Transcript
Getting Started
1.1 Load Rechargeable Li-ion battery 1.1.1 Insert the battery according to the correct polarity marks( + or -). 1.1.2 Close the battery cover firmly. 1.2 1.2.1 1.2.2 1.2.3
Li-ion battery
Inserting and Removing an SD Card（Optional） Insert an SD card. When using an SD card, the built-in memory will be disabled. To remove an SD card, press it down and take it out. Ports Slide Cover
Picture Shutter Button Speaker
ENGLISH
ENGLISH
1.
Power Button
SD Card
Tele/Wide Button
2.2
Record Movies and Pictures ● Press [Movie Shutter ] button to start movie recording while in recording mode, press again to stop recording. ● Press [Picture Shutter ] button to capture image while in recording mode.
2.3
Using Intelligent Lighting Button ● When recording movies or taking pictures, press Intelligent Lighting ( ) Button to extend dynamic range for backlight and high contrast sense so that the objects will be brighter and clearer. ● Press Intelligent Lighting ( ) Button again to exit.
2.4
Option Menu: Movie Mode
Microphone
HD D1 VGA
Resolution
Lens Flash
1.3
1.4
2
TV Port
HDMI Port
Mini USB 2.0/ Battery Charging Port
Macro Mode
Turn on the camera ● Flip out the LCD panel or hold [Power ] Button for one second. ● When the camera is turned on, the green LED will light up. ● If no operation is made in 3 minutes, the camera will turn itself off automatically to conserve battery power.
320 x 240
Macro
Focus Range: 1cm~30cm
+0.3EV 0EV -0.3EV -0.6EV -1.0EV
Daylight
White Balance
Record Mode
Camera Control and Displays Up Button Use Right/Left/Up/Down buttons for general OK/Enter Button settings; or press [OK/Enter] button for option setting under Record Mode. Left Button Movie Shutter Button 2.1.1 Function of Buttons Down Button ● [Right] Button: Flash Auto/Red Eye Reduction/OFF Right Button Record/Play ● [Left] Button: Self-timer ON/OFF Button ● [Up] Button: Intelligent Lighting ON/OFF ● [Down] Button: HD Mode ● [Tele] Button : Zoom In ● [Wide] Button :Zoom out ● [OK/Enter ]Button: Menu ON ● [Record/Play] Button: Switch between Record and Playback Mode/Exit the Menu /Return to the previous page ● [Movie Shutter ]Button: Record Movie ● [Picture Shutter ] Button: Capture picture
Select one of the 7 exposure compensation values (-1.0 to+1.0 EV)
Use under outsides light condition
Fluorescent Use under fluorescent light condition
Stabilization
2.1
Focus Range: 30cm~infinite
Adjust with nine sharpness settings to soften or sharpen movie Automatic adjustment Auto
Sharpness
Turn off the camera Turn off the camera by: ● Return the LCD panel back to its original position. ● Press the [Power ] Button for one second.
640 x 480
QVGA Normal +1.0EV +0.6EV
Exposure
1280 x 720 720 x 480
Night Mode
Tungsten
Use under tungsten light condition
On
Correct camera shake instantly, giving you smooth and stable video
Off On
Disable motion stabilization Enable the Night Mode Disable the Night Mode
Off
Camera Mode Resolution
Macro Mode
High
3744 x 2808 (11MP)
Std Low
2592 x 1944 (5MP)
Normal
1600 x 1200 (2MP) Focus Range: 30cm~infinite
Macro
Focus Range: 1cm~30cm
+1.0EV +0.6EV
Exposure
+0.3EV 0EV -0.3EV -0.6EV -1.0EV
Two in One
On Off
Select one of the 7 exposure compensation values (-1.0 to +1.0 EV) Combine two snapshots into one frame Disable two in One
Add photo frame to the picture
Auto Flash Selftimer Sharpness White Balance
Multi-snap Backlight Date Printing Night Mode
The flash fires automatically according to light conditions.
Red Eye The pre-flash will fire to reduce the red-eye effect. Reduction The flash will not fire in any light condition. Off Activate 10-second delay Selftimer On Off Disable Selftimer Adjust with nine sharpness settings to soften or sharpen picture
Fluorescent
Automatic adjustment Use under outsides light condition Use under fluorescent light condition
Tungsten On Off
Use under tungsten light condition Take 5 continuous pictures at one time Disable Multi-snap
On
Brighten the object when its background is much brighter than the object
Off On Off On Off
Disable Backlight mode Imprint the date on picture Disable Date Printing Enable Night Mode Disable Night Mode
Auto Daylight
ENGLISH
Photo Frame
2
ENGLISH
1
3.
Playback Mode
3.1
Camera Control and Display ● Press the [Record/Play] button ( ) to switch from Record Mode to Playback Mode Main Menu. ● There are 2 options in the Playback Mode, movie and picture. ● Direction Buttons can be used to select the specific option. ● Press OK Button to view movies or pictures. ● In Movie Playback Mode, press [Movie Shutter ] button to view movies.
3.1.1 Function of Playback Buttons: ● [Left] Button: Last movie, picture. ● [Right] Button: Next movie, picture. ● [Tele] Button : Zoom In.(only picture mode) ● [Wide] Button
● [Record/Play ] Button: Switch between Playback and Record Mode. ● [OK/Enter] Button: Enter to movie or picture option menu. Up Button OK/Enter Button Left Button
Format Memory /Format Card TV System Language Information Default Setting
No special effects applied to the picture Picture is converted to black-and-white Sepia look is applied to the image The image is converted as the negative of the normal
3.2
View Movies ● In Playback Mode, press the Direction button to select Movie then press [OK/Enter] button to select movie options. ● Use [Right] or [Left] buttons to locate the movie you want to delete, lock, repeat, or thumbnail view. ● Select [Exit] to go back to select movie menu. ● Use [Right] or [Left] buttons to locate the movie you want to view. ● Press [Movie Shutter ] button to start the movie playing, then press it again to pause or stop. ● While playing a movie, press down [Right] or [Left] button to fast-forward / rewind, then release the button to stop. ● Use [UP] or [Down] buttons to adjust volume.
3.3
View Pictures ● In Playback Mode, press the Direction button to select Picture then press [OK/Enter] button to select picture options. ● Use [Right] or [Left] buttons to locate the picture you want to delete, lock, thumbnail-or slideshow view. ● Select [Exit] to go back to select picture menu.
On: Enable operation sound ; Off: Disable operation sound Set up Date and Time Yes: Format Memory/ card ; No: Do not format Memory/ card NTSC (60Hz): TV output setting is NTSC standard PAL (50Hz): TV output setting is PAL standard English, German, French, Italian, Spanish, Portuguese, Simplified Chinese, Traditional Chinese, Korean, Japanese. On: Show the indicator(s) on the LCD screen. Off: Do not show the indicator(s) on the LCD screen. Yes: Restore default factory setting No: Do not restore default factory setting
4
Playback
Delete single or all selected movies or pictures
Thumbnail
Stored movies and pictures can be viewed as nine thumbnails
Lock
Protect the movies and pictures from being deleted accidentally
Slide Show (Picture only)
4.
:The LCD Panel does not work when the camera is connected to a TV.
6.
Install Bundled Software
6.1
Install Video Codec to view movies correctly on PC You can share the recorded movies to your friends via internet or CD. When playing a movie for the first time, Video Codec should be installed in PC. Video Codec is available in the provided CD.
Repeat single movie Repeat all movies Display pictures one after another in turn
6.2 Install and use the bundled ArcSoft application software to edit the movies or pictures 6.2.1 To install the bundled software:(1)Insert the CD-ROM into your computer’s CD-ROM drive. The autorun screen appears.(2)Select the piece(s) of software you want to install from the list, then click Install Application Software. 6.2.2 Follow the on-screen instructions to complete the installation. ● ArcSoft MediaConverter can convert multiple video formats into compatible format with your camera. ● ArcSoft MediaImpression is a user-friendly application that helps you managing your media for you, and gives you funny and exciting ways to create and share projects featuring your photo and video files. Support the feature of uploading videos easily to YouTube.
Viewing Movie on PC
4.1 Transferring and viewing movies and pictures on the computer 4.1.1 Connect the computer and camera with the supplied mini USB2.0 cable. 4.1.2 Movies can be found on your computer at “My Computer\Removable Disk\DCIM\200MOVIE” and picture(s) can be found on your computer at “My Computer\Removable Disk\DCIM\100PHOTO” 4.1.3 Under these folders, you can read, delete, move, or copy any movie/picture you want.
5.
5.2.2 Connect the other end of the cable to a TV. 5.2.3 The steps for viewing stored pictures and movies on a TV are exactly the same as for viewing them on the LCD monitor.
Picture Playback Mode
Delete
Repeat (Movie only)
ENGLISH
Description Movie Playback Mode
ENGLISH
Option Menu: Option
Right Button
Record/Play Button
3
3.4
Movie Shutter Button
Down Button
Motion Detect On Start video recording while detecting movements of object(s) Disable motion detection Off Effect Normal B/W Classic Negative SET Setting Sound Time Setting
: Zoom out.(only picture mode)
Viewing Pictures and Movies on a TV
5.1 Connecting to a high-definition TV 5.1.1 Connect HDMI cable to an HD TV. 5.1.2 The steps for viewing stored pictures and movies on a TV are exactly the same as for viewing them on the LCD monitor.
:The detailed information can be found in online help of all the bundled software.
7.
Video File Converter Bundled software CD contains ArcSoft MediaConverter which can convert multiple viedo formats into compatible format with your camera. In this way, you can convert various format of video files and playback your favorite movies on your camera.
8.
Burning the Recorded Clip into DVD Bundled software CD contains ArcSoft MediaImpression which allows burning the movie clip onto DVD. You can preserve your precious movies on DVD to share with family and friends.
Note :The camera can not run movie recording and picture taking when it is connected to a high-definition TV. The LCD Panel does not work when the camera is connected to ahigh-definition TV.
5.2 Connecting to a non-high-definition 16:9 (Wide) or 4:3 TV 5.2.1 Connect one end of the AV cable to your camera's AV Out port.
9.
Upload video to YouTube Bundled software CD contains ArcSoft MediaImpression which supports the feature of uploading videos easily to YouTube.
5
If the LCD image is not clear when shooting, how can the focus be adjusted? Try to switch between Macro and Normal Mode in order to check the lens whether on the proper position or not for the object(s).(Macro Mode: For object(s) in distance of 1cm-30cm, Normal Mode: For object(s) in distance beyond 30 cm)
10.2
How to shoot correctly? First properly adjust the focus, then after pressing the shutter button, the LCD shows a “funnel” marking in the center of the screen to record the image. Firmly you’re your camera before the “funnel” marking disappears, then you can get a clear picture.
10.3
The flash is not working. The camera is in Macro Mode. The battery power is low.
10.4
When recording, the digital zoom does not function. If the “Stabilization” function is activated when recording movies, the “Tele/Wide” button for digital zooming will be disabled.
10.5
The files on the memory card do not display smoothly when the LCD shows the “!” or “funnel” marking. The “!” means the file format is not supported and the “funnel” marking indicates the file is not read smoothly. Delete these files and the others can then be played normally. It is recommended that you first format the memory card before using it and avoid placing files with different formats in the same folder.
10.6
Why is camera Flash not active when taking pictures? Make sure that the focus range is NOT set at Macro mode, as flash is disabled in this mode. Scroll through Camera modes and set Flash as Auto ; note that Flash OFF is the default pre-set mode for normal picture -taking. In Auto mode camera flash fires ONLY when necessary (in dark setting as example).
10.7
Why do some of my indoor pictures look blurry and dark? Camera extends pictures exposure time under low light/ indoor condition. Keep camera (and photographed subject) steady for several seconds when taking pictures. Shutter will sound when picture has been taken.
10.8
How do I charge battery? Computer will not charge battery when connected. You must use ONLY the supplied AC charger. Camera must be turned OFF; blinking light confirms charging, but light is constant when charging has been completed.
7
ENGLISH
10.1
ENGLISH
10. Simple Troubleshooting
6
8
