D-120 (p/n: 450596)

Transcript

D-120 Parts Manual J.L.A. Meadowcroft Lane, Halifax Road Ripponden W. Yorkshire, England HX6 4AJ Telephone: 1 422 822282 / Fax: 1 422 824390 042202DMG/mcronan ADC Part No. 450596 Retain This Manual In A Safe Place For Future Reference This product embodies advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY POUR VOTRE SÉCURITÉ Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil. We have tried to make this manual as complete as possible and hope you will find it useful. The manufacturer reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: DATE OF PURCHASE ____________________________ MODEL NO. D-120 __________________________________________ DISTRIBUTOR’S NAME ___________________________________________________________________________________ Serial Number(s) ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ Replacement parts can be obtained from your distributor or J.L.A. When ordering replacement parts from the factory, you can FAX your order to J.L.A. at 1 422-824390 or telephone your order directly to the J.L.A. Parts Department at 1 422-822282. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering. “IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer. Table of Contents Control Door Assembly .......................................................................................................................... 2 Phase 7 OPL Microprocessor Control Panel Assembly ........................................................................... 3 Wrapper Assembly ................................................................................................................................. 4 Front Panel Assembly ............................................................................................................................. 5 Cold Rolled Steel (CRS) Door Assembly ................................................................................................ 6 Main Door Switch Assembly ................................................................................................................... 7 Lint Drawer/Lint Screen Assembly .......................................................................................................... 8 Microprocessor Temperature Sensor Bracket ......................................................................................... 9 Motorized Impellor Assembly ............................................................................................................... 10 Basket (Tumbler) Assembly .................................................................................................................. 11 Phase 7 Rotational Sensor Assembly ..................................................................................................... 12 Drive Shaft Assembly ............................................................................................................................ 13 Idler Shaft Assembly ............................................................................................................................. 14 Drive Motor Assembly .......................................................................................................................... 15 CE Hot Surface Ignition (HSI) Gas Burner Assembly ...................................................................... 16, 17 72 Kw Electric Oven Assembly ............................................................................................................ 18 Oven Relay Box Assembly .................................................................................................................... 19 Steam Damper Assembly ................................................................................................................ 20, 21 Sail Switch Assembly ............................................................................................................................ 22 Pneumatic Valve Assembly ................................................................................................................... 23 Reversing Relay Panel Assembly For 60 Hz Gas and Steam Models Only ...................................................................................... 24, 25 Reversing Relay Panel Assembly For 50 Hz Gas and Steam Models Only ...................................................................................... 26, 27 Reversing Relay Panel Assembly For 60 Hz Electric Models Only ....................................................................................................... 28 Air Jet Assembly ................................................................................................................................... 29 F.S.S. Temperature Probe Assembly ..................................................................................................... 30 F.S.S. Solenoid Assembly ..................................................................................................................... 31 Back Draft Damper Assembly ............................................................................................................... 32 2 Control Door Assembly Illus. No. Part No. Qty. 1 883323* 1 2 3 4 5 6 7 8 9 10 117603 117604 150314 154011 --------** 150309 102603 102601 102502 2 4 2 2 1 4 1 1 1 Description Control Door (includes illus. nos. 2, 3, and 8) 1/8” x 9/16” Noise Suppressor Tape Neoprene Sponge Tape (sold by the foot) #10-32 x 1/2” TORX Screw #10-32 Multi-Thread U-Nut Logo ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Control Door Rod Support Catch Control Door Retainer Clip Control Door Rod * Specify color when ordering. ** Contact distributor for logo. Phase 7 OPL Microprocessor Control Panel Assembly Illus. No. Part No. Qty. 1 2 3 112537 850984 822767 1 1 1 4 5 6 7 137247 150005 153010 136016 136097 1 2 2 1 1 Description Phase 7 OPL Keyboard Phase 7 Microprocessor Controller (computer) Panel ONLY Phase 7 OPL Reversing Microprocessor Controller (computer) Control Panel Assembly Complete (includes illus. nos. 1 through 7) Phase 7 OPL Microprocessor Controller (computer) ONLY #6-32 x 3/4” Phillips Round Head Machine Screw #6 Star Washer 5-Amp Fuse 500-mA Fuse 3 4 Wrapper Assembly Illus. No. Part No. Qty. 1 2 3 150309 859367 --------- 20 1 1 4 --------- 1 5 6 859368 --------- 1 1 7 122116 1 Description #10-16 x 1/2” Hex Head TEK Crimptite Screw Bottom Right Wrapper Drive Shaft Assembly (refer to Drive Shaft Assembly on page 13) Microprocessor Temperature Sensor Bracket (refer to Microprocessor Temperature Sensor Bracket on page 9) Bottom Left Wrapper Idler Shaft Assembly (refer to Idler Shaft Assembly on page 14) 24 VAC Lint Door Switch 5 Front Panel Assembly Illus. No. Part No. Qty. 1 -------- 1 2 3 150443 881441 882283 153031 150443 881440 882284 883318 883319 882288 2 1 1 1 2 1 1 1 1 1 882289 1 882290 1 8 -------- 1 9 10 11 150201 170330 154215 2 1 2 4 5 6 7 Description Cold Rolled Steel (CRS) Main Door Assembly (refer to Cold Rolled Steel (CRS) Door Assembly on page 6) Socket Cap Screw White Bottom Hinge Block Coral Blue Bottom Hinge Block Nylon Washer Socket Cap Screw White Top Hinge Block Coral Blue Top Hinge Block White Front Panel Assembly Coral Blue Front Panel Assembly White Front Panel Assembly Complete (includes illus. nos. 2 through 11) Cornflower Blue Front Panel Assembly Complete (includes illus. nos. 2 through 11) Coral Blue Front Panel Assembly Complete (includes illus. nos. 2 through 11) Main Door Switch Assembly (refer to Main Door Switch Assembly on page 7) #10-32 x 1/4” Phillips Pan Head Tap Screw Friction Door Latch 5/32 x 1/4” Rivet 6 Cold Rolled Steel (CRS) Door Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 Part No. Qty. 881689 1 882292 1 881684 882305 102214 170730 881685 882296 881740 882311 882294 881688 882295 881806 882293 152008 150120 882411 151012 1 1 1 1 1 1 6 6 6 1 1 6 6 1 1 1 4 Description White Cold Rolled Steel (CRS) Main Door Assembly (includes illus. nos. 2 through 10) Coral Blue Cold Rolled Steel (CRS) Main Door Assembly (includes illus. nos. 2 through 10) White Cold Rolled Steel (CRS) Main Door Ring Coral Blue Cold Rolled Steel (CRS) Main Door Ring 30” Door Glass Door Glass Adhesive (10.3 oz. cartridge) White Main Door Hinge Coral Blue Main Door Hinge 1/4-20 x 5/8” White Carriage Bolt 1/4-20 x 5/8” Cornflower Blue Carriage Bolt 1/4-20 x 5/8” Coral Blue Carriage Bolt White Main Door Handle Coral Blue Main Door Handle 1/4-20 White Free Spin Wash Nut 1/4-20 Coral Blue Free Spin Wash Nut #10-32 Hex Nut Door Latch Screw Door Gasket #10-32 White Nylon Acorn Nut Main Door Switch Assembly Illus. No. 1 2 3 4 5 6 Part No. Qty. 150006 152013 153010 137005 881702 2 2 2 1 1 882298 1 881687 882291 150201 1 1 2 Description #6-32 x 7/8” Phillips Pan Head Machine Screw #6-32 Hex Nut #6 Star Washer Door Switch White Main Door Switch Housing Assembly (includes illus. nos. 1 through 5) Coral Blue Main Door Switch Housing Assembly (includes illus. nos. 1 through 5) White Main Door Switch Housing ONLY Coral Blue Main Door Switch Housing ONLY #10-32 x 1/4” Phillips Pan Head Tap Screw 7 8 Lint Drawer/Lint Screen Assembly Illus. No. 1 2 3 4 5 Part No. Qty. 882299 1 882301 1 115902 108227 816100 154215 117607 1 1 1 5 6’ Description White Lint Drawer Assembly (includes illus. nos. 1 and 2) Coral Blue Lint Drawer Assembly (includes illus. nos. 1 and 2) Lint Basket Felt Cloth Lint Screen Assembly Stainless Steel Lint Screen Assembly 5/32 x 1/4” Rivet 1/4” x 3/8” Poron Foam Microprocessor Temperature Sensor Bracket Illus. No. Part No. Qty. 1 859372 1 2 3 4 5 6 7 8 9 10 11 12 13 881089 880252 154007 121028 122701 122605 122700 122604 130302 150005 153010 152013 152014 1 1 2 2 4 1 4 1 1 2 2 2 2 Description Microprocessor Temperature Sensor Bracket Complete (includes illus. nos. 1 through 13) Microprocessor Temperature Sensor Bracket ONLY 4” Temperature Sensor 1/4” Push On Fastener 1/4” Terminal Socket Terminal ONLY 4-Position Female Connector Pin Terminal ONLY 4-Position Male Connector 225º Manual Reset Thermostat #6-32 x 1/4” Phillips Round Head Machine Screw #6 Star Washer #6-32 Hex Nut 1/4-20 Free Spin Wash Nut 9 10 Illus. No. 1 2 3 4 5 6 Motorized Impellor Assembly Part No. Qty. 859364 100622 100619 100617 859361 1 1 1 1 1 816086 1 859363 1 390254 150504 150512 154335 1 4 4 8 Description Coop Cone Motorized Impellor (fan/blower) 230V 3ø 60 Hz Motorized Impellor (fan/blower) 230/400V 3ø 50 Hz, 460/480V 3ø 60 Hz Motorized Impellor (fan/blower) 208V 3ø 60 Hz Motorized Impellor Assembly 230V 3ø 60 Hz (includes illus. nos. 1, 2, 3, and 6) Motorized Impellor Assembly 230/400V 3ø 50 Hz, 460/480V 3ø 60 Hz (includes illus. nos. 1, 2, 3, and 6) Motorized Impellor Assembly 208V 3ø 60 Hz (includes illus. nos. 1, 2, 3, and 6) Motor Plate 5/16-18 x 1” Hex Head Bolt 1/4-20 x 1/2” Hex Head Machine Bolt M10 x 16 Metric Tap Bolt Basket (Tumbler) Assembly Illus. No. Part No. Qty. 1 819048 1 2 3 4 -- 390704 150118 116006 401010 4 48 1 1 Description Basket (tumbler) and Support Complete (includes illus. nos. 1 through 3) Basket (tumbler) Side 1/4-20 x 1/4” Stainless Steel Phillips Pan Head Screw Felt Collar 139-3/8” x 2-1/2” x 1/8” 3M #847 Construction Mastic 11 12 Illus. No. Phase 7 Rotational Sensor Assembly Part No. Qty. 1 819064 1 2 3 4 5 6 7 8 9 10 835339 102394 153005 150619 153004 180018 819046 819065 822735 152005 1 2 6 2 8 4 1 1 1 4 Description Basket (tumbler) Shaft Support Assembly Complete (includes illus. nos. 1 through 8) Basket (tumbler) Shaft Support Bracket Basket (tumbler) Friction Pad 3/8” Lock Washer 3/8-16 x 1” Tap Bolt 3/8” Flat Washer 4” x 1-1/2” Hi-Impact Wheel Basket (tumbler) Adjustment Plate Basket (tumbler) Shoulder Screw Phase 7 Rotational Sensor Assembly 3/8-16 Hex Nut 13 Drive Shaft Assembly Illus. No. Part No. Qty. 1 390641 816061 1 1 2 3 4 5 6 7 8 9 10 11 180033 180038 880205 152004 153002 153001 859008 816108 150613 101209 1 1 2 4 4 4 2 2 4 1 Description Drive Shaft ONLY Drive Shaft Assembly (includes illus. nos. 1 through 11) 6-1/4” Drive Wheel and Hub 1” Taper Lock 1” Pillow Block Bearing 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Bearing Bolt Plate Assembly Bearing Pad 5/16-18 x 4” Tap Bolt 9” Pulley 14 Idler Shaft Assembly Illus. No. Part No. Qty. 1 390642 816062 1 1 2 3 4 5 6 7 8 9 10 180033 180038 880205 152004 153002 153001 816108 859327 150613 1 1 2 4 4 4 2 2 4 Description Idler Shaft ONLY Idler Shaft Assembly (includes illus. nos. 1 through 10) 6-1/4” Drive Wheel and Hub 1” Taper Lock 1” Pillow Block Bearing 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Bearing Bolt Plate Assembly Bearing Pad 5/16-18 x 4” Tap Bolt 15 Drive Motor Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 Part No. Qty. 859332 152004 150501 153001 153002 816060 1 4 2 3 3 1 181029 816088 1 1 181034 100174 101132 101130 150501 153002 153001 150501 1 1 1 1 4 8 8 1 Description Motor Mount 5/16” Hex Nut 5/16-18 x 3/4” Hex Bolt 5/16” Flat Washer 5/16” Lock Washer Drive Motor Assembly (60 Hz) (includes illus. nos. 1 through 12) 1 HP 200-230/460V 3ø 60 Hz Drive Motor Drive Motor Assembly (50 Hz) (includes illus. nos. 1 through 12) 1 HP 200-230/460V 3ø 50 Hz Drive Motor AX53 Cogged Belt 2.0 O.D. x 5/8” Machine MA Sheave 60 Hz 2.5 x 5/8” Bore MA Sheave 50 Hz 5/16-18 x 3/4” Hex Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16-18 x 3/4” Hex Bolt 16 CE Hot Surface Ignition (HSI) Gas Burner Assembly CE Hot Surface Ignition (HSI) Gas Burner Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 142951 331291 150309 142813 141300 142701 142601 142701 142504 142709 390125 140028 331291 141219 140832* 140819* 883330* 881492 390709 128975 390708 881597 128921 150001 151000 130201 821457 816105** 1 1 26 1 1 1 1 1 1 1 1 1 1 1 3 3 1 3 1 1 1 816110 335031 142911 142916 331290 -------- 1 1 1 1 1 1 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 2 2 1 1 1 Description 1-1/4” BSPT x 3/4” N.P.T. Reducing Coupling Gas Valve Pipe Bracket #10-16 x 1/2” Hex Head TEK Crimptite Screw 3/4” x 33-1/2” Black Nipple 3/4” Gas Shutoff Valve 3/4” Close Nipple 3/4” Black Union 3/4” Close Nipple 3/4” x 3/4” 90º Elbow 3/4” x 2” Nipple Flat Gas Pipe Bracket 1” x 1” 24 VAC CE Gas Valve Gas Valve Pipe Bracket 3-Port Manifold #4 Burner Orifice (natural gas) #30 Burner Orifice (liquid propane [L.P.] gas) Liquid Propane (L.P.) Conversion Kit 28-3/16” x 2-3/8” Burner Tube Burner Tube Rest CE Hot Surface Ignition (HSI) Module Burner Box Cover Plate Hot Surface Ignitor 2-1/2” 24 VAC Hot Surface Ignition (HSI) Flame Sensor #6-32 x 1/2” Right Hand Machine Screw #6-32 Pal Nut 330º Manual Reset Hi-Limit ONLY Hi-Limit Burner Bracket Burner Assembly Complete (natural gas) (includes illus. nos. 1 through 14 and 16 through 31) Burner Box Hot Surface Ignition (HSI) Mount Manifold Rest 1” x 1/2” Reducing Bushing 1” x 3/4” Reducing Bushing Ignitor/Flame-Probe Sight Hole Disc Sail Switch Assembly (refer to Sail Switch Assembly on page 22) * Contact reseller for elevations over 2,000 feet. ** Orifices are not included and must be ordered separately. 17 18 Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 72 Kw Electric Oven Assembly Part No. 816103 120011 150301 130400 150309 319200 154004 802799 122200 150303 105500 319202 154002 150309 120081 120080 152008 121011 153009 121032 353222 815707 153007 150512 819961 321503 321502 815710 156001 321501 Qty. 1 18 2 1 4 1 1 1 1 2 1 1 1 28 36 36 72 3’ 36 36 1 1 2 2 1 1 1 1 1 1 Description Electric Oven Box ONLY 4 Kw/240V Open Coil Element #8-18 x 7/16” Phillips Pan Head TEK Screw 290° Hi-Limit ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Sail Switch Box Twin Speed Nut Sail Switch Box Cover Sail Switch ONLY #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener #10-16 x 1/2” Hex Head TEK Crimptite Screw Internal Ceramic Insulator External Ceramic Insulator #10-32 Hex Nut Bus Bar #10 Star Washer #8 Rocktherm Connector Pipe Bracket Hi-Limit and Sail Switch Harness 1/4” Lock Washer 1/4-20 x 1/2” Long Bolt Burner Cover Assembly Right Front Oven Panel Left Front Oven Panel #8 Oven Assembly Wiring Caterpillar Grommet Oven Electrical Cover Oven Relay Box Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 -* Part No. 132004 131358 120706 150521 150309 150301 152014 121010 310669 120768 120765 135499 842552 Not illustrated. Qty. 1 1 1 2 8 5 2 2 1 3” 2 1 * Description Transformer T.S.P.T. 120-Amp - 24 VAC Relay Power Distribution Block 1/4-20 x 2” Carriage Bolt #10-16 x 1/2” Hex Head TEK Crimptite Screw #8-18 x 7/16” Phillips Pan Head TEK Screw 1/4-20 Free Spin Washer Nut L-170 Terminal Lug Box Cover 35 x 15mm Din Rail Din Rail End Stop 25-Amp/3 Pole Circuit Breaker Oven Relay Box Miscellaneous Wiring 19 20 Steam Damper Assembly Steam Damper Assembly Illus. No. 1 Part No. Qty. 2 3 4 5 6 7 165012 165019 153002 152004 152002 153007 820321 820331 1 1 6 6 4 4 2 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 153007 152002 115995 102350 151007 152007 100499 100500 152002 153007 100472 143110 100472 100496 143238 100498 150002 153010 152000 330987 152002 153007 100520 4 4 84 1 1 1 1 1 4 4 1 1 1 1 1 1 2 2 2 1 2 2 1 Description Steam Coil Assembly Steel Steam Coil Assembly (optional) 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) 1/4” Lock Washer 1/4-20 Hex Nut Steam Damper Gasket (sold by the inch) Gasket (68-12” length) 7/16-20 Stainless Steel Acorn Nut 7/16-20 Hex Nut 1-1/4” Bore x 3” Stroke Piston Piston Support Bracket 1/4-20 Hex Nut 1/4” Lock Washer 1/4” x 1/8” Connector 1/4” Tubing (sold by the foot) 1/4” x 1/8” Connector 1/8” Needle Valve 1/8” Close Nipple 3-Way Micro Valve 24 VAC #6-32 x 1” Round Head Machine Screw #6 Star Washer #6-32 Hex Nut Micro Valve Support Bracket 1/4-20 Hex Nut 1/4” Lock Washer 1/8” N.P.T. Silencer (muffler) 21 22 Sail Switch Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 9 319203 319202 319201 319200 154004 154002 150309 150303 122200 881706 1 1 1 1 1 1 4 2 1 1 10 105500 1 Description Sail Switch Mounting Bracket Sail Switch Damper (flat) Sail Switch Box Cover Sail Switch Box Twin Speed Nut 1/8” Push On Fastener #10-16 x 1/2” Hex Head TEK Crimptite Screw #4 x 3/4” Pan Head “A” Machine Screw Sail Switch ONLY Sail Switch Box Assembly Complete (includes illus. nos. 1 through 10) Sail Switch Actuator Rod Pneumatic Valve Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 Part No. 330987 836002 150111 152014 151000 100472 150002 100520 143268 100472 143115 Qty. 1 1 2 2 2 1 2 1 1 1 4 Description Micro Valve Bracket Air Jet Solenoid 1/4-20” Phillips Round Head Machine Screw 1/4-20” Free Spin Wash Nut #6-32 Pal Nut 1/4” x 1/8” Male Connector #6-32 x 1” Phillips Round Head Machine Screw 1/8” N.P.T. Silencer (muffler) 1/8” 90º Brass Straight Elbow 1/4” x 1/8” Male Connector 1/4” Poly-Flo Tubing (sold by the foot) 23 24 Reversing Relay Panel Assembly For 60 Hz Gas and Steam Models ONLY Reversing Relay Panel Assembly For 60 Hz Gas and Steam Models ONLY Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Part No. Qty. 150008 120701 323743 820187 2 1 1 1 820217 1 151000 152004 153002 121012 137060 137013 136057 150301 136008 132455 132448 820174 820134 2 1 1 1 1 4 1 3 1 1 1 1 820241 820216 1 --- 820173 819989 1 1 -- 820218 1 --- 842851 820186 1 1 Description #6-32 x 1-1/4” Phillips Round Head Machine Screw 4-Position Terminal Block Reversing Relay Panel Reversing Relay Panel Assembly 208-240V (includes illus. nos. 1 through 15) Reversing Relay Panel Assembly 480V (includes illus. nos. 1 through 15) #6-32 Pal Nut 5/16-18 Hex Nut 5/16” Lock Washer Ground Lug Arc Suppressor (A.S.) Board Nylon Standoff 0.5-Amp 3AG Slo Blo Fuse #8-18 x 7/16” Phillips Round Head TEK Screw Fuse Holder 9-Amp 2 HP Contactor Reversing Contactor 208-240V 3ø 60 Hz Transformer Assembly 480V/60 3ø Hz Transformer Assembly (for models mfd. as of July 19, 1999) 480V 3ø 60 Hz Transformer Assembly (for models mfd. prior to July 19, 1999) 480V 3ø 60 Hz Transformer Assembly (for steam models Only) 208-240V Reversing Relay Panel Wiring 480V Reversing Relay Panel Wiring (for models mfd. prior to July 19, 1999) 480V Reversing Relay Panel Wiring (for models mfd. prior to July 19, 1999) 208-240V Reversing Relay Panel 9-Pin Connector Wiring 480V Reversing Relay Panel 9-Pin Connector Wiring 25 26 Reversing Relay Panel Assembly For 50 Hz Gas and Steam Models ONLY Reversing Relay Panel Assembly For 50 Hz Gas and Steam Models ONLY Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 --- Part No. Qty. 150008 120701 323743 820219 2 1 1 1 820192 1 151000 152004 153002 121012 137060 137013 136057 150301 136008 132455 132448 820220 820188 842851 2 1 1 1 1 4 1 3 1 1 1 1 1 1 Description #6-32 x 1-1/4” Phillips Round Head Machine Screw 4-Position Terminal Block Reversing Relay Panel 380-416V 3ø 50 Hz Reversing Relay Panel Assembly (includes illus. nos. 1 through 15) For Gas Models ONLY 380-416V 3ø 50 Hz Reversing Relay Panel Assembly (includes illus. nos. 1 through 15) For Steam Models ONLY #6-32 Pal Nut 5/16-18 Hex Nut 5/16” Lock Washer Ground Lug Arc Suppressor (A.S.) Board Nylon Standoff 0.5-Amp (slo blo) Fuse #8-18 x 7/16” Phillips Round Head TEK Screw Fuse Holder ONLY 9-Amp 2 HP Contactor Reversing Contactor 380-416V 3ø 50 Hz Transformer Assembly 380-416V 3ø 50 Hz Reversing Relay Panel Wiring 380-416V 3ø 50 Hz Reversing Relay Panel 9-Pin Connector Wiring 27 28 Reversing Relay Panel Assembly For 60 Hz Electric Models ONLY Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 * * * * Part No. 150009 120701 323743 151000 152002 153021 121012 135501 150301 121502 132496 132497 131932 152004 153002 153525 112075 824198 824197 824199 Not illustrated. Qty. 2 1 1 2 1 1 2 1 2 3 1 1 1 1 1 1 1 1 1 1 Description #6-32 x 1-1/2” Phillips Pan Head Machine Screw 4-Position Terminal Block Reversing Relay Panel #6-32 Pal Nut 1/4-20 Hex Nut 1/4” Lock Washer Ground Lug 2-Pole 1-Amp Circuit Breaker #8-18 x 7/16” Phillips Head TEK Screw 1/2” Wire Standoff 9-Amp 2 HP Contactor with Coil Suppression Reversing Contactor with Coil Suppression Relay 5/16-18 Hex Nut 5/16” Lock Washer 1/4-20 x 1” Self Clinching Stud Ground Label Reversing Relay Panel Wiring Reversing Relay Panel 9-Pin Connector Wiring Reversing Relay Panel Plug Harness 29 Air Jet Assembly Illus. No. 1 2 3 4 5 Part No. 882157 143287 143259 143115 143154 Qty. 6 2 3 4 1 Description 1/4” Aluminum Tubing (sold by the foot) 1/4” x 1/8” M.P.T. Tee Bulkhead Fitting 1/4” x 1/8” F.P.T. 1/4” Diameter Poly-Flo Tubing 1/4” Poly Union 30 Illus. No. F.S.S. Temperature Probe Assembly Part No. Qty. 1 822752 1 2 3 4 5 154007 390390 150301 122647 122700 2 1 2 1 2 Description Fire Suppression System (F.S.S.) Temperature Probe Assembly (includes illus. nos. 1 through 5) Push On Fastener Sensor Bracket ONLY #8-18 Phillips Pan Head TEK Screw Connector ONLY Pins F.S.S. Solenoid Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 165114 143220 143251 143208 143099* 311588 143303 143155 150430 150301 143581 142888 824828 1 1 1 2 6’ 1 1 1 2 2 1 1 1 * Sold by the foot. Description Fire Suppression System (F.S.S.) Solenoid Valve 24V 50/60 Hz 3/8” F.P.T. Brass Tee 3/8” M.P.T. Brass Plug 3/8” Comp x 3/8” M.P.T. Brass Connector 3/8” OD x 0.035 Wall Copper Tubing Sprinkler Head Mounting Plate 3/8” N.P.T. Brass Locknut 3/8” Brass Elbow 90° #10 x 1/2” Self Drilling Screw #8-18 x 7/16” TEK Screw 3 GPM 3/8” F.P.T. Spray Nozzle 1/2” to 3/8” Bushing for Fire Suppression System (F.S.S.) Valve Arc Suppressor 31 32 Illus. No. 1 2 Back Draft Damper Assembly Part No. 883281 152014 Qty. 1 5 Description Back Draft Damper Assembly 1/4-20 Free Spin Wash Nut ADC 450596 1 - 05/01/02-15