Transcript
Retired
QuickSpecs
Compaq Power over Ethernet Injectors 12-Port
Overview
Models 230612-001 US 230612-011 Australia 230612-021 Europe 230612-031 UK 230612-061 Italy 230612-081 Denmark 230612-111 Switzerland 230612-291 Japan 230612-AA1 China 230612-AD1 Korea 230612-AR1 South Africa
Introduction Power over Ethernet is a new feature of the Compaq Wireless LAN offering that provides an efficient alternative for installing wireless networking equipment. By eliminating the need for power blisters (ac-to-dc converters) and 110/240 VAC power outlet installation, a system installer need only run a single standard Cat 5 twisted pair cable, instead of separate power and Ethernet cable, to each access point. The Power Injectors are typically installed in the wiring closet, and ²inject² DC power onto the Ethernet cable. The injectors constantly check the Ethernet cable for a device that can handle Power over Ethernet. If it does not detect such a device, the device switches off power for that port. This power-monitoring capability protects other devices connected to the Ethernet cable as well as the input port of the switch in case of an installation error.
Compatibility Compaq WL410 SMB Access Point Compaq WL510 Enterprise Access Point
Service and Support Compaq Power over Ethernet Injectors has a one-year limited warranty. Technical support is available seven days a week, 24 hours a day, by phone as well as online support forms. Certain restrictions and exclusions apply.
DA - 10828
Worldwide — Version 2 — September 17, 2003
Page 1
Retired
QuickSpecs
Compaq Power over Ethernet Injectors 12-Port
Technical Specifications Features
Provides power to the infrastructure device over the Ethernet cable Remote Power Feeding - Access Point receives power over the Ethernet cable Centralized Power Distribution - Multiple access points can be connected to a single PoE Injector Smart Ethernet Wiring - PoE Injector acts as a normal patch panel and places ˜ 48.0 VDC on unused Ethernet pins Automatic Load Sensing - Power control circuitry automatically detects Power Over Ethernet on access point before providing power
Number of Users
12
Data Rates
10/100 Mb/s
Power over LAN Output Specifications
Pin Assignments
4/5, 7/8
Output Power Voltage
-48Vdc
User Port Power
16W (maximum), (-48Vdc)
Aggregate Power
192W (-48Vdc)
Input Power Requirements AC Input Voltage: 90 - 264Vac AC Frequency: 47 - 63Hz Input Power
300W, (-48Vdc)
AC Input Current
3.5A at 100Vac, 1.8A at 240Vac, (-48Vdc)
Thermal Rating
225 BTU (-48Vdc)
Volt Amperes Rating
0.35 KVA, (-48Vdc)
Dimensions (HxWxD)
2.6 x 17.2 x 11.8 in (6.6 x 43.7 x 30 cm)
Weight
11 lbs (5 kg)
Management (LED Display)
V.24/RS-232
Main Indicator
AC Power (Green), Alarm (Orange)
User Indicator
Channel Power (Green), Alarm (Orange)
Connectors
Shielded RJ-45 EIA 568A and 568B DB-9, Female (Management)
Environmental Conditions Operating Temperature
32° to 104° F (0° to 40° C)
Operating Humidity
Maximum 90% non-condensing
Storage Temperature
-13° to 185° F (-25° to 85° C)
Storage Humidity
Maximum 95% non-condensing
Operating Altitude
-1000 to 10,000 ft (-304.8 to 3048 m)
Regulatory Compliance
CE Compliance
Electomagnetic Emission and Immunity
FCC Part 15 Class B EN55022 Class B (Emission) EN50082-1 (Immunity)
Safety Approval
UL 1950 CSA C22.2 No. 950 EN 60950 TUV EN 60950
© Copyright 2003 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
DA - 10828
Worldwide — Version 2 — September 17, 2003
Page 2
