Cx55bmts

Transcript

CX55B MTS engine Model Yanmar 4TNV88-BXPYBD Cylinders 4 Bore/Stroke 3.46 in x 3.54 in (88 x 90 mm) Displacement 134.2 in (2.2 L) Fuel injection Direct 3 Fuel injection pump Mechanical Fuel Diesel Fuel filter Full flow, paper element Cooling Liquid Horsepower per SAE J1349 Net 39.3 hp (29.3 kW) @ 2400 rpm Maximum torque @ 1440 rpm Net 102.7 lb·ft (139.3 N·m) Boom Swing 70° left/60° right Length 9 ft 9 in (2.98 m) Arm 5 ft 6.5 in (1.66 m) Bottom, each track Drawbar Pull Boom cylinder (1) Tandem variable displacement axial piston pump Capacity – Maximum 2 x 15 gpm (2 x 57.1 L/min) Auxiliary Flow 15.0 gpm (57.1 L/min) System relief pressure – Standard 1 5 58% (30°) 12,409 lbf (55.2 kN) Bore diameter 3.94 in (100 mm) Rod diameter 2.17 in (55 mm) Stroke Pilot control hydraulic system – 26.8 in (680 mm) Arm cylinder (1) – Bore diameter 3.54 in (90 mm) Rod diameter 1.97 in (50 mm) Stroke 3,336 psi (23.0 MPa) 28.9 in (735 mm) Bucket cylinder (1) – Bore diameter 2.95 in (75 mm) Pump (1) Gear pump Rod diameter 1.57 in (40 mm) Maximum capacity 4.0 gpm (15.2 L/min) Stroke 21.4 in (543mm) Relief pressure 514 psi (3.5 MPa) Control valves — Batteries (1) 12V Swing/Dozer blade Fixed displacement axial piston design Speed 0-8.9 rpm Brake Hydraulic brake 4 ft 2 in (1280 mm) Travel – Motor (2) 2-speed axial piston design Final drive 40 amp Low-maintenance Service capacities Hydraulic tank Refill capacity 9 gal (34 L) Total system 16 gal (61 L) Engine oil w/filter change 2 gal (7.4 L) Fuel 19.8 gal (75 L) Radiator 1.6 gal (6.0 L) Planetary gear Travel speeds – 12 volts, negative ground Alternator Manual control for breaker &  backfill blade Motor (1) electrical Voltage 11 spool Tail swing overhang 0 ft 11.7 in (299 mm) Number of rollers Gradeability hydraulic cylinders Pumps Tail swing radius undercarriage Top, each track hydraulicS Pilot control for left/right track travel, boom, arm, bucket & swing boom/arm Length COMPACT EXCAVATOR TIER 4 COMPLIANT reduction Forward/Reverse Low 1.7 mph (2.7 km/h) High 2.9 mph (4.6 km/h) Page 1 of 4 operating weight Cab with 165 lb (75 kg) operator, 247 lb (112 kg) bucket, full fuel and standard equipment 12,295 lb (5577 kg) Lift Capacities Canopy model — 5 ft 6.5 in (1.66 m) Arm Lift capacities calculated using 15.7 in (400 mm) shoes, 247 lb (112 kg) bucket, blade down. Load (Lift 5 ft 7.5 ft 10 ft Point) (1.5 m) (2.3 m) (3.0 m) Height END SIDE END SIDE END SIDE +15 ft (4.6 m) 12.5 ft (3.8 m) END SIDE 1,800 lb* 1,800 lb* 810 kg* 810 kg* +12.5 ft (3.8 m) 1,640 lb* 740 kg* 1,640 lb* 740 kg* 1,860 lb* 840 kg* 1,740 lb 780 kg +10 ft (3.0 m) 1,830 lb* 830 kg* 1,830 lb* 830 kg* 1,850 lb* 830 kg* 1,750 lb 790 kg +7.5 ft (2.3 m) 3,840 lb* 1740 kg* END 17.5 ft (5.3 m) SIDE END SIDE 2,670 lb* 1210 kg* 2,670 lb* 1210 kg* 2,230 lb* 1010 kg* 2,230 lb* 1010 kg* 2,030 lb* 920 kg* 1,710 lb 770 kg +5 ft (1.52 m) 3,730 lb* 1690 kg* 3,140 lb 1420 kg 2,740 lb* 1240 kg* 2,230 lb 1010 kg 2,280 lb* 1030 kg* 1,660 lb 750 kg 2,060 lb* 930 kg* 1,280 lb 580 kg +2.5 ft (0.8 m) 4,550 lb* 2060 kg* 2,980 lb 1350 kg 3,190 lb* 1440 kg* 2,140 lb 970 kg 2,530 lb* 1140 kg* 1,620 lb 730 kg 2,160 lb* 970 kg* 1,260 lb 570 kg Ground Level 3,710 lb* 1680 kg* 3,710 lb* 1680 kg* 4,910 lb* 2220 kg* 2,900 lb 1310 kg 3,480 lb* 1570 kg* 2,080 lb 940 kg 2,700 lb* 1220 kg* 1,580 lb 710 kg -2.5 ft (-0.8 m) 4,130 lb* 1870 kg* 4,130 lb* 1870 kg* 5,940 lb* 2690 kg* 4,630 lb 2100 kg 4,910 lb* 2220 kg* 2,890 lb 1310 kg 3,550 lb* 1610 kg* 2,060 lb 930 kg 2,710 lb* 1220 kg* 1,570 lb 710 kg -5 ft (-1.5 m) 6,320 lb* 2860 kg* 6,320 lb* 2860 kg* 6,730 lb* 3050 kg* 4,700 lb 2130 kg 4,570 lb* 2070 kg* 2,920 lb 1320 kg 3,330 lb* 1510 kg* 2,070 lb 930 kg -7.5 ft (-2.3 m) 9,150 lb* 4150 kg* 9,150 lb* 4150 kg* 5,450 lb* 2470 kg* 4,810 lb 2180 kg 3,750 lb* 1700 kg* 2,990 lb 1350 kg 2,670 lb* 1210 kg* 2,670 lb* 1210 kg* -10 ft (-3.0 m) 3,840 lb* 1740 kg* 15 ft (4.6 m) *Rated loads are hydraulic limits rather than tipping load limits. Cab model — 5 ft 6.5 in (1.66 m) Arm Lift capacities calculated using 15.7 in (400 mm) shoes, 247 lb (112 kg) bucket, blade down. Load (Lift 5 ft 7.5 ft 10 ft Point) (1.5 m) (2.3 m) (3.0 m) Height END SIDE END SIDE END SIDE +15 ft (4.6 m) 12.5 ft (3.8 m) END SIDE 1,800 lb* 1,800 lb* 810 kg* 810 kg* +12.5 ft (3.8 m) 1,640 lb* 740 kg* 1,640 lb* 740 kg* 1,860 lb* 840 kg* 1,810 lb 820 kg +10 ft (3.0 m) 1,830 lb* 830 kg* 1,830 lb* 830 kg* 1,850 lb* 830 kg* 1,810 lb 820 kg +7.5 ft (2.3 m) 3,840 lb* 1740 kg* END 17.5 ft (5.3 m) SIDE END SIDE 2,670 lb* 1210 kg* 2,670 lb* 1210 kg* 2,230 lb* 1010 kg* 2,230 lb* 1010 kg* 2,030 lb* 920 kg* 1,780 lb 800 kg +5 ft (1.52 m) 3,730 lb* 1690 kg* 3,250 lb 1470 kg 2,740 lb* 1240 kg* 2,310 lb 1040 kg 2,280 lb* 1030 kg* 1,730 lb 780 kg 2,060 lb* 930 kg* 1,340 lb 600 kg +2.5 ft (0.8 m) 4,550 lb* 2060 kg* 3,100 lb 1400 kg 3,190 lb* 1440 kg* 2,230 lb 1010 kg 2,530 lb* 1140 kg* 1,690 lb 760 kg 2,160 lb* 970 kg* 1,320 lb 590 kg Ground Level 3,710 lb* 1680 kg* 3,710 lb* 1680 kg* 4,910 lb* 2220 kg* 3,020 lb 1360 kg 3,480 lb* 1570 kg* 2,170 lb 980 kg 2,700 lb* 1220 kg* 1,650 lb 740 kg -2.5 ft (-0.8 m) 4,130 lb* 1870 kg* 4,130 lb* 1870 kg* 5,940 lb* 2690 kg* 4,810 lb 2180 kg 4,910 lb* 2220 kg* 3,010 lb 1360 kg 3,550 lb* 1610 kg* 2,150 lb 970 kg 2,710 lb* 1220 kg* 1,640 lb 740 kg -5 ft (-1.5 m) 6,320 lb* 2860 kg* 6,320 lb* 2860 kg* 6,730 lb* 3050 kg* 4,880 lb 2210 kg 4,570 lb* 2070 kg* 3,030 lb 1370 kg 3,330 lb* 1510 kg* 2,160 lb 970 kg -7.5 ft (-2.3 m) 9,150 lb* 4150 kg* 9,150 lb* 4150 kg* 5,450 lb* 2470 kg* 4,990 lb 2260 kg 3,750 lb* 1700 kg* 3,110 lb 1410 kg 2,670 lb* 1210 kg* 2,670 lb* 1210 kg* -10 ft (-3.0 m) 3,840 lb* 1740 kg* 15 ft (4.6 m) *Rated loads are hydraulic limits rather than tipping load limits. CX55MTSB • Page 2 of 4 B C K A H J L F G D E DIMENSIONS A. Overall height B. Overall length 8 ft 4 in (2.55 m) 17 ft 10 in (5.42 m) C. Width of upperstructure 6 ft 4 in (1.94 m) D. Track overall length 8 ft 1 in (2.48 m) E. Track overall width w/15.7 in (400 mm) shoes 6 ft 5 in (1.96 m) F. Track shoe width 15.7 in (400 mm) G. Center to center (idler to sprocket) 6 ft 6 in (1.90 m) H. Upperstructure ground clearance 24.5 in (625 mm) J. Minimum ground clearance K. Tail swing radius L. Backfill blade height Working weight Ground pressure Boom swing Tail swing overhang M N S 1 ft 2 in (350 mm) 4 ft 2 in (1.28 m) 1 ft 2 in (345 mm) R 12,295 lb (5577 kg) 4.5 psi (31.3 kPa) Left 70°/ Right 60° 11.7 in (299 mm) Q T P PERFORMANCE SPECS 5 ft 6.5 in (1.66 m) Arm M. Maximum dig radius 20 ft 5 in (6.22 m) N. Dig radius at groundline 19 ft 11 in (6.07 m) P. 12 ft 10 in (3.91 m) Maximum dig depth Q. Dump height 13 ft 10 in (4.20 m) R. Overall reach height 18 ft 11 in (5.76 m) S. Bucket rotation T. Vertical straight wall dig depth 178° 10 ft 0.5 in (3.06 m) Arm digging force 5,598 lbf (24.9 kN) Bucket digging force, 2 position bucket 11,240 lbf (50.0 kN) CX55MTSB • Page 3 of 4 STANDARD equipment OPERATOR’S COMPARTMENT ELECTRICAL OTHER ROPS/FOPS four post canopy 12-volt electrical starting system Swing boom (70° left/60° right) Operator’s controls: Heavy-duty battery Hydraulic backfill blade Horn Eco-friendly diesel fuel drain HYDRAULICS Reinforced boom work light Auxiliary hydraulics (single/bi-directional) and plumbing to arm Thumb bracket Pilot operated hand controls and foot pedals Display includes: Engine oil pressure, water temperature lamp, air filter lamp, water separator detection lamp, low fuel warning lamp, battery charge lamp, glow plug indicator lamp, water temperature gauge, fuel gauge and hourmeter Boom cylinder guard Large hydraulic oil cooler Control pattern selector valve TRACK DRIVE Adjustable seat with seat belt Rubber tracks Two-piece floor mat Automatic 2-speed travel Fold-open/-up front window (cab) Fully hydrostatic drive system Arm rests Sealed and lubricated track rollers ENGINE Track tension adjustment (grease-type) Yanmar 4TNV88-BXPYBD diesel Disc-type parking brake (auto-release and -apply) 4-cycle UPPER STRUCTURE Water cooled Minimal tail swing Direct injection Swing lock One-touch decelerator Swing brake Engine access under rear hood Swing shock valve Dry-type air cleaner Glow plug starting aid Optional Equipment OPERATOR’S COMPARTMENT OTHER Cab with heat and AC Steel tracks Mechanical coupler Rigid thumb Hydraulic thumb 2nd auxiliary hydraulics 4-way hydraulic dozer blade BUCKETS Width SAE Heaped Capacity Weight 12 in (305 mm) 3.0 ft (0.085 m ) 314 lb (142 kg) 18 in (457 mm) 4.5 ft (0.127 m ) 362 lb (164 kg) 24 in (610 mm) 6.3 ft3 (0.178 m3) 435 lb (197 kg) 36 in (914 mm) 9.8 ft (0.277 m ) 525 lb (238 kg) 3 3 3 3 3 3 NOTE: All specifications are stated in accordance with SAE Standards or Recommended Practices, where applicable. NOTE: All engines meet current EPA emissions requirements. IMPORTANT: Case Construction Equipment Inc. reserves the right to change these specifications without notice and without incurring any obligation relating to such change. Case Construction Equipment Inc. does not warrant the safety or reliability of attachments from other manufacturers. Case is a registered trademark of CNH America LLC. Any trademarks referred to herein, in association with goods and/or services of companies other than CNH America LLC, are the property of those respective companies. Form No. CCE201103CX55B Replaces form no. None Printed in U.S.A. CX55MTSB • Page 4 of 4 All Case construction equipment is biodiesel ready. www.casece.com © 2011 CNH America LLC All Rights Reserved CX B SERIES COMPACT EXCAVATORS CX17B | CX27B | CX31B | CX36B | CX55B MINI EXCAVATORS. MANY ADVANTAGES. Whether you’re a small business or a general contractor needing impressive power within a small space, the full line of CASE compact excavators offer all the features and functionality needed to handle the toughest jobs in the tightest places. Four Tier 4 Interim models and the Tier 4 Final CX55B deliver breakout forces from 3,417 to 11,028 lbs. and digging depths up to nearly 13 feet. And it’s all powered by high-efficiency hydraulics that maximize performance, and precision controls that instantly feel familiar. Experience the big-time benefits of the CX B Series. Zero Tail Swing* *Excludes CX55B Center-Swing Boom Control Integrated-Flow Pump System Exclusive In-Frame Sliding Door* *Excludes CX55B 2 Models Available CX17B CX27B CX31B CX36B Three-Post ROPS Design CX55B Automatic* Two-Speed Travel *Manual two-speed travel on CX17B and CX27B 3 IT HOLDS NOTHING BACK. IN THE CLEAR WITH ZERO TAIL SWING* CASE compact excavators offer a true, zero-radius tail swing that keeps the sides and back of the machine within the width of the tracks when rotating – even with the door open. You can dig and dump 180°, right against obstacles, without a problem and with less risk of damaging the machine or worksite. *Excludes CX55B FOOT PEDAL CENTER-SWING BOOM CONTROL A foot-controlled boom swing allows for simultaneous operation of the house and boom. Coupled with a center-swing design that angles the boom up to 80° left and 65° right, operators are able to dig and use attachments around trees and parallel with foundations, fences, walls or whatever’s on the worksite. INTEGRATED-FLOW PUMP SYSTEM: SMART POWER PLACEMENT This innovative system helps improve fuel efficiency and maximize strength by directing hydraulic power to where you need it, when you need it. With dozing, flow is focused on the tracks and blade. When swinging or raising the arm, pump power is diverted to the boom. During digging, all flow is pumped to the bucket and arm. FASTER CYCLE TIMES WITH TWO-SPEED TRAVEL Automatic on the CX31B, CX36B and CX55B, and push-button activated on the CX17B and CX27B, the two-speed travel drive function matches speed and performance to jobsite conditions. All models also include one-touch engine deceleration to quickly cut engine RPMs for greater fuel savings and reduced noise levels. RETRACTABLE TRACKS Getting through backyard gates or any tight spot is easy for the CX17B, thanks to tracks that hydraulically retract from 52 inches to a narrow 39-inch width. And all our compact excavators come standard with durable rubber tracks with big, deep nubs for greater grip. CASE even offers steel tracks on every model for heavy-duty applications. 4 “My two CASE compact excavators just shine. We have had zero problems.” — Benoit Drainage 5 3-POST CANOPY*. 360° VISIBILITY. Our ROPS-certified three-post canopy design creates a wideopen entry area for easier access in and out of the operating platform. And as an added benefit, the absence of a fourth post provides greater visibility of the attachment and around the machine. *CX55B features a four-post ROPS/ FOPS-certified canopy. 6 GET A LITTLE MORE COMFORTABLE. SMARTEST CAB DOOR IN ITS CLASS What’s the point of a zero tail swing design if the open door hangs over the tracks? CASE compact excavators* come standard with a cab door that slides all the way open within the machine frame, keeping it securely out of the way. *Excludes CX55B Exclusive sliding cab door maintains zero tail swing. PRECISION CONTROLS COME STANDARD All CASE compact excavators – even our smallest models – come standard with hydraulic pilot controls for comfortable, highly responsive operation. On top of that, all models also feature a pattern control selector valve that lets you easily toggle between ISO and SAE patterns to meet operator preference. Proportional auxiliary hydraulics joystick with thumb toggle puts precision at your fingertips. CONSTRUCTED FOR COMFORT With an adjustable seat and standard arm rest, as well as an optional heating and A/C system* for our enclosed cabs, the spacious operating platforms of the CX B Series help keep you comfortable all day long and all year ‘round. *HVAC system only available on the CX31B and larger. Spacious CX55B cab offers an optional LCD display. 7 COMPACT CLASS, MID-SIZE MUSCLE. CX55B The CX55B pushes the envelope of what it means to be a mini-excavator. It features best-in-class power, a wider operating range and a cab design that offers plenty of room and superior visibility – all while maintaining minimum tail swing and an overall cab height of only 8-feet 4-inches. It’s perfect for when you need a lot of strength in a little package. 8 7.5-INCH MINIMAL TAIL SWING Minimal tail overhang allows for excellent maneuverability in tight areas. ECO MODE Achieve 25% less fuel consumption at the push of a button (compared to previous generation). iNDr COOLING SYSTEM A revolutionary Integrated Noise and Dust Reduction (iNDr) filter removes dust before cooling components to maximize cooling efficiency and reduce cleaning intervals. It also delivers amazingly quiet operation. DOZER-STYLE BLADE A new, “one-pass” backfill blade design forms material into an arc that always falls forward. LCD MONITOR An optional LCD monitor makes performance data and machine diagnostics readily available. 9 MAINTENANCE MADE EASY. SERVICEABILITY IS IN OUR DNA When you invest in CASE equipment, you need it to last. We make it simple. CASE compact excavators are no exception. From wide-open, swing-out access panels to ground-level site gauges and service points, you can do daily maintenance in a matter of minutes. It’s the easiest way to help you get the most performance and longest life out of your machine. Update Livery EASY ACCESS TO EVERYTHING 10 1. Air filter 2. Water separator 3. Fuel filter 4. Hydraulic oil fill 5. Radiator 6. Grouped hydraulic hoses 7. Hydraulic site gauge 8. Hour meter 9. ISO/SAE pattern changer 10. Single/bi-directional select 11. Lockable fuel cap 12. Engine oil fill 13. Engine oil filter 14. Fuel drain 15. Coolant reservoir SUPPORT COMES STANDARD Base & Extended Warranty Coverage* 1-Year/1,000-Hour Full-Coverage Limited Base Warranty. *Please see your CASE dealer for limitations, exclusions and confirmation of policies in effect. Purchased Protection Plan Extension of the factory base and extended coverage is available at an additional cost. Plans are available up to three years/3,000 hours on CASE compact excavators. Talk to your CASE dealer to determine the plan that best fits your needs.  Breakdown Assistance Standard on all CASE equipment. STRONGER PRODUCT SUPPORT SOLUTIONS NO TOOLS NEEDED The CX B Series continues the CASE hallmark of simple serviceability with features like tool-free access to routine maintenance points. Your CASE dealer knows best how you can maximize your equipment investment and uptime, with genuine CASE parts, expert service and a complete range of product support solutions – including CASE remanufactured and all-makes parts. CASE supports better parts availability and faster deliveries, through nine parts distribution centers in North America and a forecasting system to ensure that the right parts will be there when you need them. And only CASE dealers have exclusive access to the Electronic Service Tool that quickly pinpoints machine issues to help maximize uptime. 11 AUXILIARY EXCELLENCE Auxiliary hydraulics come standard with lines plumbed all the way down the arm for easy hook-up. 12 ATTACHMENTS GALORE. BUCKETS AND MUCH MORE There’s a full range of attachments, including a full line of CASE buckets with a wide range of sizes and digging forces. INDUSTRY-EXCLUSIVE BLADE DESIGN CASE dozer blades feature an increased 38° approach angle and a unique shape that efficiently rolls dirt as it pushes, leaving a smooth and level surface. And with the optional 4-way blade*, operators can raise and lower the blade for added stability and improved backfilling or grading. *4-way angle blade available on the CX31B and larger SMARTFIT™ BUCKET TEETH CASE compact excavator buckets come standard with the innovative SmartFit bucket tooth system. These heavy-duty, self-sharpening teeth combine exceptional strength and unmatched ease of installation, thanks to a hammerless fastener system with reusable locking pins. Available in a full range of styles. 13 THE CX B SERIES COMPACT EXCAVATORS CX17B CX27B CX31B CX36B CX55B Tier 4 Final Mitsubishi L3E-W231KBS Yanmar 3TNV82-A-SYB Yanmar 3TNV88-BPYB Yanmar 3TNV88-BPYB Yanmar 4TNV88-C-PYB Net hp (kW) 15.2 (11.3) @ 2200 RPM 21.3 (15.9) @ 2200 RPM 28.4 (21.2) @ 2400 RPM 28.4 (21.2) @ 2400 RPM 39.3 (29.3) @ 2400 RPM Emissions certification* Tier 4 Interim Tier 4 Interim Tier 4 Interim Tier 4 Interim Tier 4 Final (CEGR/DPF) Bucket digging force – lb. (kN) 3,417 (15.2) 6,351 (28.2) 8,430 (37.5) 8,430 (37.5) 11,128 (49.5) Arm digging force – lb. (kN) 1,956 (8.7) 2,877 (12.8) 3,373 (15.0) 3,731 (17.0) 5,300 (23.7) Operating weight – lb. (kg) 3,638 (1 650) 5,556 (2 520) 6,679 (3 030) 7,958 (3 610) 11,310 (5 130) Overall height 7 ft. 9 in. (2.35 m) 8 ft. 2 in. (2.50 m) 8 ft. 5 in. (2.57 m) 8 ft. 5 in. (2.57 m) 8 ft. 4 in. (2.55 m) Overall length 11 ft. 3 in. (3.42 m) 13 ft. 11 in. (4.13 m) 14 ft. 4 in. (4.39 m) 15 ft. 5 in. (4.71 m) 17 ft. 10 in. (5.42 m) Width of upperstructure 2 ft. 11 in. (0.89 m) 4 ft. 7 in. (1.40 m) 5 ft. 1 in. (1.55 m) 5 ft. 1 in. (1.55 m) 6 ft. 4 in. (1.94 m) Track overall length 5 ft. 2 in. (1.56 m) 6 ft. 6 in. (1.98 m) 6 ft. 7 in. (2.00 m) 7 ft. 1 in. (2.15 m) 8 ft. 1 in. (2.48 m) Track overall width with shoes** 4 ft. 4 in. (1.32 m) 4 ft. 11 in. (1.50 m) 5 ft. 1 in. (1.55 m) 5 ft. 7 in. (1.70 m) 6 ft. 6 in. (1.98 m) Track shoe width 9.1 in. (230 mm) 9.8 in. (250 mm) 11.8 in. (300 mm) 11.8 in. (300 mm) 15.7 in. (400 mm) Upperstructure ground clearance 18.0 in. (445 mm) 20.0 in. (520 mm) 22.0 in. (570 mm) 22.0 in. (570 mm) 24.5 in. (625 mm) Minimum ground clearance 6.9 in. (175 mm) 9.8 in. (250 mm) 12.9 in. (330 mm) 12.9 in. (330 mm) 14.0 in. (350 mm) Rear tail swing radius 2 ft. 2 in. (0.66 m) 2 ft. 5 in. (0.75 m) 2 ft. 7 in. (0.79 m) 2 ft. 9 in. (0.85 m) 4 ft. 2 in. (1.28 m) 7 ft. 1 in. (2 159 mm) 8 ft. 4 in. (2 540 mm) 9 ft. 2 in. (2 794 mm) 10 ft. 1 in. (3 073 m) 12 ft. 10 in. (3 912 mm) SPECIFICATIONS Engine DIMENSIONS Digging depth NOTE: *CEGR = Cooled Exhaust Gas Recirculation; DPF = Diesel Particulate Filter. **Measurements taken using standard equipment. 14 BUILDING A STRONG CASE Already in high gear with the arrival of founder J.I. Case’s portable steam engine in 1869, we found ourselves at the heart of the road construction boom of the early 1900s. The path was set. Today, CASE is a game changer in construction equipment, financing, parts and service. Revolutionary is nothing new to CASE, as innovations like the integrated loader/backhoe (1957), Ride Control™, over-center boom design and ProCare have shown. It’s this ingenuity and spirit that fuels our ongoing pursuit of building industry-leading performance and productivity into every machine throughout our full line of light, medium and heavy equipment. All of this is backed by a portfolio of more than 10,000 OEM, REMAN and Gold Value parts, more than 350 North American dealer locations, and unmatched financial and insurance services that ensure the best support is always within reach. When all is said and done, our strength is only as solid as the machines we engineer, the support and service we give, and most importantly, the vote of confidence CASE customers have with every bit of it. Specialized finance programs and flexible leasing packages put you in the driver’s seat of industryleading CASE equipment, while no-nonsense warranties and comprehensive protection plans ensure that your equipment is protected. As the only finance company dedicated to CASE, we offer strong products and services designed around your unique needs and are the only ones supported by the helpful service professionals at your CASE dealer. To learn more about CASE or for attentive customer service, visit your nearest dealer, call 1-866-54CASE6 or visit us online at CaseCE.com. 15 CaseCE.com ©2014 CNH Industrial America LLC. All rights reserved. CASE is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. CNH Industrial Capital is a trademark in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. Printed in U.S.A. Form No. CCE201401CEXC Always read the Operator’s Manual before operating any equipment. Inspect equipment before using it, and be sure it is operating properly. Follow the product safety signs and use any safety features provided. NOTE: All engines meet current EPA emission regulations. NOTE: All specifications are stated in accordance with SAE Standards or Recommended Practices, where applicable. Contains 10% post-consumer fiber IMPORTANT: CASE Construction Equipment Inc. reserves the right to change these specifications without notice and without incurring any obligation relating to such change. Availability of some models and equipment builds vary according to the country in which the equipment is used. The illustrations and text may include optional equipment and accessories and may not include all standard equipment. Your CASE dealer/distributor will be able to give you details of the products and their specifications available in your area. CASE Construction Equipment is biodiesel friendly.