Preview only show first 10 pages with watermark. For full document please download

инструкция к потолочному кронштейну Da-cm2000 для купольных Ip-видеокамер серии Dc

   EMBED


Share

Transcript

DA-CM2000 INSTALLATION MANUAL This manual is intended for users of the DA-CM2000 ceiling mounting bracket. It includes instructions for mounting the DA-CM2000 ceiling mounting bracket to a ceiling. • This bracket is intended to be used with DC-D1xxx or DC-D2233 series model of cameras. Do not use it with other models of cameras. • This installation should be performed by a qualified service personnel in conformance to all local codes. • You may need to reinforce the ceiling. If the ceiling is not strong enough to support the camera, the camera may fall. • Do not use this product for other purposes. Mounting Mount the bracket to the ceiling as follows: Insert cables from external devices, network and power adapter into base. 2 Mount base to the ceiling by using the anchors and screws. Or, mount bracket 1 to the ceiling and then the base to bracket 1 by using the anchors and screws. Ceiling 84mm (3.31”) 84mm 1 Ø 6.5mm (0.26”) Ø 30mm (1.18”) Hole Ø25~30mm Base Bracket 1 Screw 4X25, 4EA Screw 4X25, 4EA Base Hexagon Socket 5X10, 4EA 3 Insert cables from external devices, network and power adapter through the ceiling pipe. 4 Assemble the ceiling pipe into the base. 5 Insert cables from external devices, network and power adapter into bracket 2. 6 Assemble bracket 2 into the ceiling pipe and fix it by using the screws. Screw Set M8X8, 2EA Base Screw Set M8X8, 2EA Ceiling Pipe Bracket 2 Connect your camera to the bracket as follows: 7 If you have a DC-D1xxx series model of camera, screw the bottom cover onto an adaptor plate (DA-AP2000 model) and the adaptor plate onto bracket 2. The adaptor plate is sold separately. < DC-D1xxx Series > If you have a DC-D2233 series model of camera, screw the camera body onto bracket 2. 8 Connect or screw the camera dome cover onto the camera body or bottom cover. 9 Turn on power. Bracket 2 Bracket 2 DA-AP2000 Bottom Cover Camera Body < DC-D1xxx Series > Bottom Cover Camera Body Camera Dome Cover Camera Dome Cover Dimensions Ø 99.5 (3.92) Ø 144.5 (5.69) Unit: mm (inch) When it is folded, 341 (13.43) When it is unfolded, 541 (21.3) IDIS Co., Ltd. For more information, please visit www.idisglobal.com Ver.1.0