
Brightness
300 od/il(without touch
ContEst
5o0rt
contrast is proper .c66n)
2. No image after connected to power Please check whether the AV or VGA cable is tightly mnnectad to VGA output,
Viewing angl6
70./70.,60.i60. (L/R,U/D)
Video slgnal lnput
0,7
VGAslgnal lnpui
Hr30 -80kHr
-
=-
and make sure that you use standard power adopter to the monltor, 3. Displaying distorted or abnormal color, as missing certain color
1,4Vp.p/75O V:80 - 76Hz
Please make sure that cables are securely connected; broken or loogc
olblt
will send bad signals and make the above problems.
Speaker
.26OmW8O
Color systgm
PAL4.43| NTBC.3,66
Voltage
oce.16v
4. Dark image or appearing some thing like interferonce Please check SKS input and black-g pin are tightly connected Signal input
PC (VGA).
Power @nsumptlon
t8w
Work temperature
-20 - 55t
5. Remote controller Gn't work AVl, AV2 HDMl1.2(optional)
Please check whether there are weak batteries or remote signals arg blookad ) or interfered.
Store tempemture
-30 - 66b
Size
208 (W) x'148(H)x34(D)mm
4.
r Remarks:
Accessorles
Power adaptsr Car power adapter
1pc 1pc
eble
1pc
g-pin VGA cable
1pc
SKS
HDMI line
1
pc (optional)
Remote control
1pc
Bracket
1pc
Touch screen driver disk
1pc (optional)
Touch pen Operation manual
Please check the correct loading of battery
'l
pc
lcopy
Please contact with related peGon if there are still some problems.
Please be kindly informed that image breaks ofi oc€sionally, it maybs du6 to the frequency of VGA mrd's signal don't ac@rd with normal standard.
Please be kindly noticed that it's normal condition when there are soms llnea on the screen when turning off the monitor
