Transcript
D-78 Parts Manual J.L.A. Meadowcroft Lane, Halifax Road Ripponden W. Yorkshire, England HX6 4AJ Telephone: 1 422 822282 / Fax: 1 422 824390
052302JCARRITA/rmoles
ADC Part No. 450593
Retain This Manual In A Safe Place For Future Reference This product embodies advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. The manufacturer reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.
Important For your convenience, log the following information: DATE OF PURCHASE ____________________________
D-78
MODEL NO. __________________________________________
DISTRIBUTOR’S NAME ___________________________________________________________________________________ Serial Number(s)
________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________
Replacement parts can be obtained from your distributor or J.L.A. When ordering replacement parts from the factory, you can FAX your order to J.L.A. at 1 422-824390 or telephone your order directly to the J.L.A. Parts Department at 1 422-822282. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.
Table of Contents Control Door Assembly For models mfd. as of July 1, 2002 .................................................................................................. 2 Control Door Assembly For models mfd. prior to July 1, 2002 .............................................................................................. 3 Phase 7 OPL Microprocessor Control Panel Assembly .......................................................................... 4 Front Panel Assembly ............................................................................................................................ 5 Main Door Assembly (Round Door) ...................................................................................................... 6 Main Door Switch Assembly.................................................................................................................. 7 Sensor Bracket Assembly ...................................................................................................................... 8 Lint Trap Assembly ................................................................................................................................ 9 Drop Lint Door Assembly .....................................................................................................................10 Basket (Tumbler) Support Assembly .....................................................................................................11 Idler Bearing Assembly .................................................................................................................. 12, 13 Basket (Tumbler) Bearing Assembly................................................................................................ 14, 15 Rear Electric Relay Panel Assembly ......................................................................................................16 Reversing Electric Relay Panel Assembly ...............................................................................................17 Non-Reversing Motor Mount Assembly .......................................................................................... 18, 19 Reversing T.E.F.C. Motor Mount Assembly .................................................................................... 20, 21 Direct Spark Ignition (DSI) Burner Assembly For models mfd. as of July 1, 2002 ........................................................................................... 22, 23 Hot Surface Ignition (HSI) Burner Assembly For models mfd. prior to July 1, 2002 ....................................................................................... 24, 25 Sail Switch Assembly ............................................................................................................................26 S.A.F.E. Temperature Probe Assembly .................................................................................................27 S.A.F.E. Solenoid and Piping Assembly ................................................................................................28 Back Guard Assemblies ........................................................................................................................29 Additional Parts Available .....................................................................................................................30
Control Door Assembly
2
For models mfd. as of July 1, 2002
Illus. No.
Part No.
Qty.
1
883474
1
2 3 4 5 6 7 8
150314 117604 150317 102502 154011 102603 102601
2 4 2 1 4 1 1
Description White Control Door Assembly (includes illus. nos. 1 and 3) #10-32 x 1/2” TORX Screw 1/8” x 3/8” Noise Tape (sold by the foot) #10-16 x 3/4” TORX Plus BTN Control Door Support Rod #10-32 Multi-Thread U-Nut Control Door Support Rod Catch Control Door Rod Retainer Clip
Control Door Assembly
3
For models mfd. prior to July 1, 2002
Illus. No.
Part No.
Qty.
1
883336
1
2 3 4 5
150314 117604 --------* 154011
4 2 1 4
*
Contact reseller for logo.
Description White Control Door Assembly (includes illus. nos. 1 and 3) #10-32 x 1/2” TORX Plus Noise Suppressor Tape (sold by the foot) Logo #10-32 Multi-Thread U-Nut
4
Phase 7 OPL Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1 2
112571 850984 883301
1 1 1
3 4 5 6 7
883277 150005 153010 136016 136097
1 2 2 1 1
Description Phase 7 OPL Keyboard (touch pad) Phase 7 Microprocessor Controller (computer) Panel ONLY Phase 7 OPL Reversing Microprocessor Controller (computer) Control Panel Assembly Complete (includes illus. nos. 1 through 7) Phase 7 OPL Microprocessor Controller (computer) ONLY #6-32 x 3/4” Phillips Round Head Machine Screw #6 Star Washer 5-Amp Fuse 500 mA Fuse
Front Panel Assembly
Illus. No.
Part No.
Qty.
1
883246*
1
2 3 4 5
150313 150318 116147 122002 881987
11 ** 2 1 1
6 7 8
154215 116320 116321
2 1 1
* Specify color when ordering. ** As needed.
5
Description Right Hand Front Panel Assembly (includes illus. nos. 1, 3, 5, and 6) #10-16 x 1/2” TORX Plus BTN Type 1 25 IP Stick-Fit TORX Plus Bit 13 x 18-1/2” Rear Lower Wall Insulation Lint Drawer Switch Friction Door Latch Kit (includes illus. nos. 5 and 6) 5/32” Pop Rivet Top Front Panel Insulation Bottom Front Panel Insulation
Main Door Assembly (Round Door)
6
Illus. No. 1 2 3 4 5 6 7 8 9 10
Part No.
Qty.
883252 151010 150120 152014 102214 102357 151013 150683 883251 883249 883250
1 1 1 6 1 1 4 6 1 1 1
Description Large Cold Rolled Steel (CRS) Black Main Door Handle #10-32 Black Hex Acorn Lock Nut #10-32 Door Latch Screw 1/4-20 Free Spin Wash Nut 30” Door Glass Large Steel Door Gasket #10-32 Black Acorn Nut 1/4-20 x 5/8” Carriage Bolt Large Black Main Door Hinge Black Main Door Assembly Complete Large 37-1/4” Black Door Ring ONLY
Main Door Switch Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6
150006 152013 153010 137005 150445 882866 883338
2 2 2 1 4 1 1
7 8
150301 881151
2 1
9
881152
1
10
153031
1
Description #6-32 x 7/8” Phillips Pan Head Machine Screw #6-32 Hex Nut #6 Star Washer Single-Pole Door Switch (SDS) 1/4-20 x 3/4” Black Cap Screw Main Door Switch Housing ONLY Main Door Switch with Housing Assembly (includes illus. nos. 1 through 4 and 6) #8-18 x 7/16” Phillips Pan Head TEK Screw Bottom Hinge Block (includes illus. nos. 5, 8, and 10) Top Hinge Block (includes illus. nos. 5 and 9) Nylon Washer
7
8
Sensor Bracket Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6
130103 153010 152000 154007 150005 881912
1 2 2 2 2 1
7
880251
1
8 9 10 11 12
122605 122701 121028 150301 122604 122700 122801
1 4 2 2 1 4 1
Description 225º F Large Automatic Thermostat ONLY #6 Star Washer #6-32 Hex Nut 1/4” Tinnerman Push On Fastener #6-32 x 1/4” Phillips Round Head Machine Screw Temperature Sensor Bracket Complete (includes illus. nos. 1 through 9) 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 7 through 9) 4-Pin Socket Connector Socket Terminal ONLY Insulated Terminal ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw 4-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool (for removal of illus. nos. 8 and 12)
Lint Trap Assembly
Illus. No.
Part No.
Qty.
1
881904
1
2 3 4 5
801767 154200 150300 304100 800500
1 7 3 1 2
9
Description Lint Coupe Assembly Complete (includes illus. nos. 1 and 3 through 5) Lint Coupe ONLY 5/32” Pop Rivet #10-16 x 1/2” Hex Washer TEK Screw Lint Screen Hold Down Lint Screen
10
Drop Lint Door Assembly
Illus. No.
Part No.
Qty.
1 2 3
883339 117604 170226
1 5 1
Description White Drop Lint Door 1/8” x 3/8” Neoprene Sponge Tape Slide Latch
Basket (Tumbler) Support Assembly
Illus. No.
Part No.
1
883366 801747 801774 150500 100912 116006 401010 153011 153026 152011 301701 314697 150413
2 3 4 5 6 7 8 9 10 11 *
As required.
Qty. 1 1 1 1 8 1 1 8 8 8 * 4 32
Description Basket (tumbler) and Support Assembly Basket (tumbler) ONLY without Felt Collar Basket (tumbler) Support ONLY 5/16-18 x 3/4” Socket Button Head Screw 1/2-13 x 25-3/8” Tie Rod Felt Collar Felt Collar Adhesive 1/2” Flat Washer 1/2” Lock Washer 1/2-13 Hex Nut Basket (tumbler) Shims Basket (tumbler) Ribs #10-16 x 1/2” TORX Crimptite Screws
11
12
Idler Bearing Assembly
13
Idler Bearing Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6
100185 101140 100178 154301 100705 883473
1 1 1 2 1 1
7 8 9 10 11 12
150617 153005 153004 801009 152005 150623
2 2 2 1 1 1
Description 5L-780 V-Belt 14” x 3” Compound Pulley 4L-570 V-Belt (idler to motor) 5/16-18 x 1” Allen Setscrew 3/16” x 3/16” x 1-3/8” Key Idler Bearing Assembly Complete (includes illus. nos. 5 through 12) 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer Idler Square Washer 3/8-16 Hex Nut 3/8-16 x 5” Hex Head Machine Bolt
14
Basket (Tumbler) Bearing Assembly
Basket (Tumbler) Bearing Assembly
Illus. No.
Part No.
Qty.
1 2 3 4
100244 153025 152050 801775
1 4 4 1
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
801761 100245 150633 153011 153011 153026 152011 154322 152004 150621 153002 153001 150621 314746 883386 150413 882111 101220 100719 100185 152004 150610 102102 401010
1 1 2 2 2 2 2 2 2 2 4 6 4 1 1 2 1 1 1 1 2 2 1 1
Description 1-15/16” Flange Bearing Lock Washer Hex Nut Pillow Block Bearing Assembly Complete (includes illus. nos. 4 through 13) Pillow Block Bearing Housing ONLY 1-15/16” Pillow Block Bearing 1/2-13 x 2-1/4” Hex Head Bolt 9/16” Flat Washer 9/16” Flat Washer 1/2” Lock Washer 1/2-13 Hex Nut 3/8-24 x 7/16” Setscrew 5/16-18 Hex Nut 5/16-18 x 1-1/2” Allen Setscrew 5/16” Lock Washer 5/16” Flat Washer 5/16-18 x 3/4” Hex Bolt Rotational Sensor Bracket Rotational Sensor Assembly #10-16 x 1/2” Phillips Hex Head TEK Crimptite 18” Pulley with Rotation Sensor Magnet 1-15/16” Taper Lock Bushing 1/2” x 1/2” x 1-3/8” Key 5L-780 V-Belt 5/16-18 Hex Nut 5/16-18 x 1-1/2” Allen Setscrew Rotational Sensor Magnet Adhesive for Magnet
15
16
Rear Electric Relay Panel Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5
151000 150300 150008 120716 322812 822798
2 2 2 1 1 1
6 7 8 9 10 11 12 13 14 15
822799 136008 136057 150301 150297 152004 121010 153002 132495 121300
1 2 2 1 1 1 1 1 1 3
Description #6-32 Pal Nut #10-16 x 1/2” Hex Washer TEK Screw #6-32 x 1-1/4” Phillips Pan Head Machine Screw 2-Position Terminal Block Rear Electric Mounting Plate ONLY Rear Electric Panel Assembly Complete - 230 Volt 1ø (includes illus. nos. 1 through 14) Transformer Assembly - 230 Volt 1ø Fuse Holder ONLY 1/2-Amp (Slo-Blo) Fuse ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #10 x 1/2” Green Hex Washer TEK Screw 5/16-18 Hex Nut L-70 Ground Lug 5/16” Lock Washer 3-Pole Contactor Open/Closed Bushing
Reversing Electric Relay Panel Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9 10 11 12 13 14
150300 150008 120701 132497 822784 136008 136057 150301 150297 152004 121010 153002 132495 322812 822783
2 2 1 1 1 1 1 3 1 1 1 1 1 1 1
15 16
151000 120765
2 1
Description #10-16 x 1/2” Hex Washer TEK Screw #6-32 x 1-1/4” Phillips Pan Head Machine Screw 4-Position Terminal Block 3-Pole Reversing Contactor Transformer Assembly - 415 Volt 3ø Fuse Holder 1/2-Amp (Slo-Blo) Fuse ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #10 x 1/2” Green Hex Washer TEK Screw 5/16-18 Hex Nut L-70 Ground Lug 5/16” Lock Washer 3-Pole Contactor Rear Electric Mounting Plate ONLY Rear Electric Panel Assembly Complete - 415 Volt (includes illus. nos. 1 through 16) #6-32 Pal Nut Standard End Bracket
17
18
Non-Reversing Motor Mount Assembly
Non-Reversing Motor Mount Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8
100178 100701 101130 150501 153002 153001 181050 122701 122801 137030 152004 153002 153001 117600 154000 850018 801824
1 1 1 4 4 4 1 8 1 1 4 4 4 4 4 1 1
153051 882670 100714 153050 152006
1 1 1 2 2
9 10 11 12 13 14 15
16 17 18 19 20
Description 4L-570 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key 5/8” x 2-1/2” Motor Pulley (50 Hz Only) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1 HP 200-240v 1Ø 50 Hz Motor with Plug (56Z frame) Socket Terminal Pin/Socket Extraction Tool 8-Pin Housing Connector 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Noise Suppressor Tape (sold by the foot) 5/16-18 Tinnerman Nut Non-Reversing Motor Mount ONLY (56Z frame) 1 HP 200-240v 1Ø 50 Hz Motor Mount Assembly with Plug Complete (includes illus. nos. 2 through 7 and 13 through 20) 3/4” S.A.E. Flat Washer 16” Impellor with 3/4” Bore 3/16” x 3/16” x 1-7/8” Key 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut
19
20
Reversing T.E.F.C. Motor Mount Assembly
Reversing T.E.F.C Motor Mount Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5*
100178 100701 101130 120200 181003
1 1 1 1 1
6 7 8 9*
150501 153002 153001 100075
4 4 4 1
10 11 12 13 14 15 16 17 18
120200 150501 153002 153001 154000 152004 153002 153001 850021 804030
1 4 4 4 8 7 4 4 1 1
19 20 21 22 23 24
117600 153050 100714 882670 153050 152006
4 1 1 1 ** 2
21
Description 4L-570 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key 5/8” x 2-1/2” Motor Pulley (50 Hz Only) 3/8” x 90º Connector 1/2 HP 208/230/380/460v 3Ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) 56Z Frame 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1 HP 220/230/380/460v 3Ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor with 3/4” Shaft (56Z frame) 3/8” x 90º Connector 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16” Tinnerman Nut 5/16” Hex Nut 5/16” Lock Washer 5/16” Flat Washer Reversing Motor Mount ONLY (56Z frame) Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (for 50 Hz models Only) (includes illus. nos. 2 through 14 and 18 through 24) Noise Suppressor Tape (sold by the foot) 1/2” S.A.E. Flat Washer 1/8” x 1/8” x 1-1/2” Key 16” Impellor with 3/4” Bore 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut
* Specify voltage when ordering. ** As required.
22
Direct Spark Ignition (DSI) Burner Assembly For models mfd. as of July 1, 2002
Direct Spark Ignition (DSI) Burner Assembly For models mfd. as of July 1, 2002
Illus. No.
Part No.
Qty.
1
817214*
1
817215*
1
15 16 17 18 19 20 21 22
883298** 318402 150309 810030 128941 141105 150103 153000 151001 140853 140810 141232 318700 150300 128933 883255 881367 142809 323737 319704 151000 150001 130201 ---------
1 1 5 1 1 3 3 3 3 3 3 1 2 2 1 1 1 1 1 1 2 2 1 1
23 24 25 26 27 28 29
143000 150309 150309 151001 150309 150309 809309
1 2 2 2 3 3 1
2 3 4 5 6 7 8 9 10** 11 12 13 14
Description Natural Gas Burner Assembly Complete Less Orifices (includes illus. nos. 1 through 9 and 11 through 29) For Models Mfd. with Natural Gas ONLY Liquid Propane (L.P.) Gas Burner Assembly Complete Less Orifices (includes illus. nos. 1 through 9 and 11 through 29) For Models Mfd. with L.P. Gas ONLY Burner Liquid Propane (L.P.) Conversion Kit Burner Box Front ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Direct Spark Ignition (DSI) Module Mounting Bracket Direct Spark Ignition (DSI) Module Large Burner Tube #8-32 x 1/2” Phillips Round Head Machine Screw #8 Steel Burr #8-32 Pal Nut #23 Burner Orifice (natural gas) ONLY #42 Burner Orifice (liquid propane [L.P.] gas) ONLY 3-Port Manifold Pipe Bracket #10-16 x 1/2” Hex Washer TEK Screw 1/2” 24 VAC Redundant (natural gas) Gas Valve 1/2” 24 VAC Liquid Propane (L.P.) Gas Valve Assembly 1/2” Union Shut Off with Tail Piece 1/2” x 29-1/8” Nipple Pipe Bracket Hi-Limit Mounting Bracket #6-32 Pal Nut #6-32 x 1/2” Phillips Round Head Machine Screw 330º F Hi-Limit ONLY Sail Switch (refer to Sail Switch Assembly on page 26) 3/4” to 1/2” Reducing Coupling #10-16 x 1/2” Hex Head TEK Crimptite Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw #8-32 Pal Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Ignition Probe Assembly with High Voltage (HV) Wire
* Burner orifices are not included and must be ordered separately. ** Consult factory for elevations over 2,000 feet.
23
24
Hot Surface Ignition (HSI) Burner Assembly For models mfd. prior to July 1, 2002
Hot Surface Ignition (HSI) Burner Assembly For models mfd. prior to July 1, 2002
Illus. No.
Part No.
Qty.
1
801788*
1
883340*
1
15 16 17 18 19 20 21 22
801768 318403 150309 810029 128975 141105 150103 153000 151001 140828 140810 141232 318700 150300 128933 883255 141314 142809 318700 319704 151000 150001 130201 --------
1 1 5 1 1 3 3 3 3 3 3 1 2 2 1 1 1 1 1 1 2 2 1 1
23 24 25 26 27 28 29 30 31
142936 150309 150309 151001 150309 128921 150301 881597 150309
1 2 2 2 3 1 1 1 1
2 3 4 5 6 7 8 9 10** 11 12 13 14
Description Natural Gas Burner Assembly Complete Less Orifices (includes illus. nos. 1 through 9 and 11 through 29) For models mfd. with Natural Gas ONLY Liquid Propane (L.P.) Gas Burner Assembly Complete Less Orifices (includes illus. nos. 1 through 9 and 11 through 29) For models mfd. with Liquid Propane (L.P.) Gas ONLY Burner Box ONLY Burner Box Front ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Hot Surface Ignition (HSI) Module Mounting Bracket Hot Surface Ignition (HSI) Module II Large Burner Tube #8-32 x 1/2” Phillips Round Head Machine Screw #8 Steel Burr #8-32 Pal Nut #20 Burner Orifice (natural gas) ONLY #42 Burner Orifice (liquid propane [L.P.] gas) ONLY 3-Port Manifold Pipe Bracket #10-16 x 1/2” Hex Washer TEK Screw 1/2” 24 VAC Redundant (natural gas) Gas Valve 1/2” 24 VAC Liquid Propane (L.P.) Gas Valve Assembly 1/2” Union Shut Off with Tail Piece 1/2” x 29-1/8” Nipple Pipe Bracket Hi-Limit Mounting Bracket #6-32 Pal Nut #6-32 x 1/2” Phillips Round Head Machine Screw 330ºF Hi-Limit ONLY Sail Switch (refer to Sail Switch Assembly on page 26) 3/4” to 1/2” Reducing Coupling #10-16 x 1/2” Hex Head TEK Crimptite Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw #8-32 Pal Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw Hot Surface Ignition (HSI) Flame Sensor #8-18 x 7/16” Phillips Pan Head TEK Screw Hot Surface Ignition (HSI) 2-1/2” length - 24 VAC #10-16 x 1/2” Hex Head TEK Crimptite Screw
* Burner orifices are not included and must be ordered separately. ** Consult factory for elevations over 2,000 feet.
25
Sail Switch Assembly
26
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9
319203 319202 319201 319200 154004 154002 150309 150303 122200 881706
1 1 1 1 1 1 4 2 1 1
10
105500
1
Description Sail Switch Mounting Bracket Sail Switch Damper (flat) Sail Switch Box Cover Sail Switch Box Twin Speed Nut 1/8” Push On Fastener #10-16 x 1/2” Hex Washer TEK Crimptite Screw #4 x 3/4” Pan Head “A” Machine Screw Sail Switch ONLY Sail Switch Box Assembly Complete (includes illus. nos. 1 through 10) Sail Switch Actuator Rod
S.A.F.E. Temperature Probe Assembly
Illus. No.
Part No.
Qty.
1
822752
1
2 3 4 5
154007 390390 150301 122647
2 1 2 1
Description Sensor Activated Fire Extinguishing (S.A.F.E.) Temperature Probe Assembly (includes illus. nos. 1 through 5) Push On Fastener Sensor Bracket ONLY #8-18 Phillips Pan Head TEK Screw Connector ONLY
27
S.A.F.E. Solenoid and Piping Assembly
28
Illus. No.
Part No.
Qty.
1
165114
1
2 3 4 5 6 7 8 9 10 11 12 13
143220 143251 143208 143099* 311588 143303 143155 150430 150301 143581 142888 824081
1 1 2 6’ 1 1 1 2 2 1 1 1
*
Sold by the foot.
Description Sensor Activated Fire Extinguishing (S.A.F.E.) Solenoid and Piping Valve 24V 50/60 Hz 3/8” F.P.T. Brass Tree 3/8” M.P.T. Brass Plug 3/8” Comp x 3/8” M.P.T. Brass Connector 3/8” OD x 0.035 Wall Copper Tubing Sprinkler Head Mounting Plate 3/8” N.P.T. Brass Locknut 3/8” Brass Elbow 90° #10 x 1/2” Self Drilling Screw #8-18 x 7/16” TEK Screw 3 GPM 3/8” F.P.T. Spray Nozzle 1/2” to 3/8” Bushing R.C. Network Assembly
Back Guard Assemblies
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9
314501 150301 322809 150301 150301 150301 314738 314737 882099
1 12 1 4 7 12 1 1 1
29
Description Bottom Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw Rear Electrical Box Cover #8-18 x 7/16” Phillips Pan Head TEK Screw #8-18 x 7/16” Phillips Pan Head TEK Screw #8-18 x 7/16” Phillips Pan Head TEK Screw Top Back Guard Outer Top 8” to 10” Increaser
30
Additional Parts Available
Part No.
Description
114533 114001 114521 114006 114094 121499 121500 122804 404502 410001 882458
“120V Electric Service” “CAUTION - Exhaust/Lint Screen” Label “Phase 7 OPL Program Location Summary” Label “WARNING - Fire Hazards” Label “MOP HEAD WARNING” Label 5-1/2” Harness Tie 8” Harness Tie Manometer (hydro gauge) for Measuring Gas Pressure White Brush-In-Cap Bottle Touch-Up Paint 1/2” Allen Wrench (for removal of shutoff valve tail piece) Basket (tumbler) Puller Assembly
450593
1 - 09/26/02-13
