D-line Hd10-a

Transcript

D-LINE HD10-A TWO-WAY SYSTEM DESCRIPTION The HD 10-A, with an exceptional full range, is the optimum choice for live sound and installed situations. Thanks to its deep bass punch, clean midrange output and accurate high frequencies, it offers the ultimate intelligibility in vocal and recorded music, from live sound to playback and from monitoring to fixed installation applications The concept of this unique speaker derives from the touring industry, bringing in a compact cabinet all the experience of RCF professional sound. The new 10” woofer is the result of the latest refinement in year of RCF experience in compact 2 way speakers. Features a 2,5 ” voice coil, very high efficiency and controlled bass reproduction. The 1” compression driver uses a new 1.7” voice coil dome design and optimised geometry radial phase plug. This innovative design is powered from a high flux magnet offering a very open and natural midrange sound with extreme precision in high frequency reproduction. RCF HD 10-A is equipped with a new generation of 600 Watt Digital Amplifier. RCF Class-D power amplifiers technology packs huge performance operating with high efficiency into a lightweight solution. D Line amplifiers deliver ultra fast attack, realistic transient response and impressive audio performance. The amplifier features a solid mechanical aluminium structure which not only stabilize the amplifier during transportation but also assist in the heat dissipation. All the D-LINE amplifiers presents SMPS power supply section in order to produce maximum output and minimum transportation weight. The integrated DSP manages crossover, equalisation, soft limiter, compressor and dynamic bass boost. Switchable EQ Mode make it easier to select among two different equalisation presets: Extended response switch, which slightly emphasizes the bass response for playback music and low volume applications and Linear response switch, for using the speaker to amplify a live mix. A useful Mic/Line switch to adjust the input sensitivity is provided. When used just for speech, the Mic setting allows to use a microphone directly with the speaker. Set the selector to Line when using the speaker for live music or playback. An easy to reach volume knob on the back allows to set the overall volume of the speaker according to its application. 3 status LEDs – Power / Signal / Status are provided for monitoring the system. D LINE cabinets are moulded on a special polypropylene composite material designed to dampen down vibrations even at maximum volume settings. From moulding to the final texture, D LINE offers the maximum reliability and strength for the intensive use on the road. The reflex porting has been resized to offer a better efficiency. The HD 10-A is equipped with a top handle and a side handle with rubber handgrip for greater portability. The new cabinet shape will allow every D-LINE model to be used in the standard configuration as well as in stage monitor model. Two M10 and 3 M6 threaded inserts are provided for optional mounting hardware in Installed Sound Applications. MAIN APPLICATIONS MAIN FEATURES • • • • • • • • • • Live Sound Rental Portable PA Stage Monitoring Clubs 1200 WATT PEAK, 600 WATT RMS Digital Bi-amp DSP Sound Processing RCF Precision Transducers SPL max. 129 dB D-LINE HD10-A Response -20dBu/1m Beamwidth vs. Frequency 110 360 Horizontal Beamwidth (1/3 Octave) Vertical Beamwidth (1/3 Octave) 330 300 100 Coverage Angle (Deg.) 270 dB SPL 90 80 240 210 180 150 120 90 70 60 30 60 20 100 1000 Frequency (Hz) 0 100 10000 HD10-A 1000 Frequency (Hz) 10000 HD10-A Normalized Horizontal off-axis Response Directivity Index and Q 5 20 100 18 0 16 -5 Total Q 10 10 8 6 Directivity index Di, dB 12 Attenuation in dB 14 -10 -15 -20 4 -25 2 1 100 1000 Frequency (Hz) 10000 0 -30 100 Normalized Vertical off-axis Response. Above the box 0 0 -5 -5 Attenuation in dB Attenuation in dB 5 -10 -10 -15 -30 100 HD10-A 10000 Normalized Vertical off-axis Response. Below the box 5 -25 1000 Frequency (Hz) HD10-A HD10-A -20 Horizontal ±10 degrees Horizontal ±20 degrees Horizontal ±30 degrees Horizontal ±40 degrees Horizontal ±50 degrees Horizontal ±60 degrees -15 -20 Vertical +10 degrees Vertical +20 degrees Vertical +30 degrees Vertical +40 degrees Vertical +50 degrees Vertical +60 degrees -25 1000 Frequency (Hz) 10000 -30 100 HD10-A Vertical -10 degrees Vertical -20 degrees Vertical -30 degrees Vertical -40 degrees Vertical -50 degrees Vertical -60 degrees 1000 Frequency (Hz) 10000 D-LINE HD10-A HORIZONTAL 1/3 POLAR PLOT Horizontal 1/3 Octave Polars 315 250 200 0° 330° 30° 300° 270° 0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 270° 150° 210° 2500 2000 1600 30° 300° 0 -48 -42 -36 -30 -24 -18 -12 -6 Horizontal 1/3 Octave Polars 240° 150° 210° 5000 4000 3150 10000 8000 6300 0° 30° 300° 270° 0 60° -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 240° 90° 0 120° 150° 210° 150° 180° HD10-A 150° 330° 120° 210° 180° 120° Horizontal 1/3 Octave Polars 90° 0 90° 0 180° 60° -48 -42 -36 -30 -24 -18 -12 -6 -48 -42 -36 -30 -24 -18 -12 -6 210° 30° -6 -12 -18 -24 -30 -36 -42 -48 -6 -12 -18 -24 -30 -36 -42 -48 240° 0° 240° 120° HD10-A 0 60° HD10-A 300° 270° 0 150° 330° 90° 0 270° 90° 0 30° 300° 180° 60° -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 1250 1000 800 0° 330° 120° HD10-A 0° 330° -6 -12 -18 -24 -30 -36 -42 -48 210° 180° Horizontal 1/3 Octave Polars 0 Horizontal 1/3 Octave Polars 60° 240° 120° HD10-A 30° 300° 90° 0 630 500 400 0° 330° 60° 240° 270° Horizontal 1/3 Octave Polars 180° HD10-A VERTICAL 1/3 POLAR PLOT Vertical 1/3 Octave Polars 315 250 200 90° 120° 60° 150° 180° 0 -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 0 2500 2000 1600 60° 210° 0 5000 4000 3150 60° -48 -42 -36 -30 -24 -18 -12 -6 0 300° 10000 8000 6300 90° 60° 150° 180° 0° 0 30° -6 -12 -18 -24 -30 -36 -42 -48 -48 -42 -36 -30 -24 -18 -12 -6 210° 0 330° 300° 240° HD10-A 0° 270° 120° 300° 270° 0 330° Vertical 1/3 Octave Polars 330° 240° HD10-A -48 -42 -36 -30 -24 -18 -12 -6 240° 30° -6 -12 -18 -24 -30 -36 -42 -48 -6 -12 -18 -24 -30 -36 -42 -48 210° 90° 210° 300° 270° 0 60° 30° HD10-A 150° 180° 0 300° 120° 0° 180° 0° 330° Vertical 1/3 Octave Polars 330° 240° 0 1250 1000 800 90° 120° 150° 270° 30° -48 -42 -36 -30 -24 -18 -12 -6 -48 -42 -36 -30 -24 -18 -12 -6 240° 150° -6 -12 -18 -24 -30 -36 -42 -48 -6 -12 -18 -24 -30 -36 -42 -48 HD10-A 90° 120° 0 0 Vertical 1/3 Octave Polars 30° 210° 270° Vertical 1/3 Octave Polars HD10-A 180° 0° 300° 240° 60° 150° 330° HD10-A 630 500 400 90° 120° 30° 210° 180° Vertical 1/3 Octave Polars 270° 0° D-LINE HD10-A 13040003 - 230Volt AC S260 Steel speaker floor stand with folding base and telescopic rod, tube diameter 35mm. Load capacity up to 60kg, Weight 7.8 Kg, H MIN/MAX 170cm/240cm. Length once folded 123cm AC S140 Aluminium speaker floor stand with folding base and telescopic rod, tube diameter 35mm. Load capacity up to 40kg, Weight 2.7 Kg, H MIN/MAX 140cm/214cm. Length once folded 107cm AC PRO-FS Steel speaker floor stand with folding base and telescopic rod, tube diameter 35mm. Load capacity up to 50kg, Weight 4.5 Kg, H MIN/MAX 137cm/210cm. Length once folded 102cm AC PRO-LF Steel professional adapter sleeve for speaker floor stand, tube diametro 35 mm. Load capacity up to 50Kg, Weight 0.7 Kg, H 27.5 cm AC PRO-PM Steel pole mount accessory for a satellite speaker on a subwoofer, tube diametro 35 mm. Load capacity up to 35Kg, Weight 2.4 Kg, H MIN/MAX 95cm/137cm AC EB4X Kit including No. 4 shouldered 10mm eye bolts AC PMA Speaker pole mount AC HD-FD 10 H-BR Horizontal bracket for HD10-A and FD 10-A speakers Cover HD-FD 10 Cover for HD10-A and FD 10-A speakers 13040004 - 115 Volt DimensionS (All data are in mm) 303mm (11.93”) 146mm (5.75) 68mm (2.68) 140mm (5.51) 237mm (9.33) N° 1 INSERTO7INSERT M10 ANCHE SUL LATO OPPOSTO ALSO ON THE OPPOSITE SIDE N° 1 INSERTO7INSERT M10 ANCHE SUL LATO OPPOSTO ALSO ON THE OPPOSITE SIDE 28mm (1.10) 28mm (1.10) 527mm (25.75”) 302mm (11.91) 1.0-J-F ACCESSORIES PART NUMBERS ACOUSTICAL SPECIFICATIONS Frequency response: 50 Hz- 20 Khz Max SPL: 129 dB Horizontal coverage angle: 90° Vertical coverage angle: 60° Compression driver: 1.0”, 1.7” voice coil Midrange: Woofer: 10”, 2.5” voice coil INPUT SECTION Input signal (Impedance): Input/Output connector: Input sensitivity: bal/unbal Jack-XLR male -2 dBu / + 4 dBu PROCESSOR SECTION Crossover frequencies: Protections: Sensitivity control: Limiter: High pass: Controls: 1700 Hz Themel, RMS yes fast limiter Volume, EQ shape, Mic/line RCF products are continually improved. All specifications are therefore subject to change without notice. AMPLIFIER Power supply: High frequencies: Mid frequencies: Low frequencies: Cooling: Connection: switching 600 Watt D / 150 Watt D / 450 Watt convection Xlr/jack input, xlr signal output Physical Height: Width: Depth: Weight: Cabinet: Hardware: Handles: Pole mount cap Colour: 527 mm (20.74”) 303 mm (11.92”) 303 mm (11.92”) 13.9 kg (30.64 lbs) Composite PP pole mount 1 top, 1 side yes Black www.rcf.it