Transcript
HF DRIVER
D280Ti-B
Professional Compression Driver
Key Features · 1.75”Voice Coil, 1”Exit Bolt-On · 80 Watts Continuous Power Handling · 110 dB Sensitivity · 1,200-20,000 Hz · Titanium Diaphragm
GENERAL SPECIFICATIONS Exit Throat Diameter
25/1
mm/in
Nominal Impedance
8
ohm
80
Watts
160
Watts
Sensitivity
110
dB
Minimum Crossover Point
1,200
Hz
Frequency Response
1,200-20,000 Hz
Diaphragm Material
Titanium
Voice Coil Material
CCAW
Voice Coil Diameter
1.75/44.4
Voice Coil Former Material
Kapton
Inductance
0.11
mH
Flux Density
1.65
T
Magnet Material
Ferrite
RMS Power
1
Musical Program Power
1
2
115mm (4.52in)
in/mm 25mm (1in)
50mm (2in)
MOUNTING AND WEIGHT INFORMATION Overall Diameter
4.52/115
in/mm
Overall Depth
2/50
in/mm
Mounting Bolt-on
M6 x 2
3in/76.2mm
M6 x 3
2.4in/61mm
3.65/1.65
Lbs/Kgs
Net Weight
Frequency Response Measured at 2.83v/1m dB 111
1
With Crossover at 2kHz, 12db octave 2 On WG11-25 horn (2.83v@1m)
105 99 93
NOTE: Driver must be connected to a crossover that meets recommended specifications. NOTE: Products are subject to change without notice, please check PRVAudio.com for the latest datasheet.
87 81 75 69
PRV AUDIO USA (USA and Export) MIAMI, FL
[email protected] http://www.prvaudio.com
PRV AUDIO BRAZIL (Brazilian Sales Only) SAO LEOPOLDO, RS
[email protected] http://pvaudio.com.br
63 57 100 Hz
500
1K
5K
10 K
20 K
PRV Audio strives to manufacture the best drivers in the Professional Loudspeaker industry. Specifications are subject to change due to continuous product improvement - Rev: 06/13
