Transcript
CWIP 44104
24", Stainless Steel, Under Cabinet Hood, Non-ducted The 41000 series of non-ducted under cabinet hoods are made to exacting Broan standards, providing effective filtration, high quality and value. The range hood comes in a variety of appliance matching colors and widths, and includes a removable combination grease-charcoal filter for cleaner indoor exhaust recirculation, a fan designed for years of trouble free service, a protective lamp lens that distributes light evenly over the cook-top and control switches for fan speed and light activation.
Installs as non-ducted only with charcoal filter A protective lamp lens distributes light evenly over the cook-top and accepts up to 75W bulb (bulb not included)
This range hood can work in an ADA-compliant application.
SPECIFICATIONS: Accessories Optional
No
Accommodates Ceiling Height
N/A
ADA Compliance
See Additional Information above
Blower Air Mover Type
Fan
Blower Included
Yes
Boost Mode
No
CFM (Airflow)
N/A
Color/Finish
Stainless Steel
Control Feature Filter Reminder
No
Damper Included
No
Delay Shut Off
No
Digital Clock
No
Dishwasher Safe Filters
No
Duct Connector Size
Non-ducted
ENERGY STAR® qualified
No
Filter Included
Yes
Filter Type
Charcoal
Flue Accommodates ceilings up to xx ft
N/A
Heat Sentry - Temperature Sensor
No
HVI Certified
No
Light Bulb Quantity
1
Light Bulbs Included
No
Lighting Function
One-level
Lighting Type
Incandescent
Minimum Height Above Cook Top
18"
Mounting System
Wall
Mounting Type
Under Cabinet
Nightlight
No
Non-Stick Coated
No
Product Depth (inches)
17-1/2"
Product Height (inches)
6"
Product Width (inches)
24"
Rated Amps
2.0
Remote Control
No
Sones Certified Horizontal Rectangular High
N/A
Sones Certified Horizontal Rectangular Low
N/A
Sones Certified Vertical Rectangular High
N/A
Sones Certified Vertical Rectangular Low
N/A
Sones Certified Vertical Round High
N/A
Sones Certified Vertical Round Low
N/A
Switch Control Settings
2
Switch Style
Rocker
Timer
No
UL Listed
Yes
Voltage
120
Additional Information for Range Hoods meeting ADA Compliance Broan and NuTone branded residential range hoods can be installed to comply with Sections 308 and 309 of ADA Guidelines, when used with appropriately mounted controls installed at 15” to 48” above the floor and control access should not require reaching over a cooking appliance. The following range hoods can work in an ADA Compliant situation when the range hood is wired to operate from a dedicated, standard electrical wall switch. To facilitate this application, share the information on the following pages with your electrician when preparing for the installation.
2-SPEED RANGE HOODS: Broan 40000, F40000, 41000, 42000, 43000, 52000, PM250, QL1, QS1, QSE1, QML and CBD1 Series NuTone NS6500, NSPM250, RL6200 & WS1 Series INTERMEDIATE RANGE HOODS: (with variable speed) Broan 46000 & QT20000 Series NuTone ACS Series
May 31, 2013 update
2-ROCKER & 3-ROCKER SWITCHES WARNING
WARNING
ALL ELECTRICAL WORK MUST BE DONE IN ACCORDANCE WITH LOCAL CODES, ORDINANCES, OR NATIONAL ELECTRICAL CODE AS APPLICABLE. FOR SAFETY,THIS PRODUCT MUST BE INSTALLED IN A GROUNDED SWITCH BOX. IF YOU ARE UNFAMILIAR WITH METHODS OF INSTALLING ELECTRICAL WIRING, SECURE THE SERVICES OF A QUALIFIED ELECTRICIAN.
To prevent serious injury from electrical shock or damage to electrical components - DO NOT WIRE HOT! Each individual rocker switch on this control is rated at 15 AMPS, @ 120 VAC. The total load on this control must not exceed 20 AMPS, @ 120 VAC. Warranty is void if miswired.
Turn off power and lock out service panel before installing or wiring this product.
NOTE:
Use this control only with copper or copper-clad wire. Do not use aluminum wire with this device.
WARNING:
INSTALLATION
If the switch has not been wired properly and wires need to be moved, proceed as follows:
To avoid fire or electrical shock, turn off power at circuit breaker or fuse. Test that the power is off before wiring. WIRE OPENING 1. Each wire opening has a release slot. 2. Push a small nail or screwdriver into release slot while gently removing wire.
1. WARNING
To avoid fire or electrical shock, turn off power at circuit breaker or fuse. Test that the power is off before wiring.
3. DO NOT pull any wire out of the switch without using the release slot.The switch may become damaged.
2. MOUNT THE SWITCH BOX
For 2-Rocker Switch: Install a 3½" deep single-gang switch box or a 2" deep double-gang switch box.
For 3-Rocker Switch: Install a 2½" deep double-gang switch box with a single device adapter plate.
RELEASE SLOT
STEP 4A
3. ATTACH POWER CABLE
SINGLE-GANG SWITCH BOX
Clamp wiring to switch box and unit using appropriate clamp. Provide 6" leads inside box and fan for easier wiring.
4. CONNECT WIRING
APPLIANCE RED
LOAD 1
BLACK
LOAD 2
COM 1 2 0 VA C LINE IN
General instructions for all configurations:
Make sure both the switch box and the appliance are properly grounded.
BLACK
Make sure ground wire is securely fastened to control's ground screw. Tighten ground screw 14 to 16-in. lbs. torque.
GROUND
Remove insulation per strip gauge on control (approx. 5/8"). Use proper wire nut sizes for number and size of wires.
For push-in terminals: Use #14-AWG solid copper wire only.
For screw terminals: Use #12 or #14-AWG solid copper wire only. Tighten screw terminals 14 to 16-in. lbs. torque.
WHITE
GRD
WHITE GROUND
3 - ROCKER SWITCH DOUBLE-GANG SWITCH BOX (with single device adapter plate)
Choose 4A., 4B. or 4C
COM
4A. When using 2-Rocker or 3-Rocker Switch to turn an appliance ON & OFF:
120 VAC LINE IN
Make electrical connections following appropriate diagram.
BLACK
(over)
2 - ROCKER SWITCH
WHITE GROUND
RED
LOAD 1
BLACK
LOAD 2
WHITE BLACK GRD
APPLIANCE
WHITE GROUND
LOAD 3
* 2- SPEED HOODS
Use UL approved clamps to secure all cables to hood and box. Make wiring connections following appropriate diagram. Use proper wire nut sizes for number and size of wires. Replace range hood wiring cover.
Remove the range hood’s wiring cover. If the hood has a BLACK JUMPER WIRE, it must be cut and the end stripped as shown. (FIG. I)
** INTERMEDIATE HOODS CUT BLACK JUMPER WIRE HERE!
Remove the range hood’s wiring cover. If the hood has a BLACK JUMPER WIRE, it must be cut and the end stripped as shown. (FIG. I)
4C. When using a 2-Rocker Switch to turn a range hood ON & OFF from another location with 120 VAC POWER CABLE ENTERING HOOD:
FIG. I
CUT BLACK JUMPER WIRE HERE!
STEP 4B
REF. FIG 1
* 2- SPEED HOODS
POWER INTO SWITCH
BLUE 2-ROCKER SWITCH
RED WHITE
RED
GROUND TO HOOD
BLACK
FROM SWITCH BOX
WHITE 120 VAC LINE IN
** INTERMEDIATE HOODS
Broan-NuTone warrants to the original consumer purchaser of its products that such products will be free from defects in materials or workmanship for a period of one year from the date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
RED
GRN
FROM SWITCH BOX
STEP 4C
Broan-NuTone LLC, 926 W. State Street, Hartford, Wisconsin 53027 www.broan.com 800-558-1711
REF. FIG 1
* 2- SPEED HOODS
POWER INTO HOOD
BLUE
BLACK
2-ROCKER SWITCH
RED WHITE RED
GROUND
BLACK
WHITE ‡
WHITE‡
BLACK
GROUND 120 VAC LINE IN
TO SWITCH BOX FROM HOOD
The duration of any implied warranty is limited to the one-year period as specified for the express warranty. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
To qualify for warranty service, you must (a) notify Broan-NuTone at the address or telephone number below, (b) give the model number and part identification and (c) describe the nature of any defect in the product or part. At the time of requesting warranty service, you must present evidence of the original purchase date.
BLACK
WHITE
THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS, TUBES, HALOGEN AND INCANDESCENT BULBS, FUSES, FILTERS, DUCTS, ROOF CAPS, WALL CAPS AND OTHER ACCESSORIES FOR DUCTING. This warranty does not cover (a) normal maintenance and service or (b) any products or parts which have been subject to misuse, negligence, accident, improper maintenance or repair (other than by Broan-NuTone), faulty installation or installation contrary to recommended installation instructions.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This warranty supersedes all prior warranties.
BLUE
BLACK
During this one-year period, Broan-NuTone will, at its option, repair or replace, without charge, any product or part which is found to be defective under normal use and service.
BROAN-NUTONE’S OBLIGATION TO REPAIR OR REPLACE, AT BROAN-NUTONE’S OPTION, SHALL BE THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. BROAN-NUTONE SHALL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH PRODUCT USE OR PERFORMANCE. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
REF. FIG 1
BLACK
6. ATTACH SWITCH PLATE Fasten the switch plate to the control using the short screws from the parts bag.
BROAN-NUTONE ONE YEAR LIMITED WARRANTY
GRN
WHITE
5. MOUNT CONTROL IN SWITCH BOX Tuck wires into switch box and fasten the control to box using attached screws.
** INTERMEDIATE RANGE HOODS: Broan 46000 & QT20000 Series. NuTone ACS3 Series.
BLACK
BLACK
Use UL approved clamps to secure all cables to hood and box. Make wiring connections following appropriate diagram. Use proper wire nut sizes for number and size of wires. Replace range hood wiring cover.
* 2-SPEED RANGE HOODS: Broan 40000, F40000, 41000, 42000, 43000, 52000, PM250, CBD1, QL1, QML, QS1 & QSE1 Series. NuTone NS6500, NSPM250, RL6200 & WS1 Series.
BLACK
** INTERMEDIATE HOODS
REF. FIG 1 BLUE BLACK
CODE REQUIRES BOTH ENDS OF THIS WIRE'S INSULATION TO BE COLORED. USE A PERMANENT MARKER. ‡
RED
BLACK BLACK WHITE WHITE‡ TO SWITCH BOX
GROUND 120 VAC LINE IN
99043739D
PK92824-10-00-0E
4B. When using a 2-Rocker Switch to turn a range hood ON & OFF from another location with 120 VAC POWER CABLE ENTERING SWITCH BOX:
