Transcript
DA-868
Antenna splitter for 4 UHF wireless system receivers. It improves the aerial signal reception if the receivers are in racks. It uses 2 front antennas to divide the antenna signal to 4 receivers. Just one AC/DC supplier can be used for 4 receivers, avoiding uncomfortable mountains of cable. Several splitters can be used in series.
FREQUENCY
UHF 600-950 MHz
GAIN
3 dB ± 0.5 dB
OUTPUTS
Antenna: 2 inputs, female TNC 50 Ohm With power supply for aerial amplifier, mod. AMP-800S, 8 V DC 80 mA Power supply: 1 input, 12 V DC 5 A Antenna: 2 outputs in loop and 8 outputs for receivers, female 50 Ohm TNC Power supply: 4 outputs for receivers, 12 V DC 1A
DIMENSIONS
420 x 44 x 180 mm depth. 1x 19' U rack
WEIGHT
2.6 kg
ACCESSORIES
OPTIONAL
230 V AC adapter, 12 V DC 3 A Mounts for assembly in 1 U 19' rack and antenna installation on the front with female TNC female TNC connectors 2 x 0.5m cables, male TNC - male TNC, to connect the antenna to the divider 4 power supply cables with male DC connector to male DC connector AMP-811: antenna amplifier CAB-05M: antenna cable TNC male to TNC male, 0.5 m (2 cables per receiver are necessary)
COMPATIBILITY
For wireless FONESTAR systems, mods.MSHR-45, MSHR-46D, MSH-823 and MSH-828
INPUTS
� 2016 Copyright by FONESTAR SISTEMAS, S.A.
www.fonestar.com
P�gina: 1/1
