D2: Seismic 4-post Frames - Newton Instrument Company

Transcript

Phone: (919) 575-6426 Fax: (919) 575-4708 www.eNewton.com Phone: (919) 575-6426 Fax: (919) 575-4708 4-Post Frames www.eNewton.com newton seismic enclosure Modified:07/24/2012 Materials: ore R-63 - c NEBS / G 250 lbs. o 1 Tested t o Z ne 4 • • • • Frame : 11 gauge steel fully welded chassis Doors : 13 gauge steelSide Panels : 16 gauge steel Mounting Uprights : Zinc-plated 11 gauge steel Features: • Securable side panels with removable cross-connect openings. Easy to lift and remove. • 3-point, keyed locks on front and rear doors. Available in multiple key-codes. Set of four (4) mounting uprights interchangeable to either 19” or 23” rack-mount orientation with cable management slots for cable ties. See below for mounting pattern options. • Quick-release, spring-hinged doors for easy access for setup and maintenance. See below for door options. • ¼”-20 grounding points located throughout enclosure. • No side cross-bracing for quickand easy side access. • Open base design for under-floor cable routing. • Multiple fan options available. D2 s84 23 30 D F e s84: 84˝ height seismic cabinet, F: MOunting HOLE pattErn 23˝ equipment width 30˝ deep D : Fan OptiOn 0 = No fan / louvered top panel 2 = Four (4) AC fans @ 408 CFM 3 = Four (4) DC fans @ 408 CFM 208 0 = 1” hole spacing 1 = 1¼“-½“ EIA wide spacing 2 = 5/8”-5/8”-½“ EIA universal spacing xx 99 = White Wrinkle 64 = Blue Wrinkle 45 = Black Wrinkle 44 = Gray E : DOOr cOnFiguratiOn 0 = Solid rear door with louvers / solid front door with louvers 1 = Solid rear door with louvers / bronze (smoked) Plexiglas window front door with louvers 3 = Perforated rear door / perforated front door 9 = No Doors (front / back) or side panels. The information this(NIC). drawing the sole property Instrument Company Inc (NIC). Any is reproduction The information contained in this drawing is the sole property of Newton Instrumentcontained CompanyinInc Anyisreproduction in partoforNewton whole with out the written permission of NIC prohibited in part or whole with out the written permission of NIC is prohibited 4-Post Frames Phone: (919) 575-6426 Fax: (919) 575-4708 www.eNewton.com Phone: (919) 575-6426 Fax: (919) 575-4708 www.eNewton.com SEISMIC ENCLOSURE, 7’ X 30” X 36” Modified:08/21/2015 Materials: core GR-63 . NEBS / 0 5 11 lbs Tested to 4 Zone • • • • Frame : 11 gauge steel fully welded chassis Doors : 13 gauge steel Side Panels : 16 gauge steel Mounting Uprights : Zinc-plated 11 gauge steel Features: • • • • • • • • Securable side panels with removable cross-connect openings. Easy to lift and remove. 3-point, keyed locks on front and rear doors. Available in multiple key-codes. Set of four (4) mounting uprights interchangeable to either 19” or 23” rack-mount orientation with cable management slots for cable ties. See below for mounting pattern options. Quick-release, spring-hinged doors for easy access for setup and maintenance. See below for door options. ¼”-20 grounding points located throughout enclosure. No side cross-bracing for quick and easy side access. Open base design for under-floor cable routing. Multiple fan options available. 84 30 36 D2 S84 s84: 84˝ high seismic cabinet 30˝ width 36˝ deep D : FAN OPTION 0 = No fan / louvered top panel 1 = Four (4) AC fans @ 408 CFM 30 36 D E F XX 64 = Blue Wrinkle 45 = Black Wrinkle 0 = 1” hole spacing Note: 44 = Gray 1¼“-½“ EIA wide •1 = Available only as aspacing 4-post frame or with Perforated Doors. 2 = 5/8"-5/8-1/2 EIA Universal F: MOUNTING HOLE PATTERN E : DOOR CONFIGURATION 0 = Solid front & rear doors with louvers and solid sides 1 = Perforated front & solid rear doors and solid sides 3 = Perforated rear door / perforated front door 8 = Plexiglass front door / solid rear door, no sides panels. 9 = No Doors (front / back) or sides/top panels. *** note: side panels can be ordered separately. Doors can only be ordered at original time of purchase and can not be added at later time. 209 The information contained in this drawing is reproduction the sole property of Newton Inc (NIC). The information contained in this drawing is the sole property of Newton Instrument Company Inc (NIC). Any in part or whole Instrument with out the Company written permission ofAny NICreproduction is prohibited in part or whole with out the written permission of NIC is prohibited Phone: Phone: (919) (919) 575-6426 575-6426 Fax: Fax: (919) (919) 575-4708 575-4708 www.eNewton.com www.eNewton.com 4-Post Frames FRAME SUPPORT KIT Modified:10/08/2009 Ordering Part Number A 22007700xx 18 22007702xx 24 A Phone: (919) 575-6426 Fax: (919) 575-4708 www.eNewton.com CABLE ACCESS BUSHING KIT Modified:09/22/2009 Ordering Part Number QTY 2200800100 4 2200800200 6 Phone: (919) 575-6426 Fax: (919) 575-4708 www.eNewton.com TOP-MOUNT FAN TRAY Modified:10/08/2009 D2 A Ordering Part Number description Fan 21983600xx Louvered panel without fan 21983601xx Single 115 vac fan @ 550 CFM A 21983602xx Four 115 vac fans @ 408 CFM total B 21983603xx Four low profile 48 VDC fans@ 408 CFM total B 22021200xx Louvered panel with out fan Notes: • All kits with fans included; also includes a 8’ grounded power cord. B 210 The Theinformation informationcontained containedininthis thisdrawing drawingisisthe thesole soleproperty propertyofofNewton NewtonInstrument InstrumentCompany CompanyInc Inc(NIC). (NIC).Any Anyreproduction reproductionininpart partororwhole wholewith without outthe thewritten writtenpermission permissionofofNIC NICisisprohibited prohibited