Transcript
DATA SHEET
DA 26S DISTRIBUTION AMPLIFIER WITH PAGING
PRIORITY DETECT
GAIN
MIN MAX OL
ON +4 dBu ACTIVE
Features
AGC DUCKER
TARGET LEVEL
-80
-12
dB
0
+12 dBu
CROSSOVER
RATIO
1:1
OUTPUTS
1
FREQUENCY
GAIN
:1 SLOW
FAST
-12 -6
-3
0
-12 3
6
12
Balanced line input (background music) Automatic Gain Control Target Level - Ratio - Attack/Decay - Gain meter Adjustable 24 dB per octave Linkwitz-Riley Crossover 80 – 110 – 150 – 200 Hz 6 Balanced outputs Full-range, high-pass and low-pass source selection Loudness compensation for low-pass outputs Front panel Level control for each output Wired DC Level Remote Control port Optional VR 1 Remote Level Control Priority mic/line paging input Remote assignment of priority input to any outputs Automatic gating with adjustable threshold Page ducker range of 0 to –80 dB Mic-line mixing Paging talks over music Priority replaces music Optional SC 1.7 security cover European-style terminal block connectors (Euroblocks) Internal universal switching power supply (100-240 VAC)
80 110
150 200
2 +12
FULL HIGH LOW
-12
3 +12
FULL HIGH LOW
-12
4 +12
FULL HIGH LOW
-12
5 +12
FULL HIGH LOW
-12
6 +12
FULL HIGH LOW
-12
DA 26S
DISTRIBUTION PROCESSOR
+12
FULL HIGH LOW
POWER
General Description Do you have a paging and background music application that would benefit from a low cost, one-box solution? The DA 26S provides all of the tools needed to serve up to six zones. For even greater flexibility in source selection and zone distribution, combine the DA 26S with a Rane CP 52S or CP 64S music and paging preamplifier. Many existing solutions require installers to employ separate paging preamplifier, dynamics processor, crossover, distribution amplifier and remote-level-control devices. These systems are expensive and require a lot of wiring, yet fail to meet all of the requirements. The DA 26S provides all of the required features in one compact package. The DA 26S routes a mono program source and priority/ page source to as many as six zones. The mono program source is processed by an Automatic Gain Control (AGC) circuit featuring adjustable target level, ratio and attack/decay. The priority/page input features automatic signal detection and remote zone assignment. A means of automatically attenuating program music over a range of 0 dB to –80 dB during a page allows mic/line mixing, talk-over or priority-replaces-program operation. Each of the six outputs distributes full-range, high-pass or low-pass program music. Small bookshelf or hanging speakers frequently require bass enhancement. Bass enhancement is achieved by adding bass to the full range response or by employing a true bi-amp system. The DA 26S provides a 24 dB per octave Linkwitz-Riley crossover that supports both bass enhancement schemes. Wired remote level control ports allow independent control of music amplitude in each zone. Loudness compensation is automatic when a remote is used. Remote level controls do not influence the priority/page level. It is possible to control multiple remote level ports with a single remote device. This allows one remote device to control the level in multiple zones or both high-pass and low-pass outputs in a single zone.
Data Sheet-1
DA 26S DISTRIBUTION AMPLIFIER WITH PAGING Specifications Parameter Priority Input: .....Input Impedance (mic/line) .....Max Input (mic/line) .....Gain Range (mic/line) .....Frequency Response .....Equiv. Input Noise (mic) .....Noise (line) .....CMRR .....Overload Indicator .....Detect Threshold .....Ducker Depth Control .....Priority Assign Inputs Program Line Input: .....Input Impedance .....Gain .....CMRR Automatic Gain Control: .....Target Range .....Threshold ....Gain Reduction Time Constant ....Gain Increase Time Constant .....AGC Release .....Ratio .....Gain Meter Crossover: Frequency Outputs: .....Output Impedance .....Gain .....Frequency Response .....Noise .....THD+N .....Maximum Output Remote Level Ports: .....Voltage Range .....Gain Control Law .....Gain Range Agency Listing Universal Line Voltage Unit: Construction ..........Size ..........Weight Shipping: Size ..........Weight Note: 0 dBu=0.775 Vrms
Data Sheet-2
Specification Active Balanced 511 / 14.5k -10 / +20 30 to 60 / 0 to 30 10 Hz to 20 kHz -116 -80 40 4 on to +4 0 to -80 5V TTL active low or simple switch closure to ground Active Balanced 10k 0 40
Limit
Units
Conditions/Comments 3-pin Euroblock connector Each leg to ground, 1 kHz Source res. 150 Ω, 1 kHz Source res. 150 Ω, 1 kHz minimum gain 150 Ω, gain 60 dB, BW 22 kHz 150 Ω, gain 0 dB, BW 22 kHz 150 Ω, gain 60 dB, BW 22 kHz Before clipping, 1 kHz 1 kHz 1 kHz Euroblock 8-pin passive internal pullup
1% min ±2 +0,-.5 typ typ min typ typ typ
Ω dBu dB dB dBu dBu dB dB dBu dB VDC
1% ±0.5 min
Ω dB dB
-12 to +12 26 dB below target 230/11 1100 11 0:1 to infinity:1 -12, -6, -3, 0, +3, +6, +12 80, 110, 150, 200
±1 ±1 20% 20% 20%
dBu dBu ms ms sec.
1 8%
dB Hz
100 +12 to -12 20 Hz to 20 kHz -88 0.05 22 Wired DC control 0 to 5 50 mV per dB 0 to -80 UL/cUL/CE 100-240 VAC, 50/60 Hz All Steel 1.75"H x 19"W x 5.3"D (1U) 4 lb 4.25" x 20.3" x 13.75" 8 lb
1% ±2 +0,-.5 typ typ min
Ω dB dB dB % dBu
5% 5% min
VDC
3-pin Euroblock connector Each leg to ground, 1 kHz 1 kHz Source res. 150 Ω, 1 kHz Log average detector, soft knee Level the AGC circuit is seeking The level below target when AGC starts Slow/fast Fixed Return to unity when >26 dB below target soft knee action Indicates AGC level control 24 dB/octave Linkwitz-Riley Active balanced, 3-pin Euroblocks Each leg to ground 1 kHz Unity gain, 2k ohm load Unity, 2k load, BW 22 kHz, re +4 dBu 0 dBu, 20 Hz to 20 kHz, unity gain 1 kHz, 10 kΩ load Euroblock 3-pin connector Source impedance 100 Ω
dB
1 kHz 7 watts; Uses C5 cord with C6 inlet (4.4 cm x 48.3 cm x 13.3 cm) (2 kg) (11 cm x 52 cm x 35 cm) (4 kg)
DA 26S Block Diagram + -
OL GAIN TRIM
+ -
PRIORITY/PAGE INPUT
30
Vref
60
Vref
LINE PAD 30
DUCKER -80 0 DEPTH (dB)
ON +4 DET. (dBu)
GND +5
FILTER
Vc
-12 +12 CH1 LEVEL
GND
+ -
ACTIVE
COM
ALL PAGE
AGC
ZONE 3
ZONE 2 OUTPUT
Vref Vref
PRIORITY SELECT LOGIC
ZONE 2
FILTER
Vc
-12 +12 CH2 LEVEL
ZONE 4
+ -
ZONE 6
ZONE 3 OUTPUT
SHIELD
AGC
Vref Vref
4th-ORDER LINKWITZ-RILEY CROSSOVER
LINE INPUT
FILTER
Vc
-12 +12 CH3 LEVEL
HIGH-PASS
+ -
LOW-PASS
GND
COM
80 Hz 110 Hz 150 Hz 200 Hz
ZONE 4 OUTPUT
SHIELD
AGC A B
Vref Vref Vc
FILTER -12 +12 CH4 LEVEL
ZONE 5 OUTPUT
SHIELD
AGC
Vref Vref FILTER
AGC
Vc
-12 +12 CH5 LEVEL
+ -
RATIO (1:1 to Infinity:1)
ZONE 6 OUTPUT
SHIELD
AGC
Vref Vref Vc
FILTER -12 +12 CH6 LEVEL
DA 26S Application Example DA 26S
PAGE MIC
(MIC OR LINE)
PRIORITY/ PAGE INPUT
OUTPUT
ZONE 1 AMP
1
ZONE 1 AMP
2 ALL Z1 Z2 Z3 Z4 Z5 Z6
PAGE ASSIGN SWITCHES
VR 1
LEVEL 4
6
0
10
2
8
LOW PASS
REMOTE LEVEL
OUTPUT
ZONE 2 AMP
3
FULL RANGE
VR 1
LEVEL 4
6
0
10
2
8
REMOTE LEVEL
OUTPUT
ZONE 3 AMP
4
FULL RANGE
VR 1
LEVEL 4
6
0
10
2
8
REMOTE LEVEL OUTPUT
5 PROGRAM SOURCE CD, DVD, SAT
HIGH PASS
ZONE 6 RMT LVL
GND
REMOTE LEVEL OUTPUT
GND
ZONE 5 RMT LVL
GND
FAST/SLOW TARGET LEVEL (-12 to +12 dBu)
ZONE 4 RMT LVL
GND
+ -
GAIN (dB) -12 -6 -3 0 3 6 12
ZONE 3 RMT LVL
GND
+ -
ZONE 2 RMT LVL
GND
ZONE 5 FULL-RANGE
ZONE 1 RMT LVL
SHIELD
ZONE 1
PRIORITY ASSIGN
ZONE 1 OUTPUT
SHIELD
AGC
ZONE 4 AMP
FULL RANGE
VR 1
LEVEL 4
6
0
10
2
8
REMOTE LEVEL
LINE INPUT
OUTPUT
6
FULL RANGE - MUSIC ON HOLD
VR 1
LEVEL 4
6
0
10
2
8
REMOTE LEVEL
Data Sheet-3
DA 26S DISTRIBUTION AMPLIFIER WITH PAGING Rear Panel DA 26S 100-240 V 50/60 Hz 7 WATTS
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES FOR A CLASS 'B' COMPUTING DEVICE. COMMERCIAL AUDIO EQUIPMENT 24TJ
RMT R
6
OUT
RMT
5
OUT
RMT
4
OUT
RMT
3
OUT
RMT
2
OUT
RMT
1
LINE INPUT
OUT
PRIORITY ASSIGN
Vr Vc
+
−
Vr Vc
+
−
Vr Vc
+
−
Vr Vc
+
−
Vr Vc
+
−
Vr Vc
+
−
+
−
Z1 Z2 Z3 Z4 Z5 Z6 ALL
Vr Vc
+
−
Vr Vc
+
−
Vr Vc
+
−
Vr Vc
+
−
Vr Vc
+
−
Vr Vc
+
−
+
−
Z1 Z2 Z3 Z4 Z5 Z6 ALL
PRIORITY INPUT LINE
+
−
+
−
MIC MADE IN U.S.A. RANE CORP.
ACN 001 345 482
Arhchitectural Specifications The DA 26S shall provide a balanced, line-level, music input with automatic gain control featuring adjustable target level, ratio and response time. A seven-segment meter shall indicate the amount of gain modification over a range of -12 dB to +12 dB. A 4th-order Linkwitz-Riley crossover shall provide three music signal outputs: full-range, high-pass and low-pass. The crossover shall have the ability to select any of four crossover points: 80, 110, 150 or 200 Hz. The unit shall have six balanced outputs. Each output shall have the ability to select the full-range, high-pass or low-pass crossover signal as its source. A means to adjust each output level over a range of ±12 dB shall be provided on the front panel. The unit shall provide a remote level control port for each of the six outputs. The range of control shall be 0 to -80 dB. The remote port topology shall allow ganging any number of ports to a single remote device. Remote level control of low-pass outputs shall include Loudness compensation. Priority/Page input shall be provided. This input shall accommodate microphone or line-level signals. Line-level gain
shall have a range of 0 dB to 30 dB. Microphone gain shall have a range of 30 dB to 60 dB. Automatic threshold detection shall have a sensitivity adjustment range of +4 dBu to ON. A priority assign port shall provide a means of routing the priority input to any combination of zone outputs. When the Page/Priority signal exceeds the set threshold, an “active” indicator lights, the input signal routes to selected zone(s) and the music ducking circuit is enabled for selected zone(s). Automatic music attenuation shall be adjustable from 0 to -80 dB. Front panel and remote output level controls shall not influence the Priority/Page signal. The unit shall mount in a standard 19-inch rack and occupy 1U. The unit shall accommodate an optional SC 1.7 single space security cover. All input and output connections shall be made via European-style terminal blocks. The unit shall be capable of operation by means of its own built-in universal power supply operating at 100-240 VAC and meet CE requirements. The unit shall be UL and cUL listed. The unit shall be entirely constructed from cold-rolled steel. The unit shall be a Rane DA 26S Distribution Amplifier.
Available Accessories • VR 1 Remote Control • SC 1.7 Single Space Security Cover
Use up to 6 optional VR 1 Remotes, one for each output.
GND Vc
LEVEL
Vr
4
6
0
10
2
8
©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5098 TEL 425-355-6000 FAX 425-347-7757 WEB www.rane.com
Data Sheet-4
All features & specifications subject to change without notice. DOC 110957
